ACTOR-512, a vulcanizing agent for special rubber containing chlorine Cas: 72676-55-2 Composition: Thiadiazole derivatives Appearance: Yellow powder Indicator Detection Method Fineness 200 Pass Rate (> 99%) Screening and Washing Elemental Analysis of 17.5-19.7% Nitrogen Content Elemental Analysis of Sulfur 63.0-67.0% Testing Indicators: Based on Enterprise Standards Ash content 0.4% Density 25 degrees C 2.09 Mg/m3 Drying weightlessness 2 hrs. at 60-65 degrees C 0.40% Melting point 153-160 degrees C Soluble insoluble in water and benzene Purpose: Actor-512 is a polymer obtained by oxidation of dimercaptothiadiazole, in which the content of sulfur element reaches 66%. Hybrid compounds have conjugated atoms, so they can be used for many special purposes. 512 can also be used as an extrusion and anti-wear additive in the production of lubricating grease, which endows the grease with high extreme pressure and anti-wear properties, and has a series of anti-oxidation effects with the role of metal deactivation, effectively preventing the pollution of non-ferrous metals to oil products. Packing: 25kg/drum Shelf life: sealed at room temperature for one year
TEST ASTM SPECIFICATION Kin. viscosity @ 100 °C D-445 40-70 Flashpoint ( ° C ) min D-92 235 Aniline point ASTM D611-IP2 27-37 Type of drums: New Steel Drums Weight Around 205 kg/net/drum Quantity: Minimum 5 FCL Packing details: In 20ft containers with 16.5 M/T IN 80 DRUMS
The rubber reclaiming agent has better permeability and stability in the desulfuration process of reclaimed rubber. It can increase the strength tensile, elongation of reclaim rubber and low the Mooney viscosity. This improves the performance of reclaim rubber. Product Specification Appearance Dark brown viscous liquid Total Sulfur Content 11% Min Combined Sulfur Content 10% Min Free Sulfur content 1% Max Viscosity (35 centigrade), Pa.s 8-20 Solubility in water Negligible Features 1.Shorten the desulfurizing time 2.Improve the product quality 3.Decrease the production cost Application Widely used for the whole tire reclaim rubber, butyl reclaim rubber and EPDM reclaim rubber. Any inquiry, pls contact sofia.chu(at)zzdenglan.com freely.
Product name: pre dispersed rubber vulcanization accelerator cbs - 80 (cz - 80) Producing area: liaoning panjin Chemical name: n - cyclohexy - 2 -benzothiazole sulfenamide Product application: it is an after-effect accelerator. It has high performance of scorching resistance and short curing time. It mainly used for tire, rubber tubes, shoes, tapes, tapes and cables. Packaging and shipping: 25 kg, polyethylene bag lined with carton. It should be stored in a dry, cool, ventilated place
Specifications CBS Rubber Accelerator for tyre industry Gray-white powder(granule) CAS:95-33-0 Packing:25kg/bag ISO9001-2008 SGS Application: A medium fast primary accelerator suitable for NR, IR, SBR, NBR, HR and EPDM. An outstanding delayed action accelerator. Be top effective and safe when used at ordinary processing temperatures, causing no scorches. Vulcanized show excellent physical property and quick complete. Usually used alone, when activated by Accelerator D, Accelerator TT and Accelerator TS. Packaging: 25kg plastic woven bag, paper wilh plastic film bag, kraft paper bag 25KG/bag
Styrene Butadiene Rubber, Payment Terms : T/T, Bank or Wire Transfer, PayPal, Western- Union, Ria-Transfer Total or Minimum order Quantity ?, For Delivery time get back to us so we can provide all those for you if interested. Regular others also have added advantages, Bulk orders as well
Our Rubber Processing Oil products are of great quality and are Developed taking in to consideration the usage and product requirement. Rubber Processing Oils are used during the mixture of rubber compounds. Rubber can be synthetic or natural and are used in the manufacturing of rubber products ranging from small rubber bands to huge vehicle tires. Depending on the physical arrangement of the carbons atoms, Rubber processing oil are broadly classified in to three major groups namely;
Wholesale Colorless Rubber Crumb Polyurethane Adhesive glue Waterproof Rubber Binder, Mix with EPDM or SBR rubber granules, to install running track, playground, sport courts, jogging track, park, etc. 20kg/bucket, 960kg/pallet, 19.2ton/20ft container 200kg/drum, 16ton/20ft container
Properties: A little bitter taste. Specific gravity: 1.50--1.59. Soluble in chloroform, toluene, benzene, carbon tetrachloride. Insoluble in water and ethyl alcohol. Application: Given flat, moderately fast cures in NR and SR. Also used in a wide range of general purpose rubber. Non-staining/non-discolouring in "white" socks; use as a plasticiser and/or retarder in polychloroprene rubber. Secondary acceleration is usually required for synthetic polymers. Better scorch safety than MBT. Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended max. storage life is 2 years when stored under normal conditions. Packaging: 20kg bag.
Properties: Slightly foul odor and bitter taste, nonpoisonous. Specific gravity: 1.46-1.52.Soluble in ethyl acetone, acetone, dilute solution of sodium hydroxide and sodium carbonate, ethyl alcohol. Not easily soluble in benzene. Insoluble in water and gasoline. Application: Used for NR, IR, SBR, NBR, HR and EPDM.One of the mainly used acidic accelerators currontly and a medium fast primary accelerator. Imparts excellent aging properties, when used both alone and in combination with DM, TMTD and many others, mainly basic accelerators for higher activity. But care should be taken because it has a slight tendency to scorch. Unsuitable for use in the manufacture of food contact materials. Mainly used in the manufacture of tires, tubes, footwear, rubber belts and hoses etc. Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended max. storage life is 2 years when stored under normal conditions. Packaging: 25kg bag.
Properties: This product is brown piece of amber, Density:1.05g/ cm3. Soluble in benzene, chloroform, carbon disulfide and acetone, but not soluble in water. Fine solution with rubber. This product is combustible, when storing and transporting, always pay attention to fireproof and dampproof. Application: RD is a very important category rubber antioxidant. It has a good protective effect for heat, oxygen and fatigue aging, and stronger inhibitory effect for metal catalytic oxidation, no spray cream phenomenon, widely used in the manufacture of tyres, motorcycles births, bicycles births, rubber, plastic, adhesive tape, wires, cables and other rubber products. Package: In knitted bag lined with plastic bag or kraft paper bag.25kgs/bag or at buyer,s request.
Item Index Appearance White or light yellow powder Melting point, min 104.0 Heating loss, % max 0.40 Ash, % max 0.40 Residue(150m) , % max 0.10 Insoluble In methanol, % max 1.0 Free amine, % max 0.5 Purity, % min 96.0
Item Index Appearance Grayish white or yellowish powder Melting point min 98.0 Heating loss, % max 0.30 Ash, % max 0.30 Residue(150um) , % max 0.05 Free amine, % max 0.50 Insoluble in methanol, % max 0.50 Purity, % min 97.0
Item Index Appearance White or light-yellow powder Melting point, min 166 Heating loss, % max 0.40 Ash, % max 0.50 Residue(150m) , % max 0.05
Rubber Process Oil are rich aromatic by products from solvent extracting process to modify physical properties of the vulcanization and to reduce the cost of the finished product. Typical Uses / Applications As component in rubber formulations and manufacturing of products such as automobile tiers, rubber shock absorbers, footwear, industrial hoses, wire and cable coverings, flooring materials and carrier fluid or solvent in manufacture of adhesives, sealants, polishes and carbon black To improve physical properties of vulcanization to reduce the cost of finished rubber compounds Tyre, Rubber and Dhoop Industry Used as a Lubricant in Rubber Processing Used in manufacturing of White Oil Used as a component in Ink Production
Properties: White powder (granule). Density is 1.41. Soluble in 1% NaOH solution, CS2, benzene, chloroform, slightly soluble in alcohol, insoluble in gasoline. Application: Used for NR, IR, SR, SBR, NBR, EPDM and their latexes. A fast curing primary or secondary effective ultra-accelerator for natural and synthetic latex form compounds. Can be used advantageously for dipped, spread, and cast goods. Similar in property that of PZ. Less resistance to scorching than PZ and shows a slight tendency to premature vulcanization. An antioxidant in adhesive systems. Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag. Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 2 years.
Properties: Gray-white powder (granule) with a little odor, no poison. The density is 1.31-1.34. Soluble in benzene,boluene, chloroform, CS2, CH2Cl2 acetone, ethyl acetate, hardly soluble in alcohol, insoluble in water,gasoline, acid / alkali with lower concentration. Application: A medium fast primary accelerator suitable for NR, IR, SBR, NBR, HR and EPDM. An outstanding delayed action accelerator. Be top effective and safe when used at ordinary processing temperatures, causing no scorches. Vulcanized show excellent physical property and quick complete. Usually used alone when activated by DPG, TMTD and TS. Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 1 year.