Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail0.30mm Deviation of bidirectional cutting interfaces0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Galvanized Gabions Gabion baskets are rectangular mesh containers made of mildly tensile steel wire, welded or woven, galvanized, galvanized, golvanized, or plastic coated, for use in retaining wall structures filled with suitably sized rock or quarry stone for flexibility, durability, strength, permeability, economy, and landscaping. OEM Gabion Mesh Gabion baskets are rectangular mesh containers made of mildly tensile steel wire, welded or woven, galvanized, galvanized, golvanized, or plastic coated, for use in retaining wall structures filled with suitably sized rock or quarry stone for flexibility, durability, strength, permeability, economy, and landscaping. The gabions are subdivided into units by inserting diaphragms, which are mesh panels with the same characteristics as the outer side, spaced 1m apart from each other to give strength to the structure and to facilitate its rapid construction. Gabions can be manufactured from welded wire mesh or woven wire and are used in many situations, including stabilizing earth movement and erosion, river control, reservoirs, canal refurbishment, landscaping and retaining walls. Control and guide of water or flood flood bank or guiding bank preventing of rock breaking; Water and soil protection; Bridge protection; Strengthening structure of soil; Protection engineering of seaside area.
Railway Track Square Railway square ruler is a special measuring tool used to check the right Angle dislocation of railway track. Benefits 1. High accuracy:The structure is uniform, the linear expansion coefficient is minimal, the internal stress completely disappears, the ruler body is stable and does not deform. It can keep the perpendicularity between the ruler body and the rail surface â?¤0.05mm 2. Long service life: It is made of aluminum alloy, resistant to acid and alkali corrosion, not easy to rust, not easy to stick to dust, no need to grease, easy and simple maintenance 3. Stable insulation performance: one end is the insulated electric board and the other end is the plastic insulation sleeve. It can ensure the operating safely. 4.Customizable 5.The Measuring head is made of bearing steel: High hardness, not easy to rust and deformation 6.Multifunctions 1)Measure the switch angle steel whether is square when installed 2)Measure the internal lock switch parts whether is square when installed 3)Measure the switch rail whether creeping 4) Measure the sleeper whether square when installed.
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail0.30mm Deviation of bidirectional cutting interfaces0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM â?¥4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Check Valve Industrial Check Valve for Sale Trust BST Valves to provide you with high quality swing check valves and a variety of different check valves for all your backflow prevention needs. What is a check valve? Check valves are used to ensure that gases and liquids flow in only one direction. They essentially prevent the process flow from flowing back, thus forcing the valve to close. Correct flow pressure forces the check valve open, while reverse flow causes the valve to close. Flow check valves open at the designed minimum flow or cracking pressure so that the valve can begin operation. Check valves protect the system from pressure fluctuations that can cause damage to pumps and pipes and help operate efficiently. Check valves are required to stop backflow and protect rotating equipment and machinery from sudden backflow surges that may occur. BST Valves is a manufacturer specializing in check valves, offering industrial check valves in a variety of configurations and materials, including Cast Steel Check Valves and Stainless Steel Check Valves. Our check valves are industry proven for use in a wide range of applications from oil and gas to pulp and paper.
Railway Track Square Railway square ruler is a special measuring tool used to check the right Angle dislocation of railway track. Features 1. High accuracy:The structure is uniform, the linear expansion coefficient is minimal, the internal stress completely disappears, the ruler body is stable and does not deform. It can keep the perpendicularity between the ruler body and the rail surface â?¤0.05mm 2. Long service life: It is made of aluminum alloy, resistant to acid and alkali corrosion, not easy to rust, not easy to stick to dust, no need to grease, easy and simple maintenance 3. Stable insulation performance: one end is the insulated electric board and the other end is the plastic insulation sleeve. It can ensure the operating safely. 4.Customizable 5.The Measuring head is made of bearing steel: High hardness, not easy to rust and deformation 6.Multifunctions 1Measure the switch angle steel whether is square when installed 2Measure the internal lock switch parts whether is square when installed 3Measure the switch rail whether creeping 4 Measure the sleeper whether square when installed. PRODUCT SPECIFICATIONS Model LJFG-I Type Railway Track Square Material Aluminum alloy Size 1760mm Warranty 1 Year
Super Precision Bearings High precision bearings are utilized in applications where superior accuracy, reliability of operation, high running speeds, long life, rigidity and limiting of noise and vibration are critical. Super precision ball bearings are utilized on machine tools, such as turning centers, milling, grinders, machining centers and to support linear screw. Other super precision bearings applications include aircraft, medical equipment and robotics. For more linear motion bearing direct from linear bearing manufacturers, contact us. How Are Precision Bearings Made? Standard ezo precision ball bearings generally use stamped steel cages. Extra bl precision bearings, on the other hand, use cages made from stainless steel, bronze, or phenolic Cages made from these materials offer higher speeds and better loading capabilities. What Is A Precision Bearing Used For? With high running accuracy, high-speed performance and high system rigidity, SKF super-precision bearings are ideal for machine tools and other precision applications such as rolling mills, racing cars and marine vessels. The bearings also minimize noise, vibration and heat generation. As a super precision bearings srl, we provide masta precision housing, beemer bearings, ceramic precision balls, linear motion components, etc. For more information, please feel free to contact us!
EASY INSTALLATION OF FRAMELESS CABINET HINGE --No need to drill, use a phillips screwdriver to complete the installation. Please refer to Figure 4 for installation.(Note: The hinge is very stiff and requires the strength of the cabinet to close and open it. So please do not bend it with your hands before installation.) BUFFERING AND MUTE FUNTION -- Soft Close Damping Hinges built-in hydraulic mechanism which pulls the door closed for a smooth silent motion. MATERIAL -- The concealed cabinet hinges made of cold-rolled steel material and finished with nickel-plated enough to ensure durability and longevity. WIDE RANGE OF USES -- 90 degree kitchen cabinet hinge can be installed in 2 modes, Inset and Overlay. Widely used in various wood projects for home, such as cabinets, cupboards, bookcases. Ideal for door thickness from 0.6-0.85 inches. Technical Details Material:Stainless Steel Brand:HanYang Product Dimensions:4.4"L x 1.7"W Finish Type:Nickel Weight Limit:10 Pounds Unit Count:8 Count Manufacturer:HanYang Item Weight:2.05 pounds Color:Silver Style:Transitional Included Components:Screw Part Number:HY-HIN002
NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. PRODUCT SPECIFICATIONS Model NQGâ??5.8 Type Abrasive Rail Saw Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x 25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail 0.30mm Deviation of bidirectional cutting interfaces 0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Double walled Vacuum insulated technology keeps beverages cold or hot water bottle for 12 hours, Inner coating for better temperature retention. A unique Condensation & sweat / straw free thermal: No condensation on outer body even while carrying icy cold water completely sweat free. Leak proof & non-toxic: leak proof design, contains no toxins completely BPA and phthalate free. Thermal thermal water bottle that makes pouring completely hassle-free and spill-free, rust proof. Both its interior and exterior surfaces of this thermos have been fabricated using 18/8 quality stainless steel, making it rustproof products. It has a capacity of 500 ml and comes with a transparent drinking cup made of plastic which is suitable for tea hot flask. Package Contents: 1 vacuum flask set insulated double-walled Bottle, Color: Black, Material: Stainless Steel, Capacity: 500 ml, Size: 18 Ounce.
The scope of application Applied to the ships with the length 50m or above 50m as lamp signal liaison when night navigation. Products characteristic 1.The shell is made of high-strength engineering plastic PA+GF,the lampshade adopts injection of PC,lens hood adopts good quality stainless steel. 2.The signal lights have the whole seal structure,it is waterproof under the harsh environment. 3.The signal lights use exclusive LED illuminant which accords with ship rules and reguations,More energy efficient,longer working life. 4.The signal lights can work normally under the temperature -30~55 . Adopt standard GB/T 3028,MSC 253(8)resolution,THE INTERNATIONAL REGULATIONS FOR PREVENTINGS COLLISION AT SEA,1972 and GRADE ENTRY NORMS FOR STEEL SHIPS. Production patent Patent No:20172155879 Rated voltage AC100-240V 50/60Hz,DC24V Protection class IP56 Cable outside Diameter 10~12 Iluminant LED
YD-22III Smart rail tamping machine unit is a renewal product developed by our factory with new material and new technology. It has collected the tamping experience of users at home and abroad. It can do tamping works not only on the ballasted track of concrete sleeper type II and III in China, but also on various kinds of concrete sleepers and steel sleepers in foreign countries. This machine is suitable for tamping operation of different types of rails and concrete sleeper line after large and medium repair and sieving operations, and also suitable for tamping operation of ballast on newly built track bed. The equipment has superior performance, reasonable structure, safety and reliability, and high working efficiency. It fully meets the needs of railway ballast tamping operation. Specification Model YD-22III Type Hydraulic Rail Tamping Machine Material Stainless Steel Dimensions (L x W x H) (mm) 2580*2150*1950mm Engine 4-Stroke Gasoline engine Power 9.5kw RPM 3600r / m Hydraulic system pressure 5~6MPa Vibrating frequency 66.7Hz Exciting force 22KN Max . insert force 16KN Clamping force 6.5KN*2 Production efficiency 260 sleepers/ hour Weight 1385kg
NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x 25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail 0.30mm Deviation of bidirectional cutting interfaces 0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Railway Track Square Railway square ruler is a special measuring tool used to check the right Angle dislocation of railway track. Benefits 1. High accuracy:The structure is uniform, the linear expansion coefficient is minimal, the internal stress completely disappears, the ruler body is stable and does not deform. It can keep the perpendicularity between the ruler body and the rail surface â?¤0.05mm 2. Long service life: It is made of aluminum alloy, resistant to acid and alkali corrosion, not easy to rust, not easy to stick to dust, no need to grease, easy and simple maintenance 3. Stable insulation performance: one end is the insulated electric board and the other end is the plastic insulation sleeve. It can ensure the operating safely. 4.Customizable 5.The Measuring head is made of bearing steel: High hardness, not easy to rust and deformation 6.Multifunctions 1ï¼?Measure the switch angle steel whether is square when installed 2ï¼?Measure the internal lock switch parts whether is square when installed 3ï¼?Measure the switch rail whether creeping 4ï¼? Measure the sleeper whether square when installed. Specification Model: LJFG-I Type: Railway Track Square Material: Aluminum alloy Size: 1760mm
High carbon silicon granule is a new type of alloy, generally called silicon carbon alloy, or high carbon silicon,or high carbon ferro silicon, or HC silicon. Oxidation should shorten the reduction time compared with ferrosilicon powder and carbon powder. Reduce power consumption. Improve labor productivity. The decomposition and oxidation of silicon-carbon alloys is an exothermic reaction process . The positive pressure in the furnace is strong. It can provide the necessary conditions for deoxidation and sulphur. Reduce the sulfur content. The reduction period is shortened. Reduces the chance of inhalation of molten steel in the later stage. Reduce the growth of the H element and return to P. The quality of the molten steel is guaranteed. Reduce the amount of quicklime and fluorite powder added. cut costs. Reduce the concentration of harmful gases and smoke and pollute the environment. Conducive to the improvement of operating conditions. Foam slag is rich and active. At the same time, the bubble is wrapped with arc yellow to reduce arc radiation. Improve the life of the lining and the furnace cover. Reduced thermal shutdown time and consumption of auxiliary materials.
It's my pleasure to introduce our best quality products. I am Joe from EBLOCK manufacturer in Vietnam, we are producing and supplying AAC Block, ALC Panel, Lintel and supportive products with high quality and very good price. @We produce high quality AAC block as below specification: - Compressive strength: 3.5 - 5.0 - 7.5 Mpa - Fire Resistance: >3 hours based on the thickness - Sound Transmission Class (dB): 38 - 50 - Standard sizes (Length*Width*Thickness): 600-800*200-600*50-250mm @A specialized EBLOCK product with full waterproof ability, used for construction in places that are particularly sensitive to water such as skirting walls in bathrooms and toilets, with standard dimension (mm) 600*240*100. @We produce high quality AAC panel as below specification: - Compressive strength: 3.5 - 5.0 Mpa - Fire Resistance: >4 hours - Sound Transmission Class (dB): 38 - 50 - Standard sizes (Length*Width*Thickness): 1200-4800*400*75-250mm - Single steel mesh / double steel mesh
The Rail Rerailer Device is made of high-quality cast steel,consisting of left and right Rail Rerailer Device bodies,screws,and locking pins. It is suitable for trains on 60kg/m rail lines,which can be used to realign the derailed wheels caused by accidents.The Rail Rerailer Device is used to re-enter the track along the guide rail surface of the rerailer with the help of the locomotive's own power through the wheel tread and rim,thus achieving the purpose of self-rescue Place of Origin Hubei, China Type Railway maintenance equipment Material Stainless Steel Dimensions (L x W x H) (mm) 300*300*150mm Brand Name Linkage Type Railway tools Usage railway track maintenance Product name Railroad rerailer Application Railway maintenance Standard CRCC Color customized Suitable can be used for different kind of rail Certificate CE Warranty 1YEAR Customized Yes Packaging and delivery Port Shanghai Supply Ability Supply Ability 500 Unit/Units per Month
Features Stable operation & Higher wear resistance. High tensile strength & longer service life Self-Cleaning properties & Anti-Clogging properties Larger screening area & Cost Effective Shorter cleaning down-times & Quick and easy installation and removal. A wide range of screens available to suit any Equipment. Working on solving SCREEN "Plugging" "Blinding" "Wear & life" "Throughput"Reduce downtime Improve efficiency. CALVETTE High-performance Self-Cleaning systems increase screening efficiency. Technical advantages: Certain materials are blinding or pegging due to their humidity, plasticity or shape. This considerably reduces the production capacity of the screen and increases the downtime of the machine. To solve this problem, we have self-cleaning screens with crimped wire or polyurethane Elastomer, which vibrate independently from one another, being excited by the vibration of the machine and also by the weight of the material to be screened. This allows a noticeable increase in production and a longer life of the meshes. Solving â??Pluggingâ?? â??Blindingâ?? â??Wear & lifeâ?? â??Throughputâ??Reduce downtime Improve efficiency. These meshes also offer a higher 30% percentage of screening surface, which makes them highly recommendable for improving production capacity. Use high-quality, high-tensile woven wire mesh and MDI Polyurethane Elastomer. The high carbon steel and stainless steel used are vigorously controlled, therefore, ensuring a high-quality product.
The parameters of the steam milk bubble machine are as follows Model name: Steam Milk Brewing Machine Curing furnace capacity: 6L External dimensions: (mm) 235x 370x 490 Net weight of the body: 6Kg Voltage specification: 220V/50Hz, 110V/60Hz Boiler pressure: 1.5Kg Boiler material: 304 stainless steel Shell material: 430 stainless steel Probe function: It can be set to control the alcohol content of the heated liquid, and stop heating when the speed reaches a certain level. Overvoltage protection device 1. CEME pressure switch control imported from Italy 2. Mechanical pressure relief safety valve Waterless protection device The computer water level detection device does not heat the heating tube when there is no water. Leakage protection device Leakage circuit breaker and grounding device. Water inlet method: 2 water pipes, diaphragm liquid level detection, automatic control of electromagnetic coil water inlet.