Fiber optic patchcord cables are used in GSM base stations, Fiber Optic interconnections, patch panels, distribution point connections and ODF connections with its structure suitable for indoor use. The following types of fiber optic cable patchcord cables are mostly used in base stations. LC LC MM 50/125 DX patchcord fiber optic cable LC LC SM 9/125 DX patchcord fiber optic cable SC LC MM 50/125 DX patchcord fiber optic cable SC LC SM 9/125 DX patchcord fiber optic cable Fiber optic breakout cables are prepared in different quantities according to the needs in the field.
Breakout optical cable, suitable for outdoor use, is used for RRU assembly in 3G and LTE (4G) base stations. Fiber optic is a system that works on the principle of transmitting light through a pure glass thread as thick as a human hair and produced very precisely. The main reason for choosing cables produced in this way is that environmental conditions are severe; It is not affected by humid, damp places where electrical field interference is intense and always provides a stable connection. Fiber optic cables transmit at the speed of light, that is, 300 thousand km per second. Because of these aspects, they are designed for data transfer over long distances. LC LC MM 50/125 DX type breakout fiber optic cable is mostly used in base stations. Fiber optic breakout cables are prepared in different quantities according to the needs in the field.
We are manufacturing of Fiber Optic cable and accessories from INDONESIA. Here the type and function for your reference: 1. G.657.A2 (Aerial cable capacity 1-2 core) for ACCESS NETWORK; 2. G.652.D (Aerial cable, Duct cable, Direct Buried cable, SCPT, ADSS cable with capacity 2-288 core) for DISTRIBUTION NETWORK; 3. G.655.C (Aerial cable, Duct cable, Direct Buried cable, ADSS cable capacity 2-288 core) for BACKBONE NETWORK; 4. G.654.E (Aerial cable, Duct cable, Direct Buried cable, ADSS cable capacity 2-288 core) for 3U (Ultra high speed, Ultra large capacity, Ultra long-haul);
Scrap Optical fiber cables
Singlemode Storage temperatureï¼?-20â??+60â?? armored & non-armored simplex/duplex/multi core Soft. Easy to strip High quality tight buffered or Loose tube Excellent mechanical and environmental performance Small cable volume. Ling weight
1single modeG652DG655,G657A1,G657A2,G657B3) and multimode(OM1,OM2,OM3,OM4) 2,simplex,duplex,multi core 3,armored and non-armored 4,Storage temperature(-40+60) 5,Adopted to Outdoor distribution 6,uitable for aerial (self- supporting),decrease cost 7,Long distance and local area network communication 8,Stainless steel or gaivanized steel self-supporting 9,Excellet mechanical and environmental performance
Description: The Simplex cable uses single 900µm tight buffered fiber as fiber optic transmission medium, covered with aramid yarn as strength member, then extruded with thermoplastic polyurethane sheath.
Description: Stranded Loose Tube Cable with Aluminum and Steel Tape plus Steel Wire Armor GYTA53+33 or GYTA53+333. Steel wire used as the central strength member.Special tube filling compound ensure a critical protection of fiber. Crush resistance and flexibility
Quick information Brand name: feiniuplace of origin: chinamodel number : 014application : industrialconductor material : aluminuminsulation material : rubberjacket : pvctype : low voltage Description Fiber optic cable factory price outdoor cable manufacturer Adss cable also known as the whole medium self-supporting fiber optic cable, the whole medium that is used in the optical fiber is a full dielectric material, self-supporting fiber cable is to strengthen its own components to withstand weight and external load. The name of the cable on the use of this environment and its key technology: because it is self-supporting, so its mechanical strength plays a decisive role; the use of all-media material is because the cable is in a high-voltage strong electric environment, must be able to withstand strong electricity influence; because it is used in the power tower overhead, so there must be supporting the cable will be fixed on the tower. Adss cable has three key technologies: fiber optic cable mechanical design, the suspension point to determine and supporting the selection and installation.
Submarine communications and telecommunication.
Product description This product description is for 08 fiber single mode double armored optical fiber cable designed to meet the technical requirements as mentioned as per specification documents, it fulfills the design for the applications desired therein. The design is based on stranded loose tube which provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. This cable is suitable for both duct and direct buried applications, it provides extra strength and rodent protection by using double armor and two inner coats. The stranded loose tubes contain thixotropic jelly for protection of the optical fibers as required. The thixotropic jelly protects the fibers within the loose tubes and provides excellent quality filling compound for stopping ingress/transport of water into the cable. The product is manufactured on itu-t g.652.D fiber. It facilitates easy and economical installation. Features & application Excellent optical, mechanical & environmental performance High strength-to-weight ratio Csm dielectric type v fiber reinforced plastic Dry block construction High tensile strength High crush strength Corrosion resistance Kink resistance Very light weight Very flexible & small bending radius Long haul / backbone application Junction communication systems All dielectric applications Catv applications. Construction parameters Fiber count as per customer¦s requirement No. Of loose tube to be designed to meet the specifications No. Of fiber in each tube to be designed to meet the specifications. Color of fibers as per tia/eia-598a Loose tube material polybutylene terephthalate (pbt) Loose tube filling material thixotropic jelly Central strength member fiber reinforced plastic (frp) v non metallic Core moisture protection methodology jelly filled construction Peripheral strength member glass yarn material medium density/high density polyethylene (mdpe/hdpe).
Feature: Excellent corrosion resistant, waterproof, flame retardant properties; More cable cores, compact structure, small size, and light weight; Flexible, small bending radius, and excellent stress and strain properties. Application: Used in indoor cabling, especially used as distribution cable; Used in pigtails and patch cord; Used as interconnect lines of equipment, and used in optical connections in optical communication equipment rooms and distribution frames.
Product description of simplex tactical fiber optic cable for broadcast television communication In the gyts cable, single-mode/multimode fibers are positioned in the loose tubes, while the loose tubes strand together around the strength member into a compact and circular cable core.The strength member would be covered with polyethylene (pe).The water-blocking materials are distributed into the interstices of the cable core.Then the cable is completed with a pe sheath. ?product features of simplex tactical fiber optic cable for broadcast television communication 1.Excellent mechanical and temperature performance.Critical protection to fibers. 2.Excellent ultraviolet prevention with pe sheath. 3.Excellent crush resistance and flexibility. 4.The following measures are taken to ensure the water blocking performance of the cable: - single steel wire strength member used as the central strength member - special water-blocking filling compound in the loose tube - 100% cable core filling
Low insertion loss. High return loss. High reliability and stability. Excellent exchangeability and durability. FC, LC, SC, ST, MU, MTRJ, E2000, DIN, D4, SMA, ESCON, FDDI, MPO etc. is available. PC, UPC or APC polishing. Single mode and multi-mode available. Simplex, duplex or fan-out available. ;0.9, ;2.0, ;3.0 available. Length: 1m, 1.5m, 2mor customized. PVC, LSZH or hytrel available. Fully compliant with the standards of Telcordia GR-326-CORE and RoHS.
Product name AOC DP1.4 HDMI Cable game dedicated Cable length 6-100m Connector DP Male-DP Male (with a lock) Bandwidth DP1.4 standardizations,32.4G(8.1Gbps*4) Resolution 4k/120HZ 4K/144HZ 8K/60HZ Power No extra power supply Power consumption Source:85mW/3.3V, Display:290mW/3.3V Cable diameter Ï?4.5-5.0mm Tensile force 100N/200N Crush Resistance 200N/100N Min curvature radius 20mm/10mm Work/storage temperature 0~50°C/-20~70°C Quick Details Place of Origin: Guangdong, China Brand Name: POSHSHINE Model Number: PS-AOC DP1.4 Type: Optical Fiber Application: Multimedia Packing: Polybag Outer Diameter: 5.0MM Connector Color: Gold Connector Type: HDTV, DP AM-AM Shielding: Foil Gender: Male-Male Conductor: 24-30AWG TC/BC/CCS Certification: HDMI ATC/ CE/ FCC /Rohs/ CL2/FT4 Connector: Gold Plated Length: 6-100M Jacket: CL2 FT4 PVC, Black (CMP customized) Working current: â?¤45mA Warranty: 12 Months Power Consumption: 250mW (max) Logo: Custom logo
MPVCS-01 this product has good mechanical physical performance and extrusion processing performance, and it is suitable for the sheath material of wire and cable with low temperature of 70.
MPVCS-01 this product has good mechanical physical performance and extrusion processing performance, and it is suitable for the sheath material of wire and cable with low temperature of 70ºC. Properties Typical Value Test Method Appearance Black granule Visual Density /(g/cm3)
12cores, apply for duct, aerial, direct burial type single model fiber optic cable 3km per wooden drum fiber optic cable or by customer's require
•key specifications/special features: non-metal strength member. •features: High-quality optical fiber provides good transmission performance Accurate fiber excess length control ensures excellent mechanical and temperature performance Special filling gel filled loose tubes provide perfect optical fiber protection All section water blocking present reliable performance of moisture-proof and water block High young's modulus fiber reinforced plastic (frp) as central strength member gives high-tensile strength All dielectric structure, lightweight, easy installation, good electromagnetic resistance, suitable for operating in electrical system or frequently lighting areas Strict craft and raw material enable lifespan over 30 years Operating temperature: -30 to 70°c Storage temperature: -40 to 70°c Applicable to direct burial/aerial installation Primary competitive advantages Shenzhen kstcable co., ltd specialized in designing and manufacturing And distributing of all kinds of fiber optic cable and accessories as well as telecom products . Kst company has about 10 years expeirences in cable industry, we are cooperate with 3m, Did project including thai telecom, doha airport, doha telecom , dubai telecom , slovenia telecom And other big projects Main export markets: Eastern europe North america Mid east/africa Central/south america Asia Western europe Australasia Wooden package, 2km/drum 3km/drum up to customers require
Applications: Long distance telephone, catv, data communications. Installations: Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct Burial (with armouring). Construction: The cable consists of a single tube containing 2 up to 24 fibers, which is filled with water-blocking gel. When the Cable contains more than 12 fibers, they are divided in two groups. A colored thread identifies each group. Physical Protection and tensile strength are provided by aramid yarn or fiberglass wound around the tube. Either pe or lszh Jacket can be used. A ripcord is located under the jacket to facilitate jacket removal. Technical parameters: Maximum transmission distance: 6km (single mode); 0.3km (multimode) Maximum pulling load: 1500n (short term installation); 900n (long term installation) Maximum compressive load: 3000n (3.3mm loose tube diameter); 5000n (4.5mm loose tube diameter) Twist (torsion length): 125 x overall diameter Working temperature: -20íµ ~ +70íµ (pe sheath) Storage temperature: -40íµ ~ +70íµ (pe sheath) Product highlights: Small diameter and light weight. Through the control of the fiber exceed length which is the key technology in optical fiber manufacture, the fiber Cable can achieve better pulling load and operating temperature. Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the Tube can provide water protection for the fibers inside the tube. Compact construction of the fiber cores can prevent the fiber to shrink back. This can sustain higher tensile stress And achieve better flexibility. íewide operating temperature range. Roll, box, drum
