Stainless Steel Powder Sinter Filters Suppliers and Manufacturers

Titanium & Stainless Steel Powder Sintered Porous Filter Cartridge & Plate & Disc.Produce+sales+transport

Sintered titanium filters are manufactured using 99.6+ % pure titanium powders. Depending on the desired filter morphology, the powders are compressed through isostatic pressing, uniaxial pressing, or roll-compacting. The resulting green body is then subjected to sintering in a furnace to produce the final sintered filter. The titanium rod filter element utilizes corrosion-resistant titanium rods, making it highly resistant to high temperatures and impacts. It is non-toxic, does not shed particles or adsorb liquid components, and offers a long service life (typically 4-5 years). The titanium rod filter element is easy to clean and renewable. It employs deep filtration, forming a dense filter layer with gaps on the surface of the titanium rod, effectively filtering particles. Additionally, particles smaller than the pore size of the titanium rod can be tightly captured on the channel walls, enhancing the filtration accuracy. The titanium rod filter shell is constructed from high-quality 316L or 304 stainless steel, featuring a mirror-polished interior and exterior. Specifications: Diameter: �¤60mm Length: 1000mm Filtering accuracy: 100�¼m Interface type: M30 interface (can be made as required) Technic: Sintering Filtration Principle When the filter medium enters the filter cartridge through the liquid inlet, impurities are initially trapped by the surface of the titanium rod, forming a dense filter layer. This filter cake layer contributes to the filtration process. Simultaneously, particles smaller than the diameter of the titanium rod's pores enter the micropores on the rod walls. The intricate and circuitous nature of these curved and slender pores, combined with fluid flow-induced extrusion and collision, facilitates effective particle capture. This deep filtration occurs within the titanium rod, as impurities are intercepted on its outer surface and inner wall. The filtered material exits through the outlet. As impurities accumulate within the filter cartridge, the pressure increases. Regeneration of the filter titanium rod is required once the pressure reaches 0.3MPa. Features of Titanium Filter Cartridge: Compacted pre-graded Titanium powder: Sintered metal filters are constructed using precisely graded titanium powder. This powder undergoes compaction and sintering, a high-heat process that bonds the particles without melting them. The result is a robust, porous metal structure with exceptional strength and filtration performance. Welded end-caps prevent filtrate bypass: Titanium filters feature integrally welded end-caps, eliminating the risk of filtrate bypass. This ensures that all fluid passes through the filter media, maximizing filtration efficiency and preventing contamination of the filtrate. This leak-proof design is essential for maintaining process integrity and achieving reliable results.

The sintered porous copper filter for gas vent, specifically designed for vacuum mold applications, is a highly efficient filtration product that ensures gas purity and enhances performance in vacuum molding processes. This filter is manufactured using a sophisticated sintering process, which involves fusing copper particles together to create a porous structure with interconnected channels. This production technique allows for precise control over pore size, permeability, and mechanical strength, resulting in a filter optimized for vacuum mold applications. Specifications: - Pore Size: 30-40 microns - Porosity: 30-40% - Dimensions: 8*10mm - Material: Copper powder Features: 1. Enhanced Gas Purity: The sintered porous copper filter effectively removes impurities and particulates from gas streams, ensuring a clean and pure gas environment in vacuum molding processes. 2. Optimal Filtration Performance: With its precisely controlled pore size and high filtration efficiency, the filter captures and retains even the smallest particles, preventing contamination and maintaining the quality of the vacuum mold. 3. High-Temperature Resistance: The filter is designed to withstand the elevated temperatures encountered in vacuum molding applications, ensuring stability and consistent performance. 4. Corrosion Resistance: Made from high-quality copper, the filter exhibits excellent corrosion resistance, allowing it to withstand corrosive gases and maintain its effectiveness over time. 5. Easy Integration: The filter can be easily integrated into existing vacuum mold systems, facilitating seamless installation and replacement. 6. Extended Lifespan: The durable construction and high-quality materials of the filter contribute to its long lifespan, reducing the need for frequent replacements and enhancing cost-effectiveness. Applications: - Plastic and Rubber Manufacturing: Used in vacuum molding processes for the production of plastic and rubber products, ensuring clean and pure gas environments for high-quality moldings. - Electronics Industry: Applied in vacuum molding applications for electronic components, maintaining a contaminant-free environment to ensure product reliability. - Automotive Industry: Utilized in vacuum molding processes for automotive parts, ensuring precise and high-quality moldings for optimal performance. - Medical Device Manufacturing: Employed in vacuum molding applications for medical devices, ensuring the purity and integrity of the molded products. - Aerospace Industry: Used in vacuum molding processes for aerospace components, ensuring the production of high-performance and reliable parts.

TOPTITECH's 30" SUS 316L Sintered Alloy Porous Filter Elements are crafted from premium SUS 316L stainless steel alloy, ensuring durability and reliability in demanding environments. The sintered alloy construction provides excellent resistance to heat, corrosion, and physical wear, making them ideal for challenging filtration applications. The linked pores in the porous structure of the 30" SUS 316L Sintered Alloy Porous Filter Elements facilitate the effective removal of pollutants. The large surface area facilitates optimal particle capture, ensuring high filtration efficiency while minimizing pressure drop. With customizable configurations available, TOPTITECH can tailor the pore size, thickness, and shape to meet specific filtration needs. Parameter Material: SUS 316L Length: 30â?? Diameter: 30mm Pore size: 15 um Wall thickness: 2.5mm Connector: 1/2â?? NPT Features Exceptional Durability: Our 30" SUS 316L Sintered Alloy Porous Filter Elements are constructed using high-quality SUS 316L stainless steel, ensuring unmatched strength and stability. These filter elements are designed to withstand demanding environments, offering long-lasting performance and reliability. High Filtration Efficiency: With a porous structure and interconnected pores, these filter elements provide efficient contaminant removal. The large surface area facilitates optimal particle capture, resulting in high filtration efficiency while minimizing pressure drop. This ensures effective filtration and maintains the overall efficiency of industrial processes. Robust Heat and Corrosion Resistance: The sintered alloy material of these filter elements provides excellent resistance to heat and corrosion. They can operate reliably in high-temperature environments and withstand the corrosive effects of chemicals, ensuring prolonged service life and consistent filtration performance. Customizable Configurations: We offer customizable configurations for our filter elements, allowing for adjustments in pore size, thickness, and shape to meet specific filtration requirements. This customization ensures that the filter elements are tailored to the unique needs of each application, optimizing filtration performance and achieving desired results. Wide Range of Applications: The 30" SUS 316L Sintered Alloy Porous Filter Elements find extensive use across various industrial sectors. Whether in petrochemical, pharmaceutical, food and beverage, or water treatment applications, these filter elements deliver reliable filtration solutions. Their robust construction and superior filtration performance make them a trusted choice for critical filtration tasks, ensuring clean and purified fluids while maintaining process efficiency.

Introduction: Porous Titanium Tube is crafted using industrial high-purity titanium powder (>99.6%) through a series of processes including powder classification, molding, sintering, and mechanical welding. The Porous Titanium Tube exhibits exceptional adaptability, allowing for adjustable porosity and filtration accuracy across a wide range. Featuring an open cell structure, Porous Titanium demonstrates great promise in the field of implant materials. Its remarkable attributes, such as a low elastic modulus, excellent bioactivity, biocompatibility, and the capacity for bone regeneration, make it an ideal choice for medical applications. At TOPTITECH, we provide a diverse range of Porous Titanium Tubes that cater to varying filtration precision requirements and dimensions. Additionally, our services extend to machining capabilities, enabling operations such as punching and cutting on sintered titanium tubes. For specific needs, we also offer Porous Titanium Tubes with one end closed. Specifications: - Material: Gr1 pure titanium powder - Filtration Precision: 30 Micron - Diameter: 150mm - Length: 40 inches (1000mm) - Porosity: 30-40% - Technique: Sintered Feature Porous titanium tubing offers high-temperature resistance up to 300�°C for normal use applications. It maintains strong mechanical properties with good plasticity, allowing for machining to customer specifications. This material demonstrates excellent corrosion resistance in harsh chemical environments. It can withstand oxidation and exposure to nitric acid, sulfuric acid, dilute hydrochloric acid, acetic acid, liquid hydrogen, and liquid nitrogen. Its uniform, stable pore structure coupled with precise filtration abilities delivers highly effective purification. No particle shedding occurs, preventing secondary contamination. The tubing also enables easy, repeated online cleaning through back blowing. Outstanding wear and impact resistance endow porous titanium with durable mechanical characteristics. Applications: 1. Chemical Processing: These filter tubes are used in chemical processing industries to remove impurities and ensure the purity of liquids and gases. 2. Petrochemical Industry: They play a crucial role in the petrochemical industry by filtering out contaminants and particulate matter from various fluids. 3. Pharmaceutical and Biotechnology: Porous titanium filter tubes are commonly used in pharmaceutical and biotechnology applications to achieve high levels of purity in drug manufacturing and sterile filtration processes. 4. Water Treatment: These filter tubes are utilized in water treatment systems to remove suspended solids, bacteria, and other impurities from water sources. 5. Food and Beverage: Porous titanium filter tubes find application in the food and beverage industry for filtration during the production of beverages, dairy products, and edible oils.

A semi-circular stainless steel sintered plate is a specialized type of porous metal filter that is shaped in a semi-circular form. It is made from stainless steel powder that is compacted and sintered together to form a rigid structure with interconnected pores. Parameters: Material: Stainless Steel 316L Filtration Rating: 20 microns(customizable) Shape: Semicircle (customizable to specific requirements) Thickness: 10 mm (customizable to specific requirements) Porosity: 30%-45% Operating Temperature: up to 600�°C Features: High Filtration Efficiency: Porous sintered 316L stainless steel filters are designed to provide high filtration efficiency. The filter's porous structure allows for the effective trapping and removal of particles, contaminants, and impurities from the fluid or gas being filtered. Excellent Chemical Resistance: 316L stainless steel exhibits excellent corrosion resistance and chemical compatibility. It can withstand exposure to a wide range of corrosive chemicals, acids, and bases, making it suitable for various applications in aggressive environments. Durability and Longevity: Porous sintered 316L stainless steel filters are known for their durability and long service life. The 316L stainless steel material offers high mechanical strength and resistance to wear, ensuring the filter can withstand demanding operating conditions and extended periods of use. Temperature and Pressure Resistance: These filters are capable of operating at high temperatures and pressures. Stainless steel 316L can withstand elevated temperatures, typically up to 600�°C or higher, without significant degradation. It also maintains its structural integrity under high-pressure differentials. Applications: Chemical Industry: Filtration of corrosive liquids, catalyst recovery, removal of particulate matter from process streams. Pharmaceutical Industry: Clarification of pharmaceutical solutions, sterile gas filtration, purification of process fluids. Food and Beverage Industry: Filtration of beverages, edible oils, food products, and removal of impurities. Petrochemical Industry: Filtration of high-temperature gases, removal of contaminants from oils and fuels. Water Treatment: Filtration of wastewater, removal of suspended solids, and purification of process water. Automotive Industry: Filtration in engine oil and fuel systems for improved performance and longevity. Electronics Industry: Filtration of electronic solutions, removal of microcontaminants in semiconductor manufacturing.

The sintered conical wire mesh filter strainer is meticulously crafted from stainless steel sintered wire mesh through precise cutting and welding techniques. The utilization of a rolling seam welding process guarantees exceptional roundness and flatness. Thanks to its cone-shaped design, the sintered cone filter offers superior diversion, separation, and filtration capabilities. Tailored to meet customers' preferences, the bottom of the stainless steel sintered mesh cone filter can either be flat or pointed. Whichever configuration is chosen, this filter exhibits remarkable dirt-holding capacity, making it a popular choice for three-in-one filtration purposes encompassing filtering, washing, and drying applications across various industries such as chemistry, food processing, beverage, and pharmaceuticals, among others. Parameters Material:� 316 L stainless steel, 304 stainless steel Filtration precision:� 1 micron to 300 microns Size:� as the drawing required Features Superior Filtration: The cone design maximizes the filtration area, enabling a larger filtration surface compared to other filter shapes. This expanded surface area enhances the filter's capacity to capture and retain particles, resulting in more effective filtration. Enhanced Mechanical Strength: The sintering process employed in manufacturing the filter significantly enhances its mechanical strength. Sintering involves compacting and bonding the stainless steel particles at high temperatures, creating a solid and robust structure. Enhanced Diversion: The conical shape allows for better diversion of the fluid or gas flowing through the filter. It promotes a more efficient flow pattern, ensuring that the medium being filtered is evenly distributed across the filter surface. Versatile Applications: The cone-shaped filter finds wide application in various industries, including chemistry, food processing, beverage, and pharmaceuticals. Its versatility lies in its ability to perform three essential functionsâ??filtering, washing, and drying. Applications With regards to water treatment, sintered wire mesh cone filters efficiently remove impurities, sediment, and contaminants from water sources, ensuring clean and purified water for various applications. In gas filtration within fluidized beds, these filters effectively capture and separate particles, ensuring the optimal performance of the fluidized bed system. Additionally, their exceptional cleanability makes them ideal for use in sterile product environments, maintaining high levels of cleanliness and hygiene.

Product Introduction Bronze powder sintered filter elements are created by sintering bronze alloy powder at high temperatures. They exhibit high filtration precision, good air permeability, high mechanical strength, and excellent suitability for high working temperatures and impact resistance. These elements find application in various fields, including pneumatic components, the chemical industry, and environmental protection. TOPTITECH produces porous filter tubes that can be hollow or blind, with a minimum wall thickness of 1 mm. The tubes are made by isostatic compaction of powder in a flexible mold with the negative shape of the part, followed by sintering. The pore sizes can range from 0.2 to 100 microns. These filters find used as filter cartridges or aerators for high flow rates. They can be utilized as tubes straight away or with connectors of different geometry added at the ends. Porous elements of various shapes, structures, different particle sizes, and porosity can be produced according to user requirements. Examples include covers, caps, sheets, tubes, and rod-shaped filter elements. Parameter Filter material: Bronze powder Pore size: 30 microns Porosity: 30%-50% Filter length: 80mm Outer diameter: 50mm Features Efficient filtration: The porous structure of the bronze filter allows for efficient filtration of liquids and gases. High-temperature resistance: The bronze filter can withstand high temperatures, making it suitable for use in high-temperature environments such as the chemical and petrochemical industries. Corrosion resistance: The bronze filter is highly resistant to corrosion, making it ideal for use in corrosive environments such as the marine and oil, and gas industries. Durable: The sintering process used to create the bronze filter results in a durable material that can withstand harsh operating conditions. Applications Fluidized bed: Porous bronze filters are used in fluidized bed reactors to remove impurities and maintain a consistent fluidized bed. Chemical industry: Porous bronze filters are used in the chemical industry to filter and separate chemicals for various applications. Oil and gas industry: Porous bronze filters are used in the oil and gas industry to filter impurities from crude oil and natural gas. Marine industry: Porous bronze filters are used in the marine industry to filter seawater for various applications. Automotive industry: Porous bronze filters are used in the automotive industry to filter oil and fuel for internal combustion engines.

316L Five-layer sintered mesh filter disc is a highly durable and efficient filtration material that is created by bonding together five layers of wire mesh  with varying openings and diameters through a process called sintering. This process involves bonding the contact points of the� wire meshes� together in a vacuum, resulting in a seamless, porous material with� enhanced mechanical strength, high permeability, and superior structural integrity. The sintering procedure boosts the mechanical strength of the coarser support layers while maintaining the filtration rating of the finest mesh layer. Additionally, heat and pressure are used to create molecular diffusion welds at every intersection of the wire mesh, further improving the temperature and pressure resistance of the sintered mesh. 316L Five-layer sintered mesh filter disc is widely used in gas distribution,� polyester filtration, water treatment, and other applications where reliable and high-quality filtration is required. Parameters Material:� Stainless steel 316 L Filtration accuracy:� 50 microns Heat resistance:� 600 �°C Size: Diameter95mm*Thickness6.0mm Features Exceptional Mechanical Strength and Stability: The sintering process creates a seamless, integrated material that offers unparalleled mechanical strength and stability, making it highly resistant to wear and tear. High Permeability: The porous nature of the sintered wire mesh filter allows for maximum flow rates, making it ideal for applications where high levels of permeability are required. Corrosion Resistance: Stainless steel is inherently resistant to corrosion, making it an excellent choice for applications where exposure to harsh environments is a concern. Versatile Fabrication: Stainless steel sintered wire mesh filters can be easily fabricated into a variety of shapes and sizes, allowing for customization and versatility in a range of applications. Applications The versatile and efficient stainless steel sintered wire mesh filter finds use in a wide range of applications. It is commonly employed in the filtration of a variety of substances including polymers, food, water, cosmetics, pharmaceuticals, and chemicals. Additionally, it is utilized in the fluidization of bulk materials in conveyors, driers, coolers, and� storage silos, as well as in hydraulic fuel filtration. Its ability to withstand harsh environments and maintain reliable filtration performance makes it a popular choice across industries.

Sintered porous candle filter with M30 interface is created by compacting metal powder and subjecting it to high temperature sintering, resulting in a rigid and durable shape that possesses excellent air permeability and separation properties. The characteristics of the filter, including its pore size, distribution, strength, and air permeability, are influenced by the fineness of the powder particles, as well as the compacting and sintering procedures employed. sintered porous candle filter with M30 interface, which features a sintered porous structure, is capable of achieving a filtration rating of 0.25 50 um, making it suitable for a wide range of filtration applications. Parameters Material: Titanium Max. operating temperature:300 C Porosity:30% 35% Pore size:10um Size: 30 100mm Compressive strength:3 MPa Max. differential pressure:0.6 MPa Features 1.The sintered porous candle filter exhibits exceptional separation capabilities while maintaining a low pressure drop, owing to its efficient air permeability. 2.With a high filtration rating, the sintered porous candle filter effectively removes suspended solids and particles, resulting in excellent purification performance. 3.The sintered porous candle filter has excellent mechanical strength, providing exceptional rigidity and plasticity for a wide range of filtration applications. 4.The sintered porous candle filter is highly resistant to corrosion, high temperatures, and high pressures, ensuring long-term durability in even the most demanding filtration scenarios. Applications Water Treatment: removing impurities and particles from water, making them suitable for water treatment applications in industries such as pharmaceuticals, food and beverage, and municipal water treatment. Chemical Industry: used in the chemical industry to filter chemicals and solvents, remove impurities, and ensure product purity. Oil and Gas Industry: used in the oil and gas industry to filter fluids such as crude oil, natural gas, and other hydrocarbons. They are also used to remove impurities from drilling muds and other fluids used in drilling operations.