Multiple Protections:  Dry run protection Phase loss protection Overload/no load protection Short circuit protection Over-voltage protection Pump stalled/antiseizing protection Undervoltage protection Pump shaft rust protection Major Features: 1,Pressure control: electric contact pressure gauge or pressure switch 2,Water level control: probe or float switch 3,Multifunction display â?? visualization of: voltage, motor current, upper/lower tank status and alarms 4,Upper tank for water supply control and lower tank for drainage control 5,Operation mode: AUTO/MANUAL switch 6,Fault indication: fault tracking,last 10 fault reason display,audio/light alarms. 7,Anti-card protection,long-term non-use of the pump, 15 days to start once. 8,Setting protection current for motor overload/no-load,no-load delay restart time adjustable. 9,Automatic restart when voltage comes to normal rating after over-voltage/under-voltage protection. 10,Automatic restart after power failure recovery. 11,Time setting ON/OFF 12,Push button for adjustments and set up from display 13,Restore factory setting: press both "Overload" and "NO-Load"for 3 seconds. 14,Automatic re-starting pump from dry running,restart time range 0-999 minutes adjustable.
Multiple Protections:  Dry run protection  Phase loss protection Overload/no load protection  Short circuit protection Over-voltage protection  Pump stalled/antiseizing protection Undervoltage protection  Pump shaft rust protection Major Features: 1,Pressure control: electric contact pressure gauge or pressure switch 2,Water level control: probe or float switch 3,Multifunction display â?? visualization of: voltage, motor current, upper/lower tank status and alarms 4,Upper tank for water supply control and lower tank for drainage control 5,Operation mode: AUTO/MANUAL switch 6,Fault indication: fault tracking,last 10 fault reason display,audio/light alarms. 7,Anti-card protection,long-term non-use of the pump, 15 days to start once. 8,Setting protection current for motor overload/no-load,no-load delay restart time adjustable. 9,Automatic restart when voltage comes to normal rating after over-voltage/under-voltage protection. 10,Automatic restart after power failure recovery. 11,Time setting ON/OFF 12,Push button for adjustments and set up from display 13,Restore factory setting: press both "Overload" and "NO-Load"for 3 seconds. 14,Automatic re-starting pump from dry running,restart time range 0-999 minutes adjustable.
Multiple Protections Dry run protection Phase loss protection âOverload/no load protection â? Short circuit protection â? Over-voltage protection â? Pump stalled/antiseizing protection â? Undervoltage protection â? Pump shaft rust protection Major Features: 1,Pressure control: electric contact pressure gauge or pressure switch 2,Water level control: probe or float switch 3,Multifunction display â?? visualization of: voltage, motor current, upper/lower tank status and alarms 4,Upper tank for water supply control and lower tank for drainage control 5,Operation mode: AUTO/MANUAL switch 6,Fault indication: fault tracking,last 10 fault reason display,audio/light alarms. 7,Anti-card protection,long-term non-use of the pump, 15 days to start once. 8,Setting protection current for motor overload/no-load,no-load delay restart time adjustable. 9,Automatic restart when voltage comes to normal rating after over-voltage/under-voltage protection. 10,Automatic restart after power failure recovery. 11,Time setting ON/OFF 12,Push button for adjustments and set up from display 13,Restore factory setting: press both "Overload" and "NO-Load"for 3 seconds. 14,Automatic re-starting pump from dry running,restart time range 0-999 minutes adjustable.
Forklift Series Lithium Iron Phosphate Battery Pack Parameters Series parameters Remarks No Items 48V 72V 80V 1 Cell material type Lithium iron phosphate 2 Nominal voltage 51.2 76.8 83.2 3 Operating voltage range 40-58.4 60-87.6 65-94.9 4 Nominal capacity 172-700 Customizable within the range 5 Charge cut-off voltage 58.4 87.6 94.9 6 Discharge cut-off voltage(V) 40 60 65 7 Standard charging current(A) 1 Constant current charging at 25 C ambient conditions 8 Standard discharge current (A) 1 Constant current discharge at 25 C ambient conditions 9 Discharge operating temperature range 10 Charging temperature range 11 Storage ambient temperature) (-20 - 55, short term, within 1 month; 0 - 35, long term, within 1 year) 12 Storage environment humidity(RH) 5% 95% 13 Humidity of the working environment(RH) 85% 14 Cycle life at room temperature 25 C, 3000 cycles (80% of rated capacity) 1C charge/discharge multiplier 15 High temperature cycle life 45 C, 2000 cycles (80% of rated capacity) 1C charge/discharge multiplier 16 Self-discharge rate at room temperature(%) 3%/month, 25 C 17 High temperature self-discharge rate (%) 5%/month, 45 C 18 High temperature discharge performance 95% (1. Battery charged in standard charging mode (battery charged at 1C constant current and constant voltage to 3.65V, cut-off current 0.05C; discharged at 1.0C constant current to a minimum discharge voltage of 2.5V at 45 C 2) 19 Low temperature discharge performance 70% (1. Battery charged in standard charging mode (battery charged at 1C constant current and constant voltage to 3.65V; discharged at 0.2C constant current to 2.5V at -20 2C) 20 Case size Customised according to customer requirements 21 Control systems BMS solutions
Forklift Series Lithium Iron Phosphate Battery Pack Parameters Series parameters Remarks No Items 48V 72V 80V 1 Cell material type Lithium iron phosphate 2 Nominal voltage 51.2 76.8 83.2 3 Operating voltage range 40-58.4 60-87.6 65-94.9 4 Nominal capacity 172-700 Customizable within the range 5 Charge cut-off voltage 58.4 87.6 94.9 6 Discharge cut-off voltage(V) 40 60 65 7 Standard charging current(A) 1 Constant current charging at 25 C ambient conditions 8 Standard discharge current (A) 1 Constant current discharge at 25 C ambient conditions 9 Discharge operating temperature range 10 Charging temperature range 11 Storage ambient temperature (-20 - 55, short term, within 1 month; 0 - 35, long term, within 1 year) 12 Storage environment humidity(RH) 595% 13 Humidity of the working environment(RH) 85% 14 Cycle life at room temperature 25°C, 3000 cycles 80% of rated capacity) 1C charge/discharge multiplier 15 High temperature cycle life 45°C, 2000 cycles (80% of rated capacity) 1C charge/discharge multiplier 16 Self-discharge rate at room temperature 3%/month, 25°C 17 High temperature self-discharge rate 5%/month, 45°C 18 High temperature discharge performance 95% (1. Battery charged in standard charging mode (battery charged at 1C constant current and constant voltage to 3.65V, cut-off current 0.05C; discharged at 1.0C constant current to a minimum discharge voltage of 2.5V at 45 19 Low temperature discharge performance 70% (1. Battery charged in standard charging mode (battery charged at 1C constant current and constant voltage to 3.65V discharged at 0.2C constant current to 2.5V at -20±2C) 20 Case size Customised according to customer requirements 21 Control systems BMS solutions
1.Alkalized Premium Cocoa Powder US$ 2.950/ MT / FOB Jakarta, Indonesia * Fat content: 10% -12% * pH level: 6.8 - 7.2 * Fineness: (+/-) 99% * Color: Brown, Dark Brown * Moisture: 5% Max * Ash Content: 12% Max * Flavor: The best cocoa taste * Smell: the nice smell of cocoa * Shelf Life: 2 Years From Manufacturer date 2.High Quality - Alkalized Cocoa Powder US$ 1.550 / MT / FOB Jakarta, Indonesia * Fat content: 10% -12% * pH level: 6.8 - 7.2 * Fineness: (+/-) 99% * Color: Brown, Dark Brown * Moisture: 5% Max * Ash Content: 12% Max * Flavor: Nice cocoa taste * Smell: the nice smell of cocoa * Shelf Life: 2 Years From Manufacturer date 3.Natural Premium Cocoa Powder US$ 2.800 / MT / FOB Jakarta, Indonesia * Fat content: 10% -12% * pH level: 5.4 - 6.7 * Fineness: (+/-) 99% * Color : Brown, Dark Brown * Moisture : 5% Max * Ash Content : 8% Max * Flavor: the best cocoa taste * Smell: the nice smell of cocoa * Shelf Life: 2 Years From Manufacturer date 4.High Quality Natural Cocoa Powder US$ 1.500/ MT / FOB Jakarta, Indonesia * Fat content: 10% -12% * pH level: 5.4 - 6.7 * Fineness: (+/-) 99% * Color : Brown, Dark Brown * Moisture : 5% Max * Ash Content : 8% Max * Flavor: Nice cocoa taste * Smell: the nice smell of cocoa * Shelf Life: 2 Years From Manufacturer date 5.Natural Low Fat US$ 1.300/ MT / FOB Jakarta, Indonesia * Fat Content: 4% -8% * pH level: 5.0 â?? 6.0 * Fineness: (+/-) 99% * Color: Brown, Dark Brown * Moisture: 5% Max * Ash Content: 8% Max * Taste: Nice cocoa taste. * Smell: A special and nice smell of cocoa * Shelf Life: 2 Years From Manufacturer date 6.Alkalized Low Fat US$ 1.350/ MT / FOB Jakarta, Indonesia * Fat content: 4% -8% * pH level: 6.8 - 7.2 * Fineness : (+/-) 99% * Color : Brown, Dark Brown * Moisture : 5% Max * Ash Content : 12% Max * Taste : Nice cocoa taste. * Smell: A special and nice smell of cocoa * Shelf Life: 2 Years From Manufacturer date Description - Information Product Negatuve /Sterilization from Bacteria (salmonella and E coli) - Of 2 Types Product (Natural, Alkalized) - All Specifications and price above are include in the FOB - JAKARTA Price - Monthly capacity 300 until 400 Metric Tone -Load 1x 20 foot container =17 Metric Tone Payment -LC at Sight 100% in Advance -TT,Down Payment 60% , 40% Finished Production
ENGINE: 4.0 L, 6-CYLINDER, PETROL, VVT-I MAX OUTPUT: 228 HP / 5200 RPM (170 KW) MAX TORQUE: 360 NM / 3800 RPM 5 SPEED MANUAL TRANSMISSION FRONT & REAR DIFFERENTIAL LOCK POWER SIDE VIEW MIRRORS, CHROME PLATED FRONT BENCH SEAT (3 PASSENGERS) MANUAL AIRCONDITIONING GLOVE BOX COOLING VENT SAHARA MIGHTY 79 CONVERSIONS DETAILS RKC FAB CUSTOM FRONT BUMPER WITH BULL BAR RKC FAB CUSTOM ROOF RAIL RKC FAB CUSTOM SNORKEL RKC FAB CUSTOM FENDER RAILS RKC FAB CUSTOM SIDE STEPS EVO CORSE RIM 17"0" H&R WHEEL SPACER CUSTOM EXHAUST TAILPIPE 2.5 KING SHOCK ADJUSTABLE TO 3" TO 5" KING STEERING STABILIZER TIRE: MILESTAR 315/17/17 DOBISON 3-INCH COIL FRONT DOBINSON LEAF SPRING DOBINSON FRONT AND REAR SWAY BAR DOBINSON ABS BRACKET SPACER KIT 70 SERIES DOBINSON U BOLT KIT DOBINSON POLYURETHANE BUSH KIT DOBINSON SHACKLE KIT AND SHACKLE PIN DOBINSON BRAKE EXTENSION PROPORTIONING VALVE ADJUSTER DOBINSON SWAY BAR EXTENSION RK ROBUST 12000LBS WINCH BYSON CELLULAR ANTENNA X 2 CUSTOM SEATS CUSTOM CUP HOLDER CUSTOM STEERING WHEEL ALUMINIUM CANOPY ALUMINIUM CANOPY TRAY X 1 3000W KISAE SMART INVERTER KISAE INVERTER CHARGE CONTROL PANEL DC-DC CHARGER WITH MPPT SOLAR 10-35V DC CRUISE LIGHT WIRELESS CONTROLLER 200AMP BATTERY BACK-UP 22OV WALL SOCKET WATER TANK 75LTR WITH AUTOMATED PUMP WATER GAUGE ARB TWIN COMPRESSOR CANOPY ROOF RACK SHOWER TENT ROOT TOP TENT REFRIGERATOR 48LTR DELONGHI DOLCE GUSTO COFFEE MACHINE RKC FAB CUSTOM DRAWER RKC FAB CUSTOM TIRE CARRIER RKC FAB CUSTOM PULL-OUT TABLE RKC FAB CUSTOM FOLDABLE LADDER RKC FAB CUSTOM EXTERNAL STORAGE RKC FAB CUSTOM TOOLS DRAWER RKC FAB CUSTOM ROOF & DOOR MOLLE PANEL SIBERIA DRC 50" STRANDS LIGHTBAR RLB ROCK LIGHTS SIBERIA MULTIPLE OPTIONS TAIL LED
2.Technical parameters: 1. Box size in the laboratory: DL-120LA W1200 * D1000 * H500 (mm), Approximate dimensions: 2300 * 1300 * 1400mm, 2 standard temperatures, Laboratory temperature: nss acss 35 ± 1 /pass 50 ± 1 Pressure bucket humidity: nss acss 47 ± 1 /pass 63 ± 1 , Salt water temperature: 35 ± 1 It can be heated without water, 3 volumes, Laboratory capacity: 800L Salt water tank capacity: 40L, 4 compressed air, Compressed air pressure: 1.00 ± 0.01kgf/c 5 spray volume: 1.0-2.0ml/80c /h, 6 spray mode: continuous spray, timed spray, programmable spray, intermittent spray, demisting in the box, 7. Power supply: AC220V 50Hz/20A, 8. Material: The entire PVC board is made, and the salt spray testing machine adopts advanced three-dimensional reinforcement technology internally, with a strong and solid structure that never deforms. 9. Water adding method: An automatic water adding system is adopted, which has the function of automatically replenishing the water level when the water level is insufficient, and the test is not interrupted. 10. Nozzle: Precision glass nozzle, salt spray testing machine used for 4000 hours to ensure no crystal blockage. 11. Protection system: Equipped with dual over temperature protection and insufficient water level warning to ensure safe use. 12. Temperature controller: digital display, PID control, high stability platinum temperature probe, error 0.3 13. Heating method: The laboratory adopts direct steam heating method, which increases the temperature quickly and shortens the standby time of the salt spray testing machine. 14. The spray tower is equipped with two conical dispersers, which have the functions of guiding fog, adjusting fog volume, and even fog falling. 15. The pressure bucket adopts Henry's law to heat and humidify, and provide the humidity required by the salt spray testing machine laboratory. 16. Opening method: Pneumatic automatic opening is adopted, The salt spray testing machine is one of the "three prevention" (humid heat, salt spray, mold) testing equipment for artificial climate environments. It is an important salt spray testing equipment for studying the adaptability and reliability of various environments in industries such as machinery, national defense, light industry, electronics, light industry electronics, and instruments. This salt spray testing machine can perform neutral salt spray tests in accordance with GB/T2423.17 "Basic Environmental Testing Regulations for Electronic and Electrical Products - Test Ka: Salt Spray Test Method", and can also perform acetate spray tests. This salt spray tester complies with CNS, ASTM, JIS and ISO standards. The salt spray test is to test the corrosion resistance of the products after coating, electroplating, Anodizing, anti-rust oil and other anti-corrosion treatments on the surfaces of various materials.
Digital Rail Head Wear Gauge is is mainly used to measure the vertical wear and lateral wear of the rail. The reasonable design makes it light, convenient operation and intuitive reading. FEATURE 1. Digital type with direct readings: LCD display screen, clear and readable; No calculations required, gives direct reading ; When reading, hold down the HOLD button to fix the measurement value and facilitate reading. 2. High measuring accuracy : The measurement accuracy is 0.01m 3. Easy to use, measure the vertical and lateral rail wear at the same time, Position the rail wear gauge on the outer side of the rail . Push the vertical and lateral rail wear gauge so that the measuring probe is in contact with the upper surface and inner side of the rail respectively. Then the vertical and lateral wear of the rail can be read. 4. Metric /imperial unit 5. Support customize: We could customize all kinds wear gauge according to different rail profiles and different measure points. 6.Fast calibrate: One-key zero clearing function, can be quickly calibrated before each use to reach the factory measurement accuracy. 7. Magnetic fixed part: Strong magnetic fixed part to attach to the rail. 8. Rail fillet as measuring base to ensure measure data more accuracy Rail fillet is more clear than rail bottom, no dust. It could ensure the measure result reliability. 9. Portable Handle : This product is designed with a handle that is easy to hold, which greatly improves the portability of the product. It can avoid touching the ruler body directly, cause the ruler body to be stained and corroded, improve the product service life. Model LJ-GM-A Center vertical wear measure range0-15mm Lateral wear measure range0-25mm Score value0.1mm Indication error ± 0. 15mm Supply CustomizeUIC60/60E1, UIC54 /54E1, 115RE 68TR ect all profiles Block customize block for gauge
21.5 Inch 1920x1080 FHD 30PIN LVDS-Double IPS 600nits Open Frame LCD EX21501-A01 is a 21.5 inch 19201080 Resolution IPS TFT LCD module that supports LVDS interface. It can be operating at temperatures from 0~50 and storage temperatures range from -20~65. And, it features with 600(nits) high brightness and wider viewing angle technology. Open frame tft display is Suitable for industrial and medical imaging self-service terminals retail terminals supermarket checkout machines,etc. General Specifications of� 21.5 Inch 1920x1080 FHD 30PIN LVDS-Double IPS 600nits Open Frame RGB vertical stripe No. Item Specification 1 LCD size 21.5 INCH 2 Resolution 19201080 3 Active area 476.64(H)268.11(V)mm 4 Module size 487.54(H)279.684V1.335Dmm 5 Interface LVDS-Double 6 Brightness 600cd/m2 7 Contrast Ratio 4000:1 8 Pixel arrangement 9 Surface Treatment Anti-Glare� 10 Display Colors 16.7M 11 Polarizer Transmissive 12 Display mode Normally Black As a professional tft module factory, we provide tft lcd display module, ips tft capacitive touchscreen, ips capacitive, ips capacitive screen, ips lcd capacitive, ips touch panel, ips capacitive touchscreen, ips lcd touch screen, ips lcd capacitive touchscreen, china tft lcd display, etc. For more information, please feel free to contact us!
PRODUCT DESCRIPTION High Durable Excavator Thumb Bucket Hydraulic Grab Bucket Hydraulic Thumb Bucket Description Also Known as Thumb Bucket, Clamp Bucket, It Mainly Applies for Recycling / Civil Applications. Clamp Bucket Specification Weight kg 180 360 520 840 1430 1860 Max Opening mm 818 1150 1380 1550 2220 2235 Oil Pressure kg/m^2 100-130 110-140 120-160 150-170 160-180 160-180 Operating Oil L/min 25-40 30-55 50-100 90-110 100-140 130-170 Cylinder Volume ton 4 5.4 5.4 8.2 10 12 Suitable Excavator ton 2~3 4~6 7~11 12~16 17~23 24~30 * The Parameter above may change with the technology improvement, will not notice additionally, please understand. * For other diameters and lengths, we can customize service, OEM/ODM Thumb Bucket Features 1. Rotary Type High Durable Q345B Steel Excavator Buckets Toosan Digger Hydraulic Thumb 0 2. Fixed Type: High Durable Q345B Steel Excavator Buckets Toosan Digger Hydraulic Thumb 1 Clamp Bucket Real Work shot High Durable Q345B Steel Excavator Buckets Toosan Digger Hydraulic Thumb 2 Excavator Integrated Thumb Bucket Can be used for disposable waste, shrubs, logs, construction waste, stones, pipes, landscaping materials, and demolition sites.Hydraulic excavator grab disassembly and recovery/civil applications. The thumb bucket has advantages in grasping small pieces of wood, sticks, and strips. Suitable for municipal construction, secondary demolition, mining, and most of the operating environment. Easily handle all types of loose, irregularly shaped objects encountered in demolition, industrial, construction, recycling, storm debris removal, landscaping, and other tough job applications.
Rail Profile Gauge Rail Profile Gauge is is mainly used to measure the vertical wear and lateral wear of the railThe reasonable design makes it lightconvenient operation and intuitive reading Features 1 Digital type with direct readings LCD display screen clear and readable No calculations requiredgives direct reading When reading hold down the HOLD button to fix the measurement value and facilitate reading 2 High measuring accuracy The measurement accuracy is 001m 3 Easy to use measure the vertical and lateral rail wear at the same time Position the rail wear gauge on the outer side of the rail Push the vertical and lateral rail wear gauge so that the measuring probe is in contact with the upper surface and inner side of the rail respectivelyThen the vertical and lateral wear of the rail can be read 4 Metric imperial unit 5 Support customize We could customize all kinds wear gauge according to different rail profiles and different measure points 6Fast calibrate Onekey zero clearing function can be quickly calibrated before each use to reach the factory measurement accuracy 7 Magnetic fixed part Strong magnetic fixed part to attach to the rail 8 Rail fillet as measuring base to ensure measure data more accuracy Rail fillet is more clear than rail bottomno dust It could ensure the measure result reliability 9 Portable Handle This product is designed with a handle that is easy to hold which greatly improves the portability of the product It can avoid touching the ruler body directly cause the ruler body to be stained and corroded improve the product service life Model LJGMA Center vertical wear measure range 015mm Lateral wear measure range 025mm Score value 01mm Indication error 0 15mm Supply Customize UIC6060E1 UIC54 54E1 115RE 68TR ect all profiles Block customize block for gauge
RB 1530 portable CNC plasma flame cutting machine has two working modes: plasma cutting, and (flame) gas cutting. Usually plasma cutting machines are used for thickness less than 30mm metal cutting. The gas (flame) cutting machines are used for thickness 30-200mm iron/ steel cutting. Portable CNC plasma flame cutting machine features 1. Two cutting modes optional: plasma cutting and gas (flame) cutting. 2. This CNC plasma cutting machine moves by high precision gear and rack ,accurate running in high speed. 3. The operation is simple, fast, easy to learn the programming software. 4. Small cutting loss and typesetting software high material utilization. 5. Read U disk files through USB directly, convenient site operation. 6. The machine also has feature that automatic arc voltage torch height control, it can adjust cutting distance automatically. 7. It is easy to move, suitable for the site indoor or outdoor 8. Can automatically memorize and restore when power is off. Portable CNC plasma flame cutting machine parameters: Model RB-1530 Working Voltage AC 220V/380V, 50HZ Cutting Size 1500mm*3000mm Plasma Cutting Thickness 0-30mm,According to different power source Gas(flame) cutting Thickness 1-200mm Weight 230KGS Control System STARFIRE(FANGLING optional) Driving System LEADSHINE stepper motor Transmission Method Gear transmission Power Supplier HUAYUAN power or US HYPERTHERM Guide Rail Round rails Nesting Software FASTCAM
Model features: This series of models is an open aluminum alloy profile structure heat shrink baking machine, suitable for electronic wire harness and new energy wire harness heat shrink tubes, circuit boards, inductor wire diagrams, copper bars, hardware accessories and other products (heat shrink baking size range small, but the product size is relatively long), or products that can only be heat-shrunk and baked at one end. 1. The machine uses far-infrared heating tubes for heating (the new energy wiring harness uses thermal radiation heat shrinkable tubes). There are heating tubes installed on the top, bottom, left and right, which can be heated at the same time. It is also equipped with a high-speed centrifugal fan, which can Stir the heat evenly to keep the entire box at a constant temperature; the products that need to be heat-shrunk and baked can be heated at the same time, maintaining the original characteristics of the product, so that the product does not deform or discolor after heat-shrinking or baking, and the quality Stablize: 2. Use high-temperature resistant Teflon mesh belt (temperature resistant 0-350), feeding in assembly line mode, fast baking speed and high efficiency: 3. Aluminum alloy profile structure mode, the mechanical size and structure can be customized and modified at will, and the machine model has a compact structure and exquisite design, and can also be moved and connected to the production line and controlled synchronously; 4. Intelligent control system, the heating temperature and speed can be adjusted at will, which can adapt to the temperature and heat shrinking time needs of different products; 5. Independent control electric box, away from high temperatures; the double-layer design of the heating box is sandwiched with high-temperature insulation cotton (temperature resistance 1200�°C), so that the surface temperature of the box will not be overheated, which not only makes the working environment comfortable, but also reduces Energy waste.
Product Description Specifications Quarter Package: PU with Revel IX Technology Elite-level stiffness and responsiveness for higher-end hockey IX Tech provides a more anatomical, performance-focused fit with the new injection construction process Flexible tendon guard, forward boot rake (or lean) and toe spring all help promote the ideal roller hockey stride Heat moldable for a custom fit and reduced break-in time Comfort Edge collar padding to alleviate ankle irritation Liner: Brushed Tricot for comfort, moisture-management and durability Tongue Construction: Two-piece, Vented Pro Felt Thick design protects the top of the foot from impacts and lace-bite Ventilated center to promote consistent airflow Outsole: Stiff TPR Plastic with Composite Overlay Delivers a perfect balance of lateral support and forgiveness Frame: One-Piece, Alkali Rize Aluminum Chassis Larger rear wheels with smaller front wheels increase agility without compromising top-end speed Fully extruded with 6000-series aluminum for optimal strength and less weight Sizes 1.0-3.0 /(2) 59mm in the front and (2) 68mm in the rear Sizes 4.0-5.0 /(2) 68mm in the front and (2) 72mm in the rear Sizes 6.0-13.0 /(2) 76mm in the front and (2) 80mm in the rear Alkali Square Flush Two-Piece 6mm Axles Wheels: Konixx Tachyon (+0) Indoor Wheels U-base 3 Formula withTrac-tech, Infini-tech andVeloci-tech additives Specially designed hub and dinner core for optimum performance Revel Xena 74A Indoor Wheels Bearings: Helo Swiss 608 Bearings Skate Width:D Weight: 1,346 grams (Size 9)
Features: 1) Beautiful The remote control robot chassis is beautiful in appearance. The fuselage is large, and the space reserved for development is sufficient. 2) Strong The bottom of the fuselage is reinforced to carry heavy loads. The installation position of the travel motor has also been reinforced to prevent deformation and displacement. The tires are lawn tires with a width of 15cm, which are beautiful, durable, large in width and strong in support. 3) Mature technology This product is modified on the basis of our very mature remote control lawn mower, an economical chassis product. It adopts the mature walking motor controller on our remote control lawn mower, which has the characteristics of sensitive response and fast response speed. The built-in smart chip can intelligently detect the current and heating conditions, which can ensure stable use all year round. And it has a slow start function, the operation is smooth, and there will be no frustration when accelerating or decelerating suddenly. 4) Scalability Equipped with a function expansion HUB, which can control additional 4 channels, it can easily control and expand other functions required by customers without professional remote control knowledge. On the basis of our chassis, you can freely add other functional modules to create a new vehicle that meets your own needs. Specification: Walking Speed: 0-6km/h Working Temperature: -20~55�° Remote Control Range: 200m Walking Motor Motor Type: Brush electric traction Voltage / Power: 24V / 350W Reduction Ratioï¼?23.2:1 Rotating Speed: 75RPM Rated/Max Output Torque: 18.4/55Nm Wheel: 15X6.00-6 vacuum tire Battery: 24V 20Ah Remote Control Channel: 7 Extended Controllable Channel: 4 Payload: 50~300kg Wheelbase: 810mm Track: 890mm Overlay Panel: 990*625mm Machine Size: 1070*1035*430mm Machine Weight: 98kg Package Size: 1150*1120*600mm Gross Weight: 130kg
Do you want to spend less time aerating and more time enjoying your lawn? The BlueBird TA10 has a wide width of 36" to let you aerate more land in less time. Two independent tine rotors which have 32 interchangeable closed spoon tines give you an aerating width of 36 which allows you to aerate large areas quickly. Optional weight containers can be purchased to add extra weight for optimal soil penetration. Maneuver around tight areas and corners with ease thanks to the dual tine rotors. Plus the unique side wheel system also adds to the maneuverability by allowing the aerator to move through tight passages and also allows it to be stored on its side. Tow Behind Aerator:No engine to worry about! Just be sure to use a tractor with an engine that is 16HP or larger to tow this aerator. Wide Aerating Width:36 of aerating width allows you to cover large areas in less time Adjustable Aerating Depth:Aerate from 0-3 for precise and consistent coring 40 Interchangeable Closed Spoon Tines:4.4 x 6 tine pattern Unique Side Wheel System:Allows aerator to easily move through tight passages without getting hung up and also allows for the aerator to be safely stored on its side. Optional Weight Containers (Sold Separately):Add up to 5 weight containers to add additional weight to ensure optimal soil penetration.
Product overview 1. This product is mainly made of epoxy copolymerization of several fatty alcohols. 2. The basic properties of the foaming system are not affected due to its strong anti-foaming and anti-foaming effect. 3. Good heat resistance, stable chemical properties, no corrosion, no toxic, no adverse side effects. Technical specifications �· Appearance: Transparent liquid or light yellow liquid �· Viscosity (25�ºC) : 100 ~ 800 mPa.s �· Solids content: 100% Performance characteristics The white water in the wet end of papermaking, and the medium temperature white water system is more effective. Usage tips The antifoaming agent has excellent foam elimination and inhibition performance, and can be added to product after foam generation or as foam inhibition components. The additive amount of defoaming agent can be 10~100ppm. The optimal additive amount is determined by customers through test according to specific condition Defoaming agent product can be used directly or after dilution. If the product can be fully stirred and dispersed in foaming system, and can be directly added without dilution. If it needs to be diluted, it can't be directly diluted with water, otherwise the layering, demulsification, etc. Easily occur, thus influencing the product quality. For consequences generated due to direct dilution with water or process of use of the product in other incorret methods, our company doesn't undertake the responsibilities Packing and storage This product is packed in 25kg, 50kg or 200kg plastic drums. If you have special requirements, you can negotiate and customize. This product is suitable for storage at 0~30, and do not place it near a heat source or expose it to sunlight. Do not add acid, alkali, salt and other substances to this product. Seal the container when not in use. If there is stratification after long-term storage, stir it evenly. Generally, the effect will not be affected. According to general chemical storage methods. Ensure that it is sealed after use. Under the recommended storage temperature and unopened packaging conditions, the shelf life is 12 months from the date of production.
R290 or propane gas currently stands out for its wide range of applications in both the commercial and industrial fields. This gas has practically unbeatable properties in any of its applications, due to its GWP (Global Warming Potential) = 3 and an ODP (Ozone Depletion Potential) = 0. However, on the other hand, being a class A3 refrigerant, it is a non-toxic, but extremely flammable refrigerant. R290 has similar thermodynamic properties to R22, although certain characteristics such as capacity and working pressures are lower. Even so, it has excellent therm-physical properties and its thermal efficiency is good for most conditions, including high ambient temperatures, where the discharge temperature is low. Advantages â?¢ Natural, environmentally friendly and efficient refrigerant. R290 or propane gas is a natural refrigerant and has a low cost due to its abundance. In addition, it has high energy efficiency, thanks to its thermodynamic properties and high performance, which will lead to cost reduction. Climate adaptability. R290 gas has been shown to be better adapted to hot climates than HFCs. Performance. Their smaller displacement compressors further increase efficiency in industrial equipment, while also delivering high performance in commercial applications. Wide range of application. R290 refrigerant is fully suitable for both commercial and industrial equipment and systems. Good compatibility with other components. Reduced charge of R290 refrigerant. Obtaining a higher efficiency and performance than other refrigerants with only 40% charge. Long-term solution free of fluorinated refrigerants. This natural refrigerant is a safe bet for the long term, as it has no future environmental restrictions and is free of refrigerant taxation. Applications: â?¢ Commercial Refrigeration Systems. â?¢ Industrial Refrigeration Systems. Chiller Systems. Chill Cabinetry. Vending. Cold Storage. AC Systems. Heating Pumps.
1. Equipment usage: This testing ± 1/500000, Relative error of indication: better than ± 1% of the indication, 2 displacement (moving crossbeam, excluding stretching fixture), Measurement range: 0-700mm, Resolution: 0.0025mm, 3 Test speed: Speed adjustment range: 0.01-500mm/min (stepless speed regulation), Accuracy: better than ± 0.5% of the indicated value, Displacement rate control accuracy: within ± 1.0% of the set value when the rate is less than 0.1mm/min; When the speed is 0.1mm/min, within ± 0.2% of the set value, 4 Control: Force control speed regulation range: 0.005-5% F.S/S, Force control rate control accuracy: within �± 2% of the set value when the rate is less than 0.05% FS/S; When the rate is 0.05% FS/S, within the set value of ± 0.5%/ ± 1.0%, Deformation speed regulation range: 0.005% FS/S, Deformation rate control accuracy: within ± 2% of the set value when the rate is less than 0.05% FS/S; When the rate is 0.05% FS/S, it is within ± 0.5% of the set value, Constant force, constant deformation, and constant displacement control range: 0.5% -100% FS/S, Constant force, constant deformation, and constant displacement control accuracy: within ± 0.1% of the set value when the set value is â 10% FS; When the set value is less than 10% FS, within ± 1% of the set value. 5 Effective test space (with fixture): Effective stretching space: 700mm, Effective compressed space: 700mm, 6. Working environment: Room temperature 10~35 , humidity 20%~80%, 7. Power supply for the entire machine: single-phase, 220V ± 10%, 50Hz, 8 Host size: 530 370 1400mm, 9 Weight: 140 kg,