Valves and sanitary taps, brass stainless fittings..... 142,000 PEX fittings/14,100 pcs weld seamless fittings /372,300 malleable iron galvanised fittings/ 27,000 galvanized pipe nipple /8,000 flanges /19,600 black steel sockets/ 29,900 pipe nipples/ 75,000 sanitary valves/ 152,000 brass and stainless steel fittings/ 6,800 flanges/ 7,000 flexibles /PPR pipes 8,500 pc etc ,,,,, total Weight 200 tons /volume 8 CT/ Location of stock Italy
Valves and sanitary taps, brass stainless fittings..... 142,000 PEX fittings/14,100 pcs weld seamless fittings /372,300 malleable iron galvanised fittings/ 27,000 galvanized pipe nipple /8,000 flanges /19,600 black steel sockets/ 29,900 pipe nipples/ 75,000 sanitary valves/ 152,000 brass and stainless steel fittings/ 6,800 flanges/ 7,000 flexibles /PPR pipes 8,500 pc etc ,,,,, total Weight 200 tons /volume 8/9 CT/ sold only for take all, price on demand Location of stock Italy
Customizable fittings for bathroom and Kitchen. Faucets, wash bashins etc
Sprinkler irrigation is the irrigation system in which water required by the plant is sprayed like rain under the defined pressure. Water is transferred to sprinklers. Individual sprinkler system consists of the water source, pump, main pipeline, vertical pipeline, and sprinklers. Sanbor Sprinkler Irrigation Pipes which are produced according to TS EN 12201-2 quality standard is made of high-density polyethylene (HDPE) and produced with 50-160 mm diameters and 5-6 meter length. Operating pressure is 6 atmospheres. The montage of SANBOR Sprinkler Irrigation Pipes is easy. They can be combined when the plastic seals and the clips at two sides are combined. Advantages Since there is no water loss in the system, water is used in the maximum level in the places where irrigation water is low (3.5 lt/sec). It can provide irrigation without erosion in slopped lands. Since the water is given to the soil with the rain effect, 20%-50% increase is observed in corp yield compared to other irrigation methods and quality is high. -During seed germination, the inability of the plant to reach above ground due to the layer created on the soil is prevented. Ideal irrigation system in the soils with low depth and (shallow) permeable soils. At the places closer to the sea, salt particles left by the sea water carried by wind, dust and insects can be washed via rain. Since there is the opportunity to control water via sprinkler irrigation, it is the best irrigation method at the places whose groundwater level (drainage) is high. Since there is no need for field ditches, planting area increases and agricultural works can easily be operated. Vegetables, citrus, vineyards and other orchards can be protected from frost and heat. Dissoluble fertilizers can be applied to vegetables with the irrigation water without extra work Areas of Usage It is used in the irrigation of slopped lands, wine yards, and gardens, vegetable, citrus and other orchards. Things to take into account While carrying, it should not be lifted and thrown. Clamps and clips can be broken. It can stay under solar rays and be used in the fields during summer. No problem is observed. Pipes should be stored at the possible temperatures between +5°C and +45°C. Before using the seals for pipe connection, seal recesses should be cleaned. The seal should be completely placed. High pressure created in motor pump outlets cause the removal of seals in the pipes. Pressure should be kept under control with a manometer. The promised pressure values on our pipes are under our warranty. In case of higher pressure levels than the indicated ones, the possible problems that can be created are not covered by the warranty
Size: 20 - 110 mm Color: White, Grey, Green etc.
SCRAP METAL CLEARANCE COMPANY LIMITED is a leading manufacturer of ferrous and non-ferrous scrap metals in Hartley, Plymouth, United Kingdom with our head quarter in United States of America and we are the leading supplier of metal scraps and recycling in the Scrap market and we have the best quality of Grade 1 Old Steel (#1 5 ft) contact us for more infor if need be thanks for your patronage
SCRAP METAL CLEARANCE COMPANY LIMITED is a leading manufacturer of ferrous and non-ferrous scrap metals in Hartley, Plymouth, United Kingdom with our head quarter in United States of America and we are the leading supplier of metal scraps and recycling in the Scrap market and we have the best quality of Grade 2 Old Steel (#2 2ft) contact us for more infor if need be thanks for your patronage
For the discharge of water, waste water and light chemicals in agriculture and construction For Home, Park, Garden and Field Irrigaon, Construcon and Industry, Discharge of Light Chem icals For all kinds of Irrigation
Polyethylene pressure pipes PE-100 for sewerage systems. Polyethylene pressure pipes for sewerage are used for construction and repair of outdoor pipelines, transporting water of household and drinking supply.Leading raw suppliers are European manufacturers SABIK, TOTAL. Pipes are made of polyethylene PE 100 class and correspond to standard dimension ratio SDR 41 - SDR 6, with nominal diameters from25to500 mm, including main working pressures 4; 6; 8; 10; 12,5; 16; 20 bar. Pipes, produced in linear segments, have the length 12 m (or another by agreement with the customer). Pipes with diameter not more than 160 mm can be produced in hanks (cylinders) from 50 to 1000 m. Pipes with diameter up to 110 can be connected by means of mechanic (compression) fittings. Polyethylene pipes of major diameters are connected mainly by means of jam-weld or by means of thermistor fittings that requires special welding equipement. Such connection is monolithic and considered to be the most reliable. -------- Polypropylene casing pipes with connecting threads for the construction of water supply wells and also production wells. The sinking of wells using casing pipes allows to avoid groundwater pollution, and also increase the speed of sinking thanks to reduced diameter in comparison with usual steel pipes. Blue casing pipesfor wells have the following diameters: Pipes are made of copolymere propylenes, which have better mechanical and ecological chracteristics than PVC pipes for wells. ------- Two-layered fluted polymeric pipes for outdoor sewerage (POLYCORR). Polymeric pipes corresponds to the requirements of European standard project EN1401-1; 1999,material for pipes production-block-copolymer polypropylene PP of leading European manufacturers BASELL,?V?.Nominal bore D 200, 300, 400, 500, 600, 800,? type of tube, circular rigidity SN4, SN8,SN16. Pipes produced by means of continuos extrusion method, have double closed structure of wall. The smooth inner surface and the corrugated outer wall. Pipes are connected by means of flayers, produced on the pipes during production process. The color of standard pipes and molded pieces for sewerage -ginger, the color of inner walls of pipes - white. PP pipes are designed for nonramming underground systems of public sanitary and storm water drainage.
Material: plastic Suitable for all kind of irrigation pipes Size : 16, 20
Pipe fittings, valves, flanges for oil and gas fields, petrochemical industry.
Best Quality & Heavy Duty Nuclear Pipes Made in Romania Made of INOX 400,000 Linear Metre (ML) availble. More can be produced on request
We offers for sale a special stock of hydraulic hose 3/8'' DN10 2SN and 2SC LIMITED STOCK SPECIAL PRICE high quality Cidat Italy hose, the hose is covered with special blue and yellow anti-UV and anti-abrasion rubber, it is a special hydraulic hose that withstands more bar, i.e. 400 bar nominal and breaking at 1200 bar, robust and quality STOCK limited to only 3.32 net + VAT per meter unique PRICE on the market order minimum 100 meters of mixed rolls price is negotiable
HIGH-QUALITY TURBO HOSE FOR MITSUBISHI
POLAR RED SE industrial water hose Applications: Plasticized red hose from special PVC and NBR rubber compound for suction and delivery of waste water, mud, sewage. Excellent for general applications at low temperatures. Tube: PVC/NBR, red, smooth. Reinforcement: PVC helix (anti-shock). Cover: PVC/NBR red, light corrugated, resistant to atmospheric factors. Temperature: - Industrial water hose POLAR SUPERFLEX Applications: Strong and flexible hose is suitable for suction and delivery of water, salt water, light chemicals, liquids and etc. in agriculture, industry, constructions, sewer purging, sludge, slurries, waste matter, etc. Tube: PVC (mixture), smooth, resistant to low temperature. Reinforcement: PVC helix (anti-shock). Cover: PVC (mixture), light corrugated, resistant to abrasion, low temperature and atmospheric factors. Temperature:
Suction and delivery hose for oil derived products Applications: Suction and delivery hose designed for filling and discharging tanks, petrol tankers and ships. Suitable for products up to 50% of aromatic contents. Tube: Synthetic rubber, black, smooth, oil resistant. Reinforcement: Synthetic cord, steel wire, antistatic wire. Cover: Synthetic rubber, black, cloth impression, oil and abrasion resistant. Temperature:
Hydraulic ram flanges.
Stainless steel flange and fittings.
Wheat flour, buckwhear husk wood reels drum flanges, wood timber.
China overhead line fittings, crafted from iron or aluminum, secure and support conductors in power lines. Various hardware types include clamps for wire installation, hanging rings for insulator strings, crimping and repair tubes for wire connections, and spacer bars for split wires. In addition, cable fittings for pole towers are utilized. These components not only fix and support wires but also assemble suspension insulators into strings, connecting and hanging them on tower cross arms. Design and manufacturing considerations prioritize strength, stiffness, and wear resistance for long-term use. Selection and configuration of hardware must align with specific line conditions to ensure the safe and stable operation of overhead lines. Installation Guide for Overhead Power Line Accessories There are 5 steps for the installation of electrical overhead line fittings: Preparation and Planning: Conduct a comprehensive site assessment considering terrain, weather, and load requirements. Assembly and Inspection: Assemble fittings according to manufacturer guidelines, ensuring all bolts and connections are securely tightened. Lifting and Attachment: Lift and position assembled fittings onto poles or towers, using appropriate lifting equipment. Alignment and Tensioning: Verify alignment and adjust if necessary. Final Checks and Documentation: Conduct thorough quality checks, addressing any issues identified during the inspection. The components of an overhead line, a crucial element in power transmission and distribution, consist of a well-coordinated system of essential elements designed to efficiently transport electrical energy from generation sources to end-users. At its core, an overhead line typically comprises conductors, supporting structures, insulators, and associated hardware. Conductors form the backbone of the overhead line, serving as the pathway for electricity to flow. These conductors are often made of aluminum or copper, chosen for their excellent conductivity and durability. Supporting structures, such as poles or towers, play a critical role in elevating the conductors above the ground and maintaining the required clearance. The design and placement of these structures are essential to ensure the stability and reliability of the overhead line. Insulators, often made of ceramic or composite materials, are strategically placed to electrically isolate the conductors from the supporting structures, preventing unintended paths for current flow. This is crucial for maintaining the integrity and safety of the system. Additionally, associated hardware such as clamps, connectors, and fittings are employed to secure and connect various components of the overhead line, ensuring a robust and reliable transmission network.