Construction aggregate, or simply "aggregate", is a broad category of coarse to medium grained particulate material used in construction, including sand, gravel, crushed stone, slag, recycled concrete and geosynthetic aggregates. Aggregates are the most mined materials in the world. Aggregates are a component of composite materials such as concrete and asphalt concrete; the aggregate serves as reinforcement to add strength to the overall composite material. Due to the relatively high hydraulic conductivity value as compared to most soils, aggregates are widely used in drainage applications such as foundation and French drains, septic drain fields, retaining wall drains, and roadside edge drains. Aggregates are also used as base material under foundations, roads, and railroads. In other words, aggregates are used as a stable foundation or road/rail base with predictable, uniform properties (e.g. to help prevent differential settling under the road or building), or as a low-cost extender that binds with more expensive cement or asphalt to form concrete.
Tire-derived aggregate (TDA) is made of shredded end-of-life tires and used as a sustainable and lightweight alternative to natural aggregate. We have the capacity to provide a monthly supply of 200 tons.
Coarse Aggregates Size 10 MM For Bothe Concrete and Asphalt/Road Projects.
Supply Aggregate Stone chips of different specifications ( 1/2", 1/4", 3/4", 5/8", 4/5", 5/10" etc) for project works. Only Indian PAKUR (Black) Brand in the "UPPER, MIDDLE, DOWN" grade only.
Crusher Aggregates Of Any Sizes
- 1x2 (10x20mm) stone is kind of building material which is used for construction projects (concrete) such as highways, roads, airports, buildings, or houses,...
Coarse Aggregate Size 20MM for Both Concrete and Asphalt/Road Projects.
River sand, marine sand, dumping sand, silica sand, bauxite sand, ball clay, kaolin clay, aggregates stone.Sourcing products, packaging, shipping
3/4 Stone chips aggregates, often referred to as 3/4-inch aggregates, are a type of construction aggregate characterized by their approximate size of three-fourths of an inch (20 mm aggregates) in diameter. These aggregates are commonly used in construction and various civil engineering applications. Here are some key details about 3/4 Stone chips aggregates: 1. Size: As the name suggests, 3/4 Stone chips aggregates have a particle size of roughly 3/4 of an inch in diameter. They are sometimes also referred to as 20 mm aggregates in metric units. 2. Composition: 3/4 Stone chips aggregates are typically made from crushed stone or naturally occurring stone materials, such as granite, limestone, trap rock, or gravel. The specific type of stone used can vary based on regional availability and project requirements. 3. Uses: These aggregates have a wide range of applications, including: Construction:3/4 Stone chips aggregates aggregates are commonly used as a key component in concrete mixes, asphalt mixes, and road construction. They provide stability and strength to these materials. Drainage: Their size and angular shape make them suitable for use in drainage systems, French drains, and other applications where effective drainage is needed. Landscaping: 3/4 Stone chips aggregates can be used in landscaping projects for pathways, decorative features, and as a base for retaining walls or pavers. Subbase: They are also used as a subbase material for foundations and roads, providing a stable foundation for construction. 4. Durability: 3/4 Stone chips aggregates are known for their durability and ability to withstand heavy loads and wear over time. They contribute to the overall strength and longevity of construction projects. 5. Installation: Proper installation techniques, such as spreading and compacting the aggregates to achieve the desired thickness and density, are essential to ensure their effectiveness in construction and drainage applications. 6. Cost: The cost of 3/4 Stone chips aggregates can vary depending on factors like location, the specific type of stone used, and local market conditions and the availability of aggregates supplier. They are generally cost-effective compared to other construction materials. In summary, 3/4 stone chips aggregates are a versatile and widely used construction material valued for their size consistency, durability, and suitability for various applications, 3/4 stone chips aggregates supplier are playing key factor to boot this business in Bangladesh.
Used to absorbs moisture. From 1-1500gms.
Grade : Ceramic Bodies & Prepared Bodies
we are a company that produces clay in the form of flour and granules.
Refractory bricks, high alumina bricks, acid proof bricks, tiles and castables, all mortars and fire clay, low cement castables, insulating castables, conventional dense refractory bricks, insulation bricks, cold face, hot face insulation bricks, hot face insulation bricks, acid resistant bricks/components, membranes, acid resistant cement, construction chemicals, class 1 ar tiles and bricks 38mm and 75mm, 4457 vitrified ar tiles with 0% water absorption, 20mm & 25m, primer, mastics, pot. silicate cement, coerce cement, furnace based cement, crushed refractory boiler bed material, acid resistant tiles, acid resistant brick fireclay type, acid resistant brick red shale type, bitumen primer, epoxy resin & hardner, furan powder and syrup solution,.
River sand, silica sand, aggregate, raw bauxite, calcined bauxite, china clay, limestone..Ship, cargo
Ocean bottom glacier blue clay
We Supplier and Exporter Clay SiO2 (Silicon Dioxide) : 50 % AI2O3 (Alumunium Oxide) : 18 % Moisture : 3 % Mesh : 80 - 100 %
Boiler bed materials are made out of quality refractory aggregates of high alumina contents & of highly dense texture. Boiler bed material is ideal for obtaining perfect fluidization in boilers of Circulating fluidized bed combustion (CFBC) & fluidized bed combustion (FBC) boilers. Boiler bed material of low ferric high temperature product is passed through high power magnetic separation process to eliminate free iron particles. It is an appropriate product to sustain technical properties for fluidizing at high temperature up to 1400 C under most critical working situation. We offer finest refractory crushed boiler bed material of higher quality.
Ball clay is a silicate clay rock of which kaolinite is the main constituent: Al2Si2O5(OH)4. Ball clays are kaolinitic clays in the family of silicate minerals. It commonly consists of kaolinite, mica, quartz silica, as well as few organic matters. Ball clay is formed from the weathering and transportation by water of parent rocks. Seams in the same deposit may vary in composition, depending on the quantity of the principal and accessory minerals. Ball clays are fine-grained, highly plastic clays, which are principally used in the manufacture of ceramic whiteware and sanitaryware where they are appreciated for their plasticity, unfired strength and their light colour on firing. Selected clays can even give pure white end products. Among others, ball clays are also used in refractories, in polymers, in adhesives and sealants and in horticulture as soil amendments. Ball clay is particularly valued as a base material in the manufacture of ceramics. Combined with kaolin, ball clays provide the cohesion and workability necessary for the creation of ceramic parts such as sanitaryware. While using it with kaolin, feldspar and quartz in tableware, ball clay confers high plasticity and a good white-fired colour to the end product. In wall and floor tiles, ball clays are prized for their plasticity and bonding properties. In glazes and engobes, they ensure a perfect finish. Electrical porcelain insulators Ball contain plastic clays to provide insulation from high voltage currents. BALL CLAY produced by Peekay Minerals are having the following charactsitics High plasticity High unfired mechanical strength Highly controlled rheological properties Controlled organic content Controlled residue Excellent workability End Users usually ask the following test results L Value firing test of whiteness Dry MOR Fired MOR at 1180 deg cent Water of Plasticity Shrinkage Sieve Analysis
I have 160 acres of clay available for mining .located in perak malaysia.please contact me if you are interested.my target is supplier of clay or company that use clay as the ingredients such as brick company, roof company of even cosmetics company .feel free to contact me
Building & construction materials, minerals and chemicals, fly ash (astm c618 class f / bs en 450 / bs 3892), ggbfs / gbs, aggregates (crushed stones, stone chips), bentonite (drilling, pilling, foundry, construction), kaolin/china clay, salt/sodium chloride (industrial grade, food grade).Exports
