According to potain technology; To equip crv moment motor for slewing mechanism; To use advance sand-blasted before painting; 6s managerial system to keep perfect details of our production and ccc safety guarantee. It's max. Working range 70m, hoisting capacity 12-16t, max. Hoisting height 203m, the tower crane have fixed type, inner-climbing type and rail-mounting type to fit for the tall building construction. Export packing by container
Max load 6t Jib length 45m Free standing height 49.36m mast section 1.6*1.6*3m or 2*2*3m tip load 2.2t Advantages: 1.The section of the jib is much larger than the standard topkit tower crane,hence the jib is more studier. 2.When there is need to place many cranes in one area,with over lapping jib,height of the 2nd crane required will only be 1-2Mtrs higher than the first crane.In normal cranes,this height needs to be minimum 9Mtrs. Container packing.
Topkit tower crane K30/30 Performance parameters: Model Topkit tower crane K30/30. Jib length 70m Max. load capacity 12t Tip load 3t Base type Stationary/Attached/Internal-climbing Hoisting height Free standing 51.7m Mast section 2*2*3m. Advanced technology are applied in the mechanisms and control systems, the tower crane has good performance,high reliability and easy maintenance. We offer frequency control on hoisting mechanism, slewing mechanism and trolleying mechanism as our standard equipment, which has many advantages such as excellent timing characteristics, stable start and stop, minor mechanical and electrical impaction, good positoning and high productivity and so on.
Qtp7427 topless tower crane Model: qtp7427 Maximum load: 18 t Maximum working range: 74m Tip load: 2.7t Working range: 3.8 to 74m Freestanding height: 49.7m Anchored height: 221.8m Derricking speed: 0-69m/min Slewing speed: 0-0.8r/min.
Model number: QTD125(TC4526) Maximum load: 10T Jib length: 45m Tip load: 2.65T Working range: 5 to 45m Freestanding height: 47.4m Anchored height: 162.2m Hoisting speed: 80/40 Derricking speed: 10.67m/min Slewing speed: 0 to 0.8rpm It can be widely used in large-scale, ultra-high type of civil construction, power plants, bridges, dams and other works.
We can offer all the type of tower crane. Exporting packing
1. QTZ63(5013)tower crane: Rating moment of lifting: 630KN. M. The max lifting capacity: 6t, the max jib length: 50m; 2. QTZ63(5013)tower crane: Fixed lifting height: 39-40.5m, can undertake 13-story or below buildings; Adhesion height 140m, can undertake 45-story or below buildings. 3. QTZ63(5013)tower crane owns two lifting points, level beam, upper rotating, hydraulic lifting, easy for installation and disassembling. 4. QTZ63(5013)6t tower crane use special motor and lows electric shock and ensure the leveling and stability. The QTZ63(5013)6t tower crane can also use three speeds motor. 5. The QTZ63(5013)tower crane adopt the technology of ODM series turning framework of POTAN French, the framework use the advanced electric and electronic technology, electromagnetism coupling and planet reducer infinitely timing, twisting moment large when starting, operate smoothly, advanced function. item Metric lifting moment KN.M 630 Max. lifting capacity T 6 Tip load capacity T 1.3 Working radius M 2.5~50 Hoisting height Independent M 40.5 Attachment M 120 Hoisting speed fall 2 4 Hoisting speed M/min 8.4 40 80 4.2 20 40 Max lifting capacity T 3 3 1.3 6 6 3 Slewing speed R/min 0.61 Trolleying speed M/min 21/42 Climbing speed M/min 0.5 Weight Independent structure T 31 Counter-balance T 12 Stationary structure T 35 Max. slewing radius M 51.43 Counter-jib slewing radius M 13.58 Max. working wind speed M/s 20 Climbing wind speed í_ M/s 13 Working environment temperature Degree -20~+40
Model:qtz125 basic height(m):50 maximum height(m):200 jib length(m):65 main specifications steel string(mm):12512514+ festival standard specifications(m):1.8351.8352.5
In very good conditions five years old. Loading at the tip 2.5 tons. 150 m mast with 50 m boom
¡ñ Installed with fixed legs and embedded bolts; ¡ñ The hoisting winch fitted with three-speed motor tocontrol speed for using; ¡ñ The slewing gear fitted with single-speed motor and fluid coupling to get smooth running; ¡ñ The trolley winch fitted with two-speed motor to get high stability; ¡ï The slewing gear(optional): fitted with RCV to get smooth running. Container
Cxt/800anti-collision and zone protection system Cxt/800 system protection Tower crane anti-collision protection If tower cranes are with the same height, this system can control and handle it effectively, once detecting that the running jibs interfere with each other automatically. While not with the same height, this system can also work effectively once acticipating the hook or cable of the higher tower crane may collide the jib or couter jib of lower one. Zone(obstacle) anti-collision Due to the complexity of some sites, the system can automatically and effectively determine up to 10 prohibited zones in which the hook or jib are not allowed to operate. Boundary protection Complicated environment usually exists around work site.The cxt/800 system can be preset with a up to 30-point boundary protection area in which the operating or over-flying of hook is not allowed. It can effectively prevent accielents from happening. Pre-alarm/alarm and control Cxt/800 system allows the operator to work at maximum efficient way and optimize the use of Crane. Once monitoring the pre-set data for possible collisions in crane interference area and over-flying of sensitise areas, there will be pre-alarm and visual and audible alarm and the system will stop the maneuver automatically to maintain a safety margin.
The main forklift we serviced are the chinese brand forklifts, including heli, hc, tailift, baoli, dalian, jac and so on. We also do the oem forklift spare parts made by customers samples. Export standard packing.
Technical characteristics: Safe load indicator JL-3000 uses industrial grade 5.7 inch LCD screen; Full patch design, waterproof, dust-proof, anti-vibration, small size and easy to disassemble; The casing is made of high-pressure cast aluminum material, beautiful, and the protection level is strong; Large-scale digital, analog CMOS integrated circuits, low power consumption; strong anti-interference ability, high reliability; The system has automatic fault detection function, which can automatically determine the fault location; The host adopts the touch button, long service life and high reliability; The system uses the latest modular integrated chip. Software can adjust the gain, the hardware without potentiometer, to solve the drift problem caused by the temperature change of the potentiometer, thus ensuring the stability of the dataï¼? With password setting to prevent parameter wrong settingï¼? With sound and light alarm functionï¼? Automatic compensation for sensors, 'temperature drift' and 'null drift'ï¼? With black box function, convenient to inquire any time.
Application Sensor applications for full safety monitoring of tower crane are embodied in the following areas 1)Tower crane installation. Crane foundation is the basic assembly unit, the practice has proved that major security incidents are due to the problems of crane foundation. Vigor sensors can measure the installation angle, during installation, vigor sensor can real-time detection, send the warning information in time. 2)The height of the tower crane automatically rise. During the automatically rise, after adding new steel frames, the operation room is still perpendicular to the ground or not will have a great impact on the safety. 3)Tower crane vertical lifting process. Measuring the bending angle and tilt angle of the swing arm, the tilt angle of crane. 4)Tower crane horizontal delivering process. Measuring the bending angle and tilt angle of swing arm, the tilt angle of crane. 5)In the heavy windy and rainy weather conditions, measure the swing angle of crane. Tower crane installation. The height of the tower cran e automatically rise. Tower crane vertical lifting process. Tower crane horizontal delivering process. In the heavy windy and rainy weather conditions, measure the swing angle of crane. Application of sensors: Tilt Beam sensor - High resolution, accuracy & stability - High safety remote signal transmission distance>500m - U-Shaped openings in both ending, easy to connect sensors - IP65protection - Alloyed & anodized aluminum housing, corrosion-resistant, wear-resistant, artistic SST20 low cost tilt sensor - Low cost, high performance, suitable for batch application - 50Hz refresh rate, 10Hz response frequency - 0.07accuracy@-15~50? -0.2% cross-axis error - Available to horizontal, vertical, headstand, etc installation methods - IP67protection - 9~36VDC power supply - Sensing elements survive to 1500g shock while operating SST810 dynamic tilt sensor - No drift, dynamic tilt measuring - Lowest cost, high performance - Built in MEMS tri-axis accelerometer and tri-axis gyroscope - Dynamic repeatability 0.5 - Highest refresh rate 1000Hz - X/Y/Z angular rate & acceleration data available - Autonomous working, do not need any external auxiliary - Mounted wherever needed
RC-A5-I load moment indicator is applicable to all types of level-jib and flat-top tower cranes.The system adopts 51 single chip and 5 inch LCD,it indicates real-time working state of tower crane and record,once overload,it will cut off circuit and prevent dangerous operation,ensure crane safety operation. It provides the operator with actual and correct information on working states of tower crane on as follows through LCD:actual load,rated load,hook height,hook amplitude,slewing angel and wind speed etc.If the load reaches 50% or 80% specified moment,it will pre-alarm.If it reaches 105%,it will alarm and prevent the trolley automatically from moving outward and the hook from lifting upward.
RC-A11-II integrated load moment indicator with anti-collision&zone protection system and remote online monitoring system.It indicates real time working states of tower crane and tower crane group both on tower crane and on the online computer.The system adopted full-touch mode of operation,and the most advanced ARM system,higher integration,greater precision data acquisition.The system can show the operator and manager the most comprehensive working states of tower crane in operation. At the same height:the system will auto detect and deal it with if any interference within running radius of slewing mechanism. At the different height:the system will auto detect and deal it with if any interference between higher hook and lower slewing mechanism. The system can set up to 10 different protection zones,prohibit flying over sensitive areas such as power lines,schools,highways,building etc.Try to achieve max.working area of tower crane within ensuring tower crane safety.
China-made tower crane: Loading capacity: 25t Jib length: 80m Standard height: 77m Max height: 322m Material: l180* 180* 18 ( angle stell welding) Standard mast section dimension: 2.45* 2.45* 5m Weight: 175t Totol power: 134t Max radius(m):80 Height(m):77 Max lifting load(t):25 Max height(m):322 Total power(kw):134 Weight(kg):175000
Used Luffing Type Tower Crane + Maker: Comedil + Model: CTL18-HD20 + Jib:55m + 9EA-3.75m Mast.
Model: QTZ63 (5013) Jib radius: 2.5~50m Maximum load: 3/6 ton(¦Á=2/¦Á=4) Tip load: 1.3 ton Freestanding hoisting height: 40m Anchored height: 150 m QTZ63ú¿5013ú¬ tower crane is ideal construction machinery for most architecture enterprises with convenient maintenance, safety application and appropriate price.
Fixed Tower Crane with Maximum Load of 2.5t and Working Radius Ranging from 2.5 to 35m Model Number:QTG25(3508) Key Specifications/Special Features: ò Jib radius: 2.5 to 35m ò Maximum load: 2.5t ò Load at jib nose: 0.8ton ò Radius with maximum load: 13.6m ò Freestanding hoist height: 25m ò Suitable for small buildings Container
