White fused alumina for coated abrasives White fused alumina for coated abrasives,a kind of high-grade refractories, was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling. It is white with the main crystal phase alpha-Al2O3.The White fused alumina for coated abrasives produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved.
Wholesale white corindon for coated abrasives was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.White corindon is white with the main crystal phase alpha-Al2O3.The White corindon produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved. Purpose: 1.Bonded abrasives and Coated abrasives 2.Floor/Wall Laminates 3.Thermal Spraying(Plasma Spraying) 4.Lapping & Micro-blasting applications 5.Surface preparation and finishing 6.Super Refractories,Ceramics and Tiles 7.Brake linings Available sizes; Grain: 0-1mm 1-3mm 3-5mm 5-8mm Fine powder: 0-100mesh 0-200mesh 0-320mesh Grit: 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder: ï¼?FEPAï¼?F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000 Chemical analysis: Al2O3(min) 99% SiO2(max) 0.4% Fe2O3(max) 0.2% Na2O(max) 0.4% Physical characteristics: color white Mohs Hardness 9.0 Melting point 2250 Bulk density 1.75-1.95g/cm3 Real density 3.95g/cm3
Wholesale white corindon for coated abrasives was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.White corindon is white with the main crystal phase alpha-Al2O3.The White corindon produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved. Purpose: 1.Bonded abrasives and Coated abrasives 2.Floor/Wall Laminates 3.Thermal Spraying(Plasma Spraying) 4.Lapping & Micro-blasting applications 5.Surface preparation and finishing 6.Super Refractories,Ceramics and Tiles 7.Brake linings Available sizes; Grain: 0-1mm 1-3mm 3-5mm 5-8mm Fine powder: 0-100mesh 0-200mesh 0-320mesh Grit: 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder: ï¼?FEPAï¼?F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000 Chemical analysis: Al2O3(min) 99% SiO2(max) 0.4% Fe2O3(max) 0.2% Na2O(max) 0.4% Physical characteristics: color white Mohs Hardness 9.0 Melting point 2250 Bulk density 1.75-1.95g/cm3 Real density 3.95g/cm3 Contact information E-mail mia@hxabrasive.com Mob 008613592570797 Whatsapp +8613592570797 Wechat 13592570797 Skype Mia Wen
Details: 1.Place of original: HENAN 2.Material:AI2O3 3.Real Density: 3.95g/m3 4.Bulk density: 1.75-1.95 g/m3 5.Melting point: 2250 6.Refractoriness:1900 7.Mohs hardness: 9.0 8.Usage: abrasive/blasting/polishing/refractory 9.Packages: 25kg PPbag, 1MT Jumbo bag, pallet, 25kg paper bag or as customer's requirement. 10.Certificate: ISO9001, 11.Sampla: free 12.MOQ: 25ton 13.Color: white. Supply Ability 3500 Ton/Tons per Month. Application: 1. Used for free grinding, such as glass industry. 2. Used for friction products and wear-resistant floors. 3. Suitable for resin or ceramic bond abrasive, such as grinding wheel, cutting off grinding wheel, etc. 4. Suitable for refractory, wear-resisting and refractory products. 5. Used for polishing, such as grindstone, grinding block, plate turning, etc. 6. Used for coating abrasive tools, such as sandpaper, emery cloth, sand belt, etc. 7. Used for precision casting, grinding, grinding, polishing mold production.
White fused alumian/corundum is an artificial corundum abrasive, the main component of aluminum oxide (Al2O3), and contains a small amount of iron oxide, silicon oxide, etc., the color was white. White corundum high quality alumina powder as raw material, refined crystalline and fused into, there are dense texture, high hardness, high temperature, acid corrosion, thermal stability properties. particles cusp form for use in the manufacture of ceramics, resin bonded abrasives and grinding, polishing, blasting, precision casting, can also be used to manufacture advanced refractory. Application 1.Spraying and grinding. 2.High-end products, crafts or hardware products surface beautification processing. 3.Precision casting, silicon crystal cutting, advanced refractories and ceramic additives. 4.Bonded abrasives and coated abrasives. 5.Processing harder and stronger tensile strength materials such as quenching steel, alloy steel, high speed steel and high carbon steel. 6.Ultra-precision Grinding and Polishing in Crystal and Electronics Industry, Precise Surface Treatment of Metal and Optical Products 7.Contact media, insulators and precision casting sand Size Sectional sand 0-1mm 1-3mm 3-5mm 5-8mm Fines 100#-0 200#-0 320#-0 Grains 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# 240# Micro powder W--- W63 W50 W40 W28 W20 W14 W10 W7 W5 W3.5 W2.5 W1.5 W0.5 GB---240# 280# 320# 400# 500# 600# 800# 1000# 1200# 1500# 2000# 2500# 3000# JIS---#240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 FEPA---F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 F2000
Brown fused alumina corundum is produced by a reduction fusion of high quality bauxites in electric arc furnaces. It is both a hard and tough material with high strength, making it an excellent abrasive grain for applications such as grinding wheels, sandpaper, blasting media, metal preparation, lapping, polishing, and grinding. Its thermal properties make it an excellent raw material for refractory applications.
Polishing abrasive white carborundum powder White carborundum powder was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.It is white with the main crystal phase alpha-Al2O3.The white alumina produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved. Physical Index color white Mohs Hardness 9.0 Melting point 2250 Maximum service temperature 1900 Bulk density 1.75-1.95g/cm3 Real density 1.75-1.95g/cm3 Chemical analysis Al2O3(min) 99.6% SiO2(max) 0.4% Fe2O3(max) 0.2% Na2O(max) 0.4%
Used in processing of HVOF WC coatings Simple operation Proficient in the use of precision measuring instruments Good wear resistance PRODUCT DETAILS Description: Diamond sanding abrasive belt is a kind of coated abrasive tool, which is superhard material (synthetic diamond) abrasive particles adhesive to the flexible base by bond. And it can be divided into metal nickel plating electroplated bond and resin bond, resin bond also consists flexible and hard type. In some sense The grinding by diamond sanding belt for thermal spray coating industry can replace that of diamond grinding wheel and film polishing. Diamond sanding belt can complete the grinding and polishing process. Recently, it is widely used in thermal spray coating industry, the production and repair of hydraulic cylinder and turbine blade. Application: Diamond sanding abrasive belt can be widely used for grinding steel, stone, glass, ceramics, mono crystalline silicon, polysilicon, zirconia, alumina, metal-nonmetallic synthetic materials, cemented carbide, aluminum magnesium alloy, aluminum beryllium alloy, titanium alloy and etc. hard brittle materials. Example Parameters of Grinding Machine and Material Workpiece diameter 400mm*12 HVOF spraying Grinding machine model: 65656 Belt speed: 22 m/s (2800rpm) Belt contact workpiece mode: soft contact or hard contact. Workpiece rotation speed: 30 RPM Coolant: water or others. Spray coating thickness: 250μm Original roughness of spray coating: Ra 0.4mm-0.6mm Machining allowance of spray coating:100μm Coating thickness after processing: 150μm
BFA Brown alumina for coated abrasives BFA Brown alumina for coated abrasives is made of bauxite/anthracite coal,and smelted in electric-arc furnace of high temperature more than 2000degrees.BFA Brown alumina for coated abrasives is suitable for metal with high tensile like: steel, malleable iron,bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.BFA Brown alumina for coated abrasives is also used for refractory material. Brown alumina abrasive with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength. Applications of BFA Brown alumina for coated abrasives: 1.sand blasting for aluminum profile/copper material/glass/washed jeans/precise mould 2.grinding for konescope/glass/monocrystalline silicon/lens/jadeware 3.abrasion-proof material for expressway/airstrip/dock/parking lot/stadium 4.bonded abrasives and coated abrasives 5.surface preparation and finishing 6.Thermal Spraying(Plasma Spraying) 7.Super Refractories,Ceramics and Tiles 8.Lapping & Micro-blasting applications
Steel Shot is made of Chrome Alloy material which are fast atomized after melting.After heat treatment,it is featured with optimum mechanical characteristics,good tenacity,fatigue resisance,long woring-life,low consumption and so on.These made consumption save more than other suppliers' steel shot.
4x3/64x1 105x1.2x16mm, Color:Black 50pcs/box, 800pcs/ctn, For more information contact me freely.
180x3.0x22.2mm, Color:Black 50pcs/box, 100pcs/ctn, For more information contact me freely.
Grinding wheel Fiberglass backing pads/ abrasive disc/ grinding disc It is adopted of multi-Layer stack of compression molding in the mold after curing by heating. It is the base material of flap discs with the feature of light weight ,high strength good adhesive properties etc. Type,Metal ring,Layers ,thickness mm,Inside diameter mm,Outside diameter mm T 27 flat,T29 convexity,T29 convexity,1 or 2,3-12,2.4-3.5±0.3,60.2 or 22.3±0.15,75/85/95/107/117/140/170±0.5
Super thin cutting wheel 4''*3/64''*5/8''(105*1.2*16mm) 1.flat type,2nets,medium hardness 2.made of brown fused alumina,suitable for grinding medium and high tensile strength metal. 3.high tensile and brittle 4.used safely and long life 5.with ISO certificate. 1.1000pcs/carton 2.according to the customers' request.
Black Silicon Carbide for abrasive 1. Introduction Black Silicon Carbide is produced from quartz sand and high quality anthracite/petroleum coke under high temperature in and electric resistance furnace. It looks black and has a microhardness of 2800-3300kg/mm2. Abrasive tools made of it, are fit to grind metals and non-metals materials of low tensile strength, for example, grey cast iron, brass, alumina, stone, leather and hard rubber etc. It can also be used for refractory purpose or in electronic industry. 2. Chemical composition F8-F360 SiC: 99%min; F. C: 0.2%max; Fe2O3: 0.2%max F400-F600: SiC: 98.5%min; F. C: 0.4%max; Fe2O3: 0.4%max F800-F1200 SiC: 97.5%min; F. C: 0.6%max; Fe2O3: 0.6%max. 3. Application It is widely used in the fields of abrasive(sandcloth, sandpaper, gringding wheel), blasting, grinding, refractory and engineering ceramics industries. Also, it can be processed to micro powder, and used in the field of electronics, spaceflight and advanced internet industry. 4. About us Henan Sicheng Co., Ltd, founded in 1999, is specialized in White Fused Alumina, Brown Fused Alumina, Mullite and other related products. Our production runs under the certifications of GB, ISO, FEPA, and JIS. We offer various items de pending on the demands of our customers. Currently, we have exported our products all over the world, such as Europe, the USA, India, and Japan, enjoying good reputation in machinery, metallurgy, light industry and other fields. FEPA standard 25kg PVC Bags + 1mt Big Bag.
Model: White fused alumina F46 Chemical compositions Al2O3: 99.53%min SiO2: 0.04%max Na2O: 0.26%max Fe2O3: 0.04%max Physical properties Color: White Bulk density: 1.75-1.95g/cm3 Grain density: 3.90g/cm3min Morse hardness: 9 Content of magnetic substance: 0.0023%max. 25kg PVC bags + 1MT big bag.
Sanding screen (open mesh abrasive) Application: Sanding surface of woodworking,plaster,metal,plastic , enamel and remove rusty spots of metal materials and making grinding and polishing treatment. Performance include: It's flexible for sanding contoured and irregular surfaces and fully Waterproof can be rinsed to allow for reuse. Open mesh screen design resists clogging and both sides coated with abrasive grains of the screen . The grinding and cutting efficiency and durability is far beyond the conventional abrasive material. It is practically self cleaning, last longer, and cut through joint compound faster. It can be finished as sheets, discs, rolls or according to your requirements. Specification include: Sanding screen sheet (size): 3-5/16 x 11, 3-2/3 x 11(9), 4 x 5-1/2, 4-3/16 x 11, 9 x 11. Sanding screen floor discs (size): 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24. Sanding screen rolls(size): Width:1, 1-1/2, 2, 3, 4, 5, 6, 36. Length:25yds , 50yds, 100yds. Available grit sizes: P40,P60, P80, P100, P120, P150, P180, P220, P240, P320, P400, P600 Grain: Silicon carbide/ Aluminum oxide Standard Packing
Cleaning abrasive powder ARTA 3/1 (cleaning, disinfection, polishing) contains components that penetrate deep into surfaces and not only destroy ingrained dirt, but also kill 99.9 dangerous bacteria. Shelf life is 36 months.
Flap Disc/poly Strip Disc For Angle Grinder Products name:Clean Disc and Strip Disc Material:Silicon Carbide,Reinforced fiberglass backing,nylon backing Grit,soft density(black),medium density(blue),high density(purple) Diameter,4inch,4.5 inch, 5 inch,etc. Application: Removing paint and adhesives,cleaning weld seams removing welding scale and discoloration,surface preparation. Work Surface,Stainless steel,standard or alloyed steel,aluminum,titanium,nonferrous materials,alloys,fiber glass,plastic reinforced by fibre glass,stone and wood. Packing:white box/plastic bag
Function characteristics of white fused alumina sand: It will not affect the color of the workpiece; It can be used for sand blasting in the process of prohibiting iron powder residue; micro powder grade is very suitable for wet sand blasting and polishing; high processing speed and good quality; the content of iron oxide is very low, which is suitable for sand blasting operation in which iron slag is strictly prohibited; Remove impurities by pickling. White corundum abrasive treatment Many advantages of white fused alumina abrasive contribute to its important application in industry, but the waste of white corundum abrasive used in workpiece processing has become the main problem faced by enterprises. When white fused alumina abrasive is used, abrasive precipitation will occur. Of course, there will be other sundries on the workpiece. If the two are combined, the difficulty of cleaning will be further increased.
