The following example is for you reference: 1.Description: DDZ series elevators are center latch elevators with 18 degree taper shoulder,applied in handling the drill pipes and drilling tools,etc.the load ranges from 100 tons to 750 tons and the size ranges from 2 3/8" to 6 5/8".It was design verification tested at more than two times the max,test load, and underwent ex-factory test at one and a half times the rated load.the products shall be designed and manufactured according to the requirements in API Spec 8A/8C Specification for drilling and production hoisting equipment. 2.Features: (1).Centralizer type elevator easy to operation. (2).100% NDT test, hydraulic test, Load capacity test according to API 8C. (3).Wear limit form provided for spare parts. (4).Load capacity from 100-750tons. (5).Short on deliver time. 3.Key Words: DDZ drilling elevator, Centralized elevator, Well drilling elevator. 4.After-sales Service Provided: No overseas service provided. 5.Warranty: one year. 6.Certificaiton: API 8A/8C. 7.Condition: New. 8.Color: Red. 9.Model: DDZ-100; DDZ-150; DDZ-250; DDZ-350; DDZ-350TD; DDZ-500; DDZ-500TD; DDZ-750. 10.Rated Capacity(short tons): 100~750. 11.Size(in): 2 3/8"~6 5/8". 12.Place of Origion: China(Mainland). 13.Minimun Order: 1Set(s). 14.Material: Carbon Steel. 15.Processing Type: Forging. 16.Machine Type: Drilling Equipment. 17.Use: Well Drilling. 18.Processing Time: 20days. 19.Supply Ability: 400sets/per month. 20.Payment Terms: T/T; L/C; Western Union. 21.Packing&Delivery: (1).Packing Details:Standard Export Package. (2).Port:China Main Port.
1. Main Technical Parameters: (1). Model: WT 4 1/2-6. Drill Collar O.D. (in): 4 1/2-6. Drill Collar O.D. (mm): 114.3-152.4. Weight (kg): 49. Weight (lb): 108. Use in Insert Bowl No.: API or No. 3. Max Load: 40 short tons. (2). Model: WT 5 1/2-7. Drill Collar O.D. (in): 5 1/2-7. Drill Collar O.D. (mm): 139.7-177.8. Weight (kg): 46. Weight (lb): 101. Use in Insert Bowl No.: API or No. 3. Max Load: 40 short tons. (3). Model: WT 6 3/4-8 1/4. Drill Collar O.D. (in): 6 3/4-8 1/4. Drill Collar O.D. (mm): 171.4-209.6. Weight (kg): 42. Weight (lb): 92. Use in Insert Bowl No.: API or No. 3. Max Load: 40 short tons. (4). Model: WT 8-9 1/2. Drill Collar O.D. (in): 8-9 1/2. Drill Collar O.D. (mm): 203.2-241.3. Weight (kg): 39. Weight (lb): 86. Use in Insert Bowl No.: API or No. 3. Max Load: 40 short tons. 2. Product Description: Drill Collar Slips are specially developed to handle drill collars during well drilling. Drill Collar Slips Type WT can accommodate drill collars from 4 1/2 in (114.3 mm) to 9 1/2 in (241.3 mm) O.D.. They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment. 3. Features: (1). Multi-segments design make it possible to handle different size drill collars by adjusting the quantity of inserts or slip body. (2). 100% customer satisfaction for quality and reliability. (3). After machining all slips undergo 100% inspection. (4). Different types for clients choice for different depth well and different size drill pipe. 4. Material: Carbon Steel. 5. Processing Type: Forging. 6. Machine Type: Drilling Equipment. 7. Use: Well Drilling. 8. FAQ: Why you need to choose Lake Petro? As a professional oil and gas service company, Lake Petro has many good experience in selling and serves for the oilfield industries for years. Quality is the culture of the company, we provide API and BV certified products for customer. Can you make us the best quality products as well as a good price? Yes, we can give you really high quality products with competitive price. We have a better understanding in Chinese market, with us your money will be safe. What is special compare with other companies? First, we provide the quality products, with BV and API certified; At the same time, we provide our customer with the best service after sale, any time any where.
Rongsheng F1600 Mud Pump Crosshead Product Description The crosshead supplied by Lake Petro is manufactured from high quality, cast steel and the guides are from a quality manganese bronze normally used in bearings. This combination of materials provides a low friction interface and generates very little heat, which indications no friction, which equates to no wear. Lake Petro has very rich experience in supplying spare parts of mud pump to the worldwide Oil Drilling industry.We stock and sell a wide selection of mud pump fluid end expendables and spares parts. Mud pump parts for F series mud pump, For P series mud pump, For PZ series mud pump, For 3NB series mud pump. These parts include liners, pistons, valves & seats,piston rods, rod clamps, extension rods, all fluid end seals and gaskets, fluid cylinder modules and accessories, as well as power end components, such as crankshaft assemblies, gear sets, connecting rods, crosshead, and bearings.
Cheaper crosshead for mud pump Product description The crosshead supplied by lake petro is manufactured from high quality, cast steel and the guides are from a quality manganese bronze normally used in bearings. This combination of materials provides a low friction interface and generates very little heat, which indications no friction, which equates to no wear. Lake petro has very rich experience in supplying spare parts of mud pump to the worldwide oil drilling industry.We stock and sell a wide selection of mud pump fluid end expendables and spares parts. Mud pump parts for f series mud pump, for p series mud pump, for pz series mud pump, for 3nb series mud pump. These parts include liners, pistons, valves & seats, piston rods, rod clamps, extension rods, all Fluid end seals and gaskets, fluid cylinder modules and accessories, as well as power end Components, such as crankshaft assemblies, gear sets, connecting rods, crosshead, and bearings.
1. Main Technical Parameters: (1). Model: DU. Size of Slip Bodies: 4 1/2". DP O.D. (in): 2 3/8"; 2 7/8"; 3 1/2"; 4"; 4 1/2". DP O.D. (mm): 60.3; 73.0; 88.9; 101.6; 114.3. (2). Model: DU. Size of Slip Bodies: 5 1/2". DP O.D. (in): 3 1/2"; 4"; 4 1/2"; 5"; 5 1/2". DP O.D. (mm): 88.9; 101.6; 114.3; 127; 139.7. (3). Model: DU. Size of Slip Bodies: 7". DP O.D. (in): 4 1/2"; 5"; 5 1/2"; 6 5/8"; 7". DP O.D. (mm): 114.3; 127; 139.7; 168.3; 177.8. (4). Model: DUL. Size of Slip Bodies: 4 1/2". DP O.D. (in): 2 3/8"; 2 7/8"; 3 1/2"; 4"; 4 1/2". DP O.D. (mm): 60.3; 73.0; 88.9; 101.6; 114.3. (5). Model: DUL. Size of Slip Bodies: 5 1/2". DP O.D. (in): 3 1/2"; 4"; 4 1/2"; 5"; 5 1/2". DP O.D. (mm): 88.9; 101.6; 114.3; 127; 139.7. (6). Model: DUL. Size of Slip Bodies: 7". DP O.D. (in): 4 1/2"; 5"; 5 1/2"; 6 5/8"; 7". DP O.D. (mm): 114.3; 127; 139.7; 168.3; 177.8. (7). Model: SDU. Size of Slip Bodies: 4 1/2". DP O.D. (in): -. DP O.D. (mm): -. (8). Model: SDU. Size of Slip Bodies: 5 1/2". DP O.D. (in): 3 1/2"; 4"; 4 1/2"; 5"; 5 1/2". DP O.D. (mm): 88.9; 101.6; 114.3; 127; 139.7. (9). Model: SDU. Size of Slip Bodies: 7". DP O.D. (in): 4 1/2"; 5"; 5 1/2"; 6 5/8"; 7". DP O.D. (mm): 114.3; 127; 139.7; 168.3; 177.8. 2. Product Description: Drill pipe slip is a kind of handling tools specially used to handle drill pipe during the oil well drilling operations for the exploration of petroleum and natural gas. It is an essential tool for coupling and uncoupling. There are three types of DU series Rotary Slips: DU, DUL and SDU. They are with large handling range and light weight. There into, SDU slips have larger contacting areas on the taper and higher resistance strength. They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment. 3. Features: (1). Suitable for shallow hole drilling, medium depth drilling and deep drilling. (2). 100% customer satisfaction for quality and reliability. (3). After machining all slips undergo 100% inspection. (4). Different types for clients choice for different depth well and different size drill pipe. 4. Material: Carbon Steel. 5. Processing Type: Casting. 6. Machine Type: Drilling Tool. 7. Use: Well Drilling.
CNC Deephole Drilling & Boring Machine is suitable for the drilling, boring and rolling processing of all kinds hydraulic oil cylinder, cylinder and other precision tube fittings, especially for the precision processing of step holes. The hole diameter accuracy of machined workpiece can be up to and over IT7~IT8, and the surface roughness reach Ra0.2~0.3 m. The bed adopts welding steel so that it is strong in rigidity. On the double flat guide way, it equipped the rolling linear guide way. So it has high move precision and high abrasion proof. The bed is also the cooling box, so it is strengthen the stability of bed and reduce the shake. It equipped the Germany SIEMENS 802D CNC system (or appoint by customer). It is AC motor for the headstock, tow grade and stepless. The bearing of spindle is high precision FAG bearing and it is strong in rigidity and high precision in rotating. The feeding box adopts AC servo motor, stepless, and it is equipped with high precision ball screw. It adopts the hydraulic elements which is stable in capability made in Taiwan (or appointed by customer). It adopt scraps discharging by spindle, it equipped automatic discharge scrap equipment and it is not leak. It can also equipped high efficiency automatic expand-draw back combined tools. It is an ideal machine for deephole processing with high precision and efficiency. Tsq 2180 CNC deep hole boring machine Range of drilling hole dia : 40- 100mm Range of boring hole dia : 40- 800mm Sleelve boring hole dia : 140- 400mm Max boring depth : 3-12m one sepcification every each one meter Center height from horizental rail to spindle center : 1000mm Headstock spindle hole dia : 100mm Front spindle taper hole : 120mm, 1:20 Spindle rotation speed , steps : 16-270r/min 12steps Main motor : 45kw Feeding speed : 5-500mm/min ac servo stepless Carriage rapid moving speed : 2m/min Clamping dia of workpiece : 120-800mm Drilling bar box spindle hole dia : 75mm Front spindle taper hole of drilling bar box : 85mm, 1:20. Drilling bar box motor : 30kw Spindle rotation speed , steps of drilling bar box : 82-490r/min 6steps Feeding motor : 7.5kw ac servo stepless Pulling plate fast motor : 5.5kw Cooling pump motor : 5.5kwx4 4groups Hydraulic pump motor : 1.5kw, n=1440r/min Rated pressure of cooling system : 2.5mpa Volume of cooling system : 100, 200, 300, 600, 900l/min. Wooden packing.
Packaging Details 1. Normal packing: plywood case, wooden box or pallet 2. Suitable for ocean shipping and air shipping. 3. Max. weight for each package: 1500 Kg 4. Special packing requirements should be known in advance. 5. Custom packing is available. Blowout preventer (BOP) BOP is shut in the well for oil testing, workover, well completion and operating process to prevent the blowout accident, totally enclosed and semi-closed two functions into one, has a simple structure, easy to operate, resistant to high-pressure characteristics is used to prevent blowouts safety oilfield sealing wellhead. Oil drilling, installed at the wellhead casing head, used to control the high pressure oil, gas, water blowout. Wells of oil and gas pressure is high, the BOP can be the wellhead closed (shut). The shutter has four, alternatively bullied invaded mud, increasing the pressure of the borehole fluid column, so as to suppress the high-pressure oil and gas discharged from the drill pipe is pressed into the heavy mud. Its type sub-ordinary blowout preventer, of universal blowout preventers and rotating blowout preventer. Ordinary BOP ram with full-and semi-closure, full closure type blowout preventer can seal the entire wellhead; semi-sealed shut wellhead annular cross-section of drill pipe exists. Universal BOP can start in case of emergency to cope with any size drill and empty wells. BOP parts that we supply all come from original manufacturers, they are 100% interchangeable. BOP part name: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell. Apply to below BOP: Brand: SK BOP. RS BOP ETC OTHER FAMOUS BRAND BOP Type: Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP Working pressure: 2000psi-15000psi(14 Mpa-105Mpa) Operating temperature: -18deg--121deg Bore size: 7 1/16-21 1/4 Top & nottom connection: Flanged,studded
Product features The rovolving speed is changeable during the machine is being operated. The gears are safe absolutely. The total maximum height is 570m/m. Design of motor and gear box makes the point gravity center become only 280m/m. As the center of gravity is quite low and hard to be fallen, the magentic foundation can attain its function and efficiency. The distributor disc is located on the top of machine which prevent it from being fallen or destroyed. Mtm-930a & mtm-922a with six-step speed variable (max. Revolving speed: 756min revoling speed:51) depends on the hardness of processed objects and size of hole which makes the operator more comfortable to select the revolving speed. Specifications Model mtm-922a mtm-930a mtm-940a Drill capacity 1/4"~7/8" 6° ~22° 1/4"~1-1/4" 6° ~32° 5/8"~1-1/2" 16° ~38° Tapping capacity 3/8"~7/8" 10 ° ~22° 3/8"~1-1/8" 10 ° ~30° 5/8"~1-1/2" 16 ° ~38° Power 220v 3-phase 220v 3-phase 220v 3-phase Hp 1-1/2 2 2-1/2 R.P.M. 756 456 303 186 127 51 756 456 303 186 127 51 686 404 268 165 165 97 65 38 Max depth 100 100 130 Body stroke 150 150 200 Transvers al move 20 20 20 Turning degree 330¦ 330¦ 330¦ Electro magretic 126x240 135x280 155x280 Electro magretic force 2000kgs 2500kgs 3000kgs Height 570 580 730 Torsion fixture standard fitting 5 7 8 Drill sleeve standard fitting 2 3 3 Fittings weight 5 7 16 Machine weight 60 70 100 * these specifications and shape may be changed for improvement without prior notice.
TQ Series Hydraulic Casing Tong Product Description TQ series of casing power tongs are widely used for making up and breaking out pipes or casinga in diameters of 4~13 3/8 inch. the tong heads are designed "open"type and can freely clamp and escape from the casing.TQ casing power tongs are safe, raliable and easy to handle with mobility.this series of tongs can be connected to computer controlling units and can serve as ideal well mechnical tool for surface operations in oil fields. national invention patent of the tongs has been got. the tongs are designed and manufactured according to API 7K specification for drilling equipment. TQ series of hydraulic casing tongs are widely used for making-up and breaking-out of casings or pipes. The series of casing tongs are wholly hydraulic driven. The tongs are configured with a large-torque motor. And per form mechanical gearchange. Structure is simple and operation is safe. The casing tongs can be supplied with torque device to perform computer monitoring and managing on pressure, torque and rounds. The casing tong are designed and manufactured according to SY/T5074 standard and API spec 7Kspecification for drilling and well servicing equipment. Products Drawing TQ Series Hydraulic Casing Tong Main Parameters Casing Power tongs Technical specification: Model TQ178/16 TQ340/35 TQ356/55 Size Range mm 101.6-178 114.3-340 114.3-356 inch 4-7 4 1/2 - 13 3/8 4 1/2 - 14 Max Pressure Mpa 18 16.6 psi 2610 2400 Working flow L/min 110-160 110-140 gpm 29.3-42.7 29.3-37.3 Air Pressure Mpa 0.5-0.9 psi 72-130 Max. Torque kN.m 16 35 55 ft.lbf 11800 25800 40560 Speed rpm 9-79 3.5-86 4-70 Size mm 1450*760*740 1580*900*880 1770*960*850 in 57*30*29.1 62.2*35.4*34.6 69.7*37.8*33.5 Weight Kg 580 780 1150 lb 1280 1720 2530 TQ series hydraulic casing power tongs technical specification: Model TQ178/16Y TQ340/35Y TQ356/55Y TQ508/70Y TQ610/60Y TQ340/85Y Size rang mm 101.6-178 114.3-340 114.3-365 244.5*508 244.5-610 114.3*340 inch 4-7 4 1/2 - 13 3/8 4 1/2 - 14 9 5/8 -20 9 5/8-24 4 1/2-13 5/8 Max. Pressure Mpa 18 20 18 psi 2610 2900 2610 Working Flow L/min 110-160 110-170 120-180 110-170 gpm 29.3-42.7 29.3-45.4 32-48 29.3-45.4 Max.Torque kN.m 16 35 55 70 60 85 ft.lbf 11820 25800 40560 51600 44250 62680 Speed rpm 9-79 8-90 4.8-61 4-43.6 5-45 3.2-45 Size mm 1500*760*800 15800*900*860 1770*960*780 2080*1280*760 2330*1310*840 1995*1150*680 inch 59*30*31.4 62.2*35.4*33.8 69.7*37.8*30.7 82*50.4*30 91.7*51.6*33 78.5*45.3*26.8 Weight Kg 560 760 1100 1550 2100 1700 lb 1230 1670 2420 3410 4620 3740
Mud Pump Cylinder Head Valve Cover Product Description Our company is specialized in interchangeable parts for brand name mud pump, including Emsco, National, Ideco, Gardner Denver, etc. and other brand liners.All items,oilfield API mud pump parts cylinder head/valve cover are manufactured to API 7K quality standards. Parts are available for these popular pump models: EMSCO:F-1300,F-1600,FB1300,FB1600,F-800,F-1000,F-500,F-350,DB-550,DA-700, FA-1600/1300, FC-2200, D-300/500, D-375, D-700 IDECO: T-500, T-800, T-1000, T-1300, T-1600 NATIONAL: 7P50, 8P80, 9P100, 10P130, 12P160, N1300, C-250, K-700, 14-P-220, E-700/G-1000, K-500, K-380, K-500A/700A, C-250/350, JWS-400 GARDNER DENVER:PZ7,PZ8/9,PZ10/11,FK-FXK,FY-FXD,FD-FXX,FG-GXG, FG-FXG, KG-KXG, FQ-FXQ, FF-FXF,FF-FXP OILWELL: A-560/600-PT, A-850-PT/A-1100-PT, A-1700-PT/A-1400-PT And other brand spare parts for Wirth,Opi,Ellis Williams,Wilson,Gaso,Skytop/Brewster. Mud Pump Spare Parts Details,oilfield API mud pump parts cylinder head/valve cover Fluid End: liner, , piston rubber, valve body, valve seats, valve rubber, liner seals, cylinder head gasket, valve cover seals, piston rod, clamp assembly, valve cover, cylinder head, flange head, cylinder flange, cylinder cover, inhalationcapsules, etc. Power End: extension rod, crosshead, crosshead pin, cross pin baffle, upper and lower guide plate, packing boxes, seal ring, oil seal lips Dampener: Dampener diaphragm, pressure gauges, fittings, tees, angle type valve, relief valve, exhaust valve Other Accessories: JA-3 valve assembly, the small piston, small rod, cushion, 2S gear pumps, 32PL spray pump. Drilling Mud Pump Parts
Claw coupling, engineering parts, precision cnc components, hydrualic fittings, pnuematic pump spare parts, washer, base plates, bolts and clamps..
1. Main Technical Parameters: (1). Connection: 7 5/8 REG Pin. O.D. (mm): Ï?210. Length (mm): 290. (2). Connection: 6 5/8 REG Pin. O.D. (mm): Ï?190. Length (mm): 280. (3). Connection: NC 50 Pin. O.D. (mm): Ï?155. Length (mm): 270. (4). Connection: NC 46 Pin. O.D. (mm): Ï?150. Length (mm): 270. (5). Connection: NC 38 Pin. O.D. (mm): Ï?115. Length (mm): 260. (6). Connection: NC 31 Pin. O.D. (mm): Ï?100. Length (mm): 210. (7). Connection: 2 3/8 REG Pin. O.D. (mm): Ï?80. Length (mm): 190. (8). Connection: NC 26 Pin. O.D. (mm ): Ï?89. Length (mm): 200. (9). Connection: 3 1/2 REG Pin. O.D. (mm): Ï?100. Length (mm): 220. (10). Connection: 4 1/2 REG Pin. O.D. (mm): Ï?145. Length (mm): 260. (11). Connection: 2 7/8 EUE Pin. O.D. (mm): Ï?80. Length (mm): 220. (12). Connection: 7 5/8 REG Box. O.D. (mm): Ï?230. Length (mm): 290. (13). Connection: 6 5/8 REG Box. O.D. (mm): Ï?200. Length (mm): 280. (14). Connection: NC 50 Box. O.D. (mm): Ï?160. Length (mm): 260. (15). Connection: NC 46 Box. O.D. (mm): Ï?160. Length (mm): 260. (16). Connection: NC 38 Box. O.D. (mm): Ï?120. Length (mm): 270. (17). Connection: NC 31 Box. O.D. (mm): Ï?120. Length (mm): 270. (18). Connection: 2 3/8 REG Box. O.D. (mm): Ï?110. Length (mm): 200. (19). Connection: NC 26 Box. O.D. (mm): Ï?110. Length (mm): 200. (20). Connection: 3 1/2 REG Box. O.D. (mm): Ï?130. Length (mm): 270. (21). Connection: 4 1/2 REG Box. O.D. (mm): Ï?160. Length (mm): 260. (22). Connection: 2 7/8 EUE Box. O.D. (mm): Ï?80. Length (mm): 220. 2. Product Description: Lifting cap is one special tool for lifting of drilling tools in petroleum, natural gas, drilling engineering and geographical exploration, also called as lifting bail. We can provide the lifting cap or lifting bail in integral type or circular type. 3. Features: (1). API certified product with national best quality. (2). Forging type products used for lifting pipe collars, with regular thread connection. (3). Customized products available. (4). Warranty six months after sale. 4. Certification: API. 5. Condition: New. 6. Color: Required. 7. Model: Lifting cap. 8. Place of Origin: China (Mainland). 9. Price FOB in USD: 300~800/Piece(s). 10. Material: Carbon Steel. 11. Processing Type: Forging. 12. Machine Type: Drilling Tool. 13. Use: Well Drilling. 14. Processing Time: 30days. 15. Supply Ability: 10000 pieces/per month. 16. Payment Terms: T/T; L/C; Western Union. 17. Packing & Delivery: (1). Packing Details: Standard Export Package. (2). Port: China Main Port.
1. Main Technical Parameters: (1). Connection: 7 5/8" REG Pin. O.D. (mm): 210. Length (mm): 290. (2). Connection: 6 5/8" REG Pin. O.D. (mm): 190. Length (mm): 280. (3). Connection: NC 50 Pin. O.D. (mm): 155. Length (mm): 270. (4). Connection: NC 46 Pin. O.D. (mm): 150. Length (mm): 270. (5). Connection: NC 38 Pin. O.D. (mm): 115. Length (mm): 260. (6). Connection: NC 31 Pin. O.D. (mm): 100. Length (mm): 210. (7). Connection: 2 3/8" REG Pin. O.D. (mm): 80. Length (mm): 190. (8). Connection: NC 26 Pin. O.D. (mm): 89. Length (mm): 200. (9). Connection: 3 1/2" REG Pin. O.D. (mm): 100. Length (mm): 220. (10). Connection: 4 1/2" REG Pin. O.D. (mm): 145. Length (mm): 260. (11). Connection: 2 7/8" EUE Pin. O.D. (mm): 80. Length (mm): 220. (12). Connection: 7 5/8" REG Box. O.D. (mm): 230. Length (mm): 290. (13). Connection: 6 5/8" REG Box. O.D. (mm): 200. Length (mm): 280. (14). Connection: NC 50 Box. O.D. (mm): 160. Length (mm): 260. (15). Connection: NC 46 Box. O.D. (mm): 160. Length (mm): 260. (16). Connection: NC 38 Box. O.D. (mm): 120. Length (mm): 270. (17). Connection: NC 31 Box. O.D. (mm): 120. Length (mm): 270. (18). Connection: 2 3/8" REG Box. O.D. (mm): 110. Length (mm): 200. (19). Connection: NC 26 Box. O.D. (mm): 110. Length (mm): 200. (20). Connection: 3 1/2" REG Box. O.D. (mm): 130. Length (mm): 270. (21). Connection: 4 1/2" REG Box. O.D. (mm): 160. Length (mm): 260. (22). Connection: 2 7/8" EUE Box. O.D. (mm): 80. Length (mm): 220. 2. Product Description: Lifting cap is one special tool for lifting of drilling tools in petroleum, natural gas, drilling engineering and geographical exploration, also called as lifting bail. We can provide the lifting cap or lifting bail in integral type or circular type. 3. Features: (1). API certified product with national best quality. (2). Forging type products used for lifting pipe collars, with regular thread connection. (3). Customized products available. (4). Warranty six months after sale. 4. Certification: API. 5. Condition: New. 6. Color: Required. 7. Model: Lifting cap. 8. Place of Origin: China (Mainland). 9. Material: Carbon Steel. 10. Processing Type: Forging. 11. Machine Type: Drilling Tool. 12. Use: Well Drilling. 13. Processing Time: 30 days. 14. Supply Ability: 10000 pieces/per month. 15. Payment Terms: T/T; L/C; Western Union. 16. Packing & Delivery: (1). Packing Details: Standard Export Package. (2). Port: China Main Port.
Agricultural implements and farm machinery, zero till drill, zero till punch planter(starwheel), pipe couplings, dismantling joints, flange adaptor, repair clamp, repair sleeve, expansion joint, lock coupling, coupling.Manufacturer, Supplier, Distributor, Exporter
Name of product HC6C-CSPS-E4.0-6.0 Corrugated Steel Pipe Specification INNER DIAMETER: 750~3000MM OUTSIDE DIAMETER: ID+WT+D WALL THICKNESS: 2.0~7.5MM SPACING WAVE: 68~200MM HEIGHT OF WAVE: 13~55MM LENGTH: 750~12000MM or according to the customer's request SYSTEM INTERFACE: Overlap connection,concentric reducer,flange Technique Hot dip zinc Product Features Lightweight-can be nested for economical shipping High strength and durable Long service life-capable of 100+years Fast installation-economical,versatility,and flexibility Environmentally Application 1. structral relines,road culverts. 2.storm sewers 3.stormwater detention systems 4. oil or gas transportation 5. fluid pipe 6. line pipe 7. drill pipe 8. boiler pipe 9. bridge replacement 10. other uses we can produce according to customer requirement Surface treatment galvanized or as per required by customer's Package plastic caps on both ends, steel bundle or according to the customer's Delivery time 10~30 days after receiving the deposit,depends on the order quantity
Name of product HC6C-CSPS-E4.0-6.0 Corrugated Steel Pipe Specification INNER DIAMETER: 750~3000MM OUTSIDE DIAMETER: ID+WT+D WALL THICKNESS: 2.0~7.5MM SPACING WAVE: 68~200MM HEIGHT OF WAVE: 13~55MM LENGTH: 750~12000MM or according to the customer's request SYSTEM INTERFACE: Overlap connection,concentric reducer,flange Technique Hot dip zinc Product Features Lightweight-can be nested for economical shipping High strength and durable Long service life-capable of 100+years Fast installation-economical,versatility,and flexibility Environmentally Application 1. structral relines,road culverts. 2.storm sewers 3.stormwater detention systems 4. oil or gas transportation 5. fluid pipe 6. line pipe 7. drill pipe 8. boiler pipe 9. bridge replacement 10. other uses we can produce according to customer requirement Surface treatment galvanized or as per required by customer's Package plastic caps on both ends, steel bundle or according to the customer's Delivery time 10~30 days after receiving the deposit,depends on the order quantity
Name of product HC6C-CSPS-E4.0-6.0 Corrugated Steel Pipe Specification INNER DIAMETER: 750~3000MM OUTSIDE DIAMETER: ID+WT+D WALL THICKNESS: 2.0~7.5MM SPACING WAVE: 68~200MM HEIGHT OF WAVE: 13~55MM LENGTH: 750~12000MM or according to the customer's request SYSTEM INTERFACE: Overlap connection,concentric reducer,flange Technique Hot dip zinc Product Features Lightweight-can be nested for economical shipping High strength and durable Long service life-capable of 100+years Fast installation-economical,versatility,and flexibility Environmentally Application 1. structral relines,road culverts. 2.storm sewers 3.stormwater detention systems 4. oil or gas transportation 5. fluid pipe 6. line pipe 7. drill pipe 8. boiler pipe 9. bridge replacement 10. other uses we can produce according to customer requirement Surface treatment galvanized or as per required by customer's Package plastic caps on both ends, steel bundle or according to the customer's Delivery time 10~30 days after receiving the deposit,depends on the order quantity
Name of product HC6C-CSPS-E4.0-6.0 Corrugated Steel Pipe Specification INNER DIAMETER: 750~3000MM OUTSIDE DIAMETER: ID+WT+D WALL THICKNESS: 2.0~7.5MM SPACING WAVE: 68~200MM HEIGHT OF WAVE: 13~55MM LENGTH: 750~12000MM or according to the customer's request SYSTEM INTERFACE: Overlap connection,concentric reducer,flange Technique Hot dip zinc Product Features Lightweight-can be nested for economical shipping High strength and durable Long service life-capable of 100+years Fast installation-economical,versatility,and flexibility Environmentally Application 1. structral relines,road culverts. 2.storm sewers 3.stormwater detention systems 4. oil or gas transportation 5. fluid pipe 6. line pipe 7. drill pipe 8. boiler pipe 9. bridge replacement 10. other uses we can produce according to customer requirement Surface treatment galvanized or as per required by customer's Package plastic caps on both ends, steel bundle or according to the customer's Delivery time 10~30 days after receiving the deposit,depends on the order quantity
Name of product HC6C-CSPS-E4.0-6.0 Corrugated Steel Pipe Specification INNER DIAMETER: 750~3000MM OUTSIDE DIAMETER: ID+WT+D WALL THICKNESS: 2.0~7.5MM SPACING WAVE: 68~200MM HEIGHT OF WAVE: 13~55MM LENGTH: 750~12000MM or according to the customer's request SYSTEM INTERFACE: Overlap connection,concentric reducer,flange Technique Hot dip zinc Product Features Lightweight-can be nested for economical shipping High strength and durable Long service life-capable of 100+years Fast installation-economical,versatility,and flexibility Environmentally Application 1. structral relines,road culverts. 2.storm sewers 3.stormwater detention systems 4. oil or gas transportation 5. fluid pipe 6. line pipe 7. drill pipe 8. boiler pipe 9. bridge replacement 10. other uses we can produce according to customer requirement Surface treatment galvanized or as per required by customer's Package plastic caps on both ends, steel bundle or according to the customer's Delivery time 10~30 days after receiving the deposit,depends on the order quantity
Name of product HC6C-CSPS-E4.0-6.0 Corrugated Steel Pipe Specification INNER DIAMETER: 750~3000MM OUTSIDE DIAMETER: ID+WT+D WALL THICKNESS: 2.0~7.5MM SPACING WAVE: 68~200MM HEIGHT OF WAVE: 13~55MM LENGTH: 750~12000MM or according to the customer's request SYSTEM INTERFACE: Overlap connection,concentric reducer,flange Technique Hot dip zinc Product Features Lightweight-can be nested for economical shipping High strength and durable Long service life-capable of 100+years Fast installation-economical,versatility,and flexibility Environmentally Application 1. structral relines,road culverts. 2.storm sewers 3.stormwater detention systems 4. oil or gas transportation 5. fluid pipe 6. line pipe 7. drill pipe 8. boiler pipe 9. bridge replacement 10. other uses we can produce according to customer requirement Surface treatment galvanized or as per required by customer's Package plastic caps on both ends, steel bundle or according to the customer's Delivery time 10~30 days after receiving the deposit,depends on the order quantity