This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
Building & construction materials, minerals and chemicals, fly ash (astm c618 class f / bs en 450 / bs 3892), ggbfs / gbs, aggregates (crushed stones, stone chips), bentonite (drilling, pilling, foundry, construction), kaolin/china clay, salt/sodium chloride (industrial grade, food grade).Exports
Attn: Import / Purchase Department. We are exporting Cement etc from direct from producers. Kindly note we can offer following grades: - ORDINARY PORTLAND CEMENT (OPC) We offer Ordinary Portland Cement (OPC) that is used in all general constructions, especially in major and prestigious projects where cement is needed to meet stringent quality requirements. It can also be used in concrete mortars and grouts, etc. Ordinary Portland Cement is compatible/consumable with admixture/ retarders, etc. OPC has easy workability and lower heat of hydration. We maintain our technical standard of quality parameter at high level and with high strength at all ages. Our OPC cement satisfies EN 196 / 197 1, SABS, BIS, SLSI & PSS 232 ~ 1983 (R). Port Land Cement, EN 197-1 - CEM I42,5N Ordinary Portland-Cement PS-232-2015CEM I 42,5N Ordinary Portland-Cement ASTM C 150Type I Ordinary Portland-Cement ASTM C 150Type II Ordinary Portland-Cement ASTM C 150Type III Ordinary Portland-Cement IS 269:201543 Grade Ordinary Portland-Cement IS 269:201553 Grade Ordinary Portland-Cement SLS 107: 2015CEM I 42,5N Portland Cement SANS 50197-1 :2013CEM I 42,5N Portland Cement SANS 50197-1 :2013CEM II / AL 32,5N Portland Cement KS EAS 18-1:2001CEMI 42,5 N Ordinary Portland-Cement ASTM C 150 Type I SULPHATE RESISTANT CEMENT. By maintaining C3A level within the specified limit of 3.5%, our Sulphate Resistant Cement is more resistant to Sulphate attacks and is suitable for use in foundations near seashore and canal linings. SRC has lower heat of hydration and its strength satisfies B.S 4027 / 1980 & PS 612 / 1989. GRADES: - 1. ASTM C150, Type V. 2. BS 4027:1996 / PS-612-2014, 42,5N 3. SANS 50197-1 : 2013, CEM I 42,5N Besides we can also supply CLINKER. Payment Terms: 100% irrevocable LC at sight. / TT Delivery: Prompt. Packing: 50 kg bags (or as per customer requirements). Inspection: Third party SGS inspection is possible. If you are interested, please send your detailed inquiry with Qty required, Port of destination, payment terms, delivery required, etc so that we can quote you our most competitive prices. Looking forward to receive your inquiries at the earliest.
Cement, clinker, bauxite, gypsum, fly ash, ggbfs, iron & steel products, kaolin, scrap, pumice stone.
Fertilizer, bitumen, sesame seeds, sugar, charcoal, cashew nuts, and cement.Oil and gas, customs brokerage, freight forwarding, logistics, and mining
Gypsum products, gypsum board, ceiling tiles, suspended ceiling, flooring tiles, all kinds furniture, shoes, generators, cement, biscuits, chocolates, jeans, t shirts, sweatshirts.
Pp woven bags, sugar bags, sand bags, soya bags, pp woven sacks, bopp laminated bags, cement bags, flour bags, seed bags, rice bags, fertilizer bags, chemical bags, hdpe woven sack, wheat flour bags , ldpe tarpaulin, ldpe sheet, spices, rice, wheat flour.
cement clinker is in super high strength,early strength,low alkaline,fast setting time,rapid hardening,frost and corrosion resistance. Additionally, cement clinker are sometimes used in shrinkage compensated concrete by mixing with portland cement and for controlled low-strength materials (CLSM) used for diggable back-filling of utility trenches.
Hi . we are company from .our company product is clinker cement , best quality portland cement originating from . competitive price. volume 500,000 mt/month. Please contact us via
Specification: - Sack width: 35~60cm - Tube length: 50~150cm - Tube length for mini bottom width: 56~150cm - Tube length for maxi bottom width: 96~164cm - Sack length: 43.5~137cm - Bottom width: 7.5~22cm - Bottom center distance: 36~130cm - Valve cut off length: 9~23cm - Bottom patch cut off length: 18~60 - Bottom patch unit: 2 Color flexo printer
Soda ash light / dense 99.2% sodium bicarbonate caustic soda flakes 99% sodium sulphate anhydrous (ssa) 99% sodium sulphite flakes (ssf) 60% sodium metabisulphate hydrogen peroxide (h2o2) 50% formic acid 85% glacial acetic acid paraffin wax liquid paraffin (white oil) lp 100 menthol crystal fumed silica deg (di ethylene glycol) mono ethylene glycol (meg) poly ethylene glycol (peg), base oil 150n, bs 150, 600n bitumen 60/70 rpo (rubber process oil) lioh (lithium hydroxide) hco (hydrogenated castor oil) 12 hsa (hydroxy stearic acid) ferrous sulphate heptahydrate additive for lubricating oil aromatic chemicals.Exporting of chemicals & other products
Cement Grey Portland 42.5 General Use. Vietnam port loading CIF INCOTERMS USD 85.00 X MT 10,000 MT UP 50,000 MT MONTHLY LC 100%
Portland (constructional) Cement is a fine powder mixture of various minerals. It is produced by mixing calcareous minerals such as chalk, limestone containing silica and alumina and heating it to 1450 deg C when it cools a clinker is formed. This clinker is then finely ground and mixed with small quantity 3-5% of gypsum which has calcium sulphate in it. The amount of gypsum controls the physical properties of the eventual concrete. Sometimes very minute quantities of pigments are also added. Cement producing processes do however vary. TYPES OF PORTLAND CEMENT: - OPC Ordinary Portland Cement - Rapid Hardening Portland Cement - Sulphate Resisting Portland Cement - Low Heat Portland Cement - White Portland Cement PACKING: - 50 Bags (Paper or Poly bags) - 1.5 tonne bags - 2 tonne bags - Bulk/Loose
Portland Cement and Clinker. We can afford any quantity of Portland Cement and Clinker which are used in civil engineering. We can afford different grades of Portland Cement; like: - CEM I 42.5 N - CEM I 52.5 N - CEM I 32.5 N - Clinker.
