Silicone Manual Resuscitator (Surviup) Suppliers and Manufacturers

Code 85750: Anchor wound dressings on fragile or at-risk skin Features Anchors wound dressings on fragile or at-risk skin. Secures tubing and devices. Gentle yet secure, waterproof and snug fit. Color: Flesh Tear type: Easy-tear or normal Size: 2.50 cm x 150 cm 5.00 cm x 150 cm

Hospital Bed Single Crank Manual three function long hole manual adjustable height medical bed

Code 82700: Moisturizes, lightens the scar, hypoallergenic Features 1. Flesh color silicone sheeting with hypoallergenic adhesive. 2. Snug-fitting, washable and reusable for more than 15 times. 3. Pain-free and easy removal. Size: 1 cm x 10 cm x 1 sheet Material: PU, silicone gel

We supply the Quality Ferro Alloys Like Silico Manganese HC Grade I II Mn 60% min 65% Min Si 14% Min 15% Min / 16% Min C 2.50% Max 2% Max S 0.03% Max 0.03% Max P 0.30% Max 0.30% Max Silicon Manganese Size : 10 - 60 mm Mn; 65 to 70% Si : 16 %c : 2 % P : 0.15 % S : 0.01 % High Carbon Silico Manganese - Standard Grades Mn : 60% Min. / 65% Min. / 70% Min. Si : 15% Min. / 16% Min. / 17% Min. C : 2 % Max. P : 0.30 % Max. S : 0.03 % Max. Size: 10 - 60 mm

Silicone Foam Wound Dressing the silicone dressing is a highly absorbent dressing made from hydrophilic polyurethane foam, ideally designed for heavily exuding wounds. The soft flexible foam absorbs large amount drainage, ensures patients comfort; the top backing film protect wounds against external bacterial. It's a disposable sterile product,it consists of silicone gel and polyurethane foam ,it has high liquid absorptive volume, isolates the wound penetrent liquid from the wound effectively,and reduce the possibility that the wound is infected.The product can form and keep a moist environment,promote wound healing ,and reduce the second damage when changing the dressing. Information for Use: 1)clean the wound with saline. 2)dry skin around the wound, select the appropriate specification ( crop the product if necessary ). Cover the wound completely. 3)tear the face mask, Stick to the wound. 4)use the second dressing to fix (island). Applications: Pressure ulcer Leg venous ulcer Diabetic foot ulcer First and second degree burns Skin grafts and donor site Post-operative and traumatic wounds Advantages: high absorptive volume of liquid isolate the wound penetrent liquid from wound, reduce the infection heal without scab,reduce the scar promote wound healing

Silicone Foam Wound Dressing the silicone dressing is a highly absorbent dressing made from hydrophilic polyurethane foam, ideally designed for heavily exuding wounds. The soft flexible foam absorbs large amount drainage, ensures patients comfort; the top backing film protect wounds against external bacterial. It's a disposable sterile product,it consists of silicone gel and polyurethane foam ,it has high liquid absorptive volume, isolates the wound penetrent liquid from the wound effectively,and reduce the possibility that the wound is infected.The product can form and keep a moist environment,promote wound healing ,and reduce the second damage when changing the dressing. Information for Use: 1)clean the wound with saline. 2)dry skin around the wound, select the appropriate specification ( crop the product if necessary ). Cover the wound completely. 3)tear the face mask, Stick to the wound. 4)use the second dressing to fix (island). Applications: Pressure ulcer Leg venous ulcer Diabetic foot ulcer First and second degree burns Skin grafts and donor site Post-operative and traumatic wounds Advantages: high absorptive volume of liquid isolate the wound penetrent liquid from wound, reduce the infection heal without scab,reduce the scar promote wound healing

We are Indonesia Hardwood Charcoal Producer ***** Not Trading company **** We shipped under our own exporter name **** Supply to XIAMEN / DAHLIAN / QINZHOU Port , China , for SILICON Melting Factory ***** Wood Charcoal sizes 5 cm up ***** Moisture content under 13 % - Fix Carbon 6500 up ***** Loading in 40ft = 18 ton - 20 ton ***** Packing in PP Woven bags ***** Price CNF QINZHOU - XIAMEN - DAHLIAN CIF USD 260 ***** Production Capacity 200 container / month ***** Payment by 30% Deposit and 70% Balance against copy of BL **** WE DO NOT ACCEPT L/C *****MOQ trial order 2 containers ***** production capacity 20 container for 1 buyer ^^^^^ Mentioned in B/L Wood Charcoal - Not Wooden products *** Ship by legally shipping liner and mentioned BL Wood Charcoal HS code 440290

We are Indonesia Hardwood Charcoal Producer ***** Supply to QINZHOU Port , China , for SILICON Melting Factory ***** Wood Charcoal sizes 5 cm up ***** Moisture content under 13 % - Fix Carbon 6500 up ***** Loading in 40ft = 18 ton - 20 ton ***** Packing in PP Woven bags ***** Price CNF QINZHOU USD 360 = 2.400 RMB ***** Production Capacity 200 container / month ***** Payment by 30% Deposit and 70% Balance against copy of BL ***** Sample order 4 containers ***** Mentioned in B/L Wood Charcoal by WanHai Shipping Lines

Kelo-Cote is a patented silicone gel for the prevention and treatment of hypertrophic scars and keloids resulting from surgery, trauma, wounds or burns. Kelo-Cote is a silicone gel that: - Reduces the redness of scars. - Makes raised scars smoother and flatter. - Relieves the itching and pain of scars. Indications : For the prevention and treatment of hypertrophic scars and keloids resulting from surgery, trauma, wounds or burns Directions for use : For recent scars: apply to a clean, dry scar once healing is complete or sutures have been removed. Apply a very thin layer of Kelo-Cote to the scar, twice a day, without massaging. Allow to dry for 5 minutes to form a soft, transparent, water resistant film - remove excess if film does not dry. Once dry, it can be covered with sunscreen or makeup. The recommended treatment period is 2-3 months. Continue treatment if improvements are still seen. Content : Tube 6 g

Micro Silica Sand: Micro silica also known as fume, is an amorphous (non-crystalline) polymorph of silicon dioxide, silica. It is an ultrafine powder collected as a by-product of the silicon and ferrosilicon alloy production and consists of spherical particles with an average particle diameter of 150 mm. The main field of application is as pozzolanic for high performance concrete because of its extreme fineness and high silica. Applications : Silica is added to Portland cement concrete to improve its properties, in particular its compressive strength, bond strength, and abrasion resistance. These improvements stem from both the mechanical improvements resulting from addition of a very fine powder to the cement paste mix as well as from the pozzolanic reactions between the silica fume and free calcium hydroxide in the paste. Advantages : Addition of silica also reduces the permeability of concrete to chloride ions, which protects the reinforcing steel of concrete from corrosion, especially in chloride-rich environments such as coastal regions and those of humid continental roadways and runways (because of the use of deicing salts) and saltwater bridges.

Raw Bauxite: Bauxite is a soft, whitish to reddish-brown rock consisting mainly of alumina-bearing hydroxides, oxides of iron, silicon and titanium with impurities of Ca, Mg, Cr, V, P, Ga and other elements. Raw Bauxite is a major source of aluminium. Basic alumina containing minerals of Bauxites are gibbsite Al(OH)3, Boehmite g-AlO(OH) and Diaspore a-AlO(OH). We are a major Raw Bauxite Exporter based in Maharashtra (India) and catering to the diverse demands of several middle and eastern Asian countries. About Raw Bauxite: The processing of Raw Bauxite is done at a number of alumina refineries in the world. Bauxite can be processed at a low-temperature autoclave digestion (145 oC to 155 oC). Raw Bauxite can be used also for sweetening stage and for non-autoclave digestion in agitators (105 oC). About 85% of bauxite mined worldwide is used to produce alumina for refining into Aluminium metal and the balance 15% is processed and value added to make its way to other uses like refractory, chemical, cement, abrasives, etc. Aluminium is possibly the most versatile product with applications in almost every industry. Since Bauxite is the primary source for Aluminium there will always be an ongoing promising demand for the same. Application & Uses of Bauxite: Raw Bauxite is successfully used for metallurgical grade alumina production besides applications in the cement industry, alumina chemical, steel, alum, energy industries, flame-retardants, etc. Bauxite is used in : - Aluminium - Cement - Chemical - Blast Furnaces - Iron/Steel Ladles, etc. Advantages of Artha Bauxite: Artha Mineral Resources has good sources for Gibbsitic Bauxite which requires low digestion temperature (145 oC -155 oC) making it more economical to process. Mines are also in close proximity to all-weather ports which makes it very convenient and cost effective to ship this material.

Fly Ash: Fly Ash is by product generated during combustion of coal, and comprises the fine particles that rise with the flue gases. Ash which is collected from the bottom is termed bottom ash. Fly ash is collected by electrostatic precipitators or other particle filtration equipment before the flue gases reach the chimneys of coal-fired power plants and together with bottom ash removed from the bottom of the furnace is in this case jointly known as coal ash. Depending upon the type of coal being used, the specification of Fly Ash varies considerably, but Fly Ash contains substantial amounts of silicon dioxide and calcium oxide (CaO), both being endemic ingredients in many coal-bearing rock strata. We are a reputed Fly Ash Exporter based in India and are supplying Fly Ash different cement, ready mix concrete, steel, refractories and construction industries. The Major Utilization Areas Of Fly Ash : - Manufacture of Portland Pozzolanic Cement & Performance improver in Ordinary Portland cement (OPC). - Part replacement of OPC in cement concrete. - High volume Fly Ash concrete. - Roller Compacted Concrete used for dam & pavement construction. - Manufacture of ash bricks and other building products. - Construction of road embankments, structural fills, low lying area development. - As a soil amender in agriculture and wasteland development. Types of Fly Ash: - According to the type of coal used fly is classified into two types. Anthracite and bituminous coal produces Fly Ash classified as class F. Class C Fly Ash is produced by burning lignite or sub-bituminous coal. Class C Fly Ash has self-cementing properties. - Class F and Class C Fly Ash are products of the combustion of coal in large power plants. Fly Ash is collected in electrostatic precipitators or baghouses, and then transferred to large silos for shipment. When needed, Fly Ash is classified by precise particle size requirements, thus assuring a uniform, quality product. - Class F Fly Ash is available in the largest quantities. Class F is generally low in lime, usually under 15 percent, and contains a greater combination of silica, alumina and iron (greater than 70 percent) than Class C Fly Ash. - Class C Fly Ash normally comes from coals which may produce an ash with higher lime content generally more than 15 percent often as high as 30 percent. Elevated CaO may give Class C unique self-hardening characteristics. Minimum Order Quantity : 1 container