We deal in best quality PVC White Regrinds, which are apt for numerous specifications of pipe, shoes sole, car, toys, bag, carpet, bathroom, medical, furniture, plug, electronic wire &cable series products and an assortment of PVC injection moulding products and so on. These products are applicable in various industries and are made of high quality material as well as advanced equipment. These PVC White Regrinds come with chemical resistance, high strength, uniform density, rigidity, high density and high melting point. Provided products are extremely demanded by our customers for their accurate composition, high effectiveness, high quality, and long shelf life. Product Details: Color White Application PVC PIPE Sources Grinding of PVC Pipes Shape Irregular Filler Content 4%, 8%, 10% Material PVC PIPE Grinding Usage PVC PIPE Min.Quantity 5,000 kgs. Pack Size varies We offer imported PVC pipe regrind with PHR < 7-8% in grey and white colours. This is regularly available. This is used along with virgin resin to bring down the cost. Mainly used for manufacturing pipes.
Polyethylene is the world's most widely used thermoplastic and is made by the polymerization of ethylene. Polyethylene is often classified by its density, because greater density corresponds with greater material rigidity. The world�¢??s largest volume polyethylene is high density polyethylene (HDPE), which has a relatively high degree of tensile strength. Plastic containers represent the most common household use of high-density polyethylene. At the opposite end of the spectrum is low density polyethylene (LDPE), which was the first type of polyethylene to be developed. Flexible packaging represents the most common household use of low-density polyethylene. Both high- density polyethylene and low-density polyethylene are also commonly used for moulding applications. Linear low-density polyethylene (LLDPE) can usually be manufactured at a slightly lower cost than low density polyethylene and has similar basic properties. While low-density polyethylene and linear low-density polyethylene are to a certain extent substitutable for each other, one may be more suitable than the other for a specific application.
Black LDPE granules is produced from European origin post industrial 60/40 and 80/20 grade raw materials. Standard process includes crushing, washing in three separate pools, agglomerating and extruding in two stages. MFI Range (190 -C 2,16 kg ) 0,80-1,00 g/10 min at 190 C 2,16 kg Density 0,91-0,93 g/cm3.
This product is one of the core offerings from CopperChem Industries, serving as a vital component for various industries. We have the privilege of supplying this product to renowned clients such as Global Oil Corporation, Petrochem Solutions, EnergyTech Services, ChemCo Enterprises, Advanced Catalysts Inc., AquaPure Technologies, EnviroChem Solutions, TechBuild Chemicals, and Innovate AgroScience. Our copper sulfate pentahydrate is in high demand across industries including Oil & Gas, Petrochemicals, Industrial, Water Treatment, Construction, Detergent, Coating & Resin, Agro, Textile, and Food. We provide flexible packaging options, ranging from IBCs, Drums, and ISO Tanks to Bags and Bulk Vessels." Price of product (USD or FOB price): USD Product Origin: Multiple Key Specifications/Special Features: This product holds a significant position in CopperChem's product portfolio, and it is supplied to our esteemed clients worldwide. To obtain detailed technical information such as the Technical Data Sheet (TDS), Safety Data Sheet (SDS), and Certificate of Analysis (COA), please reach out to our experienced sales team or visit our website.
Product pictures Properties: PP has the advantages of excellent comprehensive properties, good chemical stability, good shape processing performance and relatively low cost. PP can adapt to a wider range of application requirements through modifying, copolymerization, grafting,blending, reinforced filling, transparency, filling, weather resistance. Commonly used reference for Pp grade (due to market factors and production schedule, the actual model may be different, please contact us for specific grade confirmation) Category Grade MFI Density Major Applications Homopolymer - Extrusion F103 3.3 0.9 BOPP Film Grade - General Purpose, Lamination & Metallizable films T30S 3.3 0.9 Raffia Tapes ,Woven Sacks for Packaging Fertilizers, Cement, Polymers, Carpet Backing ,FIBC etc. T103 3.3 0.9 Thermoformed Cups, Containers & Other disposable items F110 11 0.9 TQ and Cast Films for General Purpose Packaging etc. Homopolymer â?? Injection Molding M103 3 0.9 General Purpose Injection Molding M106 6 0.9 General Purpose Injection Molding M108 8 0.9 General Purpose Injection Molding M110 10 0.9 General Purpose Injection Molding, Furniture etc. Impact Copolymer â?? Injection Molding M304 3.5 0.9 Automotive Components, Crates, Pails, Furniture etc. M307 7 0.9 General Purpose Injection Molding M310 10 0.9 Battery Boxes M311T 10 0.9 Compounding, Automotive Components, Luggage and Industrial Components M312 12 0.9 Compounding, Industrial Components, Automotive Components, Luggage, Pails, Houseware, Sanitary Wares etc. M315 15 0.9 General Purpose Injection Molding M325 25.0 0.9 Compounding, Automotive Components, Houseware, Appliances parts, Extrusion Coating M340 40 0.9 Appliance & White Goods, Automotive component, Compounding,TWIM Random Copolymer â?? Blow Molding B202S 1.9 0.9 Bottle & Containers for Medical and Transparent Products (e.g. IV Fluid Bottles) etc B200 1.9 0.9 General Purpose Blow Molded & Thermoformed Items, Sheets for Files & Folders. M212S 12 0.9 High Clarity Containers, Household items,Injection Syringe, Laboratory products & ISBM Bottles
Flavorless crosslinking agent BIPB peroxide series crosslinking agent Products commonly known as: BIPB, BIBP, odourless DCP, cross-linking agent BIPB, curing agent BIPB, BIPB, bridge agent BIPB, Vul-Cup 40KE, Luperox 802, Peroximon F 40MG, Perkadox 14SFI, Perperperyl PT, NORPEREROX BIPB-40C, Liandox VC-40C, Aceox BIBP 40C, Aceox BIBP 40C, OXANBIB, OXANBIB, ECILINK-40C BIK-40C, BIK BIS-40C, PBDP, PBMBDP, CCRIRIS 4588, EICSNECS246-246, Luperox-248-248, Luperperox-478-478, LuSP, LINKWELL BIPB Chemical name: di-tert-butyl peroxide diisopropylbenzene Molecular formula: C6H4 [C(CH3)2OOC(CH3)3]2 Molecular weight: 338Cas N0:025155-25-3 or 2212-81-9 Nature: It is insoluble in water and partly soluble in organic solvents such as ethanol, ether, benzene and carbon tetrachloride. The theoretical active oxygen content is 9.45%, the decomposition temperature is 182 C (half-life 1 minute), 118 - 120 C (half-life 10 hours). Purpose: This product can be used as crosslinking agent for chlorinated polyethylene, ethylene propylene terpolymer, ethylene vinyl acetate copolymer, silicone rubber, nitrile butadiene rubber, fluorine rubber and other plastics and rubber. Under the same crosslinking effect, the dosage of DCP is about 2/3, and the irritant odor in the operation process and the finished product is small. Packaging, storage and transportation: This product is packed in PE plastic bags with a net weight of 5 kilograms per bag and in cartons with a net weight of 20 kilograms per box. Storage temperature is normal, the product is not easy to deteriorate. Exposure and severe vibration should be avoided during transportation. Avoid heating, forbid mixing with strong acid and reducing agent. Quality indicators: Melting Point Temperature of Carrier with Appearance Content% of Series Products BIPB 96 Crystalline Powder 96 No 40-50 BIPB 90 White Powder 90 CaCO 3/ BIPB 40 White Powder 40 CaCO 3+Silica/
The rice milk soap contains Rice Extract, Cocos Nucifera Oil, Water Oil, and other components that have the following benefits: 1. Helps even out skin tone. 2. Helps moisturize skin without side effects. 3. Suitable for all skin types. 4. Helps prevent signs of premature aging. 5. Helps brighten and smooth the skin. - Ingredients: Coccos Nucifera Oil, Water Oil, Sodium Hydroxide, Propylene Glycol, Stearic Acid, Fragrance, Glycerin, Elaeis Guineensis Oil, Hexamethylindanopyran, Butylated Hydroxytoluene, Titanium Dioxide, Saccharomyces/Rice (Oryza Sativa) Extract.
Product Specification Power Range : 1.0 HP to 2.0 HP Operating Speed : 0 - 3100 RPM DC Power Range : 900 Wp - 2000 Wp DC Voltage Range : 70 Vmp - 110 Vmp Head Range : 30 Mtr - 90 Mtr Discharge Range : 8000 LPD - 30000 LPD Type of Duty : S1 - Zero Running Cost - Less Maintenance - Eco-Friendly - Simple Installation - Pollution Free Material Of Construction - Motor Part Grade Mechanical Seal : Graphite Ceramic Motor Shaft : Stainless Steel Motor Body Pipe : SS-304 Lower Hosing : Aluminum Diaphragm : High Nitrile butyl rubber Top Cap : Stainless Steel Bottom Plate : Stainless Steel End Cap : Stainless Steel MATERIAL OF CONSTRUCTION SCREW (HELICAL) PUMP Part Grade Outlet : SS-304 Suction : SS-304 Outer Shell : SS-304 Rotor Screw : Stainless Steel Stator : Rubber Coated Alloy MATERIAL OF CONSTRUCTION â?? CENTRIFUGAL PUMP Part Grade Check valve housing : SS-304 Check valve : PC Suction : SS-304 Outer Shell : SS-304 Impeller : POM Bowl : PC Pump Bush : NBR Pump Sleeve : Stainless Steel Pump Shaft : Stainless Steel Coupling / Pump Couple : Stainless Steel
Salient Features Highly efficient 3-Phase Water Filled Motor - 100% EC grade copper winding - Easily Rewindable - Motor Designed with Higher Cooling Effect Ensures Longer Life - Sustainable uniform performance for years - Ensures long life durability - Optimized Hydraulic & Mechanical Design - Improved efficient performance - Excellent output in Low Radiation - Dynamically balanced design - Zero maintenance Product Specification Power Range : 3.0 HP to 10.0 HP Operating Speed : 0 - 2890 RPM Operating Frequency : 0 â?? 50 Hz Input Solar DC Power Range : 3000 Wp, 10000 Wp Input Solar DC Voltage Range : 330 Vmp , 600 Vmp Head Range : 10 Mtr , 50 Mtr Discharge Range : 126000 LPD , 425000 LPD Type of Duty : S1 Material Of Construction Part Grade Oil Seal : Nitrile butyl rubber Motor Shaft : SS - 420 Motor Body : Cast Iron / J4 Motor Bush : LTB-4 / Teflon Thrust bearing assembly : SS - 420 & Carbon Base : Cast Iron Bracket : Cast Iron Flange : Cast Iron Casing : Cast Iron Impeller : Cast Iron
Butyl Acrylate Monomer (BAM) CAS Number 141-32-2 Formula C7H12O2 Butyl acrylate is an acrylate ester obtained by the formal condensation of the hydroxy group of butan-1- ol with the carboxy group of acrylic acid. Butyl acrylate appears as a clear colorless liquid with a sharp characteristic odor. Very slightly soluble in water and somewhat less dense than water. Used for making paints, coatings, caulks, sealants, adhesives. SPECIFICATION Purity 99.73 wt.% Color 5 APHA Water 0.01 wt.% Inhibitor (MEHQ) 100 wt ppm Acidity 6 wt ppm Specific Gravity (20/4C) 0.9 MAJOR USE: It is used commercially on a large scale as a precursor to polybutylacrylate, which is used in paints, sealants, coatings, adhesives, fuel, textiles, plastics, caulk. acrylic rubber, and emulsions. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
TBPB is an efficient initiator for the ethylene polymerization under high pressure in both autoclave and tubular processes,also suitable for crosslinking of EPDM rubber compounds at ambient temperature within some weeks.
4-tert-Butyliodobenzene,Appearance:light yellow liquid,CAS Number 35779-04-5,Linear Formula (CH3)3CC6H4I,Molecular Weight 260.11,assay 98%,bp :116-118 °C/9 mmHg(lit.
Product Name: Propan-1-ol Other Names: NPA, n-Propyl alcohol Cas No.: 71-23-8 Purity: 99% MF: C3H8O Appearance: Colorless liquid Package: Drum Certificate: ISO Application: It also known as n-propanol or 1-propanol, is a type of alcohol that is used for various purposes in different industries. It is a colorless liquid with a strong odor and is commonly used as a solvent, disinfectant, and chemical intermediate.
Product Name: Polyvinyl Chloride� � Other Names: PVC Cas No.: 9002-86-2 Purity: 99% MF: (C2H3Cl)n Appearance: free-flowing powder Package: bags Certificate: ISO Application: It is a versatile synthetic plastic polymer that is widely used in various industries for its durability, cost-effectiveness, and versatility.
Product Name: Methanol Other Names: MeOH Cas No.: 67-56-1 Purity: 99.9% MF: CH3OH Appearance: Colourless liquid Package: Drum Certificate: ISO Application: It has various industrial uses, it is also toxic and can be hazardous if not handled properly. Its use and handling are subject to regulations and safety guidelines in different industries and applications.
Other Names: EG Cas No.: 107-21-1 Purity: 99.9% MF: C2H6O2 Appearance: Clear, colorless liquid Package: Drum Certificate: ISO Application: It is primarily used in the manufacturing of antifreeze and coolant products. It is commonly used in industries and applications where heat transfer and freeze protection are important.
Product Name: Butan-1-ol Other Names: NBA Cas No.: 71-36-3 Purity: 99.5% MF: C4H10O Appearance: Colourless, refractive liquid Package: Drum Certificate: ISO Application: It is a primary alcohol commonly used as an industrial solvent and chemical intermediate in various industries. It has several applications due to its chemical properties.