1. High-quality heat source Under common-pressure liquid, the oil transfer heating system can output hot oil of maximum 350 fª for the heat user; Our heat-conducting oil heating systems applied the Fuji temperature control instrument and the intelligent self-tuning temperature control technology. The control precision is about f+ 1 fª and accurately control in the range of the used temperature; the main power for the heating used the solid-state modules non-contact switch circuit in order to adapt to the frequent switching and have no interference to the power supply. Dry combustion can also be avoided. The hot oil cooling system can be designed according to the end userf+s requirement, so that it can satisfy the process requirement of rapid cooling after heating up; 2. To save energy and low operating costs Heat-conducting oil heating system is the liquid phase closed cycle. The temperature difference between the output oil temperature and the return oil temperature is 20-30 fª, that is only to heat a temperature difference of 20-30 fª can the working temperature be reached. Meanwhile, no water treatment equipment is required for this device. No lose of steam runningf= steam reekingf=steam dropping and steam leakage as the steam boiler. The utilization ratio of heat is very high. It can save about 30% energy compared with the steam boiler. 3. Low Equipment Investment Due to the reason that the system of the heat-conducting is simplef=no water treatment equipment and more auxiliary equipmentf=low pressure bore by the boilers etc., the investment for the whole system is comparatively low; 4. Safety Because the system only withstands the pump pressure and there is no explosion risk for the heat conduction oil heating system, it is more secured; 5. Environmental Protection The environmental effect of the organic heat carrier heating system is mainly reflected in the minimal fume emissions, no sewage pollution and no thermal pollution; 6. Widely Application It can be applied in the following areas: by high-temperature shapingf= plate heatingf= rubberf= dryingf= dyeing and printingf= chemical industryf= plywood productionf=rolled water-proof material productionf= asphalt heatingf=non-woven hot-rolled machine, fiber glass press machinef= reaction kettlef= mould f=drying roomf= oven and other heating required industries. In wooden cases
Dongfang Yoyik Engineering Co., Ltd is specialized in producing, manufacturing and selling industrial spare parts, as well as providing products of famous brands. Since 1989, our products have being widely used in various industries from power, oil, chemical, electronic, gas to environmental protection, fire-fighting equipments and nuke industry. impeller for stator cooling water pump DFB100-65-260 Filter Element MSL-125 Leaf Spring 1DQ22 oil sourceof main oil pump outlet filter DP602EA03V/-W Sealant 750-2 Cables for probes GJCL-15 LVDT Position Sensor DET-400A rinse filter DP2B01EA01V/F LVDT Position Sensor DET-300A the jacking oil inlet filter DQ6803GA20H1.5C Filter w.38.C.0096 LVDT Position Sensor DET-150B Solenoid Valve GS061600V O Ring C8689553 impeller for stator cooling water pump DFB100-65-260 Pressure Switch ST307-V2-350-B Speed Card DFCS001 Solenoid Valve D1VW20BVZP92XB510 OPC Solenoid Valve AM501-1-0149 LVDT Position Sensor DET-600B oil motive cartridge filters DP201EA03V/W Filter Element V4051V3C03 LVDT Position Sensor DET-1000A filter element DR405EA03V/-W impeller for stator cooling water pump DFB100-65-260 work filter DP2B01EA10V/W impeller for stator cooling water pump DFB100-65-260 Water And Electricity And He Brush SX00 OPC Solenoid Valve Z2804076 impeller for stator cooling water pump DFB100-65-260 DFCL-2016-11-16-A
Zhejiang Yingtai Insulation Material Co., Ltd. is a manufacturer mainly producing epoxy glass fiber winding pipes. It has a complete set of manufacturing process line equipment and machinery. Our products are all customized products. Various specifications can be customized according to customer requirements. Various types of epoxy glass fiber wound pipe.    Epoxy glass fiber winding pipe is made by uninterrupted fiber wet winding. It is specially developed for high-voltage electrical equipment structural components such as reactors, arresters, fuses, transformers, on-load tap-changers, and transformers. The product performance parameters meet IEC standards Requirements, the product is leading in China. Basic parameters: 1: winding angle, 45 65 (the winding angle can be adjusted according to different requirements to achieve better mechanical performance requirements); 2: fiber content (weight ratio), 70 to 75%; 3: density, 2.00 g / cm3; 4: water absorption, less than 0.03%; 5: Axial thermal expansion coefficient, 1.8 E-05 1 / K; 6: Glass transition temperature, 110 120 ; 7: Chemical resistance Mineral oil: Excellent; 8: solvent and dilute acid: excellent; 9: tensile elastic modulus, 14000 MPa in the axial direction; 10: tensile strength; axial 280 MPa; hoop 600 MPa; 11: Shear strength: 150 MPa; 12: Bending strength: 350 MPa in the axial direction; 13: Compressive strength: 240 MPa in the axial direction; 14: relative dielectric constant 2-3.2; 15: Dielectric loss factor 0.003-0.015; 16: partial discharge â?¤5; 17: Insulation strength: 3 to 6 kV in the axial direction; 10 to 12 kV in the radial direction; 18: Lightning shock: 110 KV 19: Power frequency shock: 50 KV; 20: Heat-resistant grade: B, F, H 21: inner diameter> 5mm; outer diameter
Appropriate for pumping clear water or lightly contaminated water. Used to flood to flood control and drainage farmland irrigation, water supply projects, etc. Power: 22 to 500 kw Discharge: 500 to 20000 m3/h Head: 1.5 to 15 m (3.6- 54 feet) Pump outlet diameter: 350 to 1400mm (13.7 to 55.1 inch) Dia. Of impeller: 267 to 1540mm (10.5 to 60.6 inch) Rotate speed: 485 to 1450 r/min Angle of impeller installation: from -6 deg. To +6 deg. Ph value: 6, 9 Operating limits: Maximum ambient temperature 50 deg. C Motor: 1. Rewindable, dry-type, whole sealing and three-phase asynchronous motor 2. Insulation grade: f 3. Protection grade: ip68 4. Double/triple mechanical sealing 5. Equipped with special control cabinet 6. Voltage: 380-10000v 7. Frequency: 50; 60hz Materials: 1. Pump body: cast iron 2. Impeller: stainless steel 3. Shaft with rotor: 45 steel Advantages: 1)the integration of pump body and motor without other assembly process 2)saving price 30 to 40% comparing with the ground sewage pump station with the civil and structural engineering. 3)lower noise and underground pump station. 4)easy, reliable and steady operation, realizing remote control. 5)greater weight for same bulk 6)completely meeting power standard by testing
DE-103 AUTOCLAVE VERTICAL (SUPPLIED WITH S.S. BASKET) DELUXE MODEL ALTIS MAKE. Specification- It is used for sterilization under saturated steam pressure at any selected point between 10 to 20 p.s.i. (adjustable). These are double walled units with inner chamber (Boiler) made of 18 S.W.G. stainless steel and outer chamber is covered with S.S Lid is tightened by Radial locking system. Fitted with neoprene rubber gasket. All systems are hydraulically tested upto 40 p.s.i., as a safety measure. All autoclaves are fitted with standard accessories such as water level indicator, pressure gauge, steam release cock, spring loaded safety valve and heating element. Supplied complete with S.S basket, cord and plug to work on 220/230 volts A.C. Supply. ALL DELUXE MODELS besides being fitted with STAINLESS STEEL / GUNMENTEL LID and having inner chamber made of S.S and outer chamber covered with stainless steel, are also fitted with VACUUM BREAKER as a SAFETY DEVICE. DIA x HEIGHT LOAD CAPACITY (a) 250 x 450 mm 1.5 kw 22 ltrs. (b) 300 x 500 mm 2.0 kw 36 ltrs. (c) 350 x 550 mm 3.0 kw 50 ltrs. (d) 400 x 600 mm 4.0 kw 85 ltrs. (e) 450 x 600 mm 4.0 kw 98 ltrs. (f) 550 x 750 mm 5.0 kw 152 ltrs.
Appropriate for pumping clear water or lightly contaminated water. Used to flood to flood control and drainage farmland irrigation, water supply projects, etc. Power: 22 to 500 kw Discharge: 500 to 20000 m3/h Head: 1.5 to 15 m (3.6- 54 feet) Pump outlet diameter: 350 to 1400mm (13.7 to 55.1 inch) Dia. Of impeller: 267 to 1540mm (10.5 to 60.6 inch) Rotate speed: 485 to 1450 r/min Angle of impeller installation: from -6 deg. To +6 deg. Ph value: 6, 9 Operating limits: Maximum ambient temperature 50 deg. C Motor: 1. Rewindable, dry-type, whole sealing and three-phase asynchronous motor 2. Insulation grade: f 3. Protection grade: ip68 4. Double/triple mechanical sealing 5. Equipped with special control cabinet 6. Voltage: 380-10000v 7. Frequency: 50; 60hz Materials: 1. Pump body: cast iron 2. Impeller: stainless steel 3. Shaft with rotor: 45 steel Advantages: 1)the integration of pump body and motor without other assembly process 2)saving price 30 to 40% comparing with the ground sewage pump station with the civil and structural engineering. 3)lower noise and underground pump station. 4)easy, reliable and steady operation, realizing remote control. 5)greater weight for same bulk 6)completely meeting power standard by testing
Appropriate for pumping clear water or lightly contaminated water. Used to flood to flood control and drainage farmland irrigation, water supply projects, etc. Power: 22 to 500 kw Discharge: 500 to 20000 m3/h Head: 1.5 to 15 m (3.6- 54 feet) Pump outlet diameter: 350 to 1400mm (13.7 to 55.1 inch) Dia. Of impeller: 267 to 1540mm (10.5 to 60.6 inch) Rotate speed: 485 to 1450 r/min Angle of impeller installation: from -6 deg. To +6 deg. Ph value: 6, 9 Operating limits: Maximum ambient temperature 50 deg. C Motor: 1. Rewindable, dry-type, whole sealing and three-phase asynchronous motor 2. Insulation grade: f 3. Protection grade: ip68 4. Double/triple mechanical sealing 5. Equipped with special control cabinet 6. Voltage: 380-10000v 7. Frequency: 50; 60hz Materials: 1. Pump body: cast iron 2. Impeller: stainless steel 3. Shaft with rotor: 45 steel Advantages: 1)the integration of pump body and motor without other assembly process 2)saving price 30 to 40% comparing with the ground sewage pump station with the civil and structural engineering. 3)lower noise and underground pump station. 4)easy, reliable and steady operation, realizing remote control. 5)greater weight for same bulk 6)completely meeting power standard by testing
The Dreambox 500C is the smallest digital Linux SetTopBox based receiver with card sharing function. - 250 MHz IBM PowerPC Processor (350 Mips) - Linux Operating System - 1 x Smartcard-Reader - MPEG2 Hardware decoding - Common available NIMs (DVB-S, DVB-C) - V.24/RS232 Interface - 2 LED status - Unlimited channel lists for TV/Radio - Channel-change time < 1 second - Full automatic service scan - Supports directly bouquet-lists (indirect unlimited) - Supports EPG (electronic program guide) - Supports multiple LNB-Switching control (supports DiSEqC) - Fully adaptable OSD in many languages (skin-support) - SPDI/F Interface for digital bit stream out (AC-3 / DTS) - 1 x Scart-interfaces (fully controlled by software) DBS-Tuner: Input Symbol rate 2 .. 45 Mbaud/s, SCPC / MCPC FEC Viterbi and Reed-Solomon Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation Roll-off Factor 35 % Demultiplexing according ISO 13818-1 Video decoder: Video Compression MPEG-2 and MPEG-1 compatible Video Standard PAL G/ 25 Hz Video Formats 4:3 / 16:9 Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart) Letterbox precolating for 4:3 TV-Device Audio decoder: Audiokompression MPEG-1 & MPEG-2 Layer I and II Audio Mode Dual (main/sub), Stereo Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz Output analog: Output Level L/R 0,5 Vss o-n 600 Ohm THD > 60 dB (1 kHz) Crosstalk < -65 dB Output digital: Output Level 0,5 Vss o-n 75 Ohm Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz S/PDIF-Output optical (AC3).
Material: 100% European/Chinese/Indian/Brazilian/Malaysian virgin/Remy human hair/Russian hair, Ukrainian hair, Bohemian hair,Mongolian Hair Type: Machine made weft;Hand made weft;Clip in hair or Clip on hair;Skin weft hair;PU tape weft;Glue tape hair;Nail hair (U tip/V tip/ flate), Stick hair Hair Grade: Grade A++/A+/A/B/C Length: 8 inches ¨C 32 inches Weight: 50g/70g/80g/100g/110g/120g/160g¡or made according to your requirements Hair Texture: Silky straight, Body wave, Jerry , Water, Yaki, New Deep wave, Super wave,Light curl, Deep Curl, Loose curl,Afro curl, Super bulk, Braiding, Fringe¡etc. Hair Color: Dark color: #1, #1B, #2, #4, #6, #8, #27, #33, #99J Light color:#3,#5, #7,#10, #12, #14, #16,#18, #20, #22, #24, #30, #144, #350, #613, #60, BUG etc. Fancy color: pink, orange, blue, green, yellow, red, purple etc. Other color: T(Two tones) color, F (frost) color, M (mixed) color Hair quality: No shedding, fade and tangle free. Soft, clean, beautiful, top quality and fast delivery Packing Inner packing: plastic bag with hang tag. Outer packing: carton Minimum order Human Hair extension : 100pcs Synthetic hair extension: 1000pcs Human hair Wig : 5pcs Synthetic wig : 100pcs Delivery Time 5 Working days after receipt of payment, we can also do drop shipping. Team of payment Western Union, Money gram, Paypal, T/T or L/C Shipment: By air or express ; by sea for large bulk order. Stander packing , or packing as your requirement.
The SCM2 series are with two back to back impellers, it is use for high head values but if hard to reach with single impeller centrifuagl pump. Suitable for civil and industrial uses to pump clean water and chemically non-aggressive liquid. Particularly be used for increasing the supply pressure, feeding boilers and loading extremely. These pumps should be installed in a covered area, protected against the weather. Pump body: Cast iron Impeller: Brass Motor: Closed, externally ventilated Insulation class: B(Class F if required) Protection class: IP44/IP54 Duty: Continuously rated Mechanical seal: 16, 18, 25 ceramic steatite/metalized carbon Type: SCM2-32 Power: 0.75HP Q. Max: 90l/min H. Max: 30m L*W*H: 380*210*240(mm) Type: SCM2-40 Power: 1HP Q. Max: 100l/min H. Max: 35m L*W*H: 380*210*240(mm) Type: SCM2-52 Power: 1.5HP Q. Max: 130l/min H. Max: 48m L*W*H: 415*255*320(mm) Type: SCM2-60 Power: 2HP Q. Max: 140l/min H. Max: 52m L*W*H: 415*255*320(mm). Type: SCM2-68 Power: 3HP Q. Max: 200l/min H. Max: 60m L*W*H: 480*290*350(mm) HS Code: 841381 Trademark: Haitai pump or OEM Standard: CE, GS Productivity: 50000PCS/Month Unit Price/Payment: T/T Origin: China Packing: 1PCS in 1 Box Min. Order: 300 PCS Transportation: by Sea Theory: Jet Pump Structure: Single-stage Pump Power: Electric Type: Jet Pump Export Markets: North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe.
RG6 Coaxial Cable: 1.02CCS/BC+4.57mm Foamed PE+Bonded AL-Foil+0.12mm*80 AL-Mg alloy Braiding+6.9mmPVC Specification : Inner conductor:1.02BC/CCS Dielectric:4.57mm Foamed PE AL-Foil:Bonded AL-Foil;Ordinary AL- Foil, Double-Sided AL- Foil, Single-Sided AL-Foil Braided material: cu;AL-Mg alloy;Copper Clad Aluminum Braided diameter:0.12mm;0.13mm;0.14mm;0.15mm..... Braided net:64;80;96;112.... Braided coverage:50%;60%;70%;80% Jacket:6.8mmPVC ;6.9mmPVC. Characteristics: Impedance:75¡À3.0hms Capacitance(pF/m) :54¡À3.0 Nominal Velocity of Propagation: 85% Return loss(¡ÝdB) : VHF 5-300MHz ¡Ý20dB UHF 300-960MHz¡Ý18dB. Attenuation [@68¡ã F.(20¡ãC.)]: Frequency (MHz) Maximum(dB/100m) 5 1.90 55 5.25 83 6.40 187 9.35 211 10.00 250 10.82 300 11.64 350 12.63 400 13.61 450 14.43 500 15.09 550 16.08 600 16.73 750 18.54 865 20.01 1000 21.49 Applications: 1)CATV-community antenna television 2)CCTV-closed-circuit television 3)DBS-direct broadcasting satellite. 1.Client's specification and designation are welcome. 2.Don't hesitate to contact us! Inquiries and visits are more than welcome. 1)100m/roll,200m/roll,305m/roll 100yard/roll,200yard/roll,300yard/roll (other lengths available client's request) 2)Inner packing:Wooden reel,plastic reel and paper reel available 3)Outer packing:Carton box,pull out box,pallet available (other packing available according to client's request).
Flange We possess immense expertise in the dealing of a wide gamut of steel flanges that are constructed to precision at our vendors end. Highly acclaimed by our global clients for their qualitative features of durability and strength, these flanges find diverse application in several industry verticals. Form: Socket Weld¡¢Slip on£¬Blind£¬Lapped£¬Screwed£¬Weld Neck£¬Long Weld Neck£¬Reducing£¬ ¡¤ Spectacle¡¢Ring Joint Pressure rating: class 150LBS¡¢300LBS¡¢400LBS¡¢600LBS¡¢900LBS¡¢1500LBS¡¢2500LBS Dimensions: ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48, API 605, AWWA AND DRAWING Metrial£º CS Standard: ASTM / ASME A/SA 105 / 350 LF 2 ¡¤ SS Standards: ASTM / ASME A/SA 182 Steel Grade: F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L. ¡¤ AS Standard: ASTM / ASME A/SA 182 ASTM A182 F1, F11, F12, F22, F5, F9, F91. ¡¤ Nickel Alloy Standard: ASTM / ASME SB 564 / 160 / 472 Grade: UNS 2200 (NICKEL 200), UNS 4400 (MONEL 400), UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600), UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), UNS 2201 (NICKEL 201), (ALLOY 20 / 20 CB 3). Free fumigation plywood case or plywood pallet.
Digital satellite receiver Power digital receiver for satellite tv set: dm500-oem, it is the smallest digital linux settopbox. 250 mhz ibm powerpc processor (350 mips) 2 led status Linux operating system Full automatic service scan Supports directly bouquet-lists (indirect unlimited) Supports multiple lnb-switching control (supports diseqc) 1 x smartcard-reader Unlimited channel lists for tv/radio Spdi/f nterface for digital bit stream out (ac-3 / dts) Mpeg2 hardware decoding Channel-change time < 1 second Fully adaptable osd in many languages (skin-support) 100mbit full duplex ethernet interface Supports epg (electronic program guide) 1 x scart-interfaces (fully controlled by software) Video decoder: Video compression mpeg-2 and mpeg-1 compatible Video standard pal and ntsc Video formats 4:3 / 16:9 Footage 16:9, automatic assimilation for 16:9 tv-device (over scart) Letterbox precolating for 4:3 tv-device audio decoder: Audiokompression mpeg-1 & mpeg-2 layer i and ii Audio mode dual (main/sub), stereo Frequency: 32 khz, 44.1 khz, 48 khz, 16 khz, 22.05 khz, 24 khz 6pcs/ctn 380mm x320mm x 360mm 12.5kgs/ctn
Elbow Our company is a large enterprise which produces and distributes pipe-fittings professionally in china. We have three subcompanies that are specialized in producing teejoint (three-way connecting block), flange, and bend. Our company lies in the beautiful and abundant international city - weifang, which is famous for its kite-making. There are many production lines in our company which can produce bend, flange, teejoint and other pipe-fittings. We are capable of producing all specifications of high-pressure, medium-pressure, and low-pressure pipe-fittings with carbon steel, stainless steel, and alloy steel according to the standards of iso, ansi, jis, din, gb, hg and so on. Material:carbon steel, stainless steel, and alloy steel (astm a-105, a 182 f-304/304l/316/316l/321 a-350-lf 1, lf2, lf3, a 182 f5, f7, f9, f11, f22, is2062, is1239, is3589 astm a 234. Wpa, wpb, wpc, wp1, wp5, wp7, wp11, wp12, wp22 a 420 wpl3, wpl6, a 403 wp 304/304l/316/316l/321/347, steam boiler class, plus major "exotic" materials i.E. Various grades nickel, monel, incoloy, hastelloy, inconel, cupronickel & titanium). Sizes: 1/2" nb to 4" nb. Forged (sw & screwed) various manufacturing std. & classes 1/2" nb to 24" nb seamless pipe fittings (bw) 1/2" nb to 72" nb welded bw (elbows & tees two halves & reducer with one seam longitudinal welded with 100% r.T.)
Tees Our company is a large enterprise which produces and distributes pipe-fittings professionally in china. We have three subcompanies that are specialized in producing teejoint (three-way connecting block), flange, and bend. Our company lies in the beautiful and abundant international city - weifang, which is famous for its kite-making. There are many production lines in our company which can produce bend, flange, teejoint and other pipe-fittings. We are capable of producing all specifications of high-pressure, medium-pressure, and low-pressure pipe-fittings with carbon steel, stainless steel, and alloy steel according to the standards of iso, ansi, jis, din, gb, hg and so on. Material:carbon steel, stainless steel, and alloy steel (astm a-105, a 182 f-304/304l/316/316l/321 a-350-lf 1, lf2, lf3, a 182 f5, f7, f9, f11, f22, is2062, is1239, is3589 astm a 234. Wpa, wpb, wpc, wp1, wp5, wp7, wp11, wp12, wp22 a 420 wpl3, wpl6, a 403 wp 304/304l/316/316l/321/347, steam boiler class, plus major "exotic" materials i.E. Various grades nickel, monel, incoloy, hastelloy, inconel, cupronickel & titanium). Sizes: 1/2" nb to 4" nb. Forged (sw & screwed) various manufacturing std. & classes 1/2" nb to 24" nb seamless pipe fittings (bw) 1/2" nb to 72" nb welded bw (elbows & tees two halves & reducer with one seam longitudinal welded with 100% r.T.)
Conred Our company is a large enterprise which produces and distributes pipe-fittings professionally in china. We have three subcompanies that are specialized in producing teejoint (three-way connecting block), flange, and bend. Our company lies in the beautiful and abundant international city - weifang, which is famous for its kite-making. There are many production lines in our company which can produce bend, flange, teejoint and other pipe-fittings. We are capable of producing all specifications of high-pressure, medium-pressure, and low-pressure pipe-fittings with carbon steel, stainless steel, and alloy steel according to the standards of iso, ansi, jis, din, gb, hg and so on. Material:carbon steel, stainless steel, and alloy steel (astm a-105, a 182 f-304/304l/316/316l/321 a-350-lf 1, lf2, lf3, a 182 f5, f7, f9, f11, f22, is2062, is1239, is3589 astm a 234. Wpa, wpb, wpc, wp1, wp5, wp7, wp11, wp12, wp22 a 420 wpl3, wpl6, a 403 wp 304/304l/316/316l/321/347, steam boiler class, plus major "exotic" materials i.E. Various grades nickel, monel, incoloy, hastelloy, inconel, cupronickel & titanium). Sizes: 1/2" nb to 4" nb. Forged (sw & screwed) various manufacturing std. & classes 1/2" nb to 24" nb seamless pipe fittings (bw) 1/2" nb to 72" nb welded bw (elbows & tees two halves & reducer with one seam longitudinal welded with 100% r.T.)
Reduer Our company is a large enterprise which produces and distributes pipe-fittings professionally in china. We have three subcompanies that are specialized in producing teejoint (three-way connecting block), flange, and bend. Our company lies in the beautiful and abundant international city - weifang, which is famous for its kite-making. There are many production lines in our company which can produce bend, flange, teejoint and other pipe-fittings. We are capable of producing all specifications of high-pressure, medium-pressure, and low-pressure pipe-fittings with carbon steel, stainless steel, and alloy steel according to the standards of iso, ansi, jis, din, gb, hg and so on. Material:carbon steel, stainless steel, and alloy steel (astm a-105, a 182 f-304/304l/316/316l/321 a-350-lf 1, lf2, lf3, a 182 f5, f7, f9, f11, f22, is2062, is1239, is3589 astm a 234. Wpa, wpb, wpc, wp1, wp5, wp7, wp11, wp12, wp22 a 420 wpl3, wpl6, a 403 wp 304/304l/316/316l/321/347, steam boiler class, plus major "exotic" materials i.E. Various grades nickel, monel, incoloy, hastelloy, inconel, cupronickel & titanium). Sizes: 1/2" nb to 4" nb. Forged (sw & screwed) various manufacturing std. & classes 1/2" nb to 24" nb seamless pipe fittings (bw) 1/2" nb to 72" nb welded bw (elbows & tees two halves & reducer with one seam longitudinal welded with 100% r.T.)
We supply undercarriage parts for all CAT excavators. CAT 320 L C-FMLY undercarriage parts CAT 320 L ME undercarriage parts CAT 320C L UTILITY undercarriage parts CAT 320C MH undercarriage parts CAT 320D LRR undercarriage parts CAT 321B LCR undercarriage parts CAT 321C LCR undercarriage parts CAT 321D LCR undercarriage parts CAT 322 B-FMLY undercarriage parts CAT 322 D-FMLY undercarriage parts CAT 25B C-FMLY undercarriage parts CAT 325B L C-FMLY undercarriage parts CAT 325B L ME undercarriage parts CAT 325B LN undercarriage parts CAT 330 L ME undercarriage parts CAT 330 ME undercarriage parts CAT 330B D-FMLY undercarriage parts CAT 345C UHD undercarriage parts CAT 345D L undercarriage parts CAT 350 F-FMLY undercarriage parts CAT 350 G-FMLY undercarriage parts CAT 365B L ME undercarriage parts CAT 365B L V-FMLY undercarriage parts CAT 365C L undercarriage parts CAT 365C L ME undercarriage parts CAT 365C UHD undercarriage parts CAT 375 H-FMLY undercarriage parts CAT 375 J-FMLY undercarriage parts CAT 375 L H-FMLY undercarriage parts CAT 385B MASS undercarriage parts CAT 385B REACH undercarriage parts CAT 385C undercarriage parts CAT 385C L undercarriage parts etc. The undercarriage parts provided for CAT excavators include: CAT excavator track shoes/pads CAT excavator track chains/link assy. CAT excavator track/front idlers CAT excavator track/bottom rollers CAT excavator carrier rollers CAT excavator driving sprockets CAT excavator bolts and nuts CAT excavator tension springs A&S Complete Supply Range for undercarriage parts CAT excavator/bulldozer undercarriage parts DAEWOO excavator undercarriage parts HITACHI excavator/bulldozer undercarriage parts HYUNDAI excavator/bulldozer undercarriage parts JCB excavator undercarriage parts KATO excavator undercarriage parts KOBELCO excavator/bulldozer undercarriage parts KOMATSU excavator undercarriage parts LIEBHERR excavator undercarriage parts O&K excavator undercarriage parts TEREX excavator undercarriage parts VOLVO excavator undercarriage parts SUMITOMO excavator undercarriage parts MITSUBISHI excavator undercarriage parts JOHN DEERE excavator undercarriage parts YANMAR excavator undercarriage parts KUBOTA excavator undercarriage parts TAKEUCHI excavator undercarriage parts SANY excavator undercarriage parts ZOOMLION excavator/bulldozer undercarriage parts LIUGONG excavator undercarriage parts XCMG excavator undercarriage parts LONKING excavator undercarriage parts YUCHAI excavator undercarriage parts CHANGLIN excavator undercarriage parts SHANTUI excavator undercarriage parts
100% remy human hair weaving Hair weaving, hair weave, hair weaving, human hair weaving, remy human hair, hair extensions, remy human hair material, human hair, hair weft, hair weave, made of 100% cuticle remy human hair. Hair weave, it is completely made by hand and it will be very strong and elegant. 1. Composition: 100% natural Human Hair. 2. Length: 8 "- 30" is available. 3. Color Categories: Dark color: #1, #1B, #2, #4, #6, #8, #27, #30, #33 Light Color: #10, #12, #14, #16, #18, #22, #24, #34, #44, #51, #280, #99J, #144, #118, #130, #18/22, #350, #530, #750, #850, #613, #Blue, #Pink, #Purple, #Red, #Yellow, #Orange, #Violet, #Green, #Burgundy And all kinds of Side by Side color (F color), Piano color (P Color), Two Tone color (T color), Mix color according to your requirements. It is no problem to fulfill your order according to your own color ring. 4. Package: PVC Bag and Label is available. The beautiful bag can be hang on exhibition. OEM is available. 5. Usual weight: 50 grams/each piece, 80 grams/each piece, 100 grams/each piece. Our Hair Products: 1. Human hair products: Pre bonded hair extensions (U-tip, V-tip and I-tip), clips on hair extensions, easy loop hair extensions, human hair weave, human hair weave with micro ring attached (EZ weft), skin weft, hand-tied hair weave, full lace wigs, toupees and machine made human hair wigs and so on. 2. Synthetic hair products: Jumbo braids, synthetic hair weave, synthetic hair pieces, synthetic hair wigs and so on. 3. Training head and Mannequin head. 4. Hair extension tools: Micro ring, copper ring, shrinkable tube, pulling needle, thread needle, adhesive tape, snap clip, section clip, extension brush, fusion connector, glue nail tips, finger protector, PVC protector, PVC organizer, glue stick, glue gun, glue grains, glue hotpot, hair comb, drawing mat, weave thread, weave needle, bond remover and so on. 100grams.
Each other fully, with the long life span, excellent stability and high precision. 4.Converse installation: A.The structure is the same as the single way installation, which can control the lower gear precisely and long time Using can't cause it reverses; with extremely high stability and precision. B.Inaccurate feeding distance and the brake failure caused by the grease splashed during impact are impossible. C.High heat is hard to produce. D.Adopt the super hard alloy and roller; uneasy to be wore out. E.Roller runs in circle and the stuck can not be caused easily. F.Low friction, the rotation torque is reduced and the rotating mechanism can not be damaged easily. G.The converse installation speed reaches 30 meters/minute, and normally it is 20 meters/minute, which increase 50%. H.Special structure prolonged the lifespan Model Roller width Feeding length(mm) Material thickness (mm) Material line Height (mm) Press capacity Size Weight A B C D E F G M Lh-105ns 100 50 0-1.6 55-100 5-20 537 247 250 292 200 95 295 120 64 Lh-205ns 200 50 0-1.6 55-100 20 637 347 270 342 220 125 345 120 87 Lh-255ns 250 50 0-1.6 55-100 20 687 397 270 367 220 125 345 120 95 Lh-305ns 300 50 0-1.6 55-100 40 737 447 270 392 220 125 345 120 103 Lh-355ns 350 50 0-1.6 55-100 40 787 497 270 417 220 125 345 120 111 Lh-405ns 400 50 0-1.6 55-100 60 837 547 270 442 220 125 345 120 121 Lh-455ns 450 50 0-1.6 55-100 80 887 597 270 467 220 125 345 120 101 Lh-505ns 500 50 0-1.6 55-100 80 937 647 310 492 220 125 345 120 141 Lh-555ns 550 50 0-1.6 55-100 110 987 697 410 517 220 125 345 120