Product Description Paraffin wax, also called 'paraffin', is a white, tasteless, odourless, translucent waxy solid. Paraffin wax is a type of wax that is derived from petroleum. Here are some key facts about paraffin wax: 1. Composition: Paraffin wax is primarily composed of long-chain hydrocarbons, specifically alkanes. These hydrocarbons are saturated, meaning they contain only single bonds between carbon atoms. 2. Physical Properties: Paraffin wax has a relatively low melting point, typically between 46°C to 68°C (115°F to 154°F), making it easy to melt and work with. It solidifies at room temperature.  Popular Products Our paraffin wax are kunlun brand from Petrochina (Fushun Petrochemical Company and Daqing Petrochemical Company).Mainly Products are fully refined paraffin wax, semi refined paraffin wax and crude paraffin wax with the melting point of 54/56/58/60/62/64.      (1)Fully Refined Paraffin Wax 58/60             (2)Semi Refined Paraffin Wax 58/60             (3)Fully Refined Paraffin Wax 56/58       (4)Fully Refined Paraffin Wax 60/62          (5)Fully Refined Paraffin Wax 64/66                (6)Crude Paraffin Wax 58/60   Product Parameters  Item Value Test method Grade #52 #54 #56 #58 #60 #62 #64 #66 Melting point, °C 52 54 56 58 60 62 64 66 GB/T 2539 54 56 58 60 62 64 66 68 Oil content, %(mass) 0.5 GB/T 3554 Color, Saybolt scale +27 +25 GB/T 3555 Max light stability 4 5 SH/T 0404 Penetration, (25°C),1/10mm 19 17 GB/T 4985 Kinematic viscosity, (100°C),m/s Report GB/T 265 Odor number 1 SH/T 0414 Water soluble acid/base Not detected SH/T 0407 Mechanical impurity & moisture Not detected Visual inspec
Product Name: Alpha Olefin Sulfonate (AOS) 38% Chemical Formula: R-CH=CH-(CH2)n-SO3Na CAS Number: 68439-57-6 Description: Alpha Olefin Sulfonate (AOS) 38% is an anionic surfactant widely used in various cleaning and personal care products. It is derived from alpha-olefins, resulting in a product that offers excellent detergency, emulsification, and foaming properties. AOS 38% is known for its mildness on the skin and its compatibility with other surfactants, making it a popular choice in formulations that require strong performance with minimal irritation. Appearance: AOS 38% typically appears as a clear to pale yellow liquid with a characteristic mild odor. Key Features: Superior Detergency: Efficiently removes dirt, oils, and grease. Excellent Foaming: Produces rich and stable foam, enhancing cleaning performance. Emulsifying Agent: Assists in the dispersion and stabilization of oils and other substances in water-based formulations. Mildness: Gentle on skin, making it suitable for personal care products. Biodegradable: Environmentally friendly and breaks down easily in the environment. Applications: Personal Care Products: Shampoos Body Washes Facial Cleansers Hand Soaps Household Cleaning Products: Dishwashing Liquids Laundry Detergents All-purpose Cleaners Industrial Cleaners: Industrial Detergents Vehicle Wash Solutions Hard Surface Cleaners Technical Specifications: Active Matter: 38% min Sodium Chloride: 7% Sodium Sulfate: 1.5% pH (10% aqueous solution): 7.0 - 9.5 Color (5% Am.aq.sol.): 50 Hazen Packaging: AOS 38% is available in various packaging options to suit customer needs: 200 kg HDPE Drums 1000 kg IBC Tanks Bulk Tanker Loads Storage and Handling: Store in a cool, dry place away from direct sunlight and heat sources. Ensure containers are tightly closed when not in use. Use appropriate personal protective equipment (PPE) during handling to avoid skin and eye contact. In case of contact, rinse immediately with plenty of water. Safety and Regulatory Information: Regulatory Compliance: Complies with REACH regulations and other relevant international standards. Safety Data Sheet (SDS): Available on request, providing detailed information on safety, handling, and emergency measures.
China overhead line fittings, crafted from iron or aluminum, secure and support conductors in power lines. Various hardware types include clamps for wire installation, hanging rings for insulator strings, crimping and repair tubes for wire connections, and spacer bars for split wires. In addition, cable fittings for pole towers are utilized. These components not only fix and support wires but also assemble suspension insulators into strings, connecting and hanging them on tower cross arms. Design and manufacturing considerations prioritize strength, stiffness, and wear resistance for long-term use. Selection and configuration of hardware must align with specific line conditions to ensure the safe and stable operation of overhead lines. Installation Guide for Overhead Power Line Accessories There are 5 steps for the installation of electrical overhead line fittings: Preparation and Planning: Conduct a comprehensive site assessment considering terrain, weather, and load requirements. Assembly and Inspection: Assemble fittings according to manufacturer guidelines, ensuring all bolts and connections are securely tightened. Lifting and Attachment: Lift and position assembled fittings onto poles or towers, using appropriate lifting equipment. Alignment and Tensioning: Verify alignment and adjust if necessary. Final Checks and Documentation: Conduct thorough quality checks, addressing any issues identified during the inspection. The components of an overhead line, a crucial element in power transmission and distribution, consist of a well-coordinated system of essential elements designed to efficiently transport electrical energy from generation sources to end-users. At its core, an overhead line typically comprises conductors, supporting structures, insulators, and associated hardware. Conductors form the backbone of the overhead line, serving as the pathway for electricity to flow. These conductors are often made of aluminum or copper, chosen for their excellent conductivity and durability. Supporting structures, such as poles or towers, play a critical role in elevating the conductors above the ground and maintaining the required clearance. The design and placement of these structures are essential to ensure the stability and reliability of the overhead line. Insulators, often made of ceramic or composite materials, are strategically placed to electrically isolate the conductors from the supporting structures, preventing unintended paths for current flow. This is crucial for maintaining the integrity and safety of the system. Additionally, associated hardware such as clamps, connectors, and fittings are employed to secure and connect various components of the overhead line, ensuring a robust and reliable transmission network.
Centrifugal Air Blower Centrifugal Air Blower For Sale Centrifugal air blowers adopt three core high-end technologies: "ultra high-speed direct connection motor", "air suspension bearing", and "high-precision single-stage centrifugal impeller", creating a new era of high efficiency, high performance, low noise, and low energy consumption fans. It is a new generation of high-tech civilian products developed with great dedication based on the design experience of aviation turbomachinery. Features 1. Energy saving and high efficiency The air suspension centrifugal blower uses air bearings, direct connection technology, a high-efficiency impeller, a permanent magnet brushless DC motor, and no additional friction. The fan automatically adjusts the consumption of motor power based on the output (adjustable range of air volume 40-100%) to maintain the high efficiency of equipment operation. 2. No vibration, low noise Adopting air bearings and direct connection technology, there is no vibration generated, and the fan does not need to be equipped with sound insulation devices; The equipment is lightweight and does not require a special foundation. The installation and layout are simple and flexible. 3. No lubricating oil The fan adopts air-bearing technology, and the system does not require a lubricating oil system, providing clean air to special industries such as electronics, medicine, and food. The operating temperature of the air bearing has reached 600 degrees, and all the drawbacks of the oil-based bearing system have been successfully resolved. 4. No maintenance Without the necessary gearbox and oil bearings for traditional fans, our series of high-tech impellers and motors are directly connected without couplings. The intelligent control system and key components use AL7075 (aviation aluminum). These technologies ensure that the equipment is maintenance-free, reduce maintenance costs for users, and improve the stability of the gas supply system operation. 5. Convenient operation control Self-checking and constant pressure operation, load/no load operation, overload control, and unmanned operation can be achieved on a personal computer for fan speed, pressure, temperature, flow rate, etc. The fan adjusts the flow rate by adjusting the speed of the impeller. Adjusting the speed can easily adjust the flow rate based on the temperature and pressure changes of the inhaled air. It can automatically and manually adjust the flow rate. 6. Small device installation space The air suspension centrifugal blower equipment is lightweight, small in size, easy to install, and can significantly save users on building and auxiliary electrical control system investment.
Iron Oxide Pigment Supplier Iron oxide pigment is the second largest inorganic pigment after titanium dioxide and the first largest colored inorganic pigment. It mainly contains iron oxide red, iron oxide yellow, iron oxide black and iron oxide brown pigments with iron oxide as the basic substance. In addition, more than 70% of all consumed iron oxide pigments are prepared by chemical synthesis methods, called synthetic iron oxide, such as green iron oxide, etc. ...... We can supply iron oxide pigments in various colors. Browse the products below to find the pigment you need, or contact us if you need help. We will help you select the right iron oxide pigment for your unique needs. What are the properties and advantages of iron oxide pigments High chemical stability and physical durability. Alkali-resistant. It is very stable to any concentration of alkali and other types of alkaline materials, especially cement and lime mortars commonly used in construction, without chalking or affecting the strength of cement building components. Acid Resistance. It is resistant to weak and dilute acids in general, but is also soluble in strong acids, especially when heated and concentrated. Light resistance. The color remains unchanged under strong sunlight. Heat resistance. It is stable within a certain temperature limit, beyond which the color begins to change. As the temperature rises, the degree of change becomes more pronounced. Weather resistance. It is unaffected by climatic conditions such as cold, heat, dry and wet. Dirty Air Resistance. It is stable in any dirty gas, such as hydrogen sulfide, carbon monoxide, sulfur dioxide, hydrogen chloride, nitric oxide and other gases. Water, oil, solvent resistance. Insoluble in water, various mineral oils, vegetable oils and organic solvents such as ether, ester, ketone, etc., and impermeable. Bright and clear color, unique hue. The color of iron oxide pigment is so clear and pure that it does not need to be embellished with other organic or inorganic pigments. Excellent economic efficiency. Iron oxide pigment has high coloring power, fine and uniform particle size, which ensures its value of use, together with lower selling price, it can ensure the economic effect of users.
At Hebei Turin, we pride ourselves on being a leading chemical supplier, dedicated to offering you the finest 1-Octadecanol (CAS 112-92-5)available on the market. Our commitment to quality is evident in the 99% purity of our products, ensuring that they excel in a wide range of applications. Our satisfied customers are a testament to our unwavering focus on selecting the best raw materials and maintaining strict process control. When you choose Hebei Turin as your 1-Octadecanol (CAS 112-92-5) supplier, you can rest assured that you are partnering with the best in the industry. With ample inventory and an annual production capacity of 30 tons, we are well-equipped to meet your long-term needs. In today�¢??s competitive market, we understand the importance of offering competitive pricing. At Hebei Turin, you will not only receive superior quality products but also enjoy more favorable prices compared to other traders. Are you interested in learning more about our products or making a purchase? Our sales manager, Tommy Li, is at your service to provide you with the information and solutions you need. Our team is committed to ensuring your satisfaction and helping you make informed decisions. Don�¢??t miss the opportunity to enhance your business with our exceptional 1-Octadecanol (CAS 112-92-5). Choose Hebei Turin for a partnership that delivers quality and reliability. 1-Octadecanol (CAS 112-92-5) is a long chain primary alcohol that is used in the production of emulsions, textile oils, antifoam agents, and lubricants. Other large scale applications include the manufacture of alkyl amines, tertiary amines, ethoxylates, halides/mercaptans, and polymerization stabilizers. It generally occurs as a mixture of solid alcohols whose primary constituent is 1-Octadecanol (CAS 112-92-5). It occurs naturally in sperm whale oil and has been isolated from the hyperthermophilic bacterium Pyrococcus furiosus. 1-Octadecanol (CAS 112-92-5) has been used to model the plant epicuticular wax layer for an investigation by differential scanning calorimetry and Fourier transform infrared spectroscopy. The use of 1-Octadecanol (CAS 112-92-5) to prepare microsphere formulations for such compounds as paclitaxel and indomethacin has been described.
RB1530-P steel plate and tube portable CNC plasma cutting machine is a multifunctional portable metal cutting equipment, which can be used to cut iron plate and round tube. Equipped with automatic height adjustment system, the cutting height can be automatically adjusted according to the bending degree of the plate. It can be directly placed on the steel plate to be cut, which is convenient and flexible to use. Steel plate and tube portable CNC plasma cutting machine features 1. The beam uses light structural design, with good rigidity structure, light deadweight and small movement inertia. 2. It can apply to iron sheet, the aluminum sheet, the galvanized sheet, hundred steel plates, metal plates and tube so on. 3. Its system supports the following languages: English, Russian, Spanish, French, Japanese, Czech, Slovak 4. It supports WENTAI, Astronautics HAIRE, ARTCAM software, Type3 produce standard G code way document, also can change software to read AUTOCAD software produce DXF form documents. 5.Overall processing alloy base, assure light and precise, no base shape deformation 6.Cross beam and rail both with linear guide, high accuracy good stability moving 7.With motor enable/disable button, ensure operator and machine safety and start position random select, save material save time. Steel plate and tube portable CNC plasma cutting machine parameters Model RB1530-P Working Voltage AC 220V/380V, 50HZ Plate cutting Size 1500*3000mm (5ft *10ft) (We supply customized service for you Specially!) tube cutting size 200mm, 300mm, 400mm, 500mm Supporting Cutting Flame and Plasma (Plasma Arc Cutting Equipment). Flame(gas) Cutting Gas LPG/Coal gas, Propane, Acetylene + Oxygen. Plasma Cutting Thickness 0-30mm,According to different power source Gas(flame) cutting Thickness 1-200mm Control System STARFIRE(FANGLING optional) Driving System LEADSHINE stepper motor Transmission Method Gear transmission Power Supplier HUAYUAN power or US HYPERTHERM Guide Rail Round rails Nesting Software FASTCAM
We are here to be your reliable partners of modified plastics. Engineering plastic is the high-performance plastic that can apply in different industrial areas, the higher mechanical strength and heat resistance of these modified plastics make them an excellent alternation of metal material. Compare to metal parts, engineering plastics are with lots of advantages, such as being weightless, significantly reducing noise, decay resistance, high durability, cold/heat resistance, flame retardant, etc. and are suitable for working in extreme environments. As a professional e engineering plastic supplier/manufacturer, we strive to know the needs and wants of our customers, ANMEI offers different types of engineering plastics - PA6 reinforce, PA66 reinforce, PC/ABS alloy, MABS, TPU FR and PP FR with glass fiber, these engineering plastics are with different performances to adapt to kinds of industries including 5G fiber optic cables, domestic appliances, automobiles, hardware appliances, new energy, clothing, machinery industry, electronics and electrical field. When the right engineered plastic is matched to the right application, the engineering plastic products usage will last longer and the overall performance will be better, making it more competitive in the market. How Could Anmei Engineering Plastics Become Your Choice Anmei, an experienced plastic products engineering company, will customize engineering plastics to meet the product performance or process according to the customer's product and mold structure. Providing customers with engineering plastic services such as consulting, product testing and analysis of engineering plastic material, sample trial production and process guidance. Implement the lean production management model of Japanese companies to reduce hitech plastics engineering production losses. While providing products with material performance comparable to those produced in Europe and the United States, it has a better price advantage. In order to ensure product quality and quality stability between batches, Anmei, a prime engineered plastics corp, uses German production equipment and the technical processes of fortune 500 companies and fully equipped testing laboratories for testing. What are engineering plastics? Engineering plastics are a group of plastic materials that exhibit significantly improved mechanical properties over a wide range of temperatures, loads and times. Especially long-term suitability at temperatures in excess of 90C to at least 150C is considered an important criterion of engineering plastic products. Therefore, all "high temperature" plastics are considered engineering plastics.
Medicinal aluminum foil is generally made of electrolytic aluminum with a purity of more than 99% and is rolled. Aluminum has the advantages of abundant resources, low price, and easy processing. When used as pharmaceutical packaging materials, aluminum foil is the only metal material in the packaging materials. Aluminum foil is non-toxic, odorless, has excellent electrical conductivity and light-shielding properties, has extremely high moisture resistance, gas barrier properties and taste retention properties, and can effectively protect the packaged items. It is a packaging material that has yet to be replaced. Commonly used alloy numbers for medicinal aluminum foil: PTP medicinal aluminum foil: PTP medicinal aluminum foil is also called medicinal plate aluminum foil and capsule aluminum foil. It is mostly made of 8011-H18 aluminum foil or 8011-O aluminum foil. Blister medicinal aluminum foil: Blister aluminum foil is also called cold-formed medicinal foil. It is mostly made of 8021-O aluminum foil and is used for high-end high-end airtight, moisture-proof and light-shielding pharmaceutical packaging. The thickness is 0.04-0.065 mm; Medicinal tropical aluminum foil: Tropical aluminum foil is also called aluminum-plastic aluminum. Tropical blister packaging is equivalent to adding a cold stamped aluminum foil cover on the outside of a thermoformed plastic blister and PTP aluminum foil. 8021-O aluminum foil and 8079-O aluminum foil are mostly used, which are high-end packaging aluminum foils for pharmaceutical packaging; Advantages of medicinal aluminum foil: 1. High-precision printing, rich colors and clear patterns; plain foil can be printed online on automatic pharmaceutical blister packaging machines. 2. It has excellent light-shielding, moisture-proof, oxygen-blocking, moisture-proof, chemical stability and fragrance-preserving properties. 3. The protective layer has excellent high temperature resistance, and the heat sealing layer has good heat sealing performance. It can be heat sealed to PVC, PVC/PVDC, NY/AL/PVC and other composite sheets with good sealing performance. 4. Aluminum foil is used as the base material, which is easy to push or puncture, making it convenient for consumers to take. The packaged blister board is easy to carry, easy to transport, store and prevent contamination. 5. Suitable for high-speed automated production, and can provide products with different width specifications according to the user's packaging machine model.
Product Description SPECIALIZED DIVERGE COMP DISC GRAVEL BIKE 2021 As the popularity of gravel riding soars, so does the technology, and the Specialized Diverge Comp Disc is a fine example of a gravel bike that's incredibly capable and versatile, fun to ride and race across a range of terrains, be that gravel, dirt or tarmac. The 9r FACT carbon frame and fork are strong, stiff and light, and use a progressive geometry for stability over the rough stuff and a responsive, agile ride feel. Future Shock 2.0 is an adjustable damper that absorbs impact and prevents you from feeling battered after riding over harsh or bumpy terrains, however when you hit smoother roads and trails, there'll be no compromise on speed. Frame Specialized Diverge FACT 9r carbon, SWATâ?¢ Door integration, Future Shock suspension, threaded BB, internal routing, 12x142mm thru-axle, flat-mount disc Fork Specialized Future Shock 2.0 with Damper, Smooth Boot, FACT carbon, 12x100mm thru-axle, flat-mount Bottom Bracket Shimano threaded Stem Specialized Future Stem Comp, with integrated computer mount Handlebar Specialized Adventure Gear Hover, 103mm drop x 70mm reach x 12-degree flare Bar Tape Specialized Roubaix S-Wrap Front Brake Shimano GRX 810, hydraulic disc Rear Brake Shimano GRX 810, hydraulic disc Brake Levers Shimano GRX RX810 Front Derailleur Shimano GRX RX810, braze-on Rear Derailleur Shimano GRX RX810, 11-speed Shift Levers Shimano GRX RX810, 11-speed mechanical shifting Cassette Shimano Ultegra, 11-speed, 11-34t Crankset Shimano GRX RX810-2 Chain Shimano Ultegra, 11-speed Front Wheel DT Swiss G540 rim, 24mm internal width, tubeless-ready, 24h, Specialized full sealed bearing thru-axle hub, Centre Lock disc, DT Swiss Champion 14G stainless steel spokes, DT Swiss brass nipples Rear Wheel DT Swiss G540 rim, 24mm inner width, tubeless-ready, 24h, Specialized full sealed bearing thru-axle hub, Centre Lock disc, alloy freehub body, DT Swiss Champion 14G stainless steel spokes, DT Swiss brass nipples Front Tyre Specialized Pathfinder Pro, 2Bliss Ready, transparent sidewall, 700x38mm, clincher Rear Tyre Specialized Pathfinder Pro, 2Bliss Ready, transparent sidewall, 700x38mm, clincher Saddle Specialized Body Geometry Power Sport, hollow Cr-Mo rails Seatpost Roval Terra carbon, 20mm offset Pedals Specialized Dirt
Miniature Circuit Breaker Automatic Assembly and inspecting line MCB Automatic Assembly and inspecting line Keyword: Miniature Circuit Breaker Automatic Assembly, Miniature Circuit Breaker, Automatic Assembly line, Assembly Machine, Assembly Production Line Product Introduction Basic operation process: ï?¼Loading by AGV robots, printing QR codes based on the product work order issued by the SAP system, and then separating the upper and lower shells. ï?¼Bottom coating of the upper shell: The installation of three components is completed through ten processes, and after each assembly is completed, there is a corresponding installation accuracy testing process to ensure that the assembly is completely qualified. ï?¼Installation of lower shell components, upper and lower shell assembly: A total of 25 processes are used to install 12 components. After each part is assembled, guide pins are used to ensure the upper and lower assembly. After the installation of internal components is completed, the product's on/off function is tested. After passing the test, rivets are installed, pressed again, and the screws are removed. All installations are checked, and after passing the test, they are transferred to the inspection station. ï?¼Unipolar products undergo instantaneous detection, delay detection, cooling tower and other unit inspections, and are then labeled with QR codes and covers before being transferred to the next workstation. ï?¼Multi pole products require 9 steps of multi pole assembly, and after assembly, a second delay is performed to verify the stability and reliability of the product ï?¼Finally, it is transferred to the automatic packaging unit through pressure resistance testing, transfer printing, laser labeling, and buckle installation. The specific parameters: (1) Equipment input voltage: 220V �± 10%, 50Hz; (2) The equipment has functions such as automatic shell loading, lid opening, assembly of arc extinguishing plates, magnetic guide plates, handle springs, base springs, positioning pins, handles, jump buckles, locks, coil components, iron core components, wiring columns, adjustment screws, arc extinguishing covers, CCD recognition, lid closing, identification of qualified and unqualified products, assembly of cutting processes, online detection, real-time monitoring, component life monitoring, data storage, MES system and ERP system networking, parameter arbitrary formula, smart energy analysis and energy-saving management system, intelligent equipment service big data cloud platform, etc. (3) Theoretical production effeciency: 2 seconds per unit; Daily production of approximately 14400 pieces/8 hours; (4) This device has the function of power-off to save data for 30 days, making it easy to manage production data; (5) This device adopts touch screen operation, has a computer communication interface, and printing function
Miniature Circuit Breaker Automatic Assembly and inspecting line MCB Automatic Assembly and inspecting line Keyword: Miniature Circuit Breaker Automatic Assembly, Miniature Circuit Breaker, Automatic Assembly line, Assembly Machine, Assembly Production Line Product Introduction Basic operation process: ï?¼Loading by AGV robots, printing QR codes based on the product work order issued by the SAP system, and then separating the upper and lower shells. ï?¼Bottom coating of the upper shell: The installation of three components is completed through ten processes, and after each assembly is completed, there is a corresponding installation accuracy testing process to ensure that the assembly is completely qualified. ï?¼Installation of lower shell components, upper and lower shell assembly: A total of 25 processes are used to install 12 components. After each part is assembled, guide pins are used to ensure the upper and lower assembly. After the installation of internal components is completed, the product's on/off function is tested. After passing the test, rivets are installed, pressed again, and the screws are removed. All installations are checked, and after passing the test, they are transferred to the inspection station. ï?¼Unipolar products undergo instantaneous detection, delay detection, cooling tower and other unit inspections, and are then labeled with QR codes and covers before being transferred to the next workstation. ï?¼Multi pole products require 9 steps of multi pole assembly, and after assembly, a second delay is performed to verify the stability and reliability of the product ï?¼Finally, it is transferred to the automatic packaging unit through pressure resistance testing, transfer printing, laser labeling, and buckle installation. The specific parameters: (1) Equipment input voltage: 220V �± 10%, 50Hz; (2) The equipment has functions such as automatic shell loading, lid opening, assembly of arc extinguishing plates, magnetic guide plates, handle springs, base springs, positioning pins, handles, jump buckles, locks, coil components, iron core components, wiring columns, adjustment screws, arc extinguishing covers, CCD recognition, lid closing, identification of qualified and unqualified products, assembly of cutting processes, online detection, real-time monitoring, component life monitoring, data storage, MES system and ERP system networking, parameter arbitrary formula, smart energy analysis and energy-saving management system, intelligent equipment service big data cloud platform, etc. (3) Theoretical production effeciency: 2 seconds per unit; Daily production of approximately 14400 pieces/8 hours; (4) This device has the function of power-off to save data for 30 days, making it easy to manage production data; (5) This device adopts touch screen operation, has a computer communication interface, and printing function
Functions & features Multilingual Support: Seamlessly operates in CHN, ENG, RUS, FREN, GER, PORTU, and SPAN. Synchronized 12-Lead ECG Acquisition: Ensures precise synchronous recording for accurate diagnostics. High-Speed Recording System: Equipped with a high-speed, high-sensitivity hot spot recording system and adjustable print trace depth function for enhanced accuracy. Vivid Display: Features a 7-inch high-definition, wide-angle color LCD screen with capacitive touch control, presenting a crystal-clear 12-lead display. Versatile Recording Modes: Offers six ECG record combination modes, catering to diverse diagnostic needs. Versatile Display Modes: Offers six ECG display combination modes, 3 channels/ (3+R) channels/dual-row 6-channels/single-row 6-channels/single/dual-row 12-channels. Comprehensive Diagnosis: Includes an accurate automatic diagnosis function, heart rate exceeding alarm, and customizable printing options for measurement and analysis reports. Effortless Data Input: Allows full keyboard touch input for seamless entry of hospital and patient information. Real-Time Waveform Analysis: Facilitates easy capture and analysis of crucial ECG waveforms with the real-time freezing function. Diverse Operating Modes: Supports manual, automatic, rhythm, and physical examination modes, ensuring versatility in clinical settings. Enhanced Connectivity: Features RS232, USB, and LAN network interfaces for seamless data transfer and connectivity. Extensive Data Storage:Utilize external large-capacity USB memory for storage, playback, and printing of historical data on computers. Reliable Battery Performance: Boasts a built-in, high-capacity lithium-ion rechargeable battery with specialized charging and protection systems for uninterrupted usage. Safety Features: Includes lead off and paper shortage detection functions for enhanced safety during operation. Adaptable Power Supply: Designed to accommodate wide power supply ranges (110-230V, 50/60Hz AC), ensuring compatibility in various environments. Expandable Memory: Easily expand memory capacity using a USB flash drive for added convenience. Benefits you will get: Seamless Connectivity: Easily connects to the ECG workstation, boasting robust patient file management capable of storing up to 500 ECG reports. Energy-Efficient Design: Incorporates a low power consumption mode, automatically transitioning into standby or shutdown after periods of inactivity, ensuring optimal energy use. High-Resolution Thermal Printing: Delivers high-quality thermal dot matrix printouts with baseline stability detection, guaranteeing consistently clear and pristine ECG waveforms. Secure Report Format:Saves ECG reports in an exclusive format accessible only through the ECG report browser (free) after being stored on a computer, ensuring data security and confidentiality.
Application The FSR-01 Shrink Force and Ratio Tester serves the purpose of measuring both the shrinking forces and shrinkage ratio of heat shrinkable films. These films are typically created through extrusion and stretching (hot drawing) during their manufacturing process, retaining this stretched state even after cooling. When the heat shrinkable film is reheated to the temperature at which the initial stress was introduced and subsequently fixed during its production, this stress is released, causing the film to contract or "shrink back." Depending on the specific manufacturing treatment applied, the film can be categorized as either biaxially oriented (stretched in two directions) or uniaxially oriented (stretched in one direction). Test Process 1. A well-insulated air oven is heated to the set temperature. The two samples are placed separately on two test stations, for shrinkage rate and shrink/contraction force testing. 2. A temperature probe is located to measuring area, to give result as reference temp. The air oven is driven down automatically to cover the sample area. The force and shrink rate are to be measured and the shrinkage temperature is reached when the maximum shrinking force is attained. 3. When this force has decreased by around 15%~30%, the air oven is lifted and time is recorded. 4. The assessment of shrinkage ratio is performed at the mean time. Technical Features 1. PLC Control and HMI Touch Screen: ensuring industrial-level stability. 2. Well-Insulated Air Oven: The air oven is excellently insulated and capable of automatic lowering and lifting, enhancing the precision of the testing. 3. Non-Contact Shrink Ratio Measurement: accomplished through a noncontact method, improving accuracy and reliability. 4. Real-Time Display:including shrinking force, contracting force, and shrinkage ratio, allowing for immediate analysis and monitoring. 5. Elimination of Interference Factors: Irrelevant interference factors like friction and cool air are effectively eliminated, ensuring the accuracy of the results. 6. Stable Heating System: The heating system is stable and well-balanced, maintaining consistent and controlled test conditions. 7. Easy Sample Loading: Sample loading is made easy, streamlining the testing process and reducing setup time. 8. High-Resolution Sensors: The system is equipped with high-resolution force transducers and thermometers, guaranteeing precise measurements. 9. Connectivity and Software:(optional) It includes an RS232 port for data connectivity and offers optional professional software for advanced data analysis and reporting capabilities. Standards: ISO 14616, DIN 53369 Main Parameters Force Range 5 N ( or as required) Accuracy ±0.5% Resolution 0.001N Displacement Range 0.1 ~ 95 mm Accuracy ±0.1 mm Temperature Range Ambient ~ 210C Accuracy ±0.5C No. of Specimens 2 Sample size 110*15 mm, L*W Power Supply 220V 50Hz
The FPT-01 Friction and Peel Tester is a versatile and multifunctional device designed for various applications: Measurement of Coefficient of Friction: It accurately measures both static and kinetic coefficients of friction for a wide range of materials, including plastic films, sheets, rubber, paper, paperboard, PP woven bags, fabrics, composites, and more. This capability is valuable for understanding how materials interact with each other and with various surfaces. Delicate Peeling Force Test: The tester can perform delicate peeling force tests on materials such as release paper, adhesive tape, medical adhesives, composite films, and protective films. This feature is essential for assessing the ease of separation between different layers of materials, ensuring product quality and performance. The FPT-01 Friction and Peel Tester is a versatile instrument that serves as a valuable tool for quality control, product development, and research in industries dealing with a wide range of materials, from packaging to medical applications. System Description FPT-01 Friction and peel tester has a fixed loadcell position, with a protection cover. A movable plane is installed firmly to ball lead screw. The sled is to put on sample sticking to the plane, which is then connected to loadcell, with a filament. When performing peeling test, as the force is small, the right sample clamp is stuck to plane, using double side type. Then a separation action is performed to peel the sample and force is recorded during the process. Technical Features FPT-01 Friction and peel tester is a PLC-controlled unit with industrial-grade stability and operates through an intuitive HMI touch screen interface. The precision ball lead screw mechanism ensures consistent speed and displacement control. The system offers two distinct testing methods: one for measuring the coefficient of friction (COF) and another for assessing peeling forces. In COF tests, precise free speed settings are available, while peeling tests consider parameters that influence peeling results, such as initial and tail portions. Other features 1. Real-time data analysis and display, including results and graphical curves. 2. Compliance with various test standards. 3. Integration of a dot matrix micro printer. 4. Inclusion of an advanced peeling program. 5. Optional RS232 and software. Major Standards ISO 8295, ASTM D1894, TAPPI T816, ISO 8510-2, ASTM D4917, ASTM D3330, TAPPI T549 Main Parameters Force Range 5N, 10N, or 30N (or others) Accuracy 0.5 F.S. Sled 200�±1g (or as required) Stroke 500mm Test Speed 1~500mm/min Power 110~220V 50/60Hz
Background Impact resistance plays an important role in the performance of material subjected to regular shocking load or impact load. As this kind of load may cause rupture, cracking or deformation. There are various test procedures to evaluate the impact resistance of a material, such as dart impact, ball impact, pendulum impact, izod, charpy, tensile, etc. Application Falling ball impact tester measures the resistance performance of plates, sheets, and composites, films foils, paper etc. with less than 2mm thickness. By impact test, the material ability to resist external destruction can be indicated. User observes the destruction status of the test specimen after it has been hit by a falling weight that fell from a given testing height. Test Method A steel ball of known mass and diameter is released from a predetermined height, creating a controlled impact force on the test specimen (film or plastic sheet). The impact energy and the resulting damage or deformation are measured and analyzed to assess the material's impact resistance. Factors Influence Result 1. Drop Height: The height from which the steel ball is dropped is a critical parameter that can be adjusted to simulate different impact scenarios. 2. Ball Size and Mass: The size and mass of the steel ball are selected based on the specific testing standards or application requirements. Technical Features The FBT-01 Falling Dart Impact Tester is a system with PLC control (maintaining industrial-grade stability) and is operated via an HMI touch screen interface. Key Features: 1. Precision PLC control and user-friendly touch screen interface 2. Adjustable impact height with a variety of available ball options 3. Display of test results in multiple units 4. Utilizes electromagnetic suspension for automatic ball release 5. Secure sample clamping through pneumatic mechanisms 6. Convenient manual and foot switch operation 7. Equipped with a dot matrix micro-printer 8. Option for advanced professional software (available as an add-on) Main Parameters Impact Height 300mm-600mm (can be extended) Ball Diameters(mm) 23, 25, 28.6, 38.1, 50.8(one equipped) Accuracy 0.1g (0.1J) Specimen Clamp Pneumatic Clamp Gas Supply 0.6 MPa 8 mm PU Pipe Specimen Size > 150 mm x 150 mm Power Supply AC 110~220V 50Hz
Background Given the extensive applications of mop materials in diverse settings, including homes, offices, and industries, rigorous quality testing is essential. While their ease of washing and high absorbency are valuable traits, consistent performance over time is vital. Quality testing ensures mops retain their absorbency and durability, upholding their effectiveness in tasks such as cleaning kitchen surfaces, windows, and furniture. This process identifies and addresses potential issues, maintaining the reliability and functionality of mops across various uses. Application COF-S1 is a specialized coefficient of friction tester for mop and cleaning materials like microfiber mop pads, sponge mops with foam blocks (cellulosic, rubber, or plastic). Friction varies based on usage for liquids, dust, and dry surfaces. The mop's friction coefficient affects its cleaning efficiency and usability. Excessive friction raises labor intensity, while too little hampers cleaning, thus requiring a balanced coefficient for optimal performance. Formula COF is determined by dividing the force needed to move one surface across another by the force perpendicular to the surfaces. It has two kinds: Static and Kinetic. Static COF �µs is measure of force required to begin movement. Kinetic COF �µd is measure of force required to maintain movement. Test Method Fix the sample cloth to its aluminum or plastic frame, then the total assembled part is placed under a certain weight. The block, together with the sample and its frame, is pulled at a speed of 500mm/min, for 500mm distance. The static and kinetic coefficient of friction are recorded. Technical Features COF-S1 Mop Cloth Coefficient of Friction Tester is a PLC controlled and HMI screen operated equipment with industrial level stability. Equipped with user designated test range, and with variable test speed, itâ??s ideal for mop manufacturers to control quality and develop new product. Key Parameters (customization Available) Force Range 100N Resolution 0.5%FS Speed Adjustable 1~1000mm/min Speed Accuracy 0.1mm/min Sled 100*100mm Sled Weight 225g�±1g Total Sample Weight 520g�±1g Stroke 500mm Loadcell Height 50mm Test Mode 5 groups Power 110~220V
COF-01 Coefficient of Friction Tester Background The coefficient of friction pertains to the friction present between two surfaces. A lower coefficient of friction signifies that less force is needed for sliding to commence, while a higher value indicates a greater force requirement. The coefficient of friction varies based on the specific materials involved. In the context of packaging film, the coefficient of friction refers to the extent of 'slipperiness' exhibited by the packaging material when in contact with different components of the packaging machine or other materials. The management of the coefficient of friction holds significance in enhancing performance and mitigating issues during the creation, transportation, and storage of packages. Numerous factors, such as antiblock additives, corona treatment, antistatic agents, inks, varnishes, and adhesives, can influence the coefficient of friction. Application The COF-01 Coefficient of Friction Tester is designed to measure both static and kinetic coefficients of friction for a wide range of materials. These materials include plastic films, sheets, rubber, paper, paperboard, woven and non-woven fabrics, metal-plastic composite belts used in communication cables and conveyor belts, wood, coatings, brake pads, windshield wipers, shoe materials, and tires. The tester can also be adapted or modified to accommodate various other material types and testing standards. Standards: ASTM D1894, ISO 8295, TAPPI T816, GB 10006 Technical Features The COF-01 Coefficient of Friction Tester has been aiding the flexible industry since its inception. 1.It employs PLC control and an HMI touch screen for interaction. The design, of industrial caliber, assures stability and extended service life. 2.The driving mechanism is powered by a stepper motor and a precision ball lead screw. 3.It exhibits real-time test curves, and automatically records maximum, minimum, and average test results. 4.Both static and kinetic coefficients of friction are gauged. 5.Compliance with multiple test standards is incorporated. 6.A dot matrix microprinter is integrated. 7.The test plane is constructed entirely from aluminum. 8.It offers RS232 output and professional software(Optional). 9.Local language display is supported(Customized). Main Parameters Load Cell 5 N(or as required) Accuracy 0.5 F.S. Sled 200�±1g (or as required) Sled Size 63.5mm*63.5mm (or as required) Test Speed 100mm/min (ISO), 150mm/min (ASTM) Dimensions 540mm(L)*380mm(W)*240mm(H) Weight NW 21kg Power 110~220V 50/60Hz
Product overview 1. It is composed of polysiloxane, dispersing agent, stabilizer, etc.; 2. It is highly compatible with foaming medium, with rapid defoaming speed and excellent bubble elimination performance; 3. It is easy to disperse in water. Technical specifications Appearance: White to yellowish emulsion pH value: 6ï½?8 Effective ingredients: 99% Performance characteristics 1. Dyeing at normal temperature in textile slurry; 2. Industrial water treatment, coating and pesticide defoaming; 3. Elimination of other aqueous phase bubble with quick defoaming as required; 4. For the oilfield drilling fluid defoaming, the reversion rate of slurry is close to 100%. Usage tips The antifoaming agent has excellent foam elimination and inhibition performance, and can be added to product after foam generation or as foam inhibition components. The additive amount of defoaming agent can be 10~100ppm. The optimal additive amount is determined by customers through test according to specific condition. Defoaming agent product can be used directly or after dilution. If the product can be fully stirred and dispersed in foaming system, and can be directly added without dilution. If it needs to be diluted, it can't be directly diluted with water, otherwise the layering, demulsification, etc. easily occur, thus influencing the product quality. For consequences generated due to direct dilution with water or process of use of the product in other incorrect methods, our company doesn't undertake the responsibilities. Packing and storage �· The product is packaged with 25kg, 50kg, 120kg or 200kg plastic bucket. In case of special requirements, the bucket can be customized through consultation according to the special requirements. �· Its storage temperature shall be at 5~30â??. It shall not be placed near heat sources or insolated in the sunshine. The acid, alkali, salt, etc. shall not be added to product. The container shall be sealed in case of non-use to avoid being polluted by harmful bacteria. If it is layered after being placed for a long time, it shall be stirred evenly, and its using effect isn't influenced. The product would not freeze below 0 . In case of freezing, its using effect isn't influenced after melting and stirring. The guarantee period of product at the suggested storage temperature and without sealing, lasts for 12 months from the production date.
Product Detailed Description: Limestone Dust Unleash the Power of Limestone Dust - Your Secret to Versatile Construction and Landscaping Introducing our premium Limestone Dust, a finely ground limestone product that opens doors to unparalleled versatility in construction and landscaping. With its remarkable qualities, this finely powdered limestone is a game-changer for countless projects. Key Features: Ultra-Fine Consistency: Our Limestone Dust is meticulously ground to an ultra-fine consistency, making it the ideal choice for a wide range of applications where precision is paramount. Exceptional Binding: The fine particles in our Limestone Dust ensure exceptional binding properties when mixed with other materials like sand, gravel, or cement, enhancing the structural integrity of your projects. Superior Workability: Achieve superior workability in mortars, concrete mixes, and stucco applications with our Limestone Dust. Its fine texture improves cohesion and minimizes voids. Diverse Applications: Whether you're a contractor, builder, or DIY enthusiast, Limestone Dust has a multitude of uses. It's a versatile solution for both interior and exterior projects. Applications: Mortars and Stucco: Create robust mortars and stucco mixes with excellent workability and bonding properties, ensuring flawless finishes for walls and structures. Concrete Mixes: Enhance the strength and durability of your concrete mixes, guaranteeing the long-lasting performance of your constructions. Soil Amendment: Improve soil quality by adding Limestone Dust to balance pH levels and enhance nutrient absorption in gardens and agricultural applications. Erosion Control: Utilize Limestone Dust for erosion control, stabilizing soil, and preventing sediment runoff in construction and landscaping projects. Decorative Concrete: Achieve stunning decorative concrete finishes with Limestone Dust, adding aesthetic appeal to your interior and exterior surfaces. Environmental Benefits: Our Limestone Dust is not only a high-performance product but also an environmentally responsible choice. It's sourced sustainably, minimizing the environmental impact during extraction. Additionally, its natural composition ensures it doesn't release harmful substances into the environment. In conclusion, Limestone Dust is your gateway to unparalleled versatility in construction and landscaping projects. From superior binding properties to impeccable workability, it's the choice that elevates your projects to new heights. Choose precision, choose adaptability, choose sustainability choose Limestone Dust to unlock the potential of your next project.
