Features: 1.One component,neutral curing,non-corrosive to metal, coated glass, marble etc. 2.Prime-less adhesion to most building materials. 3.Remains flexible over a temperature range of 4.Excellent weatherability and high resistance to ultraviolet radiation, heat and humidity, ozone and temperature extremes. 5.Good compatibility with other neutral silicone sealants. 6.The material is supplied as a paste, which cures into extremely tough elastomeric silicone rubber ensuring a durable, flexible, watertight bond upon exposure to atmospheric moisture. Main applications: 1.Sealing in joints. 2.Glazing for door and window. 3.Various interior decoration glass, aluminum, ceramic, tile, wood and metal, etc. 4.Many other uses. Limitations: 1.Can not be used in structural glazing applications. 2.Is not appropriate for all will be leaking oil, plasticizer or solvent surface. 3.Is not suitable for airtight place, because the silicone sealant need absorb air gas in the water cure. 4.Not for frost or wet surface. 5.Is not suitable for the place of continuous immersion or year-round moisture. 6.Surface temperature is not below 0¡æ or above 50 ¡æ. 7.Can not contact with strong acids or bases. 8.Cannot be used on joint which bearing structural strength or places of physical damage. 9.Has performed adhesion and compatibility tests on project substrates and all accompanying accessories. Typical properties: These values are not intended for use in preparing specifications. MethodTest ItemUnitStandard Result GB/T 13477Density g/cm3Specified value 0.1 1.3 GB/T 13477 (ISO 7390) Slump(vertical) mm ¡Ü3 0 GB/T 13477 (ISO 8394) Extrusion rate ml/min 80 380 GB/T 13477(ASTM D 2377) Tack free time h0.9 GB/T 13477 (ISO 7389) Extension recovery8088 GB/T 1347(ASTM C 794) Peel strengthN/mm1.0 1.5 GB: Chinese National Standard ASTM: American Society for Testing and Materials ISO: International Standardization Organization The GB¡± testing method is equivalent or partly equivalent to that in the Installation: 1.Surface preparation: Sealants may not adhere or maintain long-term adhesion to substrates if the surface is not prepared and cleaned properly before sealant application.Using proper materials and cleaning procedures is vital for sealant adhesion. 2.Cleaning materials:clean, fresh solvent; clean, white cloths free of lint or other lint-free wiping materials; primer (when required). 3.Cleaning procedures:Remove all loose material (such as dirt and dust), plus any oil, frost or other contaminants from the substrates to which the sealant will be adhered. Do not use detergent to clean the substrate as residue may be left on the surface. Wet one rag with solvent and wipe the surface with it, then use the second rag to wipe the wet solvent from the surface before it evaporates. Change the cleaning rags frequently, as they become soiled. If cleaned areas are again exposed to rain or contaminants, the surface must be cleaned again. 4.Primers: GP111 general purpose silicone sealant will bond to many clean surfaces without the aid of a primer. For difficult-to-bond substrates, the use of a primer or special surface preparation should be evaluated. Emergent Treatment: Keep out of reach of children. Once it contacts skin or eye by accident, rinse the affected part with water for 15 minutes or turn to doctor for help immediately. Shelf Life: 9 months from the manufacture date stored in cool & dry place below 27 ¡æ. Color: Clear, black, white, gray, other colours as clients¡¯ requirement. Packing: Disposable cartridges£ºnet 200ml, 225ml, 250ml, 280ml, 300ml; 24 pcs / box. Sausages£ºnet 590ml, 500ml; 20 pcs / box. LIMITED WARRANTY INFORMATION ¨C PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer¡¯s tests to ensure that Foshan Shunde Mimdy Sealant Co., Ltd.¡¯s products are safe, effective, and fully satisfactory for the intended end use. FOSHAN SHUNDE MIMDY SEALANT CO., LTD.SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. Foshan shunde mimdy sealant co., ltd. Disclaims liability for any incidental or consequential damages. Disposable cartridges£ºnet 200ml, 225ml, 250ml, 280ml, 300ml; 24 pcs / box. Sausages£ºnet 590ml, 500ml; 20 pcs / box.
Silicone fine chemicals, silicone oil, dimethyl silicone oil, hydrogen silicone oil, vinyl silicone oil, alkyl modified silicone oil, rtv silicone rubber107, hydroxy terminated silicone oil, pdms, dmc, pdms emulsion, silicone oil emulsion, food defoamer, industrial defoamer, antifoaming agent, modified polysiloxane, pet filim adhesive, pi film adhesive, mica tape adhesive, fiberglass adhesive, silicone adhesvie, high temperature resistant silicone resin, shoe material release agent.
Shandong Factory Supply Neutral Weatherproof Silicone Sealant Product Description Material preparation: For successful bonding, glass must be clean of all dust, dirt and oil. The cleaned glass should be wiped dry immediately with a clean, lint free cloth or blown dry with hot oil free air. DO NOT clean glass with soap and water solutions. Soap residue can cat as a release agent and result in adhesion failure. Clean glass should be handled with clean, lint free gloves or equivalent only. Oils from hands and fingers can act a release agents resulting in adhesion failure. Application: 1. Glass must be properly prepared as described. 2. Apply the aquarium sealant to edge surface of the glass to be joined to the non-edge surface. After application of the sealant, the assembled glass components should be tightly placed in a fixture or jig to allow sealant to flow evenly between joined surfaces and to give support during the internal sealing of the aquarium. 3. Selected bead size appropriate for the size of aquarium being constructed. Apply the sealant into the center of the joint formed by the sections of glass. Tool the sealant immediately after application. Any excess sealant should be removed before the sealant is cured by suing a clean cloth. Cured sealant can be trimmed with sharp blade. Allow sealant to cure at least 7-10 days before adding water and fish. This will ensure full cure and will allow the curing agent to totally dissipate. Repair application: The SINOLINK Aquarium Silicone Sealant can be used to repair old or damaged aquariums. 1. Remove all of the damaged sealant, clean area to be repaired with a clean cloth and a suirable solvent. Spply sealant as described above and tool. 2. Check repaired aquarium for leaks before adding fish to tank. Fill aquarium with water and let it for several days and check for any signs or leakage. SINOLINK hot sale white structural mp1 silicone sealant gun prices Product Specification
A lap joint flange is a type of flange that is used in piping systems. It is made up of two parts: a stub end and a lap joint ring flange. The stub end is butt welded to the pipe, and the lap joint ring flange is then slid over the stub end. The flange ring has a flat face that is used to seal against the gasket. Technical Specifications Material: Carbon steel, stainless steel, alloy steel Size: 1/2" to 48" Pressure class: 150 to 2500 Face type: Flat Face Sealing method: Gasket Advantages of Lap Joint Flanges Easy to install and maintain Can be used in a variety of materials and sizes Available in a variety of pressure classes Applications Lap joint flanges are used in a variety of applications, including: Chemical processing Oil and gas Power generation Water treatment
Silicone diffusion pump oil, phenyl methyl silicon oil, silicone diffusion pump oil.
Product Description: A forged hex plug is a type of pipe fitting that is used to seal the end of a threaded pipe. It is made of a solid piece of metal that is forged into a hexagonal shape. The threaded end of the plug is compatible with a variety of pipe thread standards, such as NPT, BSP, and BSPT. Specifications: A. Material: Carbon steel, Alloy steel or Stainless steel, B. Size: 1/2 inch to 4 inches in diameter C. Class: 3000, 6000 Lbs. D. Pressure rating: 100 to 10,000 psi E. Thread: NPT, SAE, or BSPP F. Standard: ASME/ANSI B16.11 G. Finish: Black, galvanized, or other coating Applications: Forged hex plugs are used in a variety of applications, including: A. Oil and gas pipelines B. Chemical plants C. Power plants D. Water treatment plants E. HVAC systems F. Plumbing systems G. General purpose applications Benefits: Forged hex plugs offer a number of benefits, including: a) Strong and durable construction b) Long service life c) Threaded end for compatibility with a variety of pipe thread standards d) Available in a variety of materials and finishes to meet specific requirements
Dear Valued Customers, With more than 6 years of experience and domain expertise, HKN EXIM CO., LTD have gained a reliable position in the competitive market. We are one of the most reliable exporters and suppliers of COCONUT PRODUCTS from Vietnam. Including: COCONUT FIBER, CRUDE COCONUT OIL, COPRA MEAL POWDER, COCONUT BROOM STICK, COCONUT SHELL CHARCOAL. Our CRUDE COCONUT OIL product is manufactured from clean quality materials, processed and personally supervised at every stage of production. So that we do completely supply the product with high quality and competitive price. Now, we give you THE SPECIFICATIONS of CRUDE COCONUT OIL follow as: Moisture: 1% Max Impuriy: 1% Min Iodine value: 22% gI2/100gr Max Acid value: 8 -20 mgKOH/g Free Fat Acid: 6% Max Color: 7 Red, 40 Yellow Crude Coconut Oil (CNO) is known as "basic industrial grade oil". Basically, CNO is an end-product of squeezing out the oil from Copra (dried coconut meat) by the use of expeller press and then refined to eliminate impurities/contaminants. Coconut oil has the attribute of being mild on the skin, thus it is used as moisturizer. It can also be used as cleansing agent and protection against the sun. Therefore, it is often used as raw material for oleochemicals, manufacturing soap, shampoo, and cosmetics products If there is any further information you need, please do not hesitate to contact us. We do hope have chance to cooperate with you in the near future Thanks and best regards, Trang Ta(Ms)-Customer Service Department ------------------------------- HKN EXIM CO., LTD Add: 96 Bui Ta Han Street, An Phu Ward, District 2, HCMC, Vietnam TEL/FAX: 0084 28 6298 8181 Cell/Whatsapp/Viber: 0084 908 256019 MAIL: sales8(at)hknexim(dot)com SKYPE: yen.kimminh
A bull plug is a solid plug used as an isolation device in piping systems, conduits or wellbore tubulars. It is a short part with one threaded end and one rounded closed end. The threaded end is used to connect the bull plug to the pipe or conduit, and the closed end provides a barrier to fluids or gases. The technical specifications of a bull plug will vary depending on the material, size, and thread type. However, some common specifications include: 1. Material: Carbon steel, Alloy steel, Stainless steel or Ductile 2. Size: 1/4 inch to 8 inches 3. Schedule: STD, XS, 160, XXS 4. Thread type: NPT, BSP, BSPT 5. Pressure rating: 100 psi to 20,000 psi Bull plugs are used in a variety of applications, including: A. Blocking off pipelines or conduits B. Isolating sections of piping for maintenance or repair C. Preventing the flow of fluids or gases D. Protecting equipment from contamination They are also used in oil and gas drilling operations to plug off the bottom end of down-hole logging instruments from borehole fluids. Here are some of the advantages of using bull plugs: a. They are simple and easy to install. b. They are available in a variety of sizes and materials to meet the needs of different applications. c. They are relatively inexpensive. d. They can be used to isolate a variety of fluids and gases. Overall, bull plugs are a versatile and effective way to isolate fluids and gases in piping systems, conduits, and wellbore tubulars. They are simple to install and available in a variety of sizes and materials to meet the needs of different applications.
A long radius (long sweep) swivel joint is a type of swivel joint that has a longer radius of curvature than a standard swivel joint. This longer radius allows for smoother rotation and less turbulence, which can improve flow characteristics and reduce wear and tear on the joint. Long radius swivel joints are often used in high pressure applications, such as oil and gas drilling, where smooth rotation and low turbulence are critical. Here are some of the specifications of long radius swivel joints: 1. Sizes: 1-4 inches 2. Working pressure: 3,000-20,000 psi 3. Materials: Steel, stainless steel, alloy steel 4. End connections: Threaded, flanged, union 5. Working Pressure: 25 Mpa - 70 Mpa Here are some of the applications of long radius swivel joints: 1. Oil and gas drilling 2. Fluid handling 3. Mud lines 4. Sour gas 5. Acidizing and fracturing 6. Testing lines 7. Crude oil and gas
A forged square plug is a type of threaded fitting that is used to block the end of a pipe or tube It is made of a solid piece of metal that is forged into a square shape with a threaded bore The threaded bore allows the plug to be screwed into the end of the pipe or tube Technical Specifications The technical specifications of a forged square plug vary depending on the material used the size and the pressure rating However some common specifications include Specifications 1 Material Steel stainless steel or other metal 2 Standard ASMEANSI B1611 3 Size 12 inch to 4 inches in diameter 4 Pressure rating 100 to 10000 psi 5 Thread NPT SAE or BSPP 6 Finish Black galvanized or other coating Applications Forged square plugs are used in a variety of applications including Oil and gas pipelines Chemical processing plants Water treatment facilities Power plants HVAC systems Marine applications Advantages The advantages of using a forged square plug include Strong and durable construction Threaded bore for easy installation Wide range of materials and sizes available Can be used in highpressure applications Overall a forged square plug is a versatile and reliable type of threaded fitting that can be used in a variety of applications It is a good choice for applications where strength durability and a wide range of materials and sizes are required
A forged coupling is a type of pipe fitting that is made by forging, a process that uses heat and pressure to shape metal. Forged couplings are typically made of steel, but they can also be made of other metals such as stainless steel, alloy steel, and copper. Forged couplings are stronger and more durable than other types of pipe fittings, such as threaded couplings. They are also less likely to leak. Forged couplings are used in a variety of applications, including water, gas, and oil pipelines, as well as in industrial and construction applications. Here are some of the technical specifications of forged couplings: Material: Steel, stainless steel, alloy steel, copper Class: 2000, 3000, 6000, 9000 Size: 1/8 to 4" End type: Socket weld, threaded, flanged Size: Typically available in sizes from 1/2 inch to 12 inches
A forged hex nipple full size is a type of threaded fastener that is made from a single piece of metal that has been forged into shape. The nipple has a hexagonal head on one end and a threaded shank on the other end. The nipple is used to connect two pipes or other components together. Technical specification: The following are the technical specifications of a forged hex nipple full size: 1. Size: 1/8 Inch to 2 Inch 2. Material: Carbon steel, Alloy Steel, Stainless steel, Duplex 3. Finish: The nipple is available in a variety of finishes, including hot-dipped galvanized, black oxide, and electroplated nickel. 4. Strength: The nipple is strong and durable, and can withstand a variety of stresses. 5. Thread: NPT, BSP, BSPT Applications: Forged hex nipples full size are used in a variety of applications, including: 1. Plumbing 2. HVAC 3. Machinery 4. Construction 5. Oil and gas 6. Marine Advantages: The advantages of using forged hex nipples full size include: 1. Strength and durability 2. Wide range of sizes and materials available 3. Variety of finishes available 4. Easy to install 5. Long service life Overall, forged hex nipples full size are a versatile and reliable type of threaded fastener that is used in a variety of applications. They are strong, durable, and easy to install, making them a good choice for many projects.
A forged hex nipple reducing size is a type of threaded pipe fitting that is made by forging, a process that involves shaping metal by hammering or pressing it. It has a hexagonal head on one end and a threaded bore on the other end. The bore is smaller than the outside diameter of the nipple, which allows it to be used to reduce the size of a pipe. Technical Specifications: The following are the technical specifications of a forged hex nipple reducing size: 1. Size: 1/8 Inch to 2 Inch 2. Class: 3,000#, 6,000# Lbs. 3. Material: Carbon steel, Alloy Steel, Stainless steel, Duplex 4. Finish: The nipple is available in a variety of finishes, including hot-dipped galvanized, black oxide, and electroplated nickel. 5. Strength: The nipple is strong and durable, and can withstand a variety of stresses. 6. Thread: NPT, BSP, BSPT Applications: Forged hex nipple reducing sizes are used in a variety of applications, including: 1. Plumbing 2. HVAC (heating, ventilation, and air conditioning) 3. Machinery 4. Automotive 5. Oil and gas Advantages: The following are some of the advantages of using forged hex nipple reducing sizes: 1. They are strong and durable. 2. They can withstand high pressure and temperatures. 3. They are corrosion resistant. 4. They are easy to install. Overall, forged hex nipple reducing sizes are a versatile and reliable type of pipe fitting that can be used in a variety of applications. They are strong, durable, and corrosion resistant, making them a good choice for demanding environments. However, they are also more expensive than other types of pipe fittings and may not be available in all sizes.
A threaded flange is a type of flange that uses a screw thread to connect the flange to a pipe. A male thread is cut onto a pipe end whilst a female thread is cut into the bore of the flange; the male threaded pipe is then screwed into the female threaded flange. Threaded flanges are available in a variety of sizes and pressure ratings, and are typically made from Various Materials. Technical Specifications 1. Materials: Carbon steel, stainless steel, alloy steel, 2. Size: �½ inch to 24 inches 3. Classes: 150, 300, 400, 600, 900, 1500, 2500 4. Thread type: NPT, BSP, BSPT, BSPP 5. Face type: Flat, Raised and Ring Joint 6. Dimensions: ANSI B16.5, ASME B16.47, Advantages of Threaded Flanges: A. Easy to install and maintain B. No welding required C. Suitable for a variety of applications D. Available in a variety of sizes and pressure ratings Applications: Threaded flanges are used in a variety of applications, including: a. Water and wastewater systems b. Oil and gas pipelines c. Chemical processing plants d. HVAC systems e. Fire protection systems
We are ready and able to offer you Rapeseed oil On CIF at a price repined 1300$/mt cif for crude 1250$ prosedure : 1) Buyer issue a ICPO signed by the End Buyer. 2) Seller issued a Spa + invoice to the Buyer. Buyer shall sign the spa invoice to accept the terms offered. 3) Seller provides draft contract for both parties amendable and signing via electronic medium is acceptable. Both parties lodged copy of signed contract to their own bank respectively. 4) After the agreement is effective, the seller shall provide the Performa Invoice and the CIS/KYC of the sellers specified beneficiary company in which the Seller assigned to receive the Documentary Latter of credit. Buyers bank shall issue an Irrevocable, Non-Transferable and Divisible Documentary Latter of credit for the trial order face value or the monthly order face value respectively within 5 banking days to the sellers assigned beneficiary bank after receiving Performa Invoice and the CIS/KYC from the Seller. The amount of the L/C of the trial order value is (calculated as. The amount of the L/C of the monthly order value bank shall provide full set of proof of product (POP) documents. 5) Buyer and Seller both appointed International Surveyor Company (SGS) shall conduct an assay of the cargo at the Loading Port. The inspection fee shall be paid by the seller. 6) Seller provide full set of Proof of Product (POP) documents stated as below a. Certificated of Origin; b. Product inspection report; c. Warehouse Report (Warehouse Receipt); d. Export permit; e. Photographs and a video clip of the Oils f. All other documents deemed necessary by both Parties. 7) The seller provides part or all of the marine BILL of lading within 25 calendar days after the seller checks the validity of the letter of credit issued by the buyer. 8) The seller shall arrange and pay customs duties at the place of shipment. Looking forward to read from you soon Thank you
Function of Avocado oil 1.Avocado Oil is an all-natural, nutrient-rich vegetable oil that contains collagen-supporting amino acids and proteins, as well as vitamins A, D and E. Heavy in texture. 2.Avocado Oil increases epidermal elasticity, while thoroughly moisturizing and softening stubborn, dry or cracked skin. When used as a massage oil, it's soft, soothing and leaves no greasy residue. 3.Efficacy on skin: Avocado oil can removes impurities and dead skin cells. 4.Avocado can reduces wrinkles and age spots. 5.Avocado oil protects the hair from heat and other chemicals, and gets rid of split ends and frizzy hair. 6.Avocado oil can also use as hair treatment enhances hair growth and thickens hair. Adds shine to dull, dry hair. 7.Avocado oil Is an excellent beard oil for men.
United Fuel Supply’s palm oil production facility in Malaysia is currently under construction and is expected to be fully operational by the end of February 2015. There we will produce, bottle, and ship our own RBD Palm Oils. Oils are available in 1, 3, 5, 25, and 30 liter containers. We produce: 1. RBD palm oil (PCO) 2. RBD palm olein (CP8) 3. RBD palm stearin 4. RBD palm kernel oil United Fuel Supply’s oleochemicals are derived from virgin vegetable feedstock, recycled oils, or fats. Available from crude to tech grades, United Fuel Supply’s oleochemicals are used across multiple industries in many different applications. Palm kernel expeller is mainly used as a feed additive for livestock because of the high levels of protein, fiber, and palmitic acid in remnant oil and shell. PKE is the remnant shell, oil, and other biomass left over from crushing and expelling oil from a palm kernel.
High Quality Unrefined Corn Oil. The contract with the end seller. Quality control by a Swiss company. Product : Non Gmo Origin: Produced from Ukrainian raw materials at a plant in Malaysia, meeting the Specifications and confirmed by certificates, including SGS Crude Degummed Corn Oil Fatty Acids (f.f.a):2,5% Specific Gravity (25 C): 0.915-0.922 Moisture: 0,5% Phosphorus:ppm
Primavera Silk Protein Argan Oil 1l - Flornã?a Professional : Blend of amino acids that make up the molecular structure of the main hair protein, keratin, associated with Argan oil and extract of acai, which bring emollience, resistance and shine to the hair. In addition to a vegetable protein with total synergy with the keratin of the hair, capable of coupling to the most damaged parts of the hair, restoring and strengthening the hair. - Tannic Acid Technology: A powerful asset extracted from the tannin of the argan oil , capable of maintaining a new smooth shape in the hair by thermo-mechanical action. single step Easy to Apply: 1. Wash: Wash the hair with a clarifying shampoo. 2. Dry: Dry using the dryer. 3. APPLY: Divide into quadrants. Apply primavera silk protien evenly over the entire length of the strands, strand by strand, sliding and massaging them with the fingers and the comb towards the ends. 4. REST: Leave to act for 60 minutes, rinse. 5. TO BRUSH: For an extreme smooth effect, brush the hair and pass the board through very thin strands 10 - 12 times. 6. RESULT: Result: straight, strengthened and treated hair.
Dear Sirs and Madams, Please find here below FOB Merey-16 Crude oil offers with 3 different options: 1-) FOB 2-) CNF 3-) Loaded ready Vessel OFFER 1 FOB: Goods : Merey-16 Crude Oil Quantity : 2.000.000 +/- %10 first shipment than after each month 2Million to 6Million bbls is ok in buyer option Quality : Merey-16 FOB Price : BRENT 11 Gross / 10USD NET TO BUYER OFFER 2 CIF: Goods : Merey-16 Crude Oil Quantity : 2.000.000 +/- %10 first shipment than after each month 2Million to 6Million bbls is ok in buyer option Quality : Merey 16 CIF Price : BRENT 9USD Gross / 8USD NET TO BUYER OFFER 3 READY LOADED VESSEL: THIS IS ONE TIME OFFER Goods : Merey-16 Crude Oil Quantity : 1.970.000BBLS (loaded at vessel and ready for move Buyer destination) Quality : API 17.3 / 2.52 Sulphur (its actual quality which oil at vessel board) Price : BRENT 6 Gross / 5USD NET TO BUYER Sales Procedure FOB and CIF (Not open for change-Please do not ask different things, if you not have any buyer for above offers and given terms just ignore this email, for name of save time) 1-) Buyer send LOI (end buyer not broker) 2-) After we will verify buyer we send FCO 3-) Buyer bank send Confirmation Swift message for LC funds is ready) 4-) We send SPA (sales contract) 5-) Buyer bank send Letter of Credit at sight basis 6-) We will send Proof of product to buyer 7-) If deal FOB buyer must arrange vessel and give us Q88 of tanker in 3business days after receiving L/C If deal CIF we will load vessel on agreed time at SPA contract Sales Procedure for Ready Vessel (Not open for change-Please do not ask different things, if you not have any buyer for above offers and given terms just ignore this email, for name of save time) 1-) Buyer send LOI (end buyer not broker) 2-) After we will verify buyer we send FCO 3-) Buyer bank send â??Confirmation Swift message for LC funds is ready) 4-) We send SPA (sales contract) 5-) Buyer bank send Letter of Credit at sight basis 6-) We will send Proof of LOADING VESSEL DOCUMENTS (BL copy, certificate of origin, Vessel name, Ullage report,etc.) 7-) When vessel deliver buyer port LC return cash NO ADVANCE PAYMENT HERE ! REMARKS: We accept following currency LC: EURO, TURKISH LIRA, CHINESE YUAN, (NO USD CURRENCY BCZ OF MEREY-16 IS VENEZUELA ORIGIN CRUDE OIL AS YOU KNOW) So if you have buyer pls send their LOI as first STEP, for starting process, without LOI we are not interest with any requests.
