75 reducer introduction 75 this involute cylindrical gear reducer reducer, select material, fine process is reasonable. Output driven by two wheels (one of which is a medium wheel drive, has a large carrying capacity, high transmission efficiency, is widely used in mining machinery, construction machinery, cement machinery, etc. 75 reducer working conditions Reducer high speed shaft speed is generally not more than 1500 r/min, gear peripheral velocity is not more than 10 m/s. Reducer using the environment temperature 40when the environmental temperature is below 0 starts, deal with lubricating oil preheated.When the environment temperature is higher than 45 , cooling measures dealing with reducer. New speed reducer and the forward and reverse operation. Working environment for the erosive. Please phone
Digital calipers Digital calipers: 100mm/4' , 150mm/6' , 200mm/8' , 300mm/12' Vernier calipers(stainless steel or carbon steel):100mm/4', 150mm/6', 200mm/8', 300mm/12', Outside micrometers:0-25mm , 25-50mm , 50-75mm , 75-100mm , 100-125mm , 125-150mm , 150-175mm , 175-200mm , 200-225mm , 225-250mm , 250-275mm , 275-300mm Electronic outside micrometers: 0-25mm , 25-50mm , 50-75mm , 75-100mm , 100-125mm , 125-150mm , 150-175mm , 175-200mm Inside micrometers(single rod):25-32mm , 50-75mm , 75-100mm , 100mm-125mm , 125-150mm, 975-1000mm Electronic three-point internal micrometers:6-8mm , 8-10mm , 10-12mm , 12-16mm , 16-20mm , 20-25mm , 25-30mm , 30-40mm , 40-50mm , 50-63mm , 62-75mm , 75-88mm , 87-100mm Inside micrometers: 5-30mm, 25-50mm, 50-75mm, 75-100mm, 100-125mm, 125-150mm, 150-175mm, 175-200mm. Electronic inside micrometers: 5-30mm, 25-50mm, 50-75mm, 75-100mm, 100-125mm, 125-150mm, 150-175mm, 175-200mm. Dial indicators:0-3mm , 0-5mm , 0-10mm , 0-20mm , 0-30mm , 0-50mm , 0-0.25' , 0-0.5' , 0-1', 0-2' Electronic indicators: 0-12.7mm , 0-0.5' Dial bore gauges: 6-10mm , 10-18mm , 18-35mm , 35-50mm , 50-100mm , 50-160mm , 100-250mm , 250-450mm , 0.24-0.4' , 0.4-0.7' , 0.7-1.5' , 1.4-2.4' , 2-4' , 2-6' , 6-10' , 10-16' , Dial thickness gavges:0-1mm , 0-10mm , 0-20mm , 0-25mm , 0-0.5' , 0-1' , Depth vernier calipers(stainless stell or carbon steel):150mm , 200mm , 300mm , 6' , 8' , 12' , Dial calipers:100mm, 150mm , 200mm , 300mm , 4', 6' , 8' , 12', Depth micrometers: 0-25mm, 0-50mm, 0-100mm, 0-150mm, 0-200mm, 0-300mm. Electronic depth micrometers: 0-25mm, 0-50mm, 0-100mm, 0-150mm, 0-200mm, 0-300mm. Magnetic stand: 40kgs, 60kgs, 60kgs. Many kinds of special measuring tool In plastic or wooden box
HMS1 Payment: Unconditional SBLC, Delivery: 25-45 days Lead time Packaging: Break Bulk/Vessel Performance Bond: 2% Origin: UK Loading Port: Felixstowe, UK Inspection: SGS/CCIC or Equivalents. Proceedure: 1.BUYER issue LOI + BCL (MT 799) 2.Seller issue FCO 3.Buyer signs the FCO and sends it to the Seller 4.Seller issues Draft Contract. 5.Buyer signs the Draft contract and sends it to the seller. 6.Seller sends hard copies to buyer by courier. 7.Buyer's Bank opens Transferable SBLC / Transferable LC for seller as agreed by seller's Bank. Buyer uses US, Western Europe or Hong Kong Prime Banks for confirmation. 8.Seller sends site visit invitation. 9.Upon receiving the agreed SBLC, seller activates 2 % Performance Bond. 10.Seller checks quantity and quality with SGS at loading port. 11.At the buyer's request, the seller will allow the buyer or his representative to be present at loading port. 12.Seller begins shipments. Specifications: isri-codes: hms 1 isri200-202 Physical Analysis: No. 1 heavy melting steel. Wrought iron and/or steel scrap 1/4 inch and over in thickness. Individual pieces not over 60 x 24 inches (charging box size) prepared in a manner to insure compact charging. 201 No. 1 heavy melting steel 3 feet x 18 inches. Wrought iron and/or steel scrap 1/4 inch and over in thickness. Individual pieces not over 36 inches x 18 inches (charging box size) prepared in a manner to insure compact charging. ISRI 202 No. 1 heavy melting steel 5 feet x 18 202 No. 1 heavy melting steel 5 feet x 18 inches. Wrought iron and/or steel scrap 1/4 inch and over in thickness. Individual pieces not over 60 inches x 18 inches (charging box size) prepared in a manner to insure compact charging. 203 No. 2 heavy melting steel. Wrought iron and steel scrap, black and galvanized, 1/8 inch and over in thickness, charging box size to include material not suitable as No. 1 heavy melting steel. Prepared in a manner to insure compact charging. 204 No. 2 heavy melting steel. Wrought iron and steel scrap, black and galvanized, maximum size 36 x 18 inches. May include all automobile scrap properly prepared.205 No. 2 heavy melting steel 3 feet x 18 inches. Wrought iron and steel scrap, black and galvanized, maximum size 36 x 18 inches. May include automobile scrap, properly prepared, however, to be free of sheet iron or thin gauged material. 206 No. 2 heavy melting steel 5 feet x 18 inches. Wrought iron and steel scrap, black and galvanized, maximum size 60 x 18 inches. May include automobile scrap, properly prepared, however, to be free of sheet iron or thin gauged material. Contains no harmful agents, wooden particles, Shell or any other explosive agents Above is the requested Draft Offer for HMS 1. Buyer is required to send LOI in order to proceed under normal business terms. Chemical composition used rails: C:0,54-0,82 SI.:0,18-0,40 Mn:0,60-1,05 S:0.04 max P.:0,035 max As.:0,01 max of mass share Norms: R-50 gost-7173-75 and r-65 gost-8165-75
Idc wire gauge: 22-26 awg, solid or stranded Colour coding: as per 568 a/b standard Spring wire: phosphor bronze alloy plated with 50 micro-inch of gold over 70-100 micro-inch of nickel Idc: phosphor bronze alloy with 100 micro-inch 100% nickel plating Conductor termination: >200 Insulation diameter: 0.7-1.4mm Flammability rating: ul 94 v-0 Safety rating: ul 1863 Wire: 22-26 awg
Ultrasonic thickness meter Ultrasonic thickness gauge series Tr-8812 /tr-8811 tr-8810 Measuring range:1.0~225mm /1.2~200mm / 1.2~200mm 0.05~9 inch /0.06~8 inch /0.06~8 inch Sound velocity: 500~9000m/s. Resolution : 0.1mm. Accuracy: +/-(0.5%n+0.1).Operating conditions : 0~400c/10~90%rh. Dimensions: 120*62*30mm /160*68*32mm . Weight: 164g/208g
1) good quality, competitive price; 2) fast delivery, huge stock; 3) famous brand and good after-service; 4)10 years experience ML-28/32/36/40-92P-0 L-14/16/20-66-0 AL-9-6-38 ML-28/32/36/40-92H-0 L-28/32/36-66-0 AL-18-6-32 ML-28/32-93-0 L-20-3-41 AL-18-6/2-38 ML-24/28/32-93-49 L-24/28-0-49 AL-18-26-38 ML-28/32-93H-0 L-6/12/14/22/24/28/32-66-49 AL-24-26/3-38 ML-28/32-93-0 L-9/20/24/18-0-0 AL24-26-38 KL-28/32-92-0 L-32-0-0 AL-14-80-58 KL-28/32-93-49 L-24/2-0-49 AL-16-80-58 KL-16/24-93-49 L-24/2-42-54 KL-6/1(6/2)-78-23 L-24/2-84-63 KL-6-78/75-23 L-12/14/18/24-73-49 L-28/32-66-65 LJ-16-8/2-28 L-28/32/36-93-0 LJ-14-29/2-28 L-16/24/28/32/36-93-49 DL-9/14/18/24-17-9
Comprehensive Technical Characteristics of Inverter Input-output Characteristics: Input Voltage Range: 380/220V±15% Input Frequency Range: 47-63Hz Output Voltage Range: 0-rated input voltage Output Frequency Range: 0-400Hz Peripheral Interface Characteristics Programmable Digital Input: 6 channel input Programmable Analog Input: 0-10V input, FI: 0-20mA or 4-20mA input Open Collector Output: 1 channel output input Relay Output: 1 channel output Analog Output: 1 channel output, optional 0-20mA or 0-10V Technical Performance Characteristics Control Mode: SVC, V/F direct torque control Overload Capacity: 150% rated current 60s; 180% rated current 10s Starting Torque: SVC: 0.5Hz/150% (SVC) Speed Regulation Ratio: SVC: 1:100 Speed Control Accuracy: SVC; ±0.5% maximum speed Carrier Frequency: 0.5k-15.0kHz I5300_Elevator_closed_loop_inverter_2017 I5300_Elevator_closed_loop_inverter_2017 Name rules: I5300E_closed_loop_inverter_name_rules I5300E_closed_loop_inverter_name_rules Specification: 1.Applies to the driving control of permanent-magnet synchronous motor and asynchronous motor, possessing different kinds of rotary encoder interfaces; 2.Self-tuning function of motor parameters, including static tuning and full tuning; 3.Quick startup of curve processing, multi-stage S curve settings and 4-stage acceleration and deceleration time settings ensure the sense of comfort during the running of the elevator; 4.Simple and practical battery running function, the input of 48V power supply can complete self-help when power is off; 5.Enable inspection�brake contactor control, output contactor control, forced deceleration judgment, over speed testing, speed deviation testing, advanced door open, contact conglutination testing, motor overheat testing, startup pre-torque compensation and other elevator special functions make elevator control easier; 6.The unique one-button design on the operation panel make complicated keyboard operation easy; 7.Built-in DC reactor and braking unit improve output power factor of the system and reduce the cost of outside components of the electrical system� 8.The whole series of independent duct design, professional lightning protection design, professional manufacture platform and advanced processs control ensure the quality of I5300 specialized Elevator inverter; Main parameters of the I5300 Elevator inverter (IP model included) Model Capacity KW Input current Output current Adoptable motor kW A A 3-phase 380V range�-15%�20% I5300-4002 4 5.8 5.1 2.2 I5300-4003 5.9 10.5 9 3.7 I5300-4005 8.9 14.6 13 5.5 I5300-4007 11 20.5 18 7.5 I5300-4011 17 29 27 11 I5300-4015 21 36 33 15 I5300-4018 24 41 39 18.5 I5300-4022 30 49.5 48 22 I5300-4030 40 62 60 30 I5300-4037 57 77 75 37 I5300-4045 69 93 91 45 Iacdrive_Elevator_solutions_inverter Iacdrive_Elevator_solutions_inverter Copyright 2012-2017 Iacdrive| All Rights Reserved | Powered by Iacdrive | Suunny -
Dongfang Yoyik Engineering Co., Ltd is a manufacturer and trader of industrial products. We mainly offer spare parts of turbines and generators. Kinds of pumps for EH system, valves, filters and filter elements, and other industrial tools and replacements. Our products and service are quality guaranteed. BAFFLE 3Q7320 Oil Pressure Gauge 233.50\100\25BAR\G1\4B Heating rod ZJ-20-8B Excitation Regulator Output Module ADAM4068 Eccentric Module DF2042 Pressure Switch 9.6MPa 4.9MPa Thermal Resistance WZPK2-630 Thermalcouple WRNK2-291, 5, L=500, K Low Resistance Probe CS-1(D-100-05-01) steam turbine bolt heater ZJ-17-T5 steam turbine bolt heater ZJ-20-43R Proximitor WZK.W.10.A81085 Switch I/O Module P32C32 Limit Switch SP-3969 BAFFLE 3Q7320 Speed monitor display instrument SJK-B Servo Controller SCU03, WINELEC steam turbine bolt heater ZJ-18-430 Sensor CS-1 G-100-02-01 LVDT Position Sensor TD-1 0-350 Excitation Plug-In HD354-1F-28 3L8041-2V.1 GES6620 DEH Servo Card Case M902-024000A steam turbine bolt heater ZJ-22-16 LVDT Position Sensor HTD-150-6 LVDT Position Sensor TDZ-1-H 0-60 Rotation Speed Probe ZS-01 L=80 A/D Converter DZXL-ZL-E 6682 BENTLY Preamplifier 330878-05-00 Bimetallic thermometer WSS-481\0~100\75 Limit Switch D4A-4501N Displacement sensor HTD-100-3 Pressure switch 403216-29QL14 BAFFLE 3Q7320 ã??2019-09-24-DFJerryã??
(1)CaF2: 75% MIN SiO2: 24% MAX Size: 0-80mm 90% min (2)CaF2: 80% MIN SiO2: 19% MAX Size: 0-80mm 90% min (3)CaF2: 85% MIN SiO2: 14% MAX Size: 0-80mm 90% min (4)CaF2: 90% MIN SiO2: 9% MAX Size: 0-80mm 90% min (5)CaF2: 95% MIN Size: 10-20mm 90% min (6)CaF2: 98% MIN Size: 10-20mm 90% min -Package: customized jumbo bag -Support the third party inspection -Origin: China Mongolia -Competitive price
Nutrition facts Serving size 100g Amounts per serving Calories 630 kcal calories from fat 440 kcal * % daily values Total fat 49 g 75 % Saturated fat 11 g 55 % Monounsaturated fat 24 g Polyunsaturated fat 14 g Trans fat 0 g Cholesterol 0 mg 0 % Sodium 230 mg 10 % Total carbohydrate 21 g 7 % Dietary fibre 8 g 32 % Sugar 4 g Protein 26 g Vitamin a 0 mg 0 % Vitamin c 0 mg 0 % Calcium 100 mg 10 % Iron 2.7 mg 15 % * percent daily values are based on a 2000 calorie diet. 14g, 28g, 62g, 185g
Zl-ly-75 Volt: 24¡à5% vdc Inlet pressure: 0 psi Working pressure: 70 psi Flow at 70 psi ¡ý800ml/min Max pressure:130¡à10 psi Working current: ¡ü1.2a Rated current: 1.5a Temperature of motor shell: ¡ü50¡æ (after 24 hours of continuous running) Noise£º¡ü50db£» 192*100*99mm 2.2kg
APEXWAY, a leading tire manufacturer since 1975, offers a full range of solid tires for telescopic handler, telehandler forklift. Designed for Construction Sites, Warehousing, Logistics, Ports Handing, Freight Handling, Waste Management, Agricultural Applications, Agricultural Products Handing, Grains Handling and Farming Equipment Handling. Sizes available: 12 to 24 inches. Trust APEXWAY for reliable and durable solid telescopic handler tires, solid telehandler forklift tires. - Application: Telescopic Handler, Telescopic Forklift, Telehandler Forklift, Telehandler Loader, Boom Lift Forklift, Telehandler Crane, Telescopic Handler Forklift, Compact Wheel Loader, Loadall, Reach Stacker. - Operating Environments: Construction Sites, Warehousing, Logistics, Ports Handing, Freight Handling, Waste Management, Agricultural Applications, Agricultural Products Handing, Grains Handling and Farming Equipment Handling. - Solid Telescopic Handler, Telehandler Forklift Tires Size: 12 inch= 27x10-12 27x10x12 250/75-12 15 inch= 8.15-15 8.15x15 28x9-15 28x9x15 225/75-15 225/75x15 16 inch= 31x10.5-16 31x10.5x16 20 inch= 30x10-20 30x10x20, 32x10-20 32x10x20, 31x10.5-20 31x10.5x20, 33x12-20 33x12x20, 36.5x12-20 36.5x12x20, 36.5x14-20 36.5x14x20, 9.00-20 9.00x20, 10.00-20 10.00x20, 16/70-20 16/70x20 405/70-20 405/70x20, 385/70-20 385/70x20, 445/65-20 445/65x20, 15.00-20 15.00x20, 18.00-20 18.00x20 24 inch= 385/65-24 385/65x24, 445/65-24 445/65x24, 13.00-24 13.00x24 13x24, 14.00-24 14.00x24 14x24, 16.00-24 16.00x24 16x24 50x16-24 50x16x24 25 inch= 15.5-25 15.5x25, 16.00-25 16.00x25, 17.5-25 17.5x25, 18.00-25 18.00x25, 20.5-25 20.5x25, 29.5-25 29.5x25 - The following inflatable tire sizes can be replaced with APEX solid tires: 18 inch= 10.5/80-18 10.5/80x18 12.00-18 12.00x18 12x18, 12.5/80-18 12.5/80x18, 12.5-18 12.5x18 20 inch= 9.00-20 9.00x20 9x20, 10.00-20 10.00x20 10x20, 12.00-20 12.00x20 12x20, 12.5-20 12.5x20, 16/70-20 16/70x20, 400/70-20 400/70x20 400/70R20, 405/70-20 405/70x20 405/70R20 22.5 inch= 18-22.5 18x22.5 18.00-22.5 18.00x22.5 18.00R22.5, 18/65-22.5 18/65x22.5, 385/65R22.5, 425/65R22.5, 445/65-22.5 445/65x22.5 445/65R22.5 24 inch= 13.00-24 13.00x24 13.00R24 13x24, 14.00-24 14.00x24 14x24 14.00R24, 15.5/80-24 15.5/80x24, 15.5-24 15.5x24, 16.00-24 16.00x24 16x24, 16/70-24 16/70x24, 17.5/80-24 17.5/80x24, 17.5-24 17.5x24 17.5R24, 19.5R24, 400/70-24 400/70x24 400/70R24, 400/80-24 400/80x24 400/80R24, 405/70-24 405/70x24 405/70R24, 440/80-24 440/80x24 440/80R24, 445/70R24, 460/70-24 460/70x24 460/70R24, 500/70-24 500/70x24 500/70R24 25 inch= 15.5x25 15.5R25, 16.00x25 16x25 16.00R25, 17.5R25, 18x25 18.00R25, 20.5R25, 29.5R25, 445/80R25, 445/95R25 Welcome to contact us. APEXWAY. Tires that fit.
Series number:TM075M-36 - TM090M-36 Manufacturer:TM Solar Power Co.,Ltd. Jiangyin City, China High cell efficiency PV solar panel with quality silicon material for long term output stability and reliability. Rigorous quality control to meet the highest international standards. High transmittance, low iron tempered glass with enhanced stiffness and impact resistance. Unique frame design with high mechanical strength for easy installation. Advanced encapsulation material with multilayer sheet lamination to provide long-life and enhanced cell performance. Outstanding electrical performance under high temperature and low irradiance conditions. 36 Back-Contact monocrystalline Si solar cells (approx. 20%). Applications: Commercial/ industrial building PV solar roof-top off-grid systems. Residential PV solar roof-top off-grid systems. Any commercial / industrial ground mount off-grid systems. Other off-grid industrial and commercial solar PV applications. Warranty: 1. Seller should adopt best materials and workmanship to manufacture and supply the above stated commodities to Buyer, 100% checked and TUV,VDE,UL,MCS standards compliant 2. 10 years warranty for not less 90% rated power output, and 25 years for not less 80% output 3. 100% Dielectrical safety test and checking 4. 10 year workmanship warranty, would be enclosed with the supplied products. Certifications: TUV SUD£¨IEC61215 IEC61730 CQC MCS Electrical Characteristics: All specified Parameters are at STC 25 Ambient, 1000W/ m irradiance and AM 1.5 Type TM075M-36 TM080 M-36 TM085 M-36 TM090 M-36 Max-Power Pm(W) 75 80 85 90 Module-Power Range(W) 80>Pm 75 85>Pm 80 90>Pm 85 Pm 90 Power Tolerance(W) +0~+5 +0~+5 +0~+5 +0~+5 Max-Power Voltage(V) 17.8 18.2 18.5 18.5 Max-Power Current lm(A) 4.22 4.4 4.59 4.86 Short-Ciruit Current lsc(A) 4.72 4.89 5.14 5.3 Open-Circuit Voltage Voc(V) 21.6 22.1 22.2 22.4 Max-System Voltage(VDC) 715V(IEC) Cell Efficiency(%) 14.0/13.5 15/14.4 15./15.2 16.8/16.1 Module Efficiency(%) 11.6 12.4 13.1 13.9 Max.Series Fuse(A) 10 Pm Temperature Coefficients(W/centigrade) -0.9964 Lsc Temperature Coefficients(A/ centigrade) 0.0023 Voc Lsc Temperature Coefficients(V/ centigrade) -0.1801 NPCT Nominal Operating Cell Temperature 47¡À2 centigrades Mechanical Characteristics Cable type,Diameter and Length 4mm,TUV certified,1000mm Type of Connector Compatible Type IV Number,type and arrangement of cells 36 pcs, Mono-Crystalline Silicon(4, 9) Cell Size(mm) 156, 156(D200) Dimension(mm) 1482, 676, 40 Weight(kg) 12 No.of Draining Holes in Frame 10 Glass,Type and Thickness High Transmission,Low lron,Tempered Glass 3.2mm Packaging Configuration: Packing Configuration 24 pcs/box or 2 pcs/box Quantity/Pallet 56pcs/pallet Loading Capacity 840pcs/40ft Absolute Ratings: Dielectric Insulation Voltage 3000V Operating Temperature(centigrade) -40 - +85 Storage Temperature(centigrade) -40 - +85. Cell size: 125 x 125mm (D: 150/165mm), Cell array: 4 9, 36pcs / panel, Dimension: 1195 x 541 x 30mm, Gross weight: 8 kgs / panel, Draining holes at frame: 10.
APEXWAY, one of the leading tire experts in Taiwan since 1975. We are aim to provide outstanding products and efficient design solutions that fulfill customers needs and steadily supply baggage cart tire & wheel. We are able to supply solid tires for Airport Grounding Support Equipment. - Application: Airport Trailer, Baggage Cart, Baggage Trailer, Baggage Trolley, Cargo Dolley, Dolly Trailert, Luggage Trailer, Universal Trailer, Container Dollys, GSE Trailer, Air Start Unit, Ground Power Unit, Handler Vehicle, Lavatory Service Vehicle, Transporter. - Type: Non-mobilized - Airport GSE Solid Tire Size: 5 inch= 3.50-5 8 inch= 4.00-8, 5.00-8, 15x4 1/2-8, 15x4.5-8, 125/75-8, 18x7-8, 180/70-8 9 inch= 6.00-9, 21x8-9, 200/75-9 10 inch= 6.50-10, 7.50-10, 23x9-10, 225/75-10 12 inch= 7.00-12, 23x10-12, 250/60-12 15 inch= 5.50-15, 6.00-15, 7.00-15, 29x8-15, 7.50-15, 8.15-15, 28x9-15, 225/75-15, 250-15, 250/70-15, 8.25-15, 300-15, 315/70-15, 28x12.5-15, 355/45-15, 32x12.1-15 16 inch= 7.50-16, 195/95-16 20 inch= 10.00-20, 12.00-20 24 inch= 12.00-24, 14.00-24 25 inch= 16.00-25 - Other Services: v Offers wheel assembly services, providing convenience and ease of use for customers. v If you have another pneumatic tire size or vehicle model, please consult the APEXWAY team for a replacement. Welcome to contact us. APEXWAY. Tires that fit.
Size of Bag: 13" Width x 15" Height x 6" Gusset Fabric Quality: 15 * 14 Supreme 100% Jute - 290 Grams / SM [15 Jute Strands by 14 Jute Strands Per 1 Square Inch] Lamination : Yes - Virgin Quality from Eskay PP 75 Grams / SM [For Natural] & 70 Grams / SM [For Dyed] Bag Color: Off White Gusset Color: Off White Handle Color: Natural Cotton White Color Handle Size: 24" End To End Length x 1.5" Diameter or As Per Bag Size Handle Type: Cotton Webbed Padded Premium Quality SIZE Width [Horizontal Dimension] : 13 inches / 34 cm Height [Vertical Dimension] : 15 inches / 38 cm Gusset [Side Panels] : 6 inches / 15 cm Handle [End To End] : 24 inches / 61 cm
Size of Bag: 17" Width x 13" Height x 5" Base Fabric Quality: 15 * 14 Supreme 100% Jute - 290 Grams / SM [15 Jute Strands by 14 Jute Strands Per 1 Square Inch] Lamination : Yes - Virgin Quality from Eskay PP 75 Grams / SM [For Natural] & 70 Grams / SM [For Dyed] Bag Color: Natural Jute Handle Color: Dyed To Match Bag Color Handle Size: 24" End To End Length x 1.5" Diameter or As Per Bag Size Handle Type: Cotton Webbed Padded Premium Quality SIZE Width [Horizontal Dimension] : 17 inches / 43 cm Height [Vertical Dimension] : 13 inches / 34 cm Base : 5 inches / 14 cm Handle [End To End] : 24 inches / 61 cm
APEXWAY, a leading tire manufacturer since 1975, offers a full range of solid tires for skid steer loaders. Designed for construction, rental, equipment service yards, pavement maintenance, site cleanup, landscaping, warehouse applications. Sizes available: 12 to 25 inches. Trust APEXWAY for reliable and durable solid skid steer tires. - Application: Skid Steer Loaders, Skid Loaders, Skid Steers, Mini Loaders, Construction Loaders, Timber Loggers. - Operating Environments: Construction Sites, Roadwork, Pavement Maintenance, Landscaping, Grounds Maintenance, Roadwork Projects, Pavement Maintenance Activities, Warehouses, Logistics Centers, Material Handling, Distribution Operations, Demolition, Site Cleanup, Rental, Equipment Service Yards, Mining and Quarrying, Agriculture, Farming. - Solid Skid Steer Tires Size: 12 inch= 5.70-12 5.70x12, 23x8.5-12 23x8.5x12 15 inch= 27x8.5-15 27x8.5x15, 27x12-15 27x12x15 16 inch= 30x8.5-16 30x8.5x16, 30x10-16 30x10x16, 7.50-16 7.50x16, 195/95-16 195/95x16, 31x10.5-16 31x10.5x16, 32.5x15-16 32.5x15x16, 8.25-16 8.25x16, 205/95-16 205/95x16, 33x12-16 33x12x16 18 inch= 30x10-18 30x10x18, 31x10.5-18 31x10.5x18 20 inch= 30x10-20 30x10x20, 31x10.5-20 31x10.5x20, 32x10-20 32x10x20, 33x12-20 33x12x20, 36.5x12-20 36.5x12x20, 36.5x14-20 36.5x14x20, 15.00-20 15.00x20, 38.5x14-20 38.5x14x20, 16/70-20 16/70x20, 405/70-20 405/70x20, 385/70-20 385/70x20 24 inch= 385/65-24 385/65x24, 445/65-24 445/65x24, 13.00-24 13.00x24, 14.00-24 14.00x24 25 inch= 15.5-25 15.5x25 - The following inflatable tire sizes can be replaced with APEX solid tires: 12 inch= 5.70-12 5.70x12, 7.00-12 7.00x12, 23x5.7-12 23x5.7x12, 23x8.5-12 23x8.5x12 15 inch= 7.00-15 7.00x15, 10.5-15 10.5x15, 27x8.5-15 27x8.5x15, 27x10.5-15 27x10.5x15, 31x15.5-15 31x15.5x15 15.3 inch= 10.0/75-15.3 10.0/75x15.3 15.5 inch= 33-15.5 33x15.5 16.5 inch= 10.0/75-16.5 10.0/75x16.5, 10-16.5 10x16.5 10.00-16.5 10.00x16.5, 12-16.5 12x16.5 12.00-16.5 12.00x16.5, 13-16.5 13x16.5, 15.5-16.5 15.5x16.5, 31x12-16.5 31x12x16.5, 33x10-16.5 33x10x16.5, 33x15.5-16.5 33x15.5x16.5 17.5 inch= 14-17.5 14x17.5 14.00-17.5 14.00x17.5 18 inch= 10.5-18 10.5x18, 12.0/75-18 12.0/75x18, 12.00-18 12.00x18, 12.5/80-18 12.5/80x18 12.5/80R18, 12.5-18 12.5x18 12.5R18, 335/80R18 19.5 inch= 15-19.5 15x19.5 15.00-19.5 15.00x19.5, 12.5-20 12.5x20 12.5R20, 14.5-20 14.5x20, 16/70-20 16/70x20 16/70R20, 365/80R20, 400/70R20, 405/70-20 405/70R20 22.5 inch= 18-22.5 18x22.5 24 inch= 13.00-24 13.00x24 13x24, 14.00-24 14.00x24 14x24, 16/70-24 16/70x24, 405/70R24, 500/70-24 500/70R24 25 inch= 15.5-25 15.5x25 15.5R25 - Other Services: v Offers wheel assembly services, providing convenience and ease of use for customers. v If you have another pneumatic tire size or vehicle model, please consult the APEXWAY team for a replacement. Welcome to contact us. APEXWAY. Tires that fit.
Ae-6000c-type flexible shaft crystal growth furnace is to melt silicon semiconductor materials by graphite resistance heater in an inert gas environment, using czochralski technique dislocation-free crystal growth equipment, it can produce high quality single crystal which for solar photovoltaic devices. Main technical parameters: Properties model ae-85 ae-95 ae-120 Diameter of growth tank (mm) 850 950 1200 Ingot diameter (inch) 6 - 8 8 - 10 8-16 Silica crucible size (inch) 18-20 22-24 24-28 Max charge amount (kg) 95 150 260 Max crystal length (mm) 2000 2000 2000 Seed pulling ratemm/hr 0-508 0-508 0-508 Seed jog speed (mm/min) 0-508 0-508 0-508 Seed rotation rate (rpm) 0-40 0-40 0-40 Crucible elevate rate (mm/hr) 0-128 0-128 0-128 Crucible jog speed (mm/min) 0-50.8 0-50.8 0-50.8 Crucible rotation rate (rpm) 0-20 0-20 0-20 Crucible travel stroke (mm) 400 420 480 Maximum weight for Crucible support (kg) 165 230 450 Main line pump rate (sl/sec) 70 70 150 Auxiliary pump rate (sl/sec) 8 8 8 Ultimate pressure (pa) less than 4 less than 4 less than 4 Permissible leak rate (pa/hr) less than 6 less than 6 less than 6 Gas flow control range (sl/min) 4-200 4-200 4-200 Working pressure range (pa) 1500-5000 1500-5000 1500-5000 Ac power input (3 phase, 380v) 140 kw 200 kw 250 kw Number of heating elements 1 2 2 Magnetic coil optional optional optional.
High Brightness Display 5.7 Inch E057QTZ-801 320x240 800 nits Viewing Angle : 80/80/70/70 Operating(C) : -30~85 Life Time : 50,000Hrs Interface : TTL 5.7 Inch E057TTZ-701 640x480 700 nits Viewing Angle : 80/80/70/70 Operating(C) : -30~85 Life Time : 50,000Hrs Interface : TTL 6.5 Inch E065TTZ-801 640x480 800 nits Viewing Angle : 80/80/70/70 Operating(C) : -30~80 Life Time : 50,000Hrs Interface : LVDS 8.4 Inch E084STN-A01 800x600 1,000 nits Viewing Angle : 80/80/80/60 Operating(C) : -20~70 Life Time : 50,000Hrs Interface : LVDS 10.1 Inch E101WVZ-A02 1280x800 1,000 nits Viewing Angle : 85/85/85/85 Operating(C) : -20~60 Life Time : 50,000Hrs Interface : LVDS 10.4 Inch E104GTN-A01 1024x768 1,000 nits Viewing Angle : 75/75/75/75 Operating(C) : -20~70 Life Time : 50,000Hrs Interface : LVDS 11.6 Inch E116HVZ-501 1920x1080 570 nits Viewing Angle : 85/85/85/85 Operating(C) : 0~50 Life Time : 15,000Hrs Interface : eDP 12.1 Inch E121GVN-A01 1024x768 1,000 nits Viewing Angle : 80/80/80/80 Operating(C) : -20~70 Life Time : 50,000Hrs Interface : LVDS 13.3 Inch E133HVN-801 1920x1080 800 nits Viewing Angle : 85/85/85/85 Operating(C) : 0~50 Life Time : 30,000Hrs Interface : eDP 15 Inch E150GTZ-G01 1024x768 1,600 nits Viewing Angle : 80/80/70/80 Operating(C) : -30~70 Life Time : 50,000Hrs Interface : LVDS 15 Inch E150GVN-A01 1024x768 1,000 nits Viewing Angle : 88/88/88/88 Operating(C) : -20~70 Life Time : 50,000Hrs Interface : LVDS 15.6 Inch E156HVN-701 1920x1080 700 nits Viewing Angle : 85/85/85/85 Operating(C) : 0~50 Life Time : 30,000Hrs Interface : eDP 17 Inch E170ETN-A01 1280x1024 1,000 nits Viewing Angle : 85/85/80/80 Operating(C) : 0~50 Life Time : 50,000Hrs Interface : LVDS 17 Inch E170ETZ-801 1280x1024 800 nits Viewing Angle : 80/80/70/70 Operating(C) : -30~85 Life Time : 30,000Hrs Interface : LVDS 18.5 Inch E185HVN-A01 1920x1080 1,000 nits Viewing Angle : 89/89/89/89 Operating(C) : -20~70 Life Time : 50,000Hrs Interface : LVDS 19 Inch E190ETN-A01 1280x1024 1,000 nits Viewing Angle : 85/85/80/80 Operating(C) : 0~50 Life Time : 50,000Hrs Interface : LVDS 21.5 Inch E215HVN-A02 1920x1080 1,000 nits Viewing Angle : 89/89/89/89 Operating(C) : 0~50 Life Time : 50,000Hrs Interface : LVDS 27 Inch E270HVZ-701 1920x1080 725 nits Viewing Angle : 89/89/89/89 Operating(C) : 0~50 Life Time : 30,000Hrs Interface : LVDS
APEXWAY has been one of the leading tire manufacturers and exporters in Taiwan since 1975. With in-house capability of design, testing and production. We are able to supply Solid Tires, Solid Cushion Tires for aerial work platform, Boom Lift, Aerial Lift equipments made in Taiwan. - Application: Aerial Work Platform (AWP), Manlift, Aerial Lift, Telescopic Boom, Articulating Boom, Boom Lift. - Aerial Work Platform Solid Tire Size: 8 inch= 4.00-8, 12x4x8, 12x4 1/2x8, 12x4.5x8, 16x6-8, 150/75-8 9 inch= 12x4.50, 306x115x237 10.5 inch= 16x5x10 1/2, 16x5x10.5 12 inch= 18x7x12 1/8, 18x7x12.125, 23x8.5-12, 23x10-12, 250/60-12, 27x10-12, 250/75-12 15 inch= 15x5, 381x127, 27x12-15, 8.25-15, 250-15, 250/70-15, 300-15, 315/70-15 16 inch= 7.50-16, 195/95-16, 8.25-16, 205/95-16, 16x5, 406x127, 22x8x16, 559x203x406, 22x9x16, 30x8.5-16, 30x10-16, 31x10.5-16, 32.5x15-16, 33x12-16 17.75 inch= 22x7x17 3/4 22x7x17.75 18 inch= 30x10-18 30x10x18, 31x10.5-18 31x10.5x18 20 inch= 30x10-20, 31x10.5-20, 32x10-20, 33x12-20, 36.5x12-20, 36.5x14-20, 38.5x14-20, 9.00-20, 15.00-20, 18.00-20, 385/70-20, 445/65-20 23 inch= 23 1/2x7 1/2, 23.5x7.5 24 inch= 385/65-24, 445/65-24 - The following inflatable tire sizes can be replaced with APEX solid tires: 18 inch= 30x10-18 30x10x18, 31x10.5-18 31x10.5x18 20 inch= 30x10-20 30x10x20, 31x10.5-20 31x10.5x20, 32x10-20 32x10x20, 33x12-20 33x12x20, 36.5x12-20 36.5x12x20, 36.5x14-20 36.5x14x20, 15.00-20 15.00x20, 38.5x14-20 38.5x14x20, 9.00-20 9.00x20, 385/70-20 385/70x20, 445/65-20 445/65x20, 18.00-20 18.00x20 23.5 inch= 23 1/2x7 1/2 23.5x7.5 24 inch= 385/65-24 385/65x24, 445/65-24 445/65x24 - Application by Brand Vehicle: Airo, Genie, Grove, Haulotte, JLG, Manitou, MEC, Nifty, Scanlift, Skyjack, Snorkel Welcome to contact us. APEXWAY. Tires that fit.
