Features: --superior wear resistance --high hardness and mechanical strength --good corrosion resistance --high precision for tolerance They're widely used in oil&gas, bearings, ball screws, valves and flow meters.Pen, spraying machines, pump, machinery parts and other industries. Grade Density G/cm3 Hardness Hra(hv) T.R.S (m pa) Performances & applications recommended Yg6 14.9 89.5 2150 Good wear resistance, used for hard wood, processing Original wood, aluminum section bar, brass rod and cast iron. Yg8 14.6 89 2320 Suitable for the roughening of cast iron and light alloys and Also for the milling of cast iron and low-alloy steel. Faq: Q1. Can i have a sample order ? A: yes, we welcome sample order to test and check quality. Mixed samples are acceptable. Q2. What about the production time? A:sample needs 3-5 days, mass production time needs 2-3 weeks for order quantity more than Q3. How do you ship the goods and how long does it take to arrive? A: we usually ship by dhl, ups, fedex or tnt. It usually takes 3-5 days to arrive. Airline and sea shipping also optional. Q4. How to proceed an order ? Firstly let us know your requirements or application. Secondly we quote according to your requirements or our suggestions. Thirdly customer confirms the samples and places deposit for formal order. Fourthly we arrange the production.
Features: --Superior wear resistance --High hardness and mechanical strength --Good corrosion resistance --High precision for tolerance They're widely used in oil&gas, bearings, ball screws,valves and flow meters.pen,spraying machines,pump,machinery parts and other industries. Grade Density g/cm3 Hardness HRA(hv) T.R.S (M Pa) Performances & applications recommended YG6 14.9 89.5 2150 Good Wear resistance, used for hard wood,processing original wood,aluminum section bar,brass rod and cast iron. YG8 14.6 89 2320 Suitable for the roughening of cast iron and light alloys and also for the milling of cast iron and low-alloy steel. FAQ: Q1. Can I have a sample order ? A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable. Q2. What about the production time? A:Sample needs 3-5 days, mass production time needs 2-3 weeks for order quantity more than Q3. How do you ship the goods and how long does it take to arrive? A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional. Q4. How to proceed an order ? Firstly let us know your requirements or application. Secondly We quote according to your requirements or our suggestions. Thirdly customer confirms the samples and places deposit for formal order. Fourthly We arrange the production.
Performance & Main components 1.Max speed:20km/h 2.Max range:30kms about for adults and teenagers 3.Max load:80kgs 4.Frame:alloy turning bar,high -tensile steel body 5.Tyre size: 8" tyre with alloy rim,front pneumatic, rear solid tyre 6.Transmission:chain 7.Wheel base:70cm 8.With seat 9.Deck:ABS 10.Folding:easy fold 11.Brake :rear :drum brake 12.With rear absorber 13.User age: >14 years 14.Color:red,yellow,pink,blue,white,black ,etc Electronic specification: 1.Motor: 250w brush motor 2.Battery: 10ah 24v lead acid battery 3.Charge time:5-8 hours 4.Charge voltage:100-240volts 50hz&60hz 5.With front lights:LED light 6.With horn: yes Packaging : Unit packaging :Each in Color Box N&G weight:21.5&22.5kgs Qty / Export carton : 1 pc /ctn Carton size:86x28x41cm Container loading:275pcs/20GP, 650pcs/40HQ Payment and delivery : Shipment: by air or sea shipment to be advised Payment term: T/T or L/C at sight MOQ: 20PCS Optional Parts: 1.Remote Alarm 2. Helmet 3.Tool Kits Certificate: CE/ISO Warranty We have warranty for four main components:Motor,Battery,Charger,and Controller. 1)The motor:1 year 2)Battery:8 months 3)Charger:1 year 4)Controller:1 year
Multi-needle ultrasonic drilling and drilling machine No. 711701002 Product model XX-1800 Ultrasonic drilling machine is a new type of drilling equipment developed in the last few years. It converts the 15KHz signal generated by the ultrasonic generator into high-frequency mechanical vibration by the transducer, and transmits it to the working head (steel needle) welded at the end of the tool head after being amplified by the tool head (commonly referred to as the needle head), driving the abrasive suspension between the working head and the workpiece (steel sand and water constantly escaping from the ring) to impact at high speed, Comprehensive effects such as friction and cavitation of abrasive suspension result in the workpiece quickly emerging to form or penetrating into holes according to the shape and line of the mold, thus realizing the whole process of ultrasonic carving and drilling. Auxiliary system includes body abrasive and coolant supply system Compared with traditional products, there are great improvements and improvements in the application of advanced ultrasonic technology, production process, energy saving and efficiency, stability and reliability. In addition to selling well in China, our products are also exported to many countries and regions such as the Middle East, Myanmar, India, South Africa, Pakistan, etc. After many years of product sales and improvement, the overall quality and stability of the product are leading in the same industry, and become the object of imitation. With perfect after-sales service, the product has won a good reputation among users. The equipment can be used for processing and production. characteristic: AC220V power supply is adopted, which works stably Fuzzy frequency modulation is adopted, and the whole machine automatically adjusts the frequency according to the actual processing power, which is easy to operate without manual adjustment Overload, overcurrent, overvoltage and automatic protection High power, high efficiency and energy saving, no radiation and no pollution High positioning accuracy Suitable for processing: jade, crystal, agate, glass, hard alloy and various semi-precious stones and metals with high hardness Common tools: tin bar, zinc powder, hydrochloric acid, tool head, needle burning table, needle burning mold, upper mold, lower mold, hollow needle wrench, water pump, perforated sand Technical parameters: Input voltage: AC220V Output power: 1800W Overall dimension: 540mm 500mm 1500mm Porcelain chip diameter: 60mm Hole diameter: 0.8-1.8mm Purpose: drilling diamond beads Weight: 50kg
ISO9809-3 150bar 37MN TUV TPED Oxygen Tanks Gas Cylinders 1 Minimum order quantity: 100 only 2 Use cylinders:Our seamless steel cylinders are widely used in industry, medical devices, fire fighting and scientific research Oxygen gas cylinders During the blanking process of gas cylinder production, the inner and outer surface and end face of the steel pipe shall be checked one by one, and the inner and outer surface of the billet shall not have cracks, serious pits, folds, folds, layers apart and scarring. The end face is smooth, no obvious burr, the inner and outer surface is clean, no feeding iron and debris, and check the perpendicularity and perpendicularity of the cylinder body one by one. This document (EN ISO 9809-3:2010) has been prepared by Technical Committee ISO/TC 58 Gas cylinders in collaboration with Technical Committee CEN/TC 23 Transportable gas cylinders, the secretariat of which is held by BSI TUV gas cylinders Interpretation of test results The interpretation of the burst test results shall involve: a) examination of the pressure/time curve or pressure/volume of water used curve, to permit determination of the pressure, py, at which plastic deformation of the cylinder commences, together with the bursting pressure ph; b) examination of the burst tear and of the shape of its edges. 150bar gas cylinders Product Information: 10.8 litres to 80 litres; 89mm-267mm cylinder outer diameter; Working pressure is 150bar; Hydrostatic test pressure is 250bar; 37 mn material; Iso9809-3 or GB/T5099.3 production standards; 2The minimum design wall thickness of gas cylinders is 2.4mm-6.2mm; The cylinder body weight is 1.60kg-72.4kg; The height of the cylinder body is 197mm-1520mm; Cylinder mouth threads include PZ19.2,PZ27.8,PZ39; 25E; 3/4-14 NGT, etc.; Maximum gas storage is 0.12m3-12m3 (150L-12000L) 3Aliases: Oxygen gas cylinders; Germany Rhein gas cylinder; 150 bar cylinder; Oxygen bomb; Gas cylinders 4A cylinder shall be considered to be of a new design, compared with an existing approved design, when at least one of the following applies: a) the nominal outside diameter has been changed; b) the guaranteed minimum thickness has been changed; c) the hydraulic test pressure, ph, has been increased (where a cylinder is to be used for lower pressure duty than that for which design approval has been given, it shall not be deemed to be a new design); d) the guaranteed minimum yield strength, Reg and/or the guaranteed minimum tensile strength, Rmg, have changed. Oxygen gas cylinders
We have our own factory and we can customize any types of laser machine according to your requirements Fiber laser making machine is one of the most advanced laser marking equipment in the world nowadays, because the features of stable output power, great optical model, excellent quality of laser beam, fast working speed and best marking effect and efficiency. Also, it is easy to operate, has no wearing parts, low power, consumption, more incomparable advantages like:better and thinner marking lines, capable of being applied into ore advanced industries needing higher demand of depth, smoothness and precision, in order to perfectly meet requirements of consecutive working in industries. Our laser marking machine adopts the best quality fiber laser source in the world. We have 10w, 20w, 30w, 50w,70w and 100w for optional. The estimated life for laser source will be around 100,000hours, which is 10 times longer life than diode laser and 2 times longer life than other fiber laser source. If you need to mark color on stainless steel, the MOPA laser source could be choosed. we adopt JPT mopa laser source which has good quality and longlife service. Features: 1. enclosed machine, to protect person from laser injure. 2. automatic door. 3. auto lifting, press button to adjust height. 4. inner red light Galvanometer, auto focus. 5. use for marking and engraving on metal and nonmetal. Applicable Material Fiber laser marking machine can be used for marking logo, serial number, bar code and other beautiful photo on any metallic materials such as stainless steel, titanium, brass, gold, silver, aluminum and lots of engineering plastic products such as mobile cover & charger, consume electronics housing, and etc. Pre-Sales Service 1.Free pre-sales consulting / Free sample marking/testing 2.Any kind of technical support are available for users. 3.We offer progressing solution design to all the distributor and users. After-Sales Service 1. 3 years warranty (People damaged are charged). 2. Full technical support\ by e-mail, call and video 3. Lifelong maintenance and spare parts supply. 4. Free design of fixtures as customers required. 5. Free training installation and operation for the staffs. Package: non-fumigation Plywood case Transportation Mode:Shipping/Air/DHL/TNT(According to your requirements) Delivery Time: 1-7days after receive the payment.
Main machine 1.Frame structure Full steel structure, stress released, with accuracy well kept. Main component is designed and Finite Element Analyzed through ANSYS software. Main frame composes of uprights, working table, holding-down beam and oil tank. Ball transporter and supporting bar and squaring arm are fixed on working table. 2.Upper blade beam and blades Guillotine type blade beam, with rake angle adjustable The rake angle could be motorized adjusted by press button according to material and thickness. When shearing thin thickness sheet, the rake angle could be reduced, thus the distortion of the product and the burr could be minimized. Exchangeable Rectangle blade, with 4 cutting edges available. Blade material 6CrW2Si with hardness HRC53-60, with quality shearing result and long life. 3. Shearing length/stroke adjustment The shearing stroke could be adjusted through knob to the length of the product. Thus efficiency could be improved. 4. Cutting beam guiding and blade clearance The cutting beam is guided between roller guides. At the rear of the cutting beam there are two sets of upper and lower roller guides located at each end of the beam. Two spring-loaded rollers located at the front of the shear apply pressure to the cutting beam, forcing it against the back roller guides. The bearings of the upper roller guides at the back of the cutting beam are mounted on an eccentric shaft. Rotating this shaft causes the cutting beam to tilt, thus providing proper blade clearance to the shearing blades. The upper cutting beam inclined forward, with high section-cutting quality on the product. The blades clearance could be adjusted manually through hand-wheel according to material and thickness. Since the blade clearance is 0.1 to 2.5 mm, the shear can cut thickness 1mm to 40mm mild steel. 5. Hydraulic system LVD special hydraulic unit for heavy type shear is adopted. Hydraulic control components is from VICKERS,USA (or REXROTH, Germany) With in-series cylinders to achieve good synchronization. The sheet is pressed by hold-down before shearing and during shearing for safety and reliability. One-time machining on CNC lathe for cylinder body and piston rod. Horning for inner surface of cylinder, vibration super-fine machining on the outer surface of the piston rod. Oil seals from NOK, Japan (or Merkel, Germany) with low wear and tear, no oil leakage. High-pressure internal gear pump, with reliability and low noise. Over-load protection for hydraulic system 6. Electrical system Movable remote operation station with emergency stop. Main electrical components(contactor, button and switch) adopt product from TELEMECANIQUE from France. Requirement on working condition: Working temperature: -10 to 47 Power supply: 380V±5%, 50HZ, 3 Phase
FUSE SIEMEMS; FUSE-3ND1 365NH3 500A/690Va.c./120kA Quick release valve QF514 Shirt �?260x�?280x100 JC055.02.09 Stud M45 X520 QF36001-05.01A.04L Buffer AH0000060106 BOMCO pump IMNS1100A Multimedia Server https://www.amlppmfg.com/mechanical-seal-h22451-1a.html Bearing HHZJ40000193 Automatic transmission filter 29558331 cylinder body BG75B-15 notch gear 0101-37M Rubber hose HG4-761 pump RS-F-1000/800 harting HAN-BRID61044010429 XB160 vacuum circuit breaker control board Hydraulic Coupling for Steel Cord Bucket ST 1600YOX420 attaching equipment motor Y2-250-4 55KW Reducer B3SH7/BI=40 WASHER LOCK-REGULAR 50906-C 106-5534 dryer GFDZ370/130N-1200 Direct blowing fan Motor YB3-132S-4W 5.5 kW 1460 rpm 380/660v IM1001 EXdIIBT4Gb Hose Assembly Varco 59144P290099 Vibrating screen box DERRICK-2000 120 mesh HDF-2 Retaining Screw 992134 cotter pin 992012-76 Seal P100169 For: TWS-600S pump O-ring GB3452.1-82290 X73BOMCO Encoder Dynapar HS35R1024H382 Arbor for keyed cutters X Seal 1317809 Weatherford Sleeve kit HH-KLT-1015 4801010140 Chain 24SAX134 134 section GUIDE BAND L=380 FM3020W5140 Piston seal 72219 NOV TDS-10SH top drive. O-ring 9090125530 for Diverter DIV37-1/2"-500 Slope bar 12AZ-116 XYQ12/Z-01/07B Hydraulic tong top XYQ12/B-09A AC225001-3200 Operation Bar Indicator lamp AD-22DS red matriX d22 mm 230V AC BLS10-ADDS-K04 Nut M45 X 3 QF36001-05.01A.09L Pusher 3P100025 TWS pump-200 SPM pump plugger 8996 BEAM,TORQUE ANCHOR,64"OFFSET SEAL RING, PISTONGH3101-05.20 6I-2510 engine air filter Lug Jaw 3 1/2"-4 1/2" 45424 harting 9320000000� HAN46EE-F-C16A500V Flange gasket 29508400 Gas-water release valve JC135.02.23.00 GATE 316SS FOR 2" 5000 WP 51815908 harting connector 9300060301 Latch 01.02-28 for hydraulic tong ZQ 203/100 ZQ203-104 Filter for diesel tank BLX-400�?5X, NPT1-1/2" 2994 Turnbuckles Jaw X Jaw 1" X 12" GH3101-06.30Bolt, hollow HAMMERSEAL O RING SIZE.8" PS80OR T-seal 116.4�?103, JLK31 15/2.5-07-116.4�?103 512605010042501000 Oil suction filter Guide disk 17.01-02 ZQ162-50 HOUSING AISI C-1018 ITEM 19 J015332 Transfer shaft L=1550 5000700139 Tong Dies ZQ 162/50 for 104.8 mm Automatic Air Switch Miniature Circuit Breaker C65-3P-40A Schnider SC40-IP Marine and Industrial IP PTZ Camera Station REPAIR KIT VALVE 2" & 5" DGVRK250101 Water tap Z03110300001A for XJ-450 56052228 Water filter cartridge Release lever H7UB.82P 9T-0973 steering system filter Valve plate B210X3-3HUQB7201-92 5127040702 Anti-clash loop valve FP-L6 Roller part 0101.01.00M Jiangsu Rushi 423-8524 secondary fuel filter Seal YXD75 HH8S258WV Bolt PERKIN1817812C1 Weatherproof Obstruction Light SkyLine Alpha 2 harting connector 19300101521 Screw M6x20 ZQ203-070 FiXing clamp RS11306.05.025
PTO Shaft Replacement Of Weasler 6 Series Ever-power's High-Performance PTO drive shaft is one of the best drive shaft option in the lawn, agriculture and industry. Ever-power PTO drive shaft comprises a total unit that includes the tractor all the way to the implement. They are made for long-term heavy-duty usage and can meet the demands of large contractors and farms. Every the power PTO drive shaft is able to replace the Weasler brand 6 Series. Advantages Of Ever-power PTO shaft Adjustability of design (cutting in length) ability. It is interchangeable with many models from competitors. Spline and square shafts are both available. The simple locking mechanism permits quick and simple assembly or disassembly by using simple tools, such as coins, keys or screwdrivers. The extended lubrication electronic kit helps reduce downtime through intervals between lubrication of 50 and 250 Three lip seals with high temperatures will better hold grease. Customer-specific engineering and sales support. Design features It is easy to lock the protection system: offer all-encompassing coverage at the highest angle 360 degrees of friction welding of the protective cover, black ultraviolet, and ozone resistance. the cold-weather impact rating is -35 degrees Celsius which is more than the safety standards of all relevant standards as well as the disassembly the installation is quick and easy. -Yoke: interchangeable with other Ever-power yokes as well as conventional yokes sold that are available, with cast iron collars that have holes to stop debris from getting inside. Bearing kit and crossover High power and torque capacities, as well as longer life span. It is made from high-quality steel that increases the strength. The kit is able to be upgraded or swapped using the digital kit. The same design of components is used in Ever-power's home and metric lines. 6 Series PTO Shaft Parts 16Hp@540rpm 30Hp@1000rpm Part Number Cup Diameter Length (B) Snap Ring Series 1-1475 0.9687 1.453 Inside L6 6 Series Square Or Rectangular Parts Bar Yoke # Solid Shaft OD Spec Square Sleeve Tube Yoke Shield Shield Bearing Length Shield Bearing ID 69-0648 56-1600 48 1.83 69-0648 56-0600 48 1.50 900-2548 920-0260/ *0415169 48 1.375 6-Series Splined Parts Bar Yoke # Splined Shaft OD Spec Splined Sleeve Tube Yoke 302-0600 404-1615 1.00-15 1.00-15 510-0615 703-0600 301-0600 404-1615 1.00-15 1.00-15 510-0600 702-0600 6 Series Quick Connect Yokes Part Number Diameter No of Splines 101-0610 0.981 10 105-0615 1.00" 15 100-0621 1.375 21 100-0606 1.375 6 Six Series Clamp Yokes Part Number Diameter Number of Splines Bore c-e Length Clamp Type Notes Six series Clamp Yokes with Spline Clamp Yokes 06091-1461 .875 20 1.4 2.53 double bolt Splined 807-0615 1.00 15 1.2" 2.5" Splined 6 / 0600 Round Clamp Yokes 807-0614 0.875 .187 round 06091-2664 0.875 0.188 round 807-0616 1.00 0.250 round
Top Shower diameter is 8 inches,the back of the shower is chrome finish mirror surface,the outlet spout is the ABS plastic material.The shower heads connect to the stainless steel Shower Sliding Bar or the brass Slide Bar Shower in home shower faucet,wall mounted concealed mixer,bathroom wall mounted shower mixer.The Rain Shower Head is used for five years warrenty. Description of Top Rated Shower Head Name:Shower Head Brand:Handy Material:Plastic Surface finished:Chrome Size:1/2" Salt spray testing for 2 kinds of electro plating as follows: a) General plating: 24 hours / Acid; 120 hours / neutral b) Acid plating: 48 hours /Acid; 240 hours / neutral Guarantee time: 10 year MOQ: 200 pieces Packaging: Standard export package or Customized Payment by: T/T, Western Union Delivery: Shenzhen CHINA, 30 days after payment Fields of application:Bathroom shower head,bathroom faucet,shower set. SHOWER HEAD Competitive Advantage: 1. High-quality and Eco-friendly faucets: All faucets use #59 brass, durable ceramic cartridge, advance environmental protection electro-plated technology, more conducive to environmental protection. 2. Our faucets come with 10-year warranties. 3. Supply laser LOGO on faucet`s handle or body, paste products label on our neutral color box with our brand printing or OEM brand printing, MOQ for OEM of color box printing is 1000unit. 4. Individual Package: Individual package and 12 units packed with carton. 5. Easy Assembly: All hardware needed for mounting is included with faucet, assembly instruction along with every unit box.Single hole basin faucets 6. 100% of our products are tested before shipment. 7. Simples ready in 3 to 7 days. SHOWER HEAD We adopt gravity casting equipment to assure the density and uniformity thick of pipe. CNC processing equipment to assure the product`s Processing precision and using life. Advanced environmental protection electro-plated technology to prevent its second pollution, supply you more pure water and brightness is new even if it was used a long time. Our design combined with European advanced concept design, Fully consider for consumers, Focus on the use of consumers feeling. SHOWER HEAD We have passed ISO9001:2015, All produced "handy" products sell to Europe, South America, Sothern Asia and so on. Handy Iso9001 2015 FAQ: Q: How about payment terms? A: 30% TT deposit + 70% TT before shipment Q: Can you send a sample to us firstly? A: yes, we can. Sample is ready in 3 to 5 days. SHOWER HEAD "handy" products will continue to create novel and applied items that will lead the market to all customers in the world. SHOWER HEAD Bathroom shower head,top shower.handy bathroom shower accessories,bathroom accessories set.
Aneiz F10 flap turnstile-Support OEM and ODM. Support third-party biometric devices, such as fingerprint scanner, face recognition camera. RFID card reader, QR code scanner. Aneiz F10 flap turnstile is a high performance pedestrian control turnstile. Usually used in high pedestrian traffic flow in both directions to control pedestrian entry or exit in restricted areas 304 Stainless steel material, durable, high quality, for long lasting use. The F10 features designed with standard relay signal, which can integrate easily to any kind of access control and fire systems through I/O (dry contact). In case of emergency, when power goes off both directions are free. Passing Direction: Single directional / Bi-directional. FEATURES Aneiz F10 flap turnstile -The panels of the flap turnstile extend from a pair of optical revolving door cabinets, forming a pedestrian barrier in the middle of the two cabinets. Flap turnstile is an aesthetically pleasing security and access control solution. Aneiz F10 flap turnstile -The arms will automatically retract during power failure. Flap turnstile also can be triggered to permanently open during emergency to facilitate fast evacuation. This is complying with fire safety requirements. Aneiz F10 flap turnstile -Altogether, there are 5 million cycles, 304 Stainless steel material and brushless DC motor, which guarantee greater durability and longer equipment life. Aneiz F10 flap turnstile -The turnstile designed with consolidated and more durable mechanism, will not break even someone collide it, anti-collision and anti-kick function. Aneiz F10 flap turnstile -The flaps will close automatically if there is no pedestrian passing or passenger delay to entry. IR sensors detect unauthorized or abnormal access. Alarm buzzer function will be triggered when the user is passing thru without authorization, tail gaiting, illegal intrusion or incorrect direction. Aneiz F10 flap turnstile -Multiple Operating Modes-optional IC/ID card, key fob, QR/bar code, face / fingerprint / finger vein biometric recognition, push button, ESD, wireless remote control, insert coins / card / wristband, digit counter... Aneiz F10 flap turnstile TECHINCAL SPECIFICATION Material 304 Grade Stainless Steel Cabinet Dimension 1200(L) X 300(W) X 980(H)mm Arm Material Plexiglas-transparency Passage Width 550mm standard lane Throughput 40 to 45 people per minute Response Time â?¤0.3S Net Weight 65kg/pcs single core 85kg/pcs double core Directional Mode Uni-directional or bio-directional IR Sensor 3 pairs (standard) Power Supply AC220V/110V, 50/60Hz Power Voltage 24V DC Power Consumption 40W MCBF 5 million Operating Temperature -20 �°C - 75 �°C Operating Environment Indoor or outdoor (need with shelter) Relative Humidity 95% LED Indicators Red cross means gate open, Green arrow means gate closed Warranty 18 Months
SIDA Factory KBM-18B small automatic hydraulic dry ice pellets making machine, dry ice pelletizer, dry ice making machine, dry ice maker, dry ice machine, dry ice granular making machine, dry ice grain making machine, dry ice particle making machine, dry ice rice making machine. Technical Parameters: Model no.: KBM-18B dry ice pelletizer Raw material: liquid CO2 cryogenic tank (water content less than 60ppm) or dewar Size of dry ice pellets: 3mm, 14mm Output of dry ice making machine: 30kg/h Density of dry ice : >1500 kg/m3 Conversion rate of dry ice: 40% (100kg CO2 can produce 40kg dry ice) Motor power: 2.2kw, 3phase 380V 50Hz Run: hydraulic Volume of hydraulic oil tank: 20L Size (L*W*H): 700*435*680 mm Total weight: 110 kg Remarks: this product is the third generation improved, very reliable and perfect for users who sell less than 200kg dry ice per day. Main configuration of dry ice machine: 1.CPU and electrical equipment components are used from Korea. 2. Hydraulic pump is used oil pump from Japan. 3. Oil pump motor is used Qunce motor from Taiwan . 4. Hydraulic valve is used Yuken product from Japan. 5. Raw material control valve adopts foreign brand. Feature: 1.Desktop type design with stainless steel shell, only 1/3 land occupation than other same products. 2. Full automatic CPU control system and advanced hydraulic system design with imported components used, more reliable. 3. Special design can still keep good running when the liquid CO2 water content is high. 4. Patented recycle technology of waste CO2 gas to cool hydraulic oil tank to make sure working temperature below 400C, enable the components lifetime are longer and the machine can run 24 hours continuously. 5. Equipped trundles, easy to move. 6. Different size pellets can be produced by changing extruder mould. 7. This product is the third generation improved, very reliable. Application: 1.Used for produce high density dry ice pellets 3mm for dry ice blasting cleaning. 2. Also used for produce larger dry ice particles for cooling purpose. 3. The dry ice grains are widely used for tyre production enterprises, precision casting, printing, engine maintenance and other enterprises as the raw material of dry ice jet cleaning; refrigerated transportation and catering entertainment industry to do fog and cloud effect. Production Steps: 1. Gas company 2. Liquid CO2 cryogenic tank or dewar 3. Dry ice pelleting machine 4. Dry ice storage box
SIDA Factory KBM-80 automatic hydraulic dry ice pellets making machine, dry ice pelletizer, dry ice making machine, dry ice maker, dry ice machine, dry ice granular making machine, dry ice grain making machine, dry ice particle making machine, dry ice rice making machine. Technical Parameters: Model no.: KBM-80 dry ice pelletizer Raw material: liquid CO2 cryogenic tank (water content less than 60ppm) Size of dry ice pellets: 3mm, 16mm Output of dry ice making machine: 80kg/h Density of dry ice: >1500 kg/m3 Conversion rate of dry ice: 40% (100kg CO2 can produce 40kg dry ice) Motor power: 4kw, 3phase 380V 50Hz Run: hydraulic Volume of hydraulic oil tank: 60L Size (L*W*H): 780*660*1200 mm Total weight: 400 kg Remarks: This product is suitable for users who sell less than 1000kg dry ice per day. Main configurations of dry ice machine: 1.CPU and electrical equipment components are used from Korea. 2. Hydraulic pump is used plunger type variable oil pump from Taiwan. 3. Oil pump motor is used Qunce motor from Taiwan . 4. Hydraulic valve is used Yuken product from Japan. 5. Raw material control valve adopts foreign brand. Feature: 1. Exquisite design with stainless steel shell, only 1/2 land occupation (0.6m3) than other same products. 2. Full automatic CPU control system and advanced hydraulic system design with imported components used, more reliable. 3. Special design can still keep good running when the liquid CO2 water content is high. 4. Patented recycle technology of waste CO2 gas to cool hydraulic oil tank to maintain best working temperature at 40~500C, enable the components lifetime are longer and the tank volume is small, only need 60L, while 150L for other same products. 5. Different size pellets can be produced by changing extruder mould. Dry ice pelletizer application: 1. Used for produce high density dry ice pellets 3mm for dry ice blasting cleaning. 2. Also used for produce larger dry ice particles for cooling purpose. 3. The dry ice grains are widely used for tyre production enterprises, precision casting, printing, engine maintenance and other enterprises as the raw material of dry ice jet cleaning; refrigerated transportation and catering entertainment industry to do fog and cloud effect. Production Steps: 1.Gas company 2. Liquid CO2 cryogenic tank 3. Dry ice pelleting machine 4. Dry ice storage box
3-Way Air Solenoid Valve 5M3V410-15NC for Obra power YOYIK relies on a senior technical team, including senior engineers who have participated in major hydropower projects such as Gezhouba and Three Gorges, to provide accurate equipment upgrades and technical transformation solutions. The company strictly follows national standards and is equipped with precision machining equipment to ensure high-quality output in every link, meet the special needs of various power stations and steel companies, and set an industry benchmark. #DF-3-Way Air Solenoid Valve 5M3V410-15NC-DF Solenoid valve 24102-12-4R-B12, I-24-DC-16 AST/OPC Solenoid valve 4WE10D50/EG110N9DK6L/V pressure relief valve YSF16-55/130-KJ pneumatic servo valve G771K201A HP Regulating valveactuator unloading valvesealing set CVCS-32-A-B29-W-10 Servo valve D634-528A Pump coupling HSND280-54 Sinro Motorized Valve SR04GB32046B4 The electromagnetic valve CVCS 32 A3 W 20 Fluorine rubber O-ring �?15*�?11*2.4 HPU Hydraulic Oil Pump 160YCY14-1B horizontal centrifugal pump price YCZ50-250C/L=600mm gas valve kit accumulator charge fittings A-10/31.5-L-EH actuator solenoid valve 4WE6C69EG24N9K4B08 key DG600-240-07-03-08 oil pump PVH74ROIA-RSM-IS-10-C25-3 barring gear turbine 3WMM10B-L40/FV pressure hose S110-AC-FC-0150 Emergency shutdown solenoid valve 4WE6D6X/EG220N9K4 electric pump 65AY100 screw pump HSNH280R54M5TQ Pneumatic actuator F05F07-N-DS-14 AZNX solenoid valve 220v ac PAT.5002253 230VDC/19W Wet solenoid directional valve 4WE10Y5X/EG110N9DK6L/V 24v dc valve DG4V-5-2NJ-M-U-H6-20 rotary vacuum pump oil P-1758 hydraulic pump oil PVH98QIC-RSF-1S-10-C25-31 Fluorine rubber O-ring �?27*2 pressure relief valve YSF9-55/130 Membrane check valve KS025SZDA64Q 0.05-1.6Mpa servo valve 078N208D2 3-Way Air Solenoid Valve 5M3V410-15NC 3-Way Air Solenoid Valve 5M3V410-15NC MY-DFYL-2024-7-2
APPLICATION Work with oxygen, acetylene, L.P.G. and non-combustible gases. Produced according to BS 5120, ISO 3821, EN 559, DIN 8541, SIS 278265, I.S. 714. CONSTRUCTION Tube: Seamless. Synthetic rubber suitable for welding gases. Reinforcement: High tensile synthetic fibers. Cover: Red, blue, black, Construction: Inner Tube:Black Extruded SBR & NR synthetic rubber Reinforcement:High tensile synthetic polyester yarn multi-spiral. Cover:High tensile synthetic abrasion and weather resistant rubber, smooth blue, red, or green Cover. Working Pressure:Constant Pressure 20 Bar / 300 psi Temperature Range:-30+80 (-22 F 176F) Application:Mainly used to convey oxygen and acetylene gases for welding and cutting equipment, inert gas (such as argon gas and helium gas etc.) Feature: Mandrel extrusion technology Free OEM Color & Brand Service Packing as customer request Welding hose also called flexible reinforced welding hose, rubber twin welding hose, reinforced twin welding hose pipe line. It is mainly used for conveying of oxygen and acetylene for welding and cutting equipment. The appearance of the twin line hose is bright. The body is soft and light, which is hardly distortedunder pressure. Sizes:3/16, 1/4, 5/16, 3/8, 1/2 Gas transporting: oxygen, acetynele, carbon dioxide, nitrogen propane, liquefied natural gas. Our welding hoses are widely used in automobile, shipbuilding, steel structure construction, railway, nuclear power, chemical, tunnel, nechanical processing and other field. The welding rubber hose is mainly used for conveying of oxygen and acetylene gases for welding and cutting equipment. Abrasion resistant, weather resistant and zone resistant. It is flexible, light weighted, anti-bending. Our Twin Welding Hose is made of black synthetic rubber with high tensile synthetic textile reinforcement. Hose is resistant to oxygen and acetylene. Rubber Welding Hose needs a flexible and rugged Hose Pipe for the flow of Air-Oxygen and a Fuel Gas like Acetylene among other. Synthetic Rubber with special treatment for Flame, Heat and Oil resistance is being used to produce this hose. Special treated synthetic yarns are used for reinforcement.
Product Name- Outdoor Aluminum Retractable Louvered Roof Waterproof RGB Lighting Modern Dimmable Rolling Roof Bioclimatic Pergola System Category- Home & Garden>Garden Supplies>Garden Buildings>Arches, Arbours, Pergolas & Bridge Place of Origin- TURKEY IZMIR Brand Name- SKY ART Model Number- SKY 015 Accepted payment type- T/T Delivery Time- 19 days Nearest Port- Izmir , �°stanbul , Mersin Attribute Name1: Name and Value- Aluminum Alloy AL6063 T10 Attribute Name2: Name and Value- Single or Double TEMPERED GLASS Attribute Name3: Name and Value- AISI304-INOX Fittings Attribute Name4: Name and Value- CLEANABLE Special System FOB Currency- USD Unit- Piece FOB Price/Unit- Get Latest price Minimum Order Quantity- 1 piece Product Description- "Rolling Roof Bioclimatic System can adjust the shading on your terrace thanks to their fully automatic smart lamellas. It offers full protection from direct sunlight, allowing as much sunlight as desired and full opening options. It allows you to regulate the natural ambient temperature when opened, and to create a water-resistant, fully enclosed environment when fully closed. It is the ideal option for use in hotels, private homes, restaurants, bars and premium entertainment venues. It offers different variations according to your needs. Adaptable to the architecture of your existing space or self-supporting installation variations can be provided. Its special design, which provides ease of installation, allows its assembly to be completed in just one day. With its materials made of aluminum and stainless steel, it is resistant to the negativities of time for many years. Wind Load Resistance Test UNE-EN 13659: 2004 Class 6 // (approx. 112 km / h) not tested up to 190 km / h. No breakage was detected. Snow Load Resistance Test Standard EN-1999 EUROCODE 9 // 100 kg / m�² (including its own weight) aluminum structures project Rain Test Standard UNE-EN 12056-3 // (0.03 l/s max) Fixed heavy rain approx. 108 l.m�²/h (structures + lamels) Finishes 10 years of warranty for finishes." Packaging and Shipping- As Per International Standard Shipping- International Shipping Exchange Policies- Free exchange for quality issues
Product details Brand PandaHardwares Color gold/silver Material metal Shape Ellipse, Oval There are different handmade patterns. There are silver, gold, and other colors to choose from. It is a timeless product. Itâ??s perfect for gift-giving. Suitable for birthdays, home gifts, and company business gift products. Turkish service tray. You can display your kettle and glasses on the tray. Use as a tea and coffee tray, food tray, makeup tray, perfume tray, wine, whisky, wine tray, or bar tray. You can use it as candy and chocolate trays. You can put your decorations, candles, and flowers on it and use them as a table tray. You can use it as a plate under the vase. Specially designed trays are cleaned with a wet cloth without chemical cleaners if food or liquid is spilled. Elegant Turkish tray, suitable for indoor and outdoor use. You can hold the handle and use it comfortably for the handling tray. If you have any questions about our products, donâ??t hesitate to get in touch with us. Product description. It is an Ottoman embroidered tray specially used by Turks in Turkish coffee service. Used for tea, coffee, dessert, and appetizer service. Used for perfume storage, makeup, and jewelry layout. A timeless and elegant ornament. In addition to serving as service pallets, you can use these trays with gold and silver and exquisite patterns to create an eye-catching fashion style in every area of your home. They are very fashionable products, suitable for daily use and invitation. These trays, where Turks primarily serve Turkish coffee, meet with patterns and will be one of your favorite items. A fashionable way to provide drinks. They are used for snacks, wine trays, whisky trays, wine trays, or other drinks such as tea and coffee. It can also be used as a serving tray, pitcher tray, and organizer in your bedroom or dresser. You can use it to add elegance to your kitchen. Material: this silver and gold tray is made of high-quality metal. If you have any questions about our products, please get in touch with us. we started manufacturing gold and silver platedserving trays for home users in 2013 and now wehave decided to expand our range of productsand started manufacturing high-quality Turkishgift products. We are aiming to fulfill the needsof the market with the most elegant ServingTrays in various design, handles and platingalternatives. Different materials and finishing we provide: Stainless Steel (Silver / Satin / Mirror finish), Iron Gold / Silver / Antique Gold / Metallic Bronze / Pewter / Nickel / Chrome.
we are export: Ready Made Garments Product, Yarn and Fabric. Supply All kind of Paper For Printing and Packaging, Yarn, Textured Yarn, Spun polyester, Cotton Yarn, Filament Yarn, weft and warp Yarn, Petrochemicals Product PP, LLDPE, HDPE, HIPS, Commodities Product Corn, Wheat, Wheat Flour, Soybean seeds, Sunflower seeds, Rape seeds Vegetable Oil, Cooking oil, Soybean Oil, Sunflower oil, Rapeseed oil, Sorghum, Barley, Rice ,Sugar, Burley , Sugar Beet Pulp, Milk Powder , Oats, Edible Oils, Coffee, Cocoa Petroleum Product 60/70 Bitumen, Diesel 50 ppm, Gasoline 93/95, Diesel fuel EN590, Aviation turbine fuel. (Jet A1), Gasoline 95, AVIATION KEROSENE JET FUEL, MAZUT, D6 VIRGIN FUEL, LIQUEFIED PETROLEUM GAS, LIQUEFIED NATURAL GAS, BASE OIL, EN590 10 PPM. Petroleum, Crude oil, gas condensate Mining Product Bituminous Coal, Black Carbon, Petroleum Coke, Nickel Ore, Gold bullion , Gold Dust/Gold Bars, Tin, Silver, Gems, Cobalt, Coltan, Talc, iron ore, manganese ore, zinc ore, Milestone, Clinker ,Stone, Lithium ore , lithium carbonate Chemicals Product Sulphur, Magnesium Potassium chloride, Potassium hydroxide, Ammonium nitrate propane, butane, ethanol Calcium Hypochlorite 45kg/drm (India) Chlorine Tablet (50kg/drm) China Citric Acid (25kg/bag) China Boric Acid (25kg/bag) Russia/Europe Ferric Chloride (300kg/drm) India Nitric Acid 60% (35kg/drm) Europe Ammonium nitrate 6484-52-2 Magnesium Nitrate 13446-18-9 Magnesium acetate 16674-78-5 Magnesium citrate 144-23-0 Caustic soda,Calcium carbide, Sodium, hydrosulphide, sodium metabisulfite, xanthates, Ferrous sulphate, Monohydrate Fertilizer UREA, DAP, MOP, NPK, MAP,MKP, TSP Fertilizer products, Organic Fertilizer. Cocopeat Aluminum Steel, Copper Product Aluminum Ingot A7, Copper Cathode, zinc, lead , rubber, iron silicate, garnet sand, used rails Scarp HMS 1& 2 Animal Feed: Corn, Barley, Rice Burn, Wheat Burn, Alfalfa, Sunflower meal, Rapeseed meal, Soybean meal, if you need any help to source right product, the right price, right time send me your requirements. Have any opportunity or partnership for business Execute feel free to contract any time Expecting your soonest reply.
Specification Material : polyurethane coated wire rope Aperture shape :square or rectangular Aperture range : 2mm to big Wire rope diameter range : 1.5mm to big Description Tufflex is polyurethane coated stainless steel wire rope screen with the same open area as woven wire and huge advantages over traditional screens. The Tufflex screen is made up of two types of ropes welded together. The rope running from hook to hook is a wire rope with a thick polyurethane covering. This rope, with the wire, allows the hooked edge screen to be tensioned like other hooked edge screens, with no modifications to machinery required. The same maintenance procedures of checking the screen tension applies to Tufflex screens. The other rope is made up of a fine synthetic cord, also with thick polyurethane covering, and runs parallel to the hooked edge. For side-tensioned set-ups, this rope acts like rider bars for larger stones to slide down the deck, channelling smaller ones closer to the apertures. This increased stratification improves screening efficiency. With the end-tensioned screens, this rope can be used on top, running in a cross-flow orientation, or positioned underneath the rope with the wire. Features Tufflex is a polyurethane-coated screen media that can be substituted for traditional woven wire screens with minimal adjustment to the screen deck. Available in several combinations of both rope and wire diameter and aperture size, Tufflex offers additional customisation options via partially or fully welded screen cloths. The smooth surface of the polyurethane prevents sticking and blinding, which is further enhanced by the flexibility offered by Tufflex s cloth construction. The Tufflex cloths not only improved the quality but also minimised blinding, improved efficiency and have great wear. this provides the site with longer periods between changeover and less downtime during busy screening periods. The available range of Tufflex screens is extensive, with aperture sizes ranging from 1.5mm to 45mm and square and rectangular aperture shapes, similar to woven wire. The wire rope diameter ranges from 1.5mm to 12mm, with custom-made rectangular slots as fine as 0.7mm wide. The construction varies with either fully or partially welded wires.Sheets of poly can also be welded on for impact protection or enhanced abrasion protection along the hooks.
Specification Material : polyurethane coated wire rope Aperture shape :square or rectangular Aperture range : 2mm to big Wire rope diameter range : 1.5mm to big Description Tufflex is polyurethane coated stainless steel wire rope screen with the same open area as woven wire and huge advantages over traditional screens. The Tufflex screen is made up of two types of ropes welded together. The rope running from hook to hook is a wire rope with a thick polyurethane covering. This rope, with the wire, allows the hooked edge screen to be tensioned like other hooked edge screens, with no modifications to machinery required. The same maintenance procedures of checking the screen tension applies to Tufflex screens. The other rope is made up of a fine synthetic cord, also with thick polyurethane covering, and runs parallel to the hooked edge. For side-tensioned set-ups, this rope acts like rider bars for larger stones to slide down the deck, channelling smaller ones closer to the apertures. This increased stratification improves screening efficiency. With the end-tensioned screens, this rope can be used on top, running in a cross-flow orientation, or positioned underneath the rope with the wire. Features Tufflex is a polyurethane-coated screen media that can be substituted for traditional woven wire screens with minimal adjustment to the screen deck. Available in several combinations of both rope and wire diameter and aperture size, Tufflex offers additional customisation options via partially or fully welded screen cloths. The smooth surface of the polyurethane prevents sticking and blinding, which is further enhanced by the flexibility offered by Tufflexs cloth construction. The Tufflex cloths not only improved the quality but also minimised blinding, improved efficiency and have great wear. this provides the site with longer periods between changeover and less downtime during busy screening periods. The available range of Tufflex screens is extensive, with aperture sizes ranging from 1.5mm to 45mm and square and rectangular aperture shapes, similar to woven wire. The wire rope diameter ranges from 1.5mm to 12mm, with custom-made rectangular slots as fine as 0.7mm wide. The construction varies with either fully or partially welded wires.Sheets of poly can also be welded on for impact protection or enhanced abrasion protection along the hooks.
