ND-1 portable tamper is a special machine for ballast tamping on railway lines and turmouts. Choose high-vibration, high-power gasoline engine as power, with high output power and stable. performance. The air compression hammer impact pick is used to impact the ballat. The impact force is large and the tamping effect is good. The whole machin is smal in size, ight. in. weight, and convenient. to go up and down, which can ffectively guarantee driving safety during operation. Specification Model ND-1 Type Rail Tamper Material Stainless Steel Dimensions (L x W x H) (mm) 840*470*350 mm Engine Two- stroke petrol engine,1.6kW Rated RPM 4400 r.p.m Impact energy 30~40 J Impact frequency 22 Hz Fuel tank volume 0.95 L Weight 25 kg
YCD-2 hydraulic tumout tamping machine is a special mainenance mechanical equipment for railway turmouts. it is mainly used for tamping the seeper bllast in the tumout section, and can also take into account the tamping efect of the main track bed ballast. Specification Model YCD-2 Type Rail Tamping Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1420*660*1380mm Engine HONDA GX390 petrol engine Power 6.6 kW Vibrating frequency 60~70 Hz Exciting force 34kN Clamping force 9.4 kN Insertion force 2.9 kN Working pressure 5.0 MPa Tamping insertion depth: 90~ 120mm under sleepers Weight 337 kg
The machine is suitable for tamping operation on various rail and concrete sleeper track after the overhaul and medium ballast cleaning operation, and also suitable for tamping operation on the ballast bed of new track. This machine has the features of high quality performance, reasonable structure, reliable and high working efficiency, which will satisfy the requirement of ballast tamping operation. Specification Model YD-22 Type Rail Tamping Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1300 * 750 * 1600mm Engine Diesel Engine SF190 Power 7kW Vibrating force 22kN Vibrating frequency 66.7Hz Hydraulic system working pressure 5~6MPa Max insert force 16kN Max clamping force 6.5kN * 2 Production efficiency 270 pieces / (group hour) Inserting depth 110mm ± 10mm (underneath the sleeper) Weight 439kg
Formwork Solutions Concrete is one of the most versatile and widely used building materials in the world. It is used to build a variety of structures, from skyscrapers and bridges to monuments and dams. However, concrete cannot stand alone. It must be poured into a specific type of mold. This is where templates come in. What is formwork? Formwork is a mold for pouring and shaping fresh concrete. Formwork, which can be permanent or temporary, holds poured concrete and shapes it until it sets and becomes strong enough to support itself and other loads. Formwork is also called "shuttering". However, in some parts of the world, formwork refers to the use of plywood or wood to create molds. Formwork systems can be classified based on the following parameters: Type of material used to make the mold (plastic, steel, wood, aluminum) Types of concrete structures it supports (slabs, columns, walls)
The HFT Series is the best solution when designing large wheeled off-road machinery. With a compact design, high torque and load capacities, a negative multi-disk parking brake and an optional disengagement device to tow the vehicle in an emergency, these solutions precisely match the application requirements. Key features Compact structure High performance 3-7 Planetary wheels per stage Tapered roller bearings Structural parts in high quality forged steel Notchless ground tooth root Different ratios Integrated disc-brake High availability by highest teeth and production quality Specifications Torque range 2000 ... 180000 Nm 微信å?¾ç??_20240201135104.png Gear ratios 19 ... 365 Input speed up to 4000 rpm Main options Mechanical disconnect device
The machine is suitable for tamping operation on various rail and concrete sleeper track after the overhaul and medium ballast cleaning operation, and also suitable for tamping operation on the ballast bed of new track. This machine has the features of high quality performance, reasonable structure, reliable and high working efficiency, which will satisfy the requirement of ballast tamping operation. Specification Model YD-22 Type Rail Tamping Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1300 * 750 * 1600mm Engine Diesel Engine SF190 Power 7kW Vibrating force 22kN Vibrating frequency 66.7Hz Hydraulic system working pressure 5~6MPa Max insert force 16kN Max clamping force 6.5kN * 2 Production efficiency â?¥ 270 pieces / (group â?¢ hour) Inserting depth 110mm ± 10mm (underneath the sleeper) Weight 439kg
NLB-300 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, hook-bolt nuts, etc. High power petrol engine ensure large torque and high working efficiency. Specification Model NLB-300 Type Rail Impact Wrench Material Stainless Steel Dimensions (L x W x H) (mm) 1300*510*760mm Main shaft rpm 780r/min Max. loosen torque 300 Nâ?¢m Max. fasten torque 150 Nâ?¢m Working efficiency 10 pieces/min Petrol engine 1) Model: GX160 (2) Rated power: 4Kw (3) RPM: 3600r/min Weight 60kg
Single-side rail chamfering device is a special tool for eliminating the stress concentration at the sharp corner after rail drilling operation. It has the advantages of compact structure, simple operation, small size, light weight and convenient carrying etc. It is an indispensable tool in rail drilling works. Specification Model LJ-DJQ-D Type Rail Chamfering Tool Material Stainless Steel Dimensions (L x W x H) 180* 50*190mm Max chamfer diameter �¦ 31~�¦32 Max chamfer cutting torque Tmax = 10N â?¢ m Max moving forceh of handle rod Fmax = 55N (L = 180) Working efficiency 1 piece /10 seconds Overall size 180* 50*190mm Machine weight 1KG
Track jack a device for raising railway track during ballasting or other track operations. Mechanical track jack is the simplest & sturdiest types of the jacks and widely used in Oil Fields, Railway Track Work,Ship Yards, Mining Operation, Construction &Heavy Duty Industrial Maintenance & Establishments. These Track jacks can be used to lifting both on down and up strocks. They're not only be lowered tooth by tooth but also can be made to tripped off by just moving the trip control. Specification Model LJ-QD15 Type Rail Track Jack Material Stainless Steel Dimensions (L x W x H) 310*165*520mm Rated top lifting force 147HN (15T) Rated hook lifting force 78kN Lifting stroke â?¥270mm Initial height 60mm Weight â?¤25kg
NLB-300 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, hook-bolt nuts, etc. High power petrol engine ensure large torque and high working efficiency. Specification Model NLB-300 Type Rail Impact Wrench Material Stainless Steel Dimensions (L x W x H) 1300*510*760mm Main shaft rpm 780r/min Max. loosen torque â?¥300 Nâ?¢m Max. fasten torque â?¥150 Nâ?¢m Working efficiency â?¤10 pieces/min Petrol engine 1) Model: GX160 (2) Rated power: 4Kw (3) RPM: 3600r/min Weight 60kg
NLB-1800 Rail Bolt Wrench The NLB-1800 Rail bolt wrench is novel in design, compact in structure, small in volume, light in weight, strong in maneuverability, two-stage shock absorption of handle, portable in hand, convenient in getting on and off the track, especially suitable for the regional maintenance operation of track bed where turnout, tunnel, bridge and culvert and other large and medium-sized railway maintenance machinery cannot work. Specification Model NLB-1800 Type Rail Bolt Wrench Material Stainless Steel Dimensions (L x W x H) 830*280*380mm Petrol engine Two stroke petrol engine Rated Revolution 12000r / min Rated power 3.6kw Spindle speed 1130R / min Torque â?¥ 1800n. M
Place of Origin Hubei, China Type Electric Rail Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1200*420*900mm Brand Name Linkage Engine 2.2kW, 380V or 220V electric motor Grinding stone speed 2860 r/min Grinding stone specification 150*55*70mm Grinding stone feeding stroke 50mm Turning angle of grinding stone 90�° Weight 80kg Electric Rail Grinding Machine The design of FMG-2.2 electric rail profile grinder allows you accurate and stable profile grinding up to 90�°about the rail head by rotation of the machine using its turming device and its inclinable operating arm. According to customer needs, 380V three-phase motor can be selected as power or 220V single-phase power as power. With good visibility of the grinding area assures you of a high quality finish.
NZG31 Petrol Engine Rail Drilling Machine This machine is an indispensable tool for railway maintenance construction and emergency repair operations It uses a hollow drill bit a screw nut clamping mechanism with quick opening function fast clamping accurate positioning fast drilling simple operation and safety use Place of Origin Hubei China Type Rail drilling Machine Material Stainless Steel Dimensions L x W x H mm 800340400 mm Brand Name Linkage Product name Rail Cutting Machine Place of Origin Hubei Idle Rev 270rmin Borehole diameter 9836mm Power of petrol engine 12kW Spindle RPM 250 285 rmin Drilling time 25s Specification linear velocity 400 32 4 70m s Engine type fourstroke petrol engineHonda weight 17kg
Digital Rail Straight Edge Digital Rail Straight Edge is used for measuring vertical railway line rail abrasion and flank wear it includes reference positioning frame and installed on the framework of reference positioning auxiliary positioning screw and the depth of the rail vertical abrasion side abrasion measured in feet its structure is simple intuitive and accurate measurement data and upper and lower rapidly operator safety its light weight convenient to carry Benefits Digital Rail Straight Measuring Ruler has the advantages of high measuring accuracyeasy to operateLCD digital display etc Specification Model LJZDI Type Digital Straight Edge Material Carbon Steel Dimensions L x W x H 1201224 cm Measurement range 5 Indication error 006 Measuring length 1000
Digital Rail Corrugation Gauge Digital corrugation Wear Gauge is a direct reading measuring tool which is used straight vertical measurement methodIt is mainly used for measuring rail top surface and side surface corrugation wear value BENEFITS Its simple in operation compact in size easy to carry high precision in measurement reliable in installation and positioning simple in use ConvenientEasy to site construction ensure the quality of work Specification Model LJBMA Type Rail Corrugation Gauge Material Stainless Steel Dimensions L x W x H 1201224 cm Horizontal measure range 1000mm Vertical measure range 8 25mm Accuracy 005mm Resolution 001mm Repeat error 002mm Working temperature 5 40
Clay Brick Making Machines are the perfect choice to make solid and hollow clay bricks. This full steel design hollow clay brick making machine is designed to provide a long-lasting usage life and can process a variety of materials, including clay, shale, coal gangue, slurry, etc. The machine has an average weight of 18 tons and is the best solution for red bricks manufacturing. Its automatic clay brick making features help to save labor costs and maximize efficiency. The machine is also perfect for clay block making and can quickly produce high-quality products. Clay Brick Making Machines are reliable and efficient, making them the ideal choice for any clay brick manufacturing project.
Toothed roller crusher is used to crush small and medium-sized clay, shale, coal gangue and other raw materials. The distance between the rollers can be adjusted according to the required crushing particle size. The coarse roller crusher has two compression adjustment springs to prevent excessive or hard materials from entering and damaging the roller ring. Clay Brick Making Machines are made of high-quality steel box structure, which are fully automatic and have a one-year warranty. The clay brick crusher machine is suitable for producing red bricks and clay blocks. All of our products are CE/ISO certified, and their weight is about 4T. All of our products have excellent quality and reliable performance.
Model: HL-906 Size: L300 x W220 x H190mm Weight: 11kg Efficiency :40000-60000pcs / H Features: â?? Application: Tape resistors, diodes and other components forming the axial cut feet. â?? molding, cut the foot once completed, the processing ability. â?? molding span, foot length can be adjusted. â?? tool steel imported from Japan, long life. â?? can be installed, the folder on the desktop use; economy high. â?? Can U-shape (horizontal), F type (Vertical) (two forms can not be shared, required to indicate when ordering what kind of shape forming.) Another U-specific specifications for a US-based, specialized components for forming a smaller
TACTICAL FLASHLIGHT 2 IN 1 WITH MAGNETIC CHARGER Dobermann Pro is a model with narrow beam of light and smooth transition between hotspot and spill. The combination of a compact body and impressive light characteristics makes Dobermann Pro a 2 in 1 flashlight for tactical and day-to-day application. The flashlight with 1500 lumens brightness is best suited for solving tasks at medium distances of 100-200 meters (maximum distance of light is 368 meters). Dobermann Pro can be taken on long trips or to outdoor recreation. Like all models of the updated tactical lineup, this is a ready high-tech solution with supplied battery and magnetic cable for charging from any USB power source. Standard 1 inch diameter body allows the use of additional tactical accessories: any weapon mounts and original remote switches. For convenient everyday carry, the set includes durable nylon holster, steel clip and lanyard.
YDZTS-40C Rebar Taper Thread Cutting Machine is designed and manufactured by Hebei Yida Reinforcing Bar Connecting Technology Co., Ltd. 1. It is mainly used as a special equipment to make taper thread on the end of the rebar in the processing of rebar connection. 2. The applicable diameter is from �¯�¿� 16 to �¯�¿� 40. It applies to Grade �¢?�¡ and �¢?�¢ level rebar. 3. It has reasonable structure, light and flexible, simple operation, high production efficiency. It is widely used in steel bar end processing of taper thread joints in concrete works. 4. It adapts to a variety of complex construction site environment.
