Introduction The ARLTS series filter cartridge is made of hydrophobic PTFE micropore membrane as the filtering medium. It is manufactured by thermally fusing PTFE filter membrane and PP support material, without any adhesives. Its main features include strong hydrophobic, high retention rate, excellent chemical resistance and thermal stability. It maintains effective filtration effect for corrosive solvents and strong oxidizing liquids. The double-layer membranes formula can better improve the filtration efficiency. Its biological safety and endotoxin indexes meet FDA requirements and Chinese Pharmacopoeia standards. All products have passed integrity tests of the instrument. Specification Filter material: Hydrophobic PTFE micropore filter membrane (single/double layer) Diameter: 69, 83 mm Pore size: 0.1 ~ 3 micron Length: 5" ~ 60" Interface type: 222, 226, 215, 213, DOE Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Chemical industry: Terminal filtration for organic solvents, inorganic solvents, chemical reagents, etc. Food Industry: Terminal filtration for clarification of liquor, beverages, wines, fruit wines, removal of microorganisms and fine particles, etc. Gas Industry: Gas filtration, sterile storage tank respirator, air fermentation tanks, etc.
Introduction The ARLTQ series filter cartridge is made of hydrophilic PTFE micropore membrane as the filtering medium. It is manufactured by thermally fusing PTFE filter membrane and PP support material, without any adhesives. It is suitable for the chemical and pharmaceutical industry with strict requirements. Its main features include stable hydrophilic, high retention rate, excellent chemical resistance and thermal stability. It does not require pre-wetting when filtering solvents with high water content. The double-layer membranes formula can better improve the filtration efficiency. Its biological safety and endotoxin indexes meet FDA requirements and Chinese Pharmacopoeia standards. All products have passed integrity tests of the instrument. Specification Filter material: Hydrophilic PTFE micropore filter membrane (single/double layer) Diameter: 69, 83 mm Pore size: 0.1 ~ 3 micron Length: 5" ~ 60" Interface type: 222, 226, 215, 213, DOE Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Pharmaceutical Industry: Sterile active pharmaceutical ingredients, sterilization filtration of pharmaceutical liquids, etc. Chemical Industry: Filtration of hydrophilic organic solvents, inorganic solvents, chemical reagents, etc. Food Industry: Filtration of alcohol, beverage, etc.
Introduction The ARLE series micropore filter cartridge is made of PES micropore membrane as the filtration medium. The uniquely shaped and evenly distributed micropores cover more than 85% of the membrane area, ensuring high filtration efficiency and stability. This product exhibits excellent hydrophilic, is free from surfactants, and features efficient antibacterial properties, low adsorption, high mechanical strength, as well as resistance to high temperatures and pressures. It can withstand multiple cycles of steam sterilization. The double-layer filter membrane formula can better improve the filtration effect. All products have passed the integrity test of the instrument. Specification Filter material: PES micropore filter membrane (single / double Layer) Diameter: 69, 83 mm Pore size: 0.1 ~ 1 micron Length: 5" ~ 60" Interface type: 222, 226, 215, 213, DOE Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Suitable for terminal filtration in pharmaceutical, biological products, microelectronics, semiconductor, chemical and other industries.
Introduction The ARSP series micropore membrane filter cartridge is made of PP microfiber as the filtration medium. The product is formed by folding the combination of multi-layer filter membranes, achieving a stable deep filtration effect. In order to meet the market demand for high-flow filtration, the product increases the effective filtration area of the membrane. It has the characteristics of high flow rate, long service life, stable structure and wide chemical compatibility, which are conducive to enhancing the filtration efficiency of liquids. It is mainly used for liquid filtration in large-scale LCD and touch panel processes, such as substrate cleaning, stripping, etching, developer and deionized water rinsing, etc. It also meets the demand for large flow rates in the chemical and food industries. Specification Filter material: PP micropore filter membrane Diameter: 131 mm Pore size: 0.1 ~ 60 micron Length: 10" ~ 60 " Interface type: 334 Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Electronics industry: Wet processing of LCD and touch panels, semiconductor process, wet equipment chemical reagent Chemical industry: Chemical solvents Food industry: Beverage, alcohol
Introduction The ARLP series micropore filter cartridge is made of PP microfiber as the filtration medium, and the filtration material meets the relevant FDA requirements. The product is formed by folding the combination of multi-layer filter membranes, achieving a stable deep filtration effect. Its main features include low filtration resistance, high dirt-holding capacity, long service life, stable structure, wide chemical compatibility, etc. It is suitable for pre-filtration of various liquids. Specification Filter material: PP micropore filter membrane Diameter: 69 mm Pore size: 0.1 ~ 60 micron Length: 5" ~ 60 " Interface type: 222, 226, 215, 213, DOE Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Primary filtration of filtration systems in the pharmaceutical, chemical solvent, food and beverage, microelectronic industries, pure water systems, petrochemical and other industries.
Introduction The filtration medium of ARWP series micropore membrane filter cartridge is made of PP superfine fiber membrane. It is formed by folding the combination of multi-layer filter membranes and thermally welding into 6-inch large diameter structure, providing large filtration area for stable deep filtration effect. This product is available in both external and internal pressure types, featuring high efficiency retention and high liquid flux, widely used in security filtration and pre-filtration across various industries. Specification Filter material: PP micropore filter membrane Diameter: 6" (152mm) Pore size: 1 ~ 80 micron Length: 20", 40", 60" Interface type: Multiple interface selections Gasket/O-rings: Silicone, EPDM Application General industry: Filtration of workshop water for various production processes, etc. Electronics industry: Pre-filtration for reverse osmosis systems, pre-filtration for deionized water, etc. Power plants: Filtration of makeup water, condensate water, cooling water, wastewater treatment, etc.
Introduction The ARTX series filter cartridge uses high-quality polyacrylonitrile as the raw material, which is high-temperature carbonized into powdered fibers in a high-purity inert gas environment. Through special formulation and surface design, it enhances the ability to adsorb suspended solids and precipitated particles in liquids, achieving deep filtration effect. This product performs excellently in chlorine removal, purification and decolorization, adsorption of organic compounds and metal ion removal. Specification Filter material: Powdered activated carbon fiber Length: 5" ~ 40" Pore size: 5 ~ 100 micron (multi-micropore combination) Diameter: 65 mm Interface type: DOE Gasket/O-rings: TPE Application Chemical industry: Air purification, organic solvent decolorization Drinking water: Chlorine removal, odor removal, water purification Electronics industry: Water treatment purification, PCB electroplating, semiconductor FRAME electroplating solution, copper-nickel electroplating solution filtration, etc. Food industry: Filtration for beverages, clarification of wines, etc.
Introduction The ARTB series filter cartridge uses high-purity titanium powder as the raw material, processed through high-temperature vacuum sintering. It features high porosity, uniform pore size distribution, and unique capabilities to withstand temperatures up to 300 degrees Celsius (in wet conditions) as well as strong acids and alkalis. This product is easy to backwash, enabling effective regeneration, and is suitable for separating and purifying various gases or liquid media. Specification Filter material: High-purity titanium Pore size: 0.22 ~ 100 micron Length: 5" ~ 40" Diameter: 60 ~ 100 mm Physical regeneration methods: a. Pure water backwashing b. Steam blowback c. Ultrasonic cleaning Chemical treatment methods: a. Alkaline washing b. Acid washing Interface type: 222, 226, 215, DOE, M20, M30, M36, M42 Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Pharmaceutical industry: Decarbonization and impurity removal filtration in the production of raw pharmaceutical materials. Chemical industry: Filtration of strong acidic and alkaline chemical solvents. Water treatment industry: Pre-filtration for reverse osmosis systems, seawater desalination, wastewater treatment systems, etc. Gas industry: Purification of compressed air and catalytic gases, filtration in ozone sterilization systems. Food industry: Clarification filtration for food and beverages, edible oils, soy sauce, vinegar, and other products.
Introduction The ARRP series filter cartridge uses odorless and non-toxic PP as raw material. It is formed into a tubular filter cartridge through a process involving heating, melting, spinning, pulling, and molding. This product adopts a progressive process and a design of outer sparse and inner dense, which can maintain a stable flow rate and show excellent deep filtration effect. Its main features include low resistance, high dirt holding capacity, corrosion resistance and strong chemical compatibility. Specification Filter material: PP Diameter: 61 ~ 114 mm Pore size: 1 ~ 100 micron Length: 5" ~ 60" Interface type: 222, 226, 215, DOE Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Suitable for solution filtration of larger particles in various industries. Widely used in PCB, electroplating solution, pure water engineering, food and drinking water pre-filtration, etc.
Introduction The ARBP series micropore membrane filter cartridge is made of polypropylene microfiber as the filtration medium. The product is formed by folding the combination of multi-layer filter membranes, achieving a stable deep filtration effect. Its large diameter design increases the filtration area, effectively reducing the quantity of filter cartridges used and the frequency of replacements, thereby lowering production costs. Due to its high flow rate and large dirt-holding capacity, this product is widely used in the filtration of liquid chemicals in the manufacturing process of LCD and touch panel, such as substrate cleaning, stripping, etching and deionized water rinsing. Specification Filter material: PP micropore filter membrane Diameter: 83 mm Pore size: 0.1 ~ 60 micron Length: 10" ~ 60 " Interface type: 226 Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Electronics industry: Wet processing of LCD and touch panels, semiconductor process, wet equipment chemical reagent Chemical industry: Chemical solvents
Introduction The ARQS series filter housing is constructed from high-strength stainless steel materials (SUS316L or SUS304), achieving a sanitary-grade finish on both inner and outer surfaces through mechanical polishing. Its design is reasonable with a well-crafted structure, ensuring cleanliness and safety of the outlet. Using single or multiple PTFE filter cartridges as filtration elements can filter out particles and bacteria more than 0.02 micron from gas. Specification Material: SUS304, SUS316L Filter type: Gas Length(matched cartridge): 5" ~ 40" Filter specification: Single core or multi-core Application Suitable for biologicals, food, microelectronics industry, chemical industry and other fields with strict gas requirements, especially the purification and filtration of medium to large storage tank intake.
Introduction The honeycomb wire wound filter cartridge mainly uses PP, degreased cotton, and glass fiber as raw materials. a.The ARXF series honeycomb filter cartridge is mainly made of a PP reinforced skeleton and PP fiber threads by winding. b.The ARXT series honeycomb filter cartridge is made of degreased cotton utilizes yarn spun from processed and degreased natural cotton, wrapped around a PP or stainless steel porous skeleton. c.The ARXB series honeycomb filter cartridge, constructed with a stainless steel porous skeleton wrapped with glass fiber threads, is resistant to strong acids and alkalis, capable of withstanding temperatures up to 200 degrees Celsius, and suitable for filtration in environments with strong acids, strong alkalis, high temperatures, and high pressures. This series of products adopts a honeycomb structure with outer sparse and inner dense, which can effectively remove suspended solids and large particles of impurities in liquids. Specification Filter material: PP/degreased cotton/glass fiber Support frame material: PP/stainless steel Pore size: 1 ~ 100 micron Length: 5" ~ 60" Diameter: 61 ~ 105mm Interface type: 222, 226, DOE Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Chemical industry: Filtration of electroplating solutions, chemical raw materials, coating solutions. Electronics industry: Pre-filtration of circuit board production line.
Edible seeds from the peanut plant, used in cooking, oil production, and as a snack, known for their nutty flavor and health benefits. Origin India MOQ (Minimum Order Quantity) Price and Freight Size Dependent, Exact MOQ can be known at enquiry Lead Time Vendor Dependent, Exact Lead Time can be known at enquiry Payment Terms Please find payment terms on product quotation Shipping Information Enquire for Freight Information Company Information Modulus Trade Hub Grade Bold, Java Packaging 25 kg, 50 kg bags, customized packaging Shelf Life 1-2 years Certification ISO, FSSAI, Organic (if applicable) HS Code 12021010 Nutritional Information High in protein, healthy fats, vitamins E and B Purity 99%+ Germination Rate 85%+ Oil Content 40-50% Taste Nutty, slightly sweet Health Benefits Supports heart health, improves skin health, high in antioxidants
Production AR series PP precision filter is a professional filter developed and designed for the electronic componentsand chemical industry.The main body of the filter is made of PP material for injection molding. The main characteristics are acidand alkali resistance,high temperature resistance, corrosion resistance, idling resistance, no leakage, lownoise, high efficiency, wide filtration area, simple operation, easy cleaning and long service life. lt is widelyused in terminal filtration of electronic components and chemical industry. Item No.: AR-2005 Application: PCB, LED, Electroplating solution, organic solvent filtration Material: Polypropylene Product Size: 760*1420 mm Max Flow Rate: 150 L/mins Weight: 19.78 KG Filter cartridge Size: 20" X 5
Introduction The ARNS series stainless steel lined PTFE filter housing takes high-strength SUS304 as its body, all components inside are made of PTFE material, and all parts in contact with the liquid are lined with PTFE sheet. The product has excellent resistance to strong corrosion and high temperature and pressure, ensuring stable use in various special production environments. Specification Material: SUS304+PTFE Filter type: Liquid Length: 5" ~ 40" Filter specification: Single core or multi-core Application Suitable for chemical solvents, electronic chemicals, ultra-high purity solvents and other strong corrosive liquid filtration.
Introduction The ARXS series portable filter housing is constructed from stainless steel materials (SUS316L or SUS304). Its design is reasonable with a well-compacted structure. Depending on the specific requirements such as filtration media, temperature range and filtration accuracy, different types of filter cartridges can be selected accordingly. Because of its small size, the product is easy to install and clean, especially suitable for small factories, hospitals, hotels, household water filtration, etc. Specification Material: SUS304, SUS316L Filter type: Liquid Length: 10", 20" Filter specification: Single core Application Suitable for hospital water, household water, hotel water and small factories.
Introduction The ARYS series filter housing is constructed from high-strength stainless steel materials (SUS316L or SUS304), achieving a mirror finish of approximately 0.6m through mechanical polishing on both inner and outer surfaces. The structure of the stainless steel filter is well-designed, ensuring no sanitary dead corners in the housing, making it easy to install and clean, minimizing maintenance costs, and matching with filter cartridges of various materials and models. The product has excellent corrosion resistance, as well as high temperature and high pressure resistance, making it suitable for long-term use in various harsh environments. The corresponding specifications and dimensions can be customized according to the actual production needs of various industries to meet the user's needs for filtering effects. Our product features a sanitary design that complies with China's pharmaceutical industry "GMP" standards and is suitable for the filtration of liquid or gas. Specification Material: SUS304, SUS316L Filter type: Liquid Length(matched cartridge): 5" ~ 60" Filter specification: Single core or multi-core Application Suitable for liquid filtration in food and beverage processing, pharmaceutical, biotechnology, microelectronics, semiconductor industries, petrochemicals, water treatment industries, etc.
Robusta roasted coffee beans The product has a rich, fragrant, bitter taste just like the name: Robusta, which means strong. The product is suitable for the taste of eveyone. Good taste, strong, sweet, bitter.
The Shaheen Collection utilizes brass as its base material, adorned with a colored patina effect. The design intricacies are etched onto brass sheets prior to the application of the patina effect, resulting in a unique and eye-catching aesthetic.
A collection designed with modern elements and featuring a raw brass aesthetic can bring a sleek and contemporary vibe. The combination of clean lines, minimalist design, and the rugged beauty of raw brass can create a striking visual contrast that's both elegant and edgy.
