Medicinal aluminum foil is generally made of electrolytic aluminum with a purity of more than 99% and is rolled. Aluminum has the advantages of abundant resources, low price, and easy processing. When used as pharmaceutical packaging materials, aluminum foil is the only metal material in the packaging materials. Aluminum foil is non-toxic, odorless, has excellent electrical conductivity and light-shielding properties, has extremely high moisture resistance, gas barrier properties and taste retention properties, and can effectively protect the packaged items. It is a packaging material that has yet to be replaced. Commonly used alloy numbers for medicinal aluminum foil: PTP medicinal aluminum foil: PTP medicinal aluminum foil is also called medicinal plate aluminum foil and capsule aluminum foil. It is mostly made of 8011-H18 aluminum foil or 8011-O aluminum foil. Blister medicinal aluminum foil: Blister aluminum foil is also called cold-formed medicinal foil. It is mostly made of 8021-O aluminum foil and is used for high-end high-end airtight, moisture-proof and light-shielding pharmaceutical packaging. The thickness is 0.04-0.065 mm; Medicinal tropical aluminum foil: Tropical aluminum foil is also called aluminum-plastic aluminum. Tropical blister packaging is equivalent to adding a cold stamped aluminum foil cover on the outside of a thermoformed plastic blister and PTP aluminum foil. 8021-O aluminum foil and 8079-O aluminum foil are mostly used, which are high-end packaging aluminum foils for pharmaceutical packaging; Advantages of medicinal aluminum foil: 1. High-precision printing, rich colors and clear patterns; plain foil can be printed online on automatic pharmaceutical blister packaging machines. 2. It has excellent light-shielding, moisture-proof, oxygen-blocking, moisture-proof, chemical stability and fragrance-preserving properties. 3. The protective layer has excellent high temperature resistance, and the heat sealing layer has good heat sealing performance. It can be heat sealed to PVC, PVC/PVDC, NY/AL/PVC and other composite sheets with good sealing performance. 4. Aluminum foil is used as the base material, which is easy to push or puncture, making it convenient for consumers to take. The packaged blister board is easy to carry, easy to transport, store and prevent contamination. 5. Suitable for high-speed automated production, and can provide products with different width specifications according to the user's packaging machine model.
Product overview 1. It is composed of polysiloxane, dispersing agent, stabilizer, etc.; 2. It is highly compatible with foaming medium, with rapid defoaming speed and excellent bubble elimination performance; 3. It is easy to disperse in water. Technical specifications Appearance: White to yellowish emulsion pH value: 6ï½?8 Effective ingredients: 99% Performance characteristics 1. Dyeing at normal temperature in textile slurry; 2. Industrial water treatment, coating and pesticide defoaming; 3. Elimination of other aqueous phase bubble with quick defoaming as required; 4. For the oilfield drilling fluid defoaming, the reversion rate of slurry is close to 100%. Usage tips The antifoaming agent has excellent foam elimination and inhibition performance, and can be added to product after foam generation or as foam inhibition components. The additive amount of defoaming agent can be 10~100ppm. The optimal additive amount is determined by customers through test according to specific condition. Defoaming agent product can be used directly or after dilution. If the product can be fully stirred and dispersed in foaming system, and can be directly added without dilution. If it needs to be diluted, it can't be directly diluted with water, otherwise the layering, demulsification, etc. easily occur, thus influencing the product quality. For consequences generated due to direct dilution with water or process of use of the product in other incorrect methods, our company doesn't undertake the responsibilities. Packing and storage �· The product is packaged with 25kg, 50kg, 120kg or 200kg plastic bucket. In case of special requirements, the bucket can be customized through consultation according to the special requirements. �· Its storage temperature shall be at 5~30â??. It shall not be placed near heat sources or insolated in the sunshine. The acid, alkali, salt, etc. shall not be added to product. The container shall be sealed in case of non-use to avoid being polluted by harmful bacteria. If it is layered after being placed for a long time, it shall be stirred evenly, and its using effect isn't influenced. The product would not freeze below 0 . In case of freezing, its using effect isn't influenced after melting and stirring. The guarantee period of product at the suggested storage temperature and without sealing, lasts for 12 months from the production date.
We offer a UL/FM Approved and LPCB Certified  wide range of EMACO Firefighting Equipment products for: Sprinklers: Designed for use in automatic sprinkler systems - Pendent, Upright, Conventional and Sidewall Sprinkler. Temperature response - Standard/Quick Response. Temperature Rating : 57 C, 68 C, 79 C, 93 C,141 C Finish - Brass / Chrome / White plated Nozzles: Open type non-automatic nozzles, UL/FM Listed. *Medium Velocity Fixed Spray Nozzle:* Specifications: 1. Material - Brass, SS, Aluminium Bronze 2. K Factor - 18, 22, 30, 35, 41, 51, 64, 79, 91, 102 3. Spray Angle - 65 , 80 , 90 , 100 , 110 , 120 , 140 & 160 ° 4. Finish - Brass, Chrome, Electroless Nickel plated & Epoxy powder Coated 5. Working Pressure - 175psi (12 bar) 6. End Connection - ½" (15mm) BSPT Reverse Action - Medium Velocity Fixed Spray Nozzle: Specifications: 1. Material - Brass, SS, Aluminium Bronze, Copper 2. K Factor - 18, 22, 30, 51, 64, 79, 102 3. Spray Angle - 120 & 140 4. Finish - Brass, Chrome, Electroless Nickel plated & Epoxy powder Coated 5. Working Pressure - 175psi (12 bar) 6. End Connection - ½" (15mm) BSPT High Velocity Fixed Spray Nozzle: Specifications: 1. Material - Brass, SS, Aluminium Bronze 2. K Factor - 18, 22, 23, 26, 32, 42, 48, 58, 61, 78 3. Spray Angle - 75 °, 80 , 90 , 100 , 115� , 120 4. Finish - Brass, Chrome, Electroless Nickel plated & Epoxy powder Coated 5. Working Pressure - 175psi (12 bar) 6. End Connection - 3/4 (20mm) BSPT/ NPT & 1" (25mm) BSPT/ NPT
1. Raw materials: Our edge banding use high quality PVC and ABS as raw materials. Imported PVC particles comply with environmental protection standards, high purity, without any other materials, and it is also more environmentally friendly. 2. Clear texture: We are now using four color printing process by single extrusion which is more different from normal transfer printing process. It can make clear texture and looks like real wood edge banding. 3.Good abrasion resistance: All of our edge band surfaces have UV, it has high color stability, no easy to fade, anti detergent. So, cleaning agent can be used. 4. Color stable: Chuangxing's edge banding is not easy to fade. It's made of pure raw material, with scientific formula and according to the SGS standard. 5. Accurate size: Chuangxing's edge banding is produced by the imported professional assembly line, with stable quality. It won't affect the processing or use due to the size deviation. 6. Colorful design: Chuangxing matches colors by computer system, we focus on keeping same color after trim, now we have more than 400 colors of copper plates available. 7. Good flexibility: Even on a small plate with bending radius, our edge banding won't have wood grain fracture. 8. Stable expansion: the size stability of our edge banding is good, there won't be any excessive shrinkage or expansion due to a large temperature difference. 9. Small glue-line: Our edge banding is in the shape of internal bending, the hot-melt glue-line is the smallest after sealing, the appearance performance is better, and the moisture resistance will be the largest satisfied while the dust is prevented from entering. 10. The back coating of our edge banding has fluorescent agent, it can glimmer under the currency detector, so it's convenient for customer to identify. 11. Easy to processing: Our back coating is suitable for all kinds of hot-melt, so we can ensure not easy to fall and the bending will be more solid. 12.Good practical performance: Our edge banding can be uniform in thickness, smooth surface, clear texture, base color and print color, without any white appearance while trimming or bending.The bottom glue also has good effect, it has low requirement of sealing temperature, so that sealing can be more convenient and quick.
SZ series turret rewinder is with matured and most advanced technology in the world, and own the ability to work in-line with die cutting machine, printing machine, slitting machine and work off line as a stand-alone solution with a separate unwinder. Automatic tube threading, automatic gluing(optional no glue), automatic cutting & rewinding and automatic label sticking, which can finish your customers orders quickly, shorten the lead-time, increase your productivity, save your labor cost and raise your product competitive advantage in the market. It can accept both printed labels and blank labels rewinding. Machine Application: This type machine is our latest innovation for small label rolls automatic cutting and rewinding with high-efficiency. Machine Highlights: 1. Servo driven and with accurate automatic loop tension control 2. Can handle a wide range of roll wide: 330, 450 and 570mm 3. Glue free system can be selected 4. Both Blank label and printed label are available 5. Precision cut in gap of finished label rolls 6. Servo motor control Mechanical arm automatic feeding system 7.Petal type holder: easier for the adjustment, not be easier loosen 8.Slitting part:servo driven for semi automatic adjustment controlled by the touch screen, save labor. 9:2 second generations labeling device: reduce noise and air compressor capacity , with belt transmission. The advantage of ours machine(finished by new generations 2 second generations glue-less non-stop turret rewinder): 1:No creases 2:Zero waste 3:save glue cost 4:save electricity consumptions 5:max rewinding max at 300mm diameters 6:die cutting scrapping waste by mini 1mm 7: non stop no need material storage rack can realized no need decreasing the speed then cutting 8: servo driven for the precision cut into gap at high speed 9: servo driven for the die cutting into the dotted line 10: Asynchronous motor for the material loader PS others:1:Fold on the label 2:4-5 label waste at least Specification: Machine Model: SZ-330 SZ-450 SZ-570 Max rewinding diameter (glue type):350mm 350mm 350mm Max rewinding diameter (glue free): 300mm 300mm 300mm Max Paper feeding: 330mm 450mm 570mm Max rewinding speed: 80-150m/min 80-150m/min 80-150m/min Mini rewinding width: 30mm 30mm 30mm Power source: 380V/3P/50HZ 380V/3P/50HZ 380V/3P/50HZ Power: 13 kw 13 kw 13kw Air source: 0.8Mpa 1m3/min 0.8Mpa 1.5m3/min 0.8Mpa 1.5m3/min Machine Dimensions: 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2200x2800mm (glue type) 3700 x2200 x2800 (glue free) Machine weight: 2500 kgs (glue type) 3500 kgs (glue free) 2500 kgs (glue type) 3500 kgs (glue free) 2800 kgs (glue type) 3800 kgs (glue free)
SZ series turret rewinder is with matured and most advanced technology in the world, and own the ability to work in-line with die cutting machine, printing machine, slitting machine and work off line as a stand-alone solution with a separate unwinder. Automatic tube threading, automatic gluing(optional no glue), automatic cutting & rewinding and automatic label sticking, which can finish your customers orders quickly, shorten the lead-time, increase your productivity, save your labor cost and raise your product competitive advantage in the market. It can accept both printed labels and blank labels rewinding. Machine Application: This type machine is our latest innovation for small label rolls automatic cutting and rewinding with high-efficiency. Machine Highlights: 1. Servo driven and with accurate automatic loop tension control 2. Can handle a wide range of roll wide: 330, 450 and 570mm 3. Glue free system can be selected 4. Both Blank label and printed label are available 5. Precision cut in gap of finished label rolls 6. Servo motor control Mechanical arm automatic feeding system 7.Petal type holder: easier for the adjustment, not be easier loosen 8.Slitting part: servo driven for semi automatic adjustment controlled by the touch screen, save labor. 9:2 second generations labeling device: reduce noise and air compressor capacity , with belt transmission. The advantage of ours machine(finished by new generations 2 second generations glue-less non-stop turret rewinder): 1:No creases 2:Zero waste 3:save glue cost 4:save electricity consumptions 5:max rewinding max at 300mm diameters 6:die cutting scrapping waste by mini 1mm 7: non stop no need material storage rack can realized no need decreasing the speed then cutting 8: servo driven for the precision cut into gap at high speed 9: servo driven for the die cutting into the dotted line 10: Asynchronous motor for the material loader PS others:1:Fold on the label 2:4-5 label waste at least Specification: Machine Model: SZ-330 SZ-450 SZ-570 Max rewinding diameter (glue type):350mm 350mm 350mm Max rewinding diameter (glue free): 300mm 300mm 300mm Max Paper feeding: 330mm 450mm 570mm Max rewinding speed: 80-150m/min 80-150m/min 80-150m/min Mini rewinding width: 30mm 30mm 30mm Power source: 380V/3P/50HZ 380V/3P/50HZ 380V/3P/50HZ Power: 13 kw 13 kw 13kw Air source: 0.8Mpa 1m3/min 0.8Mpa 1.5m3/min 0.8Mpa 1.5m3/min Machine Dimensions: 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2200x2800mm (glue type) 3700 x2200 x2800 (glue free) Machine weight: 2500 kgs (glue type) 3500 kgs (glue free) 2500 kgs (glue type) 3500 kgs (glue free) 2800 kgs (glue type) 3800 kgs (glue free)
SZ series turret rewinder is with matured and most advanced technology in the world, and own the ability to work in-line with die cutting machine, printing machine, slitting machine and work off line as a stand-alone solution with a separate unwinder. Automatic tube threading, automatic gluing(optional no glue), automatic cutting & rewinding and automatic label sticking, which can finish your customers orders quickly, shorten the lead-time, increase your productivity, save your labor cost and raise your product competitive advantage in the market. It can accept both printed labels and blank labels rewinding. Machine Application: This type machine is our latest innovation for small label rolls automatic cutting and rewinding with high-efficiency. Machine Highlights: 1. Servo driven and with accurate automatic loop tension control 2. Can handle a wide range of roll wide: 330, 450 and 570mm 3. Glue free system can be selected 4. Both Blank label and printed label are available 5. Precision cut in gap of finished label rolls 6. Servo motor control Mechanical arm automatic feeding system 7.Petal type holder: easier for the adjustment, not be easier loosen 8.Slitting part:servo driven for semi automatic adjustment controlled by the touch screen, save labor. 9:2 second generations labeling device: reduce noise and air compressor capacity , with belt transmission. The advantage of ours machine(finished by new generations 2 second generations glue-less non-stop turret rewinder): 1:No creases 2:Zero waste 3:save glue cost 4:save electricity consumptions 5:max rewinding max at 300mm diameters 6:die cutting scrapping waste by mini 1mm 7: non stop no need material storage rack can realized no need decreasing the speed then cutting 8: servo driven for the precision cut into gap at high speed 9: servo driven for the die cutting into the dotted line 10: Asynchronous motor for the material loader PS others:1:Fold on the label 2:4-5 label waste at least Specification: Machine Model: SZ-330 SZ-450 SZ-570 Max rewinding diameter (glue type):350mm 350mm 350mm Max rewinding diameter (glue free): 300mm 300mm 300mm Max Paper feeding: 330mm 450mm 570mm Max rewinding speed: 80-150m/min 80-150m/min 80-150m/min Mini rewinding width: 30mm 30mm 30mm Power source: 380V/3P/50HZ 380V/3P/50HZ 380V/3P/50HZ Power: 13 kw 13 kw 13kw Air source: 0.8Mpa 1m3/min 0.8Mpa 1.5m3/min 0.8Mpa 1.5m3/min Machine Dimensions: 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2200x2800mm (glue type) 3700 x2200 x2800 (glue free) Machine weight: 2500 kgs (glue type) 3500 kgs (glue free) 2500 kgs (glue type) 3500 kgs (glue free) 2800 kgs (glue type) 3800 kgs (glue free)
According to the internal structure of the faucet, it can be divided into single hole faucet, 2-hole faucet and 3 hole kitchen faucet, the difference lies in the number of water outlets. 3 hole kitchen faucet can also be subdivided into laboratory 3 hole faucet with sprayer and general household 3 hole faucet, and their overall structure is roughly the same. The difference between the three hole faucet and other faucets is the difference in the number of water outlets. In actual life, the faucet with 3 holes is universal, because the 3-hole shower faucet has two water inlets. Likegro's 3 hole single handle bathroom faucet, while taking into account the beautiful and fashionable shape, also puts quality first. We use non-ferrous metal pure copper through precision casting and the faucet body is processed by machining, grinding and polishing, surface chrome plating, etc. The coating of the faucet body generally passes the neutral salt spray test. , to ensure that there is no rust phenomenon within the specified time limit and to ensure that the coating will not peel off for life. Buy kitchen tap directly from Likegro. Are All Three Hole Faucets The Same Size? 3 Hole Sink Faucet Not all 3 hole utility sink faucet is the same size, it needs to be sized according to the sink that is not in use. And usually, there is a standard hole size for kitchen and bathroom faucets is 13/8 inch, however, the size of the faucet hole can vary depending on the specific brand and model. How To Measure The three hole kitchen faucet Size? Calipers are one of the most commonly used measurement tools in the industry. We often use calipers to measure the length and width of objects, as well as the outer diameter of objects, the inner diameter and the depth of holes. In daily life, we can also use vernier calipers to measure the aperture of the faucet. Check the vernier caliper: whether the zero point is aligned, whether the parts are complete, and whether the sliding is smooth. When measuring the outer diameter, first push the ruler frame larger than the outer diameter of the object to be measured, and then measure. When measuring the inner diameter, first push the ruler frame to be smaller than the inner diameter to be measured, and then measure. Then comes the reading of dimension data. For more information about toilet hardware and square toilet seat, please feel free to contact us!
High Performance Naphthalene Superplasticizer For Concrete CAS No. 9008-63-3 Naphthalene superplasticizer Chemical name: �² Sodium naphthyl sulfonate formaldehyde condensate. Molecular formula: (c10h6ch2naso3) n, n is mainly 9-12. Joyreach Fdn Powder Naphthalene Water Reducing Admixture Superplasticizer for Concrete Package 25kg/50kg Naphthalene superplasticizer has good adaptability to various cements and improves the operability of concrete.FDN has the advantage of high water reducing ratio, non-delayed coagulation, non-air entraining and strong adaptability. It can improve the workability of concrete to a large extent so as to reduce the water consumption for blending. Meanwhile, it can improve the strength of concrete. It is widely used in concrete engineering: highway, railway, bridge, tunnel, power station, dam, high-rise building and other projects.It has good dispersion, water reduction and early-strength effect.Adding naphthalene series superplasticizer into ordinary concrete can improve the physical and chemical properties of concrete, improve the concrete strength, construction speed, project quality, technology and working conditions. 1. early strength admixture - improve construction progress; 2. retarding admixture - prevent cracking of large infrastructure such as airports and bridges; 3. pumping type admixture - transported by pump, such as high-rise buildings; 4. antifreeze admixture - used for winter construction. FDN-A High concentration product with sodium sulfate content no more than 5 percent. FDN-AI Middle concentration product with sodium sulfate content no more than 10 percent. FDN-AII Low concentration product with sodium sulfate content no more than 18 percent. FDN-23 sodium sulfate content no more than 23 percent,cheapest type to save cost. Usage method: --Powder 0.5%-1.0%, recommended dosage 0.75%; --Liquid is 1.0%-2.0%, and the recommended mixing amount is 1.5%. The mixing amount can be appropriately increased according to the grade of concrete. --Each batch of goods must be tested to meet the engineering requirements before use. 1. As the requirement of engineer,the dosage can be adjusted after testing. 2. It can be put into blender with mixing water,making mixing before concrete pouring,the plasticizing effect could be better.
High Performance Naphthalene Superplasticizer For Concrete CAS No. 9008-63-3 Naphthalene superplasticizer Chemical name: �² Sodium naphthyl sulfonate formaldehyde condensate. Molecular formula: (c10h6ch2naso3) n, n is mainly 9-12. Joyreach Fdn Powder Naphthalene Water Reducing Admixture Superplasticizer for Concrete Package 25kg/50kg Naphthalene superplasticizer has good adaptability to various cements and improves the operability of concrete.FDN has the advantage of high water reducing ratio, non-delayed coagulation, non-air entraining and strong adaptability. It can improve the workability of concrete to a large extent so as to reduce the water consumption for blending. Meanwhile, it can improve the strength of concrete. It is widely used in concrete engineering: highway, railway, bridge, tunnel, power station, dam, high-rise building and other projects.It has good dispersion, water reduction and early-strength effect.Adding naphthalene series superplasticizer into ordinary concrete can improve the physical and chemical properties of concrete, improve the concrete strength, construction speed, project quality, technology and working conditions. 1. early strength admixture - improve construction progress; 2. retarding admixture - prevent cracking of large infrastructure such as airports and bridges; 3. pumping type admixture - transported by pump, such as high-rise buildings; 4. antifreeze admixture - used for winter construction. FDN-A High concentration product with sodium sulfate content no more than 5 percent. FDN-AI Middle concentration product with sodium sulfate content no more than 10 percent. FDN-AII Low concentration product with sodium sulfate content no more than 18 percent. FDN-23 sodium sulfate content no more than 23 percent,cheapest type to save cost. Usage method: --Powder 0.5%-1.0%, recommended dosage 0.75%; --Liquid is 1.0%-2.0%, and the recommended mixing amount is 1.5%. The mixing amount can be appropriately increased according to the grade of concrete. --Each batch of goods must be tested to meet the engineering requirements before use. 1. As the requirement of engineer,the dosage can be adjusted after testing. 2. It can be put into blender with mixing water,making mixing before concrete pouring,the plasticizing effect could be better.
High Performance Naphthalene Superplasticizer For Concrete CAS No. 9008-63-3 Naphthalene superplasticizer Chemical name: �² Sodium naphthyl sulfonate formaldehyde condensate. Molecular formula: (c10h6ch2naso3) n, n is mainly 9-12. Joyreach Fdn Powder Naphthalene Water Reducing Admixture Superplasticizer for Concrete Package 25kg/50kg Naphthalene superplasticizer has good adaptability to various cements and improves the operability of concrete.FDN has the advantage of high water reducing ratio, non-delayed coagulation, non-air entraining and strong adaptability. It can improve the workability of concrete to a large extent so as to reduce the water consumption for blending. Meanwhile, it can improve the strength of concrete. It is widely used in concrete engineering: highway, railway, bridge, tunnel, power station, dam, high-rise building and other projects.It has good dispersion, water reduction and early-strength effect.Adding naphthalene series superplasticizer into ordinary concrete can improve the physical and chemical properties of concrete, improve the concrete strength, construction speed, project quality, technology and working conditions. 1. early strength admixture - improve construction progress; 2. retarding admixture - prevent cracking of large infrastructure such as airports and bridges; 3. pumping type admixture - transported by pump, such as high-rise buildings; 4. antifreeze admixture - used for winter construction. FDN-A High concentration product with sodium sulfate content no more than 5 percent. FDN-AI Middle concentration product with sodium sulfate content no more than 10 percent. FDN-AII Low concentration product with sodium sulfate content no more than 18 percent. FDN-23 sodium sulfate content no more than 23 percent,cheapest type to save cost. Usage method: --Powder 0.5%-1.0%, recommended dosage 0.75%; --Liquid is 1.0%-2.0%, and the recommended mixing amount is 1.5%. The mixing amount can be appropriately increased according to the grade of concrete. --Each batch of goods must be tested to meet the engineering requirements before use. 1. As the requirement of engineer,the dosage can be adjusted after testing. 2. It can be put into blender with mixing water,making mixing before concrete pouring,the plasticizing effect could be better.
Application The FSR-01 Shrink Force and Ratio Tester serves the purpose of measuring both the shrinking forces and shrinkage ratio of heat shrinkable films. These films are typically created through extrusion and stretching (hot drawing) during their manufacturing process, retaining this stretched state even after cooling. When the heat shrinkable film is reheated to the temperature at which the initial stress was introduced and subsequently fixed during its production, this stress is released, causing the film to contract or "shrink back." Depending on the specific manufacturing treatment applied, the film can be categorized as either biaxially oriented (stretched in two directions) or uniaxially oriented (stretched in one direction). Test Process 1. A well-insulated air oven is heated to the set temperature. The two samples are placed separately on two test stations, for shrinkage rate and shrink/contraction force testing. 2. A temperature probe is located to measuring area, to give result as reference temp. The air oven is driven down automatically to cover the sample area. The force and shrink rate are to be measured and the shrinkage temperature is reached when the maximum shrinking force is attained. 3. When this force has decreased by around 15%~30%, the air oven is lifted and time is recorded. 4. The assessment of shrinkage ratio is performed at the mean time. Technical Features 1. PLC Control and HMI Touch Screen: ensuring industrial-level stability. 2. Well-Insulated Air Oven: The air oven is excellently insulated and capable of automatic lowering and lifting, enhancing the precision of the testing. 3. Non-Contact Shrink Ratio Measurement: accomplished through a noncontact method, improving accuracy and reliability. 4. Real-Time Display:including shrinking force, contracting force, and shrinkage ratio, allowing for immediate analysis and monitoring. 5. Elimination of Interference Factors: Irrelevant interference factors like friction and cool air are effectively eliminated, ensuring the accuracy of the results. 6. Stable Heating System: The heating system is stable and well-balanced, maintaining consistent and controlled test conditions. 7. Easy Sample Loading: Sample loading is made easy, streamlining the testing process and reducing setup time. 8. High-Resolution Sensors: The system is equipped with high-resolution force transducers and thermometers, guaranteeing precise measurements. 9. Connectivity and Software:(optional) It includes an RS232 port for data connectivity and offers optional professional software for advanced data analysis and reporting capabilities. Standards: ISO 14616, DIN 53369 Main Parameters Force Range 5 N ( or as required) Accuracy ±0.5% Resolution 0.001N Displacement Range 0.1 ~ 95 mm Accuracy ±0.1 mm Temperature Range Ambient ~ 210C Accuracy ±0.5C No. of Specimens 2 Sample size 110*15 mm, L*W Power Supply 220V 50Hz
Atmospheric Plasma Cleaning System chain conveyor Environmentally friendly molecular-level surface cleaning enhances uniformity and hydrophilicity, making it an ideal pre-treatment for bonding processes. Product advantages: 1. Significantly improve surface hydrophilicity and enhance bonding 2. Remove surface oil, fingerprints and other organic contamination horizontally, 3. Board walking speed 2~5 meters/minute 4. Double-sided processing is possible, and equipment can be customized according to production capacity 5. Processing under atmospheric pressure, no special gas is required, and installation and use are simple Product Specifications: 1 Dimensions L*W*H:1200*1150*1150 - 1500mm 2 Power supply Single-phase 220V, 50/60HZ, 12A 3 Conveying method Roller conveyor, chain conveyor, belt conveyor 4 Working environment Temperature: -10~40, relative humidity: 50%~93% (non-condensing) 5 Plasma generator 500-700W adjustable; optional 700-1200W (high power version) High power version is suitable for 50mm and 70mm spray guns @25-40KHz 6 Working gas Water-free and oil-free compressed air; optional argon, nitrogen, etc. 7 Effective processing Width 500mm, double-sided processing (optional), the number of rotating nozzles is optional 8 Rotating spray gun Processing width diameter: 50mm, optional 70, 30, 20mm 9 Support plate thickness < 3mm (special specifications of thick plates require special customization of the equipment) 10 Processing speed 2.0m/min ~ 5.0m/min 11 Cooling method Air cooling, factory exhaust > 400m3/h 12 Control system PLC+HMI
100% waterproof gloves Description Prevent rain, snow, mud, sand and dirt from getting inside your gloves. Don't let bad weather ruin your outdoor tour! Three-Layer Construction Outer Layer: 82% nylon, 9% polyester, 8% elastane, 1% metallic yarn. Touch screen, tough wear-resisting, not bibulous, good elasticity. Middle Layer: 100% waterproof and breathable membrane. Inner Layer: 50% Coolmax, 41% nylon, 7% polyester, 2% elastane. Thermal comfort, soft skin touch. Highly Breathable 100% waterproof membrane pulls sweat away from the skin to keep your hands dry and comfortable in hot conditions. Moisture wicking Coolmax inner lining minimizes the bacteria and odor, keep feet comfortable and healthy. Touchscreen 3 fingers touchscreen: thumb, forefinger, middle finger. Note: When wearing the gloves, the fingertips can not be empty but need to be full so that they can better contact the phone screen and have the touchscreen effect. Pull out each finger part of the glove and then remove the glove from the hand. Also pay attention to the finger joints connecting 2 fingers, do not violently take off and cause damage. Be gentle on them to avoid damage to the waterproof layer and cause it to lose its waterproof effect. Good Grip Control Non slip silicone dots on fingers and palms offer better grip control. Perfect suitable for a wide range of work and activities with great dexterity. Activities Waterproof gloves are ideal for outdoor sports such as commuting, cycling, camping, hiking, hunting, fishing, golf, kayaking, skiing, skating, mountaineering, stream crossings, extreme races, etc. Great gifts for outdoor workers, oil workers, trainers, runners, hikers, backpackers, traffic police, army, postmen, woodmen and guides.
Product Details Short Description: (1)Pulp Material: wood Pulp (2)Coating: coated (3)Paper Material: white Kraft paper,brown Kraft paper in food grade (4)Coating Material: PE,PP,PVC,PET,OPP and so on. (5)Feature: waterproof,Grease-proof (6)Coating Side: single side or double side (7)Use:food wrapping, making paper cups,printing (8)Quantity Control: Paper Gram:+5%ï¼?PE Gram:12g, Thickness:5%,Moisture:6%-8%,Brightness:>78 (9)Bagasse pulp base and100% wooden pulp PE coated paper, Food Grade, eco-friendly. More advantages for our paper board PE Laminated on one side or two sides are allowed The base paper is virgin pure pulp unbleached Kraft paper board( top food grade in China market ) High thickness and low thickness is available ( 90g to 400g are popular Grammage ) Food grade raw material is safe, harmless, approved by food grade Security,barrier,non-leakage,moisture-proof, strong sealing Multi-layers lamination makes the bags high barrier against light, oxygen, moisture Strong sealing strength; bonding strength and excellent compression strength Our company advantages for you Top-quality in china market Good service always for you,7*24 hours Short date of delivery Small MOQ welcome and accepted Free sample for you to test the quality before top order. Packaging & Shipping Solutions: Die-cutting Service Cuts a roll of paper into sheets of uniform dimension: Fully Automatic High Efficiency High Precise Available in Various Different Shapes Solutions: Corrugating Service Available in E flute and F flute, two layerscorrugatedand three layers corrugated paper are available High Strength High Rigidity Extreme Durability Effective Protection Effective Heat Insulation Samples by Air Express(DHL,UPS,FedEx),Top order by Sea
Product: EN590 10PPM - Quantity: 50,000 MT - Price: $680 Net per MT FOB Fujairah (Tank to Tank or Tank to Vessel) FOB Procedure DIP & PAY Fujairah: 1. Buyer issues ICPO with full banking information along with full KYC. 2. Seller issues Invoice (CI) for the available quantity in the Sellerâ??s Storage Tank to the Buyer. Buyer signs and returns the CI to the Seller. 3. Buyer issues MT199 as proof of funds, CPA/TSA to Sellers account from prime 50 top bank/ bank to bank verification (companythat will send ICPO must be the same that will issue the MT 199, no JVâ??s with exits, or other agreement with end buyers accepted). 4. Seller presents the following documents to the Buyer to conduct Dip Test in Sellerâ??s tank: A. Unconditional Dip Test Authorization (DTA); B. TSR; C. Certificate of Origin. 5. Buyer conducts Dip Test in the Sellerâ??s Tank and upon successful Dip Test immediately provides the Seller with Q88 or valid verifiable TSR. 6. Seller signs NCNDA/ IMFPA with intermediaries for non disclosure and payment if commissions to be paid out immediately upon receipt of payment from the buyer. 7. Buyer issues 100% MT103/TT Wire Transfer payment to the Seller. 8. Seller signs Tank To Vessel Injection Agreement (TTVIA) or tank to tank (TTIA) to commence injection of product into the Buyerâ??s vessel or TSR FROM BUYER TO COMMENCE INJECTION OF PRODUCT TO BUYER'S TANK with Full coordinates. Seller transfers the Title of the product Ownership to the Buyer. 9. Buyer and Seller sign a long term contract for the consistent supply for a mutually agreeable quantities.
Acrylic resin impact modifier ACR 1.Introduction Impact modifier ACR-IM product line is a new generation of core-shell acrylic copolymer, the core layer of glass temperature is -50 - 55 The series of impact modifier-impact modifier and processing to improve performance in one, to increase the products of weathering and surface gloss, anti-aging properties, especially suitable for outdoor use products, widely used in the profile, non-transparent sheet, plate , Pipe, PVC pipe, and other indoor and outdoor products. 2.Physicochemical properties Specification Item IM-10 IM-20 IM-30 Appearance White freely flowing powder Granularity (percent of pass at 20 mesh) % 98 Volatility% 1.2 Apparent densityg/ml 0.40-0.55 Core glass transition temperature -50 -48 -55 3.Characteristics (1)Excellent weatherability. (2)Excellent impact resistance (3)Excellent processability 4.Use direction IM-10 has a normal processing performance and high resistance to impact and the need to use a small amount of processing aid; IM-20 has a high processing performance and better impact resistance and, without the use of a processing aid; IM -30 Do not have the processing performance, but with excellent impact performance, need to use of processing aid. 5.Recommended dosage Product Profiles Pipes fittings Plates Recommended dosage 6-7 6-9 3-6 6-7 6.Storage, packaging, transport This product is packed in sealed plastic bags and then put into weave bags, the bags with product certification, packaging bags external annotated: trademarks, manufacture, product weight.
Multiple Protections: Dry run protection Phase loss protection Overload/no load protection Short circuit protection Over-voltage protection Pump stalled/antiseizing protection Undervoltage protection Pump shaft rust protection Major Features: 1,Pressure control: electric contact pressure gauge or pressure switch 2,Water level control: probe or float switch 3,Multifunction display â?? visualization of: voltage, motor current, upper/lower tank status and alarms 4,Upper tank for water supply control and lower tank for drainage control 5,Operation mode: AUTO/MANUAL switch 6,Fault indication: fault tracking,last 10 fault reason display,audio/light alarms. 7,Anti-card protection,long-term non-use of the pump, 15 days to start once. 8,Setting protection current for motor overload/no-load,no-load delay restart time adjustable. 9,Automatic restart when voltage comes to normal rating after over-voltage/under-voltage protection. 10,Automatic restart after power failure recovery. 11,Time setting ON/OFF 12,Push button for adjustments and set up from display 13,Restore factory setting: press both "Overload" and "NO-Load"for 3 seconds. 14,Automatic re-starting pump from dry running,restart time range 0-999 minutes adjustable.
Multiple Protections:  Dry run protection Phase loss protection Overload/no load protection Short circuit protection Over-voltage protection Pump stalled/antiseizing protection Undervoltage protection Pump shaft rust protection Major Features: 1,Pressure control: electric contact pressure gauge or pressure switch 2,Water level control: probe or float switch 3,Multifunction display â?? visualization of: voltage, motor current, upper/lower tank status and alarms 4,Upper tank for water supply control and lower tank for drainage control 5,Operation mode: AUTO/MANUAL switch 6,Fault indication: fault tracking,last 10 fault reason display,audio/light alarms. 7,Anti-card protection,long-term non-use of the pump, 15 days to start once. 8,Setting protection current for motor overload/no-load,no-load delay restart time adjustable. 9,Automatic restart when voltage comes to normal rating after over-voltage/under-voltage protection. 10,Automatic restart after power failure recovery. 11,Time setting ON/OFF 12,Push button for adjustments and set up from display 13,Restore factory setting: press both "Overload" and "NO-Load"for 3 seconds. 14,Automatic re-starting pump from dry running,restart time range 0-999 minutes adjustable.
Multiple Protections:  Dry run protection  Phase loss protection Overload/no load protection  Short circuit protection Over-voltage protection  Pump stalled/antiseizing protection Undervoltage protection  Pump shaft rust protection Major Features: 1,Pressure control: electric contact pressure gauge or pressure switch 2,Water level control: probe or float switch 3,Multifunction display â?? visualization of: voltage, motor current, upper/lower tank status and alarms 4,Upper tank for water supply control and lower tank for drainage control 5,Operation mode: AUTO/MANUAL switch 6,Fault indication: fault tracking,last 10 fault reason display,audio/light alarms. 7,Anti-card protection,long-term non-use of the pump, 15 days to start once. 8,Setting protection current for motor overload/no-load,no-load delay restart time adjustable. 9,Automatic restart when voltage comes to normal rating after over-voltage/under-voltage protection. 10,Automatic restart after power failure recovery. 11,Time setting ON/OFF 12,Push button for adjustments and set up from display 13,Restore factory setting: press both "Overload" and "NO-Load"for 3 seconds. 14,Automatic re-starting pump from dry running,restart time range 0-999 minutes adjustable.
