IRON ORE IN BIG VOLUMES, NIGERIA: 1. HAEMATITE IRON ORE SITE 1 - Reserve Estimate : 26,553,534 Metric Tons - Iron Content: 70% - S.G: 4.05 2. HAEMATITE IRON ORE SITE 2 - Reserve Estimate : 29,433,844 Metric Tons - Iron Content: 72% - S.G: 4.2 3. MAGNETITE IRON ORE Reserve Estimate : 243,838 Metric Tonnes - Iron Content: 60.8%� -� S.G:� 5.0
Iron ore fines, sponge, pellets.
Iron Ore Specs : Variable FeO 16.28 % Hierro Total 64.02 % SiO2 4.03 % AhO3 0.24% s 0.07% p 0.04 % CaO 1.34 % MnO 0.00%, PbO 0.00 % MgO 0.00 % ZnO 0.00%, TiO2 0.00% As 0.00 % Cu 0.02 % K2O 0.00% Origin Mexico Minimum monthly shipment 100,000MT CFR terms only (Maximum quantity of 200,000MT per month is possible) Annual contract only The price shall be quoted against firm inquiry. Payment: 90% by DLC / MT700 Nontransferrable and confirmed and payable at sight (Loading port) after SGS for quality and quantity. Balance 10% shall be against discharge port inspection at the discharge port in China Sellers performed shipments in the past ( during 2019 prior Covid period ). This offer is valid for a limited period and the response to queries shall be only through email so long as inquiries are received with KYC of the buyer/end user.
Gypsum rocks, gypsum powder, rock salt (industrial salt and deicing salt), food grade salt, sodium bicarbonate, limestone, white limestone (marble chips), sulphur (granular, lumps).
Iron ores are the raw material used to make iron and steel. Iron ore production has significantly expanded in recent years, owing to increasing steel demands in developing countries, such as China. As the content of iron ore in deposits has deteriorated, low-grade iron ore has been processed. Iron ore concentrate is an output product from processed iron ores that have been milled (crush, grind, magnetic separation, flotation) to separate deleterious elements and produce a high-quality product. Sintering and pelletizing are economic and widely used agglomeration processes to prepare iron ore fines/iron concentrate for ironmaking use. The quality requirements of sinter and pellet, such as physical, chemical, and metallurgical specifications, depend on each ironmaking furnace, and those requirements influence the operation of the iron ore sintering and pelletizing plant. Researchers have usually focused on the effect of the chemical, physical, and mineralogical characteristics of iron ore on these steps and the consequences for sinter/pellet quality and sintering/pelletizing performance. The present Special Issue on â??Iron Concentrate Particlesâ?? will summarize the progress achieved in the last five years.
Our iron ore pellets and fines are made from magnetite and have high iron ore content â?? pellets at around 67 percent concentration and fines over 70 percent. This means they have lower impact on the environment than competing pellets and products such as sintered hematite fines. Using pellets instead of sinter (slightly larger pieces of iron ore) in customersâ?? pig iron processes saves emissions at steel plants. The high concentration of iron combined with the carefully tested and balanced additives in our pellets also result in lower emissions in customersâ?? ironmaking processes.
Galvanised Iron (GI) Pipes are manufactured using mild steel strips of Low Carbon Steel Coils. The strips are passed through a series of fin rolls to give them a circular shape. The slit ends of the strips are then welded together by continuously passing high frequency electric current across the edges. The welded steel pipes are then passed through sizing sections where any dimensional deviations are corrected. The pipes are then cut into desired lengths by automatic cutting machines. The tubes are then pressure tested for any leaks randomly. The galvanization and varnishing of pipes are done as per specific requirements.The GI Pipes are generally used for distribution of treated or raw water in rural or urban areas. These pipes are cheaper, light weight and easy to handle.
Hematite is an iron ore that contains iron in the form of Fe 2 O 3. It is a significant source of iron extraction. Hematite is a mineral that is paramagnetic. As a result, it can be drawn to an external magnetic field. It is an iron oxide with a chemical composition of Fe 2 O 3. It is a common rock-forming mineral found in sedimentary, metamorphic, and igneous rocks at locations throughout the world. Hematite is the most important ore of iron. Hematite is a heavy and usually hard oxide mineral that constitutes the most important iron ore123. It has a chemical formula Fe2O3, indicating that it consists of two iron (Fe) atoms bonded to three oxygen (O) atoms4. Hematite has a high iron content and is one of the most abundant iron ores found on Earth43. It is often found in sedimentary, metamorphic, and igneous rocks4. Hematite is mined in some of the largest mines in the world3. Hematite ore has naturally high iron content suitable for steelmaking5. Features Of Iron Ore: Iron ore is the main raw material that is used in the manufacturing of steel. 97% of the mined iron ore goes in the steel production. Nigeria has rich deposits of Iron Ore and is among the top 8 exporter of iron ore in the world. Please find below our IRON ORE SPECIFICATIONS 1. HAEMATITE IRON ORE SITE 1 - Reserve Estimate : 26,553,534.835 Metric Tons - Iron Content: 70% - S.G: 4.05 2. HAEMATITE IRON ORE SITE 2 - Reserve Estimate : 29,433,844.835 Metric Tons - Iron Content: 72% - S.G: 4.2 3. MAGNETITE IRON ORE Reserve Estimate : 243,838.14 Metric Tonnes - Iron Content: 60.8% - S.G: 5.0 Metal analysis of 6.885 Iron Ore QUALITY TEST: Analysis was done using AAS & XRF-ANALYZER and the ELEMENTAL Compositions of the sample(s) are reported below: CERTIFICATE OF ANALYSIS SAMPLE ID IRON ORE SPECIFIC GRAVITY (SG) PARAMETERS Weight % 5.00 TiO2 0.746 Fe2O3 60.885 As2O4
Nickel sludge, zinc ash, copper ore, lead ore, chrome ore, manganese ore, bauxite ore, iron ore, iron ore pellets, tin ore, ir64 rice, ir 64 5% broken rice, zinc ash, raw red chilli, chrome ore, iron skull, 1121 sella white basmati rice, 3 ply surgical masks.
Sponge iron, billets, iron ore fines.
Iron ore is the main source of primary iron required for the global iron and steel industries. It is essential to produce steel, which helps to create and maintain a strong industrial base. iron ore fines 57% grade is available from India. We have ready stock of 50,000 MT available in port. Payment Term - LC For price and specification please contact us
Product Description : FE-(57,62,62 plus) size 0-10, 10-30, 10-40, 5-18 as per requirement available. Price of product ( USD price or FOB price) : TBD Product origin : India, South Africa, World wide. Key Specifications/Special Features : Payment Terms- Advance payment for exmines OR for CIF - ASWP - DLC-SBLC- Sight LC Minimum Order Size and Packaging details : Minimum Order Quantity 50k MT and above.
Chicken, beef meat, pork, sugar, milk powder, pvc, plastic resins, d6, jp54, a1, mazut, hdpe, iron ore, used rails, steel billets.
Iron ore is the main source of primary iron required for the global iron and steel industries. It is essential to produce steel, which helps to create and maintain a strong industrial base. fe 62 and other percentages. Iron ore mining methods vary by the type of ore being mined. There are four main types of iron ore deposits worked currently, depending on the mineralogy and geology of the ore deposits. These are magnetite, titanomagnetite, massive hematite and pisolitic ironstone deposits. Origin :- Mexico , Brazil, South Africa. Iron ore with Fe2O3 content 70%. Fe2O3 - 70,03%, SiO2 - 22,08%, Al2O3 - 3,25%, P - 0,099%, FeO - 1,10%, CaO - 0,29%, MgO - 0,47%, TiO2 - 0,101%, MnO - 0,034%, S - 0,03%, Humidity - up to 5,00%. Iron ore with Fe2O3 content 60%. Fe2O3 - 60,29%, SiO2 - 35,54%, Al2O3 - 1,03%, P - 0,042%, FeO - 1,09%, CaO - 0,17%, MgO - 0,34%, TiO2 - 0,036%, MnO - 0,051%, S - 0,081%, Humidity - up to 5,00%
Cast Iron Scrap for sale. Free from mud, dust, fluff, non ferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings, any organic waste and any other harmful substances. Dirt, dust rust, fluff and other impurities not allowed over 1%. Chemical Composition: C:0.06 â?? 0.082% Mn:0.75 â?? 1.05% SI:0.13 â?? 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15%
- Ironing Type: Dry Ironing + Spray - Three levels of temperature: 100C/120C/140C - Using Time: 100C-38min, 120C-34min, 140C-30min, - Hot in 30s - One-touch spray, put on after ironing - Water Tank Capacity: 30ml - Power Bank Function - Battery : 5000mAh, Rechargeable - Charging Time : 3h - Charging by USB - Ironing time : 30mins to 38mins based on different Temp - Product Size : 85 x 80mm - Product Weight : 360g
En590 10 , D6 , Naphtha , Jetfuel, Nigerian Crude, Petcoke, and Iron Ore ( Mexico origin ).
Petroleum products like en 590 grade 10 ppm, jet fuel a1 grade, lsdo, fuels for automobiles, fertilizers like urea 46, npk, all types of phosphates, potassium and nitrogen. iron ore hematite and magnatite grades 62%, 65.5%, 68% and 72% fe grades in fines and lumps. hms scrap 1&2; rail scrap r 50 r 65 grades..