Product Introduction Metal porous titanium plates are primarily used in standard PEM electrolyzer single cells and stacks as the flow field or diffuser material, particularly on the oxygen (anode) side. . Electrolyzer hardwares cannot use carbon-based gas diffusion layers (GDLs) at the anode because the carbon will immediately oxidize to CO2 (if the medium is acidic) or carbonate ions (if the medium is basic) during the reaction. Porous titanium plates are an excellent option for a diffusion medium in various applications, including electrolyzers and fuel cells. TOPTITECH�´s porous metal gas diffusion layers are the top choice for achieving high performance in these applications. The uniform porosity, strength, and corrosion resistance outperform other diffusion layer productsTOPTITECH substrates are available in a variety of alloys to support a full range of fuel cell operating temperatures, and can be coated with surface treatments or catalyst layers to enchance performance. In an electrolyzer, why not utilize a carbon-based Gas Diffusion Layer? Using a carbon-based gas diffusion layer (GDL) in an electrolyzer can pose several challenges. The presence of oxygen ions and voltage on the anode side of the electrolyzer can cause the carbon in the GDL to be oxidized, resulting in the generation of CO2 gas. While this can initially lead to a lower electrolysis voltage, the consumption of the carbon GDL is a short-lived phenomenon. As a result, the stack compression decreases, leading to higher resistance and lower performance. Therefore, it is not advisable to use a carbon-based GDL in an electrolyzer. Parameters Place of origin: Baoji, China Brand: TOPTITECH Filtration precision:0.2um-100um Material: titanium Working temperature 300 Length: 30-1000mm(More than 1000mm can be welded) Thickness: 0.5mm
Pure titanium aeration head is a kind of advanced sewage treatment equipment parts made by international advanced technology. The main part of the pure titanium aeration head is made of industrial pure titanium powder as the main raw material, and molds of different styles and sizes are customized according to customer needs. After the titanium powder is pressurized and formed, it is sintered in high temperature vacuum, and finally the connection interface is put into use. The pure titanium aeration head produced by TopTiTech has uniform structure, small aeration bubble diameter, high aeration efficiency, convenient installation, low energy consumption, and corrosion resistance. It is widely used in sewage treatment, industrial organic wastewater treatment, and oxidation pool equipment. and biofilters, etc. Specification 1. spherical aerator head Bottom diameter: 150mm-200mm 2. Flat aerator head Diameter: 100mm-300mm 3. Tube aerator head Diameter: 14mm-80mm Length: 10mm-1000mm What are the features? 1. The aeration aperture is fine and uniform, and the efficiency is high; 2. The air bubbles diffuse evenly, and there will be no clogging of pores; 3. High temperature resistance and corrosion resistance; 4. Fast oxygenation speed; 5. Washable and reusable; 6. Customizable. How does titanium aeration head work? Aeration is mainly used in sewage biological treatment In the sewage treatment tank, the porous pure titanium aeration head can greatly increase the oxygen content in the sewage, thereby satisfying the activity of microorganisms that adsorb sewage impurities and increasing the sewage treatment rate. Whether it is the treatment and purification of urban sewage, industrial sewage, etc., it is inseparable from the use of pure titanium aerators.
Pure titanium aeration head is a kind of advanced sewage treatment equipment parts made by international advanced technology. The main part of the pure titanium aeration head is made of industrial pure titanium powder as the main raw material, and molds of different styles and sizes are customized according to customer needs. After the titanium powder is pressurized and formed, it is sintered in high temperature vacuum, and finally the connection interface is put into use. The pure titanium aeration head produced by TopTiTech has uniform structure, small aeration bubble diameter, high aeration efficiency, convenient installation, low energy consumption, and corrosion resistance. It is widely used in sewage treatment, industrial organic wastewater treatment, and oxidation pool equipment. and biofilters, etc. Specification 1. spherical aerator head Bottom diameter: 150mm-200mm 2. Flat aerator head Diameter: 100mm-300mm 3. Tube aerator head Diameter: 14mm-80mm Length: 10mm-1000mm What are the features? 1. The aeration aperture is fine and uniform, and the efficiency is high; 2. The air bubbles diffuse evenly, and there will be no clogging of pores; 3. High temperature resistance and corrosion resistance; 4. Fast oxygenation speed; 5. Washable and reusable; 6. Customizable. How does titanium aeration head work? Aeration is mainly used in sewage biological treatment In the sewage treatment tank, the porous pure titanium aeration head can greatly increase the oxygen content in the sewage, thereby satisfying the activity of microorganisms that adsorb sewage impurities and increasing the sewage treatment rate. Whether it is the treatment and purification of urban sewage, industrial sewage, etc., it is inseparable from the use of pure titanium aerators.
Pure titanium aeration head is a kind of advanced sewage treatment equipment parts made by international advanced technology. The main part of the pure titanium aeration head is made of industrial pure titanium powder as the main raw material, and molds of different styles and sizes are customized according to customer needs. After the titanium powder is pressurized and formed, it is sintered in high temperature vacuum, and finally the connection interface is put into use. The pure titanium aeration head produced by TopTiTech has uniform structure, small aeration bubble diameter, high aeration efficiency, convenient installation, low energy consumption, and corrosion resistance. It is widely used in sewage treatment, industrial organic wastewater treatment, and oxidation pool equipment. and biofilters, etc. Specification 1. spherical aerator head Bottom diameter: 150mm-200mm 2. Flat aerator head Diameter: 100mm-300mm 3. Tube aerator head Diameter: 14mm-80mm Length: 10mm-1000mm What are the features? 1. The aeration aperture is fine and uniform, and the efficiency is high; 2. The air bubbles diffuse evenly, and there will be no clogging of pores; 3. High temperature resistance and corrosion resistance; 4. Fast oxygenation speed; 5. Washable and reusable; 6. Customizable. How does titanium aeration head work? Aeration is mainly used in sewage biological treatment In the sewage treatment tank, the porous pure titanium aeration head can greatly increase the oxygen content in the sewage, thereby satisfying the activity of microorganisms that adsorb sewage impurities and increasing the sewage treatment rate. Whether it is the treatment and purification of urban sewage, industrial sewage, etc., it is inseparable from the use of pure titanium aerators.
Enterprise advantage: The company has advanced equipment, including high-precision machining equipment such as five-axis and four-axis CNC machining centers, three-axis machining centers, coordinate measuring machines, etc. We cut and complement products according to customers' drawings and strictly control the quality of each production process to ensure that all delivered products are 100% consistent with the drawings and are high-quality and highly precise. In order to assist in the development of customized products, the company has established a team responsible for supervising, communication, and continuous optimization to improve product performance and quality. We have more than 20 technical, technological and operational employees who have been engaged in the production and processing of titanium industry for 20 years. We can provide customized solutions and accept new product development according to the drawings, sample and requirements provided by customers. Titanium machining parts, with titanium standard parts grades ofï¼? TA1, TA2, TC4, GR1, GR2, GR5, GR9, GR23 etc. of �±, �², �± + �² titanium and titanium alloy materials. Standard: DIN, BG, ISO, BSW, UNC titanium and titanium alloy non-standard fasteners, machining according to the drawings. Titanium bike,Titanium bicycle,accessories Frame, front fork, rear fork, grip, handle, pedal, flywheel, transmission Applicable scenes: chemical equipment, medical parts, home appliance parts, photographic equipment, automobile and motorcycle parts, electronics factory, powder metallurgy, photoelectric technology, home accessories, food machinery. Delivery time: 7-30 days (or as negotiated by both sides for highly customized products) Surface treatment: galvanization, chrome plating, black oxidization, anodic oxidation, sandblasting, painting treatment according to different materials and different requirements Minimum order quantity: 10 pieces Payment method: L/C, D/P, T/T Mode of shipment: air, sea, express, etc.
Titanium felt is a soft material made of pure titanium fibers, which can be used in electrolytic cells as an electrode. The process is that the titanium wire is made into micron-scale fibers through a special process, and the titanium fibers are laid and sintered to make porous materials. Its unique three-dimensional network fibers and fully connected pore structure make it have a series of special functions. In the application of hydrogen production, under the condition of normal pressure of 60 , titanium felt has the best electrolytic performance, the most suitable pore size, the best air permeability and porosity. The test data show that titanium felt is better than titanium plate and carbon paper.
Titanium felt, a diffusion layer material, provides electrons between the catalyst layer and the bipolar plate or the current distributor on the anode side. Due to its three-dimensional network porous structure, high porosity, high corrosion resistance and other characteristics, titanium felt has become one of the best materials of diffusion layer in fuel cell and hydrogen production by water electrolysis. Parameters: Material: Titanium Size:1500*1200mm Thickness:0.2mm, 0.25mm, 0.40mm, 0.60mm, 0.80mm, 1.00mm, 2.0mm. Porosity:60% - 75% â?» Porosity and Size can be customized. Technological Process Pure titanium (special process)-titanium fiber (laying, sintering)-titanium fiber felt (with three-dimensional network porous structure)- Titanium felt for LGDL Features: 1. Three-dimensional grid porous structureï¼? 2. Strong corrosion resistanceï¼? 3. Optimal electrolysis performanceï¼? 4. High porosity and current densityï¼? 5. Uniform pore size distribution. Applicantion 1. Liquid/gas diffusion layer; 2. Hydrogen absorber; 3. Hydrogen-rich water dispenser; 4. Diffusion layer of hydrogen cell stack; 5. PEM hydrogen production by water electrolysis.
Titanium felt, a diffusion layer material, provides electrons between the catalyst layer and the bipolar plate or the current distributor on the anode side. Due to its three-dimensional network porous structure, high porosity, high corrosion resistance and other characteristics, titanium felt has become one of the best materials of diffusion layer in fuel cell and hydrogen production by water electrolysis. Parameters: Material: Titanium Size:1500*1200mm Thickness:0.2mm, 0.25mm, 0.40mm, 0.60mm, 0.80mm, 1.00mm, 2.0mm. Porosity:60% - 75% â?» Porosity and Size can be customized. Technological Process Pure titanium (special process)-titanium fiber (laying, sintering)-titanium fiber felt (with three-dimensional network porous structure)- Titanium felt for LGDL Features: 1. Three-dimensional grid porous structureï¼? 2. Strong corrosion resistanceï¼? 3. Optimal electrolysis performanceï¼? 4. High porosity and current densityï¼? 5. Uniform pore size distribution. Applicantion 1. Liquid/gas diffusion layer; 2. Hydrogen absorber; 3. Hydrogen-rich water dispenser; 4. Diffusion layer of hydrogen cell stack; 5. PEM hydrogen production by water electrolysis.
Titanium felt, a diffusion layer material, provides electrons between the catalyst layer and the bipolar plate or the current distributor on the anode side. Due to its three-dimensional network porous structure, high porosity, high corrosion resistance and other characteristics, titanium felt has become one of the best materials of diffusion layer in fuel cell and hydrogen production by water electrolysis. Parameters: Material: Titanium Size:1500*1200mm Thickness:0.2mm, 0.25mm, 0.40mm, 0.60mm, 0.80mm, 1.00mm, 2.0mm. Porosity:60% - 75% â?» Porosity and Size can be customized. Technological Process Pure titanium (special process)-titanium fiber (laying, sintering)-titanium fiber felt (with three-dimensional network porous structure)- Titanium felt for LGDL Features: 1. Three-dimensional grid porous structureï¼? 2. Strong corrosion resistanceï¼? 3. Optimal electrolysis performanceï¼? 4. High porosity and current densityï¼? 5. Uniform pore size distribution. Applicantion 1. Liquid/gas diffusion layer; 2. Hydrogen absorber; 3. Hydrogen-rich water dispenser; 4. Diffusion layer of hydrogen cell stack; 5. PEM hydrogen production by water electrolysis.
Titanium felt, a diffusion layer material, provides electrons between the catalyst layer and the bipolar plate or the current distributor on the anode side. Due to its three-dimensional network porous structure, high porosity, high corrosion resistance and other characteristics, titanium felt has become one of the best materials of diffusion layer in fuel cell and hydrogen production by water electrolysis. Parameters: Material: Titanium Size:1500*1200mm Thickness:0.2mm, 0.25mm, 0.40mm, 0.60mm, 0.80mm, 1.00mm, 2.0mm. Porosity:60% - 75% Porosity and Size can be customized. Technological Process Pure titanium (special process)-titanium fiber (laying, sintering)-titanium fiber felt (with three-dimensional network porous structure)- Titanium felt for LGDL Features: 1. Three-dimensional grid porous structure 2. Strong corrosion resistance 3. Optimal electrolysis performance 4. High porosity and current density 5. Uniform pore size distribution. Application 1. Liquid/gas diffusion layer; 2. Hydrogen absorber; 3. Hydrogen-rich water dispenser; 4. Diffusion layer of hydrogen cell stack; 5. PEM hydrogen production by water electrolysis.
Titanium felt, a diffusion layer material, provides electrons between the catalyst layer and the bipolar plate or the current distributor on the anode side. Due to its three-dimensional network porous structure, high porosity, high corrosion resistance and other characteristics, titanium felt has become one of the best materials of diffusion layer in fuel cell and hydrogen production by water electrolysis. Parameters: Material: Titanium Size:1500*1200mm Thickness:0.2mm, 0.25mm, 0.40mm, 0.60mm, 0.80mm, 1.00mm, 2.0mm. Porosity:60% - 75% â?» Porosity and Size can be customized. Technological Process Pure titanium (special process)-titanium fiber (laying, sintering)-titanium fiber felt (with three-dimensional network porous structure)- Titanium felt for LGDL Features: 1. Three-dimensional grid porous structureï¼? 2. Strong corrosion resistanceï¼? 3. Optimal electrolysis performanceï¼? 4. High porosity and current densityï¼? 5. Uniform pore size distribution. Applicantion 1. Liquid/gas diffusion layer; 2. Hydrogen absorber; 3. Hydrogen-rich water dispenser; 4. Diffusion layer of hydrogen cell stack; 5. PEM hydrogen production by water electrolysis.
Titanium coiles are best offered and exchanged by Preston Pipes and Alloys. They are the remarkable alliance giving the sheets, plates, and turns from the titanium grade 5 blends. It is the best blend in the class of the tempered steel as this is considered as the most premium quality harsh material. The mix utilized genuinely working out as expected of these plates is having fine structure and Provides fine zenith in the wake of machining. The plates as such are giving the Hard-wearing limit, despite how these plates are much lightweight. These plates, sheets, and circles are having Soaring moldable quality as they can be extended and compacted up to much degree with no breakage or distortion. This thing is having higher quality and hardness and subsequently addresses progressively undeniable durability. They are set up in the fortified condition and as necessities be accomplish progressively recognizable adaptability at high temperature and weight. This composite is Ductile in nature and accordingly the plates, sheets, and winds can be shown in various estimations and shapes. We at Preston Pipes and Alloys are additionally appearing custom structure things for the utilization of the client's needs. This amalgam is in like way having Good deficiency and break confinement and the plates and sheets encompassed don't confront any part and setting, this is likewise by prudence of turns and different things. The Preston Pipes and Alloys are passing on the things with fine quality and logically basic capacity. We are in this business of progress for a long time and are giving our clients the delight in utilizing the finely assembled mechanical thing with much dependence and trust. We are giving the Titanium Alloy Gr 5 Sheets, Plates, Coils at truly sensible costs which are completely palatable to our clients. You can control us through our site or the contact support. We give the 24x7 contact sponsorship to the request of our clients.
TOPTITECH's 0.25mm Titanium Sheet enables seamless and efficient transport of reactants within the electrolysis cell. By acting as a PTL, it facilitates the smooth flow of water to the catalyst layers, ensuring effective electron conduction and removing generated oxygen gas. This promotes enhanced utilization of the catalyst layers, resulting in improved overall electrolysis efficiency and hydrogen production. Specifications Material: GR1 titanium powder Pore size/Filtration grade: 20um Size:100x100mm Thickness: 0.25mm Porosity: 40%-50% Technique: Sintering Features Enhanced Catalyst Layer Utilization Excellent Transport Properties Precise Thickness and Durability Seamless Integration and Compatibility Sustainable and Eco-Friendly The role of 0.25mm Titanium Sheet as PTL The 0.25mm Titanium Sheet plays a critical role as a Porous Transport Layer (PTL) within water electrolyzers, unlocking enhanced performance and efficiency in the electrolysis process. Efficient Reactant Transport Enhanced Gas Removal Effective Electron Conduction Structural Support and Stability Scalability and Compatibility
Titanium sponge is a pure, coarse powder or granular form of titanium metal. It is used as a raw material for producing refined titanium. Further refining the titanium sponge allows the creation of titanium ingots, titanium bars, and other materials. Grinding titanium sponge produces titanium powder, which is commonly used for coating and machining parts of machinery and instruments. Titanium sponge is a metallic material with numerous tiny pores, known for its delicacy and high strength-to-weight ratio. It exhibits excellent heat resistance, corrosion resistance, and low electrical conductivity. Titanium sponge powder serves as an intermediate product for manufacturing various titanium products, such as sheets, rods, and plates. It finds wide applications in industries such as aerospace, naval, chemical, petroleum, and medical. Distinctive Features: High Strength-to-Weight Ratio: Titanium sponge is highly suitable for aerospace and military applications due to its excellent strength-to-weight ratio, making weight reduction crucial. Excellent Corrosion Resistance: Titanium sponge exhibits strong corrosion resistance even in harsh environments. Biocompatibility: Titanium sponge possesses biocompatibility, making it an ideal material for medical implants and devices. Heat Resistance: With a high melting point and excellent heat resistance, titanium sponge is well-suited for high-temperature applications. Applications: Defense and Aerospace: Due to its outstanding corrosion resistance and high strength-to-weight ratio, titanium sponge is widely used in defense and aerospace industries. Chemical and Petrochemical: Titanium sponge finds applications in chemical and petrochemical industries due to its exceptional corrosion resistance. It is utilized in heat exchangers, pressure vessels, and reactors. Medical: Titanium sponge's biocompatibility makes it highly suitable for medical implants and devices, such as dental implants, joint replacements, and pacemakers. Sports Equipment: Titanium sponge is employed in sports equipment, including golf club shafts, tennis rackets, and bicycle frames, due to its high strength-to-weight ratio. Jewelry: Titanium sponge is used in jewelry production due to its unique properties, such as lightweight and corrosion resistance.
Quick Details Grade GR1,GR2,GR5 Standard GB/T 3622, ASTM B265, ASME SB265 Thickness 0.007mm - 0.3 mm Condition Annealed or unannealed Shape Coil or sheet Packaging cardboard or wooden boxes producing area baoji,china Email sxzctai@gmail.com Product Details We are committed to providing the highest quality titanium foil products. ZCT is committed to providing customers with personalized material solutions to meet their needs and manufacturing processes. Titanium foil specification View Files Titanium Foil Properties Corrosion resistance low elastic modulus good heat transfer performance Suction performance High and low temperature resistance Non-magnetic, non-toxic Titanium foil detection We visually inspect the surface quality to make sure there are no blemishes, black spots and any other defects. We also conduct chemical composition testing to ensure all chemical compositions meet the requirements. Mechanical performance testing to ensure that all titanium foils have satisfactory mechanical performance before leaving the factory. Quality assurance of titanium foil We perform these tasks to ensure quality in accordance with globally recognized standards such as ASTM, AMS, ASME, JIS, MIL, etc. Chemical composition, mechanical properties, to ensure that there are no defects inside the product. Advanced equipment and skilled production team can produce ultra-thin titanium foil as thin as 0.01mm. We focus on product development and production problem solving for critical applications, ensuring availability, consistency and quality. We are also able to supply annealed or tempered titanium foils to precise required specifications.
The microporous pure titanium aeration head uses industrial pure titanium powder (purity 99.6%) as the main raw material and is sintered under high temperature and high vacuum. Its structure is uniform, the micropore diameter is 0.2-100�¼m, the porosity is 35%~50%, the filtration resistance is small, the separation and purification efficiency is high, and the mechanical properties are good. Products Parameters Tubular type: Diameter: 30mm, 50mm, 60mm Length: 10~1000mm, other specifications can also be customized The connection can be internal or external threads, and can also be customized according to customer needs. Spherical type: Diameter: 30mm, 50mm, 60mm, 100, 150mm, 180mm The connection can be internal or external thread, and can also be customized according to customer needs. Flat plate type: Diameter: 125, 180mm, other specifications can also be customized The connection can be internal or external threads, and can also be customized according to customer needs. Products Features The bubbles spread evenly, the aeration bubble diameter is small, and the gas-liquid interface area is large No hole clogging, good chemical stability, acid, and alkali corrosion resistance Robust construction, well-sealed, resistant to damage, ideal for demanding operational environments It has a long service life, is simple to clean, and can be regenerated online Products Applications The scope of application includes urban sewage, chemical industry, petrochemical industry, bioengineering, pharmaceutical industry, food industry, new expansion and expansion of large water-use plants, and renovation of old aeration tanks, etc.
Titanium Expanded Mesh 3*6mm Hole 1mm Thickness for Fuel Cell, this product is specially designed for fuel cells. Made of high-quality titanium material, this stretch mesh has excellent corrosion resistance and excellent mechanical properties, providing stable and reliable performance for fuel cell systems. Parameter Material: GR1 titanium Size: 200x200mm Pore size: 3x6mm, 2x3mm or customized Thickness: 1mm, 0.5mm or customized Technique: expanding Features 1. This titanium stretch mesh is made of high-quality titanium material, which has excellent corrosion resistance and excellent mechanical properties. The titanium material itself has the characteristics of low density and high strength, allowing the stretch mesh to maintain stability and durability in long-term use. 2. The moderate hole diameter of 3*6mm can ensure the free flow of gas and liquid in the fuel cell system. This appropriate mesh size helps achieve good gas diffusion and fluid distribution, thereby improving fuel cell efficiency and performance. 3.The thickness of 3.1mm provides this stretch mesh with sufficient strength and structural stability. It is able to withstand the stress and pressure in the fuel cell system while maintaining shape stability and not easily deformed or damaged. This titanium stretch mesh is precision manufactured with an excellent surface finish and meticulous detail. It exhibits high-quality appearance and workmanship while also meeting fuel cell system requirements for material purity and cleanliness. The Application in the Fuel Cell 1.Electrode Support Material: The titanium expanded mesh serves as a reliable support material for fuel cell electrodes, ensuring uniform distribution and strong contact. Its mesh structure enables efficient gas diffusion and electrolyte transport. 2.Flow Field Plate: The mesh is utilized in the flow field plates of fuel cells, facilitating the flow and distribution of fuel gas and oxygen. With its carefully designed hole size and thickness, it promotes effective gas flow and provides structural stability. 3.Catalyst Layer Support: The mesh can be employed as a support material for the oxygen reduction reaction (ORR) catalyst layer. Its high surface area and excellent conductivity enhance catalyst adhesion and electron transfer, improving the efficiency of the ORR.
Sintered titanium products find application as filters in various industries, including pharmaceuticals, water treatment, food processing, biological engineering, chemicals, petrochemicals, metallurgy, and gas purification. Porous titanium sheets are particularly utilized as Gas Diffusion Layers in next-generation fuel cells, specifically Proton Exchange Membrane Fuel Cells (PEMFC). Parameters Material: Pure titanium powder Filtration precision: 0.2um Sheet dimension range: Thickness: 0.5-3mm Width:
Titanium pipes for exhaust and downpipe applications are highly sought after due to their excellent properties, including high strength, lightweight design, corrosion resistance, and heat endurance. Specifications: Material: Gr1 Purity: >99.6% Outer Diameter (OD): 8mm Wall Thickness: 1.2mm Leg Length: 400mm (Customizable) Bend Angle: 90�° Surface Finish: Polished Features Superior Strength and Durability: Titanium pipes exhibit a remarkable strength-to-weight ratio, making them incredibly strong and durable. This property allows them to withstand high-pressure conditions, extreme temperatures, and mechanical stresses associated with exhaust systems, ensuring long-lasting performance. Lightweight Design: Titanium is renowned for its exceptional lightweight nature, which contributes to reduced overall weight in vehicles and aircraft. The lighter weight of titanium pipes for exhaust and downpipe applications not only improves fuel efficiency but also enhances the handling and performance of vehicles. Corrosion Resistance: Titanium is highly resistant to corrosion, making it an ideal choice for exhaust and downpipe systems exposed to harsh environments, such as corrosive gases, high temperatures, and moisture. This corrosion resistance ensures the longevity and reliability of the pipes, even in challenging conditions. Improved Engine Performance: Titanium pipes offer excellent exhaust gas flow characteristics, reducing backpressure and improving engine performance. The enhanced flow efficiency contributes to increased horsepower, torque, and overall engine responsiveness, providing a thrilling driving experience. Aesthetic Appeal: In addition to their exceptional performance, titanium pipes often feature a polished or brushed surface finish, adding an aesthetic appeal to the exhaust and downpipe systems. The sleek and sophisticated appearance of titanium pipes enhances the overall visual appeal of vehicles and aircraft. Applications: Automotive Industry Downpipes Motorsports Performance Upgrades Aerospace Industry Jet Engines Energy Sector Power Generation Marine Industry Marine Exhaust Systems
Porous titanium sheets are highly desirable for use as the porous transport layer (PTL) in polymer electrolyte membrane (PEM) water electrolyzers. However, the passivation of titanium leads to an increase in surface contact resistance, thereby negatively affecting the performance of the electrolyzer. To address this issue and ensure long-term operation, a common approach is to apply platinum or gold coatings on titanium-based PTLs. Parameters Material: Sintered Porous Titanium Sheet Coating: Platinum (Pt) The thickness of platinum: 1 micron Porosity: Customizable, commonly between 30% and 40% Pore Size: 10 microns Size: 46*46* 2mm Features Enhanced Conductivity: The platinum coating on sintered porous titanium sheets provides excellent electrical conductivity, facilitating efficient electron transfer during electrochemical reactions. Durability and Corrosion Resistance: Titanium's inherent corrosion resistance, combined with the protective platinum coating, ensures prolonged electrode lifespan, even in aggressive chemical environments. High Surface Area: The porous structure of the titanium sheets offers a large surface area, enabling more active sites for electrochemical reactions and enhancing cell efficiency. Customizable Pore Size: The pore size of sintered porous titanium sheets can be tailored to specific applications, allowing for optimized mass transport and improved electrolyte flow. Applications Chlor-Alkali Industry Water Treatment Fuel Cells Electrosynthesis
