En590 Diesel Crude Oil Suppliers and Manufacturers

Rasha Motor oil 5W 40 API SN full synthetic engine oil is the ultimate in protection and performance. This premium quality engine oil is formulated a complex blend of synthetic base oils and chemical additives designed to protect the engine and enhance its performance under extreme operating conditions such as high temperature motorway driving or low temperature stop and go driving. Rasha Motor oil� 5W 40 API SN full synthetic engine oil is the ultimate in protection and performance. This premium quality engine oil is formulated a complex blend of� synthetic� base oils and chemical additives designed to protect the engine and enhance its performance under extreme operating conditions such as high temperature motorway driving or low temperature stop and go driving. �  This oil is designed for use in high-speed four-stroke cycle diesel engines and Tier 4 non-road exhaust emission standards as well as for previous model year diesel engines.SAE 5 W 40 API SN RASHA Motor Oil Full synthetic engine oil, low friction type that reduces fuel consumption. Recommended for 4-stroke engines, petrol or diesel, which is used in in extreme cold and in warmer climates. This motor oil is especially effective at sustaining emission control system durability where particulate filters and other advanced after treatment systems are used. RASHA Motor oil Heavy-Duty SAE 5W-40 Full Synthetic API SN provide enhanced protection against oil oxidation, viscosity loss due to shear, and oil aeration as well as protection against catalyst poisoning, particulate filter blocking, engine wear, piston deposits, degradation of low- and high-temperature properties, and soot-related viscosity increase.

EN 590 Gas Oil is a 10 ppm (parts per million) sulphur content gas oil. It has a higher cetane number than A2 Class Gas Oil (another 10ppm sulphur content class of red diesel), making it better suited to internal combustion engines in off-road vehicles.

"Diesel D6 virgin oil" is not a standard term in the oil industry. However, based on common industry terminology and understanding, it seems you might be referring to a specific type of diesel fuel. Here's a general description that could apply: Diesel D6 is typically classified under the category of middle distillates, which are refined products derived from crude oil. It is a specific grade of diesel fuel used primarily for automotive engines and industrial applications. The term "virgin oil" is not commonly used in this context; instead, "virgin" could imply that the diesel fuel is of high quality and meets certain specifications without being mixed or blended with lower-grade fuels. Key characteristics of Diesel D6 may include: High Energy Density: Diesel D6 is known for its high energy content per volume, making it efficient for use in diesel engines which are common in transportation (e.g., trucks, buses, trains) and industrial machinery. Low Sulfur Content: Modern regulations often require diesel fuels like D6 to have low sulfur content to reduce emissions and comply with environmental standards. Suitable for Various Climates: It is formulated to perform well in a range of temperatures and conditions, ensuring reliable operation in both cold and warm climates. Industrial and Automotive Use: Besides transportation, Diesel D6 is used in various industrial applications where a reliable and efficient fuel source is needed. For oil exporters, Diesel D6 represents a valuable product that can be sold to domestic and international markets where there is demand for high-quality diesel fuel. Exporting Diesel D6 requires compliance with international standards and specifications to ensure it meets the requirements of customers and regulatory authorities in the receiving countries. Origin: Kazakhstan / Russia.

Product Details: Storage : Dry Place Form : Liquid Grade : Industrial Grade Application : Industrial Supply Ability : 2500000 Kilograms Per Month Price And Quantity Minimum Order Quantity : 50 Kilograms Product Specifications Grade Industrial Grade : Application Industrial : Form Liquid Storage : Dry Place Trade Information Payment Terms : Cash in Advance (CID) Supply Ability : 2500000 Kilograms Per Month Delivery Time : 1 Week Main Domestic : Market All India Product Description We are offering D2 Diesel Oil that is distilled from crude oil. It can be used without reformers and additives. The first invented engines used this fuel before the petrol cars were invented. Nowadays this is used for diesel engine vehicles mostly in trucks, buses, boats, construction engines, agricultural vehicles and so on. Some small cars, boats and small trucks also have diesel engines that use this fuel. D2 Diesel Oil is an industrial grade liquid that is to be stored at a dry place to store for longer period of time.

Product Name : BURNER OIL/LDO Product Description : Density 0.84-0.87 Price of product ( USD price or FOB price) : CFR MUNDRA /NEVA SHEVA USD 470-520 Product origin : GCC/UAE Key Specifications/Special Features : ON REQUEST Minimum Order Size and Packgaing details : Flexi Containers

Product Name : Furnace Oil Product Description : DENSITY 0.90-0.95 Price of product ( USD price or FOB price) : CFR MUNDRA/NEVASHEVA USD 320-330 Product origin : GCC/UAE Key Specifications/Special Features : ON REQUEST Minimum Order Size and Packgaing details Flexi Containers

We deals in petroleum and petrochemical products currently available for supply from Kazakhstan, Europe & Qatar. We handle worldwide supplies from our direct selling Refinery to AWSP on CIF/FOB. The listed products are available on CIF/FOB and we follow standards procedure selling Refinery: JP54, JETFUEL A1, VIRGIN OIL D6, D2, MAZUT, LNG, EN590-10PPM, BASE OIL, PET COKE, LNG & LPG etc Payment Terms: 100% SBLC/LC/DLC Origin: Kazakhstan, Europe, Qatar Contact us for more details. Thanks AWF Global Trading Company Limited.

We supply Light Cycle OIl (LCO) Origin: Kazakhstan First Lift: 50,000 Metric Tonnes Contract: up to 100,000 MT/month x 12 months CIF Price: USD $270/MT LCO, a by-product of the fluid catalytic cracking (FCC) process in a petroleum refinery, can be used as a blendstock for the production of diesel and jet fuels. Light Cycle Oil (LCO) is the diesel boiling range material, which is produced in addition to gas and petrol in the Fluid Catalytic Cracking Unit (FCCU). The optimised partial conversion hydrocracking process provides an effective and flexible process to process LCO into desired products such as very-low sulphur diesel and high-octane high-aromatics naphtha.

BASE OIL SN 100-150-300-500-600-700 Base oil is a type of oil which is used as a base for lubricants. The main element of lubricants (volume wise) is base oil and it forms about 95% of lubricants weight. In some lubricants (Compressor and hydraulic oil) 99% of the oil is consisted of base oil and only the 1% which is left contains additives. Base oils can be reached from oil based and non-oil based resources. Most of the base oils used in the world are obtained from crude oil refining. Most of the compounds which form base oils are Paraphinic, Naphthenic and aromatic compounds. Base oils chemical properties and their impact on the usage of final lubricant: 1 volatility: reduction of the oil, oil thickening, sediments 2 surface activity: foaming, pressure tolerance, air release, emulsion expansion 3 oxidations: sediments, oil thickening, metal oxidation, mud forming 4 Viscosity: Fluidity in lower degrees, energy waste, abrasion protection, proper cooling 5 being soluble: Motor neatness, sealant compatibility, process applications, formulation sustainability The base oil which is extracted from crude oil is called mineral base oil which is categorized in two types (Paraphinic and Naphtshic). Paraphinic oils are consisted of normal hydrocarbons and Iso hydrocarbons. Naphthic oils are consisted of annular full hydrocarbons. Paraphinic oils have certain attributes in comparison with naphthic oils such as;

Wholesale Light cycle oil Light Cycle Oil (LCO) is a secondary liquid product derived from the fluid catalytic cracking (FCC) process in refineries. This process breaks down larger hydrocarbon molecules from heavy gas oils into smaller, more valuable products like gasoline and diesel. LCO typically sits between diesel and heavy gas oil in terms of boiling range and weight. Primary Characteristics: Appearance: Typically amber to dark brown liquid. Odor: Characteristic petroleum smell. Density: Intermediate, falling between lighter distillates and heavier oils. Sulfur Content: Can vary based on the feedstock and refining process, but often higher than diesel and gasoline. Applications: Blending Component: Frequently blended into diesel fuel to enhance volume, though this requires treating to meet emissions standards.

Light Cycle Oil, also known as LCO, is a refined product derived from the processing of crude oil. It has a higher density and boiling point range compared to diesel fuel but lower than heavy fuel oil. LCO is commonly used as a feedstock for fluid catalytic cracking units (FCCU) and is also used as a blend component for marine fuels.

Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS

Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS

D6 is also be known as Residual Fuel Oil and is of high-viscosity. This particular fuel oil requires preheating to 220 - 260 Degrees Fahrenheit. D6 is mostly used for generators. D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world it has other names. Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2 percent water and one-half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400 Recent changes in fuel quality regulation now require further refining of the D6 in order to remove the sulfur, which leads to a higher cost. Despite this recent change, D6 is still less useful because of its viscosity as well as that it needs to be pre-heated before it can be used and contains high amounts of pollutants, such as sulfur. Since it requires pre-heating, it cannot be used in small ships or boats or cars. However large ships and power plants can use the residual fuel oil. The price of D6 diesel traditionally rises during colder months as demand for heating oil rises, which is refined in much the same way.In many parts of the United States and throughout the United Kingdom and Australia, d6 diesel may be priced higher than petrol. D6 Diesel Standards and ClassificationCCAI and CII are two indexes which describe the ignition quality of residual fuel oil, and CCAI is especially often calculated for marine fuels.

product Description : These Products are Exported with Stringent Adherence to Standard Russian Export Specifications with Respective GOST. Price of product ( USD price or FOB price) : Product will be priced in USD$ Based on an Appropriate PLATTS INDEX or a FIXED Price and the Agreed Upon Shipping Method. The Price will be Mutually Agreed to by Buyer and Seller Product origin : Russian Federation Key Specifications/Delivery/Logistics : 1. Certification SGC or Equivalent 2. Payment Terms = Letter of Credit ( Details to be agreed upon by Buyer and Seller 3. Delivery Time = Varies by Destination 4. Port of Loading = TBD Minimum Order Size & Contract Term : Minimum Monthly Quantity = 100,000 MT X 12 Month Contract Required with R & E up to 120 Months

Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS