12.5-25micron, up to 1600mm, center fold or single sheet, printing and perforation is available carton, pallet, loose packaging
POLYOLEFIN SHRINK FILM: 3 layers, 12.5-25my, maxi. Width:1600mm, center fold and single sheet, printing patterns, hot slip, anti-fog and micro-perforation is available. We are the leading manufacturer of POF (polyolefin) shrink film in China. Our products have been sold well in more than 40 countriesí» markets with a high reputation and outstanding quality and service. Because we have 10 yearsí» experience and 6 advanced production lines we now plan to expand our business to a new proudct, 7 layers co-extrusion heat shrinkable highly barrier film, bags and tubing, will be used for packing poultry, chease, seafood, red meat such as lamb, beef and etc. carton, pallet, loose packaging
Environmentally Friendly type (POF) 5-Layer Co-extruded Polyolefin Shrink Film produced by our company are featured with high constriction ratio (over 60%), moderate air barrier property, flexible tenacity and hermetic sealing property,low-temperature resistance,non-brittle,damp-proof and anti-static.It is suitable for automatic or semi-automatic shrink pack machines.In addition,as much as 6 different color can be printed on the films.
Specification: Al(OH)3 99.5% Min Particle Size D50: 7.5um Max. Moisture 0.50 % Max Fe2O3 0.01% Max Applications: 1. Flame retardant filler for rubber, polyvinyl chloride, epoxy, unsaturated polyester, polyurethane, and polyolefin resins. 2.Pigment for coated paper, and filler for retardant paper. 3. Filler for china ceramic glaze. 25kg/bag
It uses polypropylene and rubber as the main raw material with various anti-oxidants, anti-aging and anti-UV additives. Advantage: 1. Excellent weather resistance, aging resistance, high tensile strength and elongation. 2. Wide temperature range from-40â?? to 100â??. 3. Good solderability and plasticity. 4. Eco friendly. Application: Basement, tunnel, grain depot, subway, reservoir, exposed roof, planted roof and driving roof. Specification: 1. Thickness: 1.2/1.5/1.8/2.0mm 2. Width: 2000mm 3. Length: 20m
Low Force and Low Temperature Shrink Polyolefin (POF) Shrink Film is keeps soft and thin products from deform or bend after shrink packaging. In addition, heat sensitive products can be packed through this film due to its low temperature shrinking property. Heat tunnels will cost less energy by running this film.prettylift innovative technology enables this film to minimize shrink force while with high performance. All prettylift 's shrink films have been tested by SGS according to REACH, FDA standards etc., and meet the regulations of contacting with foods. This film offers a varity advantages include: 1. Low shrink force; 2. High shrink performance at low temperatures; 3. Save energy of heat tunnels; 4. Extremely wide operating window; 5. High shrink machninery compatibitity.
- Product Name: Halogen-Free Polyolefin Flame Retardant /MH-HF800 - Advantages MH-HF800, is a halogen free environment-friendly flame retardant with N and P, non-APP based FR system. MH-HF800 has higher thermal stability and decomposition temperature. Test past: --UL94 V0 (0.75mm) --70 168hrs water-immersion (UL746C) --GWIT 750 --GWFI 960 --Free from the restrictions of RoHS Directive 2002/95/EC approved by the EU and the Council Besides, wires and cables with MH-HF800B can reach the standard of UL1581 VW-1. - Characteristics: Low density, Lower smoke generation, Less mold corrosion. Polyolefin with MH-HF800 have not the phenomenon of water-sliding surface during extrusion, and sieves can be added during the process. - Applications: PP, PP with GF, TPE, PE, XLPE wires and cables. - Specifications: Appearance: White Powder Density: 1.8±0.2 g/cm3 Phosphorous Content: 20.0-22.0% Nitrogen Content: 23.0-25.0% Water: 0.5% max Water Solubility: 0.5 g/100ml max PH: 3.0-4.5 Average Particle Size: 10 (D50) �¼m Decomposition Temperature: 270 min - Package and Storage 25kgs kraft bag with plastic lining or by customer requirements. Handle with care, keep air-tight and dry.
Dasheng DRS-1 tubings are flexible, flame retardant and have a shrink ratio of 2:1. The tubings are certified by UL/CSA. They are used for a variety of applications from insulation to bundling and mechanical protection. The tubings are rated for 125 Celsius and are available in black, white, blue, green, yellow, red and grey colours. Other colours are also available on request. Technical Data 1 Tensile Strength: 13 N/mm2 2 Ultimate Elongation: 350% 3 Heat Shock @ 250 Celsuis: passes 4 Cold Bend @ -30 Celsuis: passes 5 Flammability: passes 6 Dielectric Strength: 15kV/mm 7 Volume Resistivity: 1x1014ª+*cm 8 Longitudinal Change: Inside +/-5% 9 Water Absorption:
Antiblock masterbatch Product name: Antifabrillating/antiblock masterbatch. Product code: Ctc 80 r . Packing: 25 kg hdpe/pp woven sack. Carrier resin: Polyolefin blend. Additive: Calcium carbonate. Melt flow index: 40¦2 g/10 min(astm d- 1238 at 1900 c & 10 kg load) Application polymers: pp/hdpe Heat resistance: 3000 c at 5 min dwell time. During processing Non toxicity: The masterbatch is non toxic for use in plastics Health & safety: the masterbatch can be used safely in plastics, following a good mnufacturing practice. It is a non hazardous, machine friendly product. 25 kg hdpe/pp wooven sacks
Polyolefin Heat Shrink Film Polyolefin Heat Shrink Film, also shrink film, is a material made up of Polyolefin Heat Shrink Film. When heat is applied, it shrinks tightly over whatever it is covering Heat can be applied with a handheld heat gun (electric or gas), or the product and film can pass through a heat tunnel on a conveyor.
Polyolefin Heat Shrink Film We offer a wide range of LD shrink film Polyolefin Heat Shrink Film, which is available in different cuts, lengths and types. These Polyolefin Heat Shrink Film are extensively used for vegetables, fruits, food items, beverages and other FMCG products. Apart from ensuring safe packaging, our range also enhances the look of the products.
A cross-laminated polyolefin film HDPE Strength Films is made with high-strength film, a cross-laminated polyolefin film, which provides the tear-, burst- and puncture-resistant properties. Main Features: 1. High-strength film, a cross-laminated polyolefin film, which provides the tear-, burst- and puncture-resistant properties, the waterproof performance is better than a conventional film. 2. Solved the problem of wrinkle and burst after construction without padding HDPE polymer sheet. 3. The membrane, after technical processing, has a function of anti-ultraviolet, even prolonged exposure after construction; the appearance quality will not affected up to 6 months or so. 4. With a resistant of high and low temperature, the membrane can adapt to climate change of the hot and cold regions. Excellent elongation and tensile properties, the membrane also could be adapted to the deformation of base structure. 5. The membrane has a special puncture resistance, self-healing and continued tear resistance, and excellent water tightness. Applications: construction waterproof in basements, subways, tunn els, pools, roofing, underground garage, roof, planting greenery, roof garden z
Major client : Vehicle, Electric/Electronic company The product line : 1) PE/PU/PP Foam insulation tube type (Max : Internal diameter 200A) 2) PE/PU/PP Foam + Plastic film/Aluminum foil film molding laminating : Tube or Sheet type OK. 3) PE/PU/PP Foam + Bonding : Adhesion type laminating : Tube or Sheet type OK. 4) PE/PU/PP Foam Sheet type Usage : 1) Air-conditioner, Refrigerator's cold insulation 2) Vehicle's NVH 3) Cold/Hot insulation material
Brand: Chemprene Hardness: Shore A35-50D Advantage: ECO Friendly, Excellent weather resistance, competitive price, prime quality Processing methods: Extrusion, injection and blow molding Appreance: pellet granule Gertificate: ROHS, REACH, SGS, ISO Flame rating: HB V0 Application: automotive, cable&wire, building construction, electronics
Brand: Chemprene Hardness: Shore A35-50D Advantage: ECO Friendly, Excellent weather resistance, competitive price, prime quality Processing methods: Extrusion, injection and blow molding Appreance: pellet granule Gertificate: ROHS, REACH, SGS, ISO Flame rating: HB V0 Application: automotive, cable&wire, building construction, electronics
HIFLEX GREEN STICKS Hiflex green sticks are thermoplastic sticks used to make functional and relining impressions and it is used as a space maintainer.. Relining impressions Uniform plasticity Wide working area Indications -- Modify dentate tray by building up material where tooth has been extracted Make functional and relining impressions For border extensions on impression trays ideal for recording full depth of suclus
Inner Tube (Thermoplastic Elastomer),Reinforcement (1 or 2 layers of high pressure Synthetic Fiber braid),Outer Cover (Polyurethane),Color is black,other colors upon request,Temperature: from -40C up to +90CInner Tube (Polyester), Reinforcement (one or two layers of Synthetic Fiber with one special extra fiber braid), Cover (Polyurethane) ,Working Temperature:-40�ºC up to +60�ºC Color is Black, Orange or Blue,other colors upon request ,Application: Sewer cleaning, water jetting,etc. Length: 200 meters per roll, other length is upon requestThis section covers hose for use with petroleum base hydraulic fluidswithin a temperature rangeof- -40C~ +100c.
With rich experience in mold mould manufacture making building fabrication,such as plastic mold mould,injection mold mould,precision plastic injection mold mould,die casting mold mould,two-shot mold mould,over mold mould,insert mold mould,etc, TiPlas is a professional mold mould company mold mould maker in Shenzhen China which specializes in Design Engineering,Mold Mould Manufacture Fabrication Make Build,Injection Molding Moulding and Production for Plastics And Rubbers,Precision Machining for mechnical components mold inserts;for autos, cars,automotive components,auto parts,electronic products,connectors,gears,relays,etc,household appliances,sports leisures,medical devices,communication equipments parts etc. With a team of experienced mold mould tooling designers and skilled employees,we guaranttee your outsourcing offshoring mold mould tooling in high quality and strictly commit to DME Hasco Misumi DIN LKM mold mould tooling standards.
With rich experience in mold mould manufacture making building fabrication,such as plastic mold mould,injection mold mould,precision plastic injection mold mould,die casting mold mould,two-shot mold mould,over mold mould,insert mold mould,etc, TiPlas is a professional mold mould company mold mould maker in Shenzhen China which specializes in Design Engineering,Mold Mould Manufacture Fabrication Make Build,Injection Molding Moulding and Production for Plastics And Rubbers,Precision Machining for mechnical components mold inserts;for autos, cars,automotive components,auto parts,electronic products,connectors,gears,relays,etc,household appliances,sports leisures,medical devices,communication equipments parts etc. With a team of experienced mold mould tooling designers and skilled employees,we guaranttee your outsourcing offshoring mold mould tooling in high quality and strictly commit to DME Hasco Misumi DIN LKM mold mould tooling standards.
Thermoplastic External Nasal Splint Three sizes:5cm * 5cm, 7.5cm * 7.5cm,10cm * 10cm It is softened by immersion in warm temperature water, making it more closely conform to nasal dorsum of an individual user. Benefit It becomes soft faster when soaked in hot water of 65-70 degree, and also hardens faster when the temperature is lowered. Instruction for Use: 1.Apply skin closure tapes to the dorsum of the nose 2.Trim splint to correspond to the nose 3.Place a sheet in a hot water bath to make splint soft 4.Apply splint to the dorsum of nose 5.Apply skin tape to the splint to hold it to the skin 6.Keep the splint for 5days 7.Remove the splint and apply new splint for 2weeks
