Sfct, split pressurized system for residential A solar water heating system includes three parts, it is collector, water tank and pump station. This system can do more than just producing hot water, in winter, it can also be used in a space heating system. Homeowners in ny, nj, mi and all northern states like this system so much, in fact, this is the most popular and reliable system for all families, and it also works great in ca, az fl... Thanks to the intelligent controller and circulation pump, which help the system runs automatically, it is so easy to use, you will find it's a good assistant. Model number collector model collector absorber area tank capacity(l/gal) Sfct-01-150-15 scm15-58/1800 1 pc 1.92 m2(20.67 ft2) 150/40 Sfct-01-150-20 scm20-58/1800 1 pc 2.57 m2(27.66 ft2) 150/40 Sfct-01-200-20 scm20-58/1800 1 pc 2.57 m2(27.66 ft2) 200/50 Sfct-01-300-30 scm15-58/1800 2 pc 3.84 m2(41.33 ft2) 300/80 Sfct-01-300-40 scm20-58/1800 2 pc 5.14 m2(55.33 ft2) 300/80 Sfct-01-500-60 scm20-58/1800 3 pc 7.71 m2(82.99 ft2) 500/130 17- 33 sets in 20' gp
Sfct, split pressurized system for residential A solar water heating system includes three parts, it is collector, water tank and pump station. This system can do more than just producing hot water, in winter, it can also be used in a space heating system. Homeowners in ny, nj, mi and all northern states like this system so much, in fact, this is the most popular and reliable system for all families, and it also works great in ca, az fl... Thanks to the intelligent controller and circulation pump, which help the system runs automatically, it is so easy to use, you will find it's a good assistant. Model number collector model collector absorber area tank capacity(l/gal) Sfct-01-150-15 scm15-58/1800 1 pc 1.92 m2(20.67 ft2) 150/40 Sfct-01-150-20 scm20-58/1800 1 pc 2.57 m2(27.66 ft2) 150/40 Sfct-01-200-20 scm20-58/1800 1 pc 2.57 m2(27.66 ft2) 200/50 Sfct-01-300-30 scm15-58/1800 2 pc 3.84 m2(41.33 ft2) 300/80 Sfct-01-300-40 scm20-58/1800 2 pc 5.14 m2(55.33 ft2) 300/80 Sfct-01-500-60 scm20-58/1800 3 pc 7.71 m2(82.99 ft2) 500/130 17- 33 sets in 20' gp
Products model: sc-s01p»G+dåseparate pressurized solar water heaterp»G+GǦ Products intro The separate pressurized solar water heater compose of solar collector, storage tank, controller, working station and installation parts. Working principle: 1) when the discrepant temperature of the solar collector and water tank reaches the set value, the controller shall start the circulation pump automatically 2) the circulation pump makes heat-conducting liquid circulate automatically 3) the heat-conducting liquid transfers heat to water by heat exchanger in the water tank 4) in case the temperature of the water tank does not reach tmax, then start the auxiliary heating device 5) if discrepant temperature of the collector and the water tank does not reach the set value, the circulation pump shall be shut automatically Feature: 1) collector separates with the storage tank. The tank can be put anywhere of the house 2) and the collector can be put on both tilted roof and flat roof 3) module design, arbitrary combination, harmony with the building perfectly 4) intelligent control and automatic operation 5) anti-freeze: no water inside the tubes when it works 6) the system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature 7) multifunction: bathing, washing, domestic heating 8) workable at anytime and enjoyableouter Features of separate pressurized system: * strong hydraulic pressure makes your bathe more comfortable * modularized collector, arbitrary combination * intelligent controlling and multiple functions * arbitrary combination with structure of your beautiful constructions * separate installation conveniently * working with assistant resource * full set of original equipment, the life time will be much longer to ensure better using * material A) inner water tank: imported sus304 stainless steel B) outer water tank: galvanized steel alloy C) bracket: aluminium alloy
Products model sc-ip01(integrative pressurized solar water heater) Products intro Material: A) inner water tank: sus304 B) outer water tank: galvanized steel alloy C) bracket: galvanized steel or aluminum alloy Solar vacuum tube with heat pipe: A) size: 58 x 1, 900mm B) qty: 20 / 24/ 30pcs Temperature insulation layer: 50mm thickness imported polyurethane, machinery overall for keeping same temperature And high pressure foam Capacity: 200 / 240/ 300 liters Max. Pressure bearing: 1.2mpa 3 years' international responsibility for free repairing or exchange due to original quality problems
Products intro: Detailed selling lead description A copper coiler with 32 meters length is installed in water storage tank as the heat exchanger. When water flows into the copper coiler, it absorbs the heat from the water in the tank, so it can bear much higher pressure, there will be a strong and more comfortable shower. And, without the tank directly transferring, the water is more clean and healthy. 1) material: A) inner water tank: imported sus304 stainless steel B) outer water tank: galvanized steel alloy or stainless steel C) bracket: galvanized steel or aluminum alloy 2) solar vacuum tube: A) size: 58 x 1, 800mm B) quantity: 20 / 24 / 30pcs C) hail resistance: diameter 25mm 3) temperature insulation layer: A) 50mm imported polyurethane, keep same temperature and high pressure foam B) heat preservation: 72 hours 4) capacity: 200 / 240 / 300 liters 5) tank diameter: 420 / 460mm 6) max. Pressure bearing: 0.6mpa 7) iso9001 / ce certificate/en-12975 8) 3 years' international responsibility for free repairing or exchange due to original Quality problems
Thermo siphon solar collectors provides mains pressure pre-heating via a high efficiency copper coil heat exchanger located within the solar collector tank. The way in which the Mains Pressure solar collector heats water is the same as the Non pressure solar collector. Rather than using the water in the tank directly, as the Non pressure does, the type uses a 45óª60 copper coil heat exchanger inside the tank which provides more than 1.2m2 of heat transfer area. When water flows though the coil it absorbs heat from the water inside the solar collector tank. The solar collector tank is therefore a thermal store. One advantage of this system is that almost no water is introduced into the tank apart from occasional topping up), so corrosion and scale buildup are almost totally eliminated. Tanks are designed for low to medium pressure applications using a gravity feed tank or pressure reduction valve. Direct connection to mains pressure water supply is not permitted. MODEL Lighting (m¬˜) Vacuum Tube Cubage (L) GW (kg) Qty.per20úº/40úº Container diameter Length No. LQ470-1800/58-20 2.99 ¼¦58mm 1800mm 20 165 120 37/74 LQ470-1800/58-30 4.42 ¼¦58mm 1800mm 30 250 160 25/51. MODEL Lighting (m¬˜) Vacuum Tube Cubage (L) GW (kg) Qty.per20úº/40úº Container diameter Length No. LQ470-H1800/58-20 2.99 ¼¦58mm 1800mm 20 165 120 36/73 LQ470-H1800/58-30 4.42 ¼¦58mm 1800mm 30 250 160 24/49.
1. Uni-directional heat transmission 2. Can start from lower temperature 3. Faster transmission 4. Lower heat capacity 5. Low temperature resistance 6. Freeze-proofing 7. High frequency soldering inner tank 8. Rating pressure is 0.6Mpaú¼0.4Mpa separately, can connect directly with the city water system 9. No water in the vacuum tubes eradicates the incrustation scale, thus keeping them running in high efficiency, 10. No water in the vacuum tubes eradicates the leakage due to the aging of silica gel gasket or broken of the tubes, Export cartons
Inner tank: Food Grade Stainless Steel by argon protect welding, supply water quality and drinkable Outer shell: Galvanized Steel coated uncorrosion layer Heat insulation layer: 50-60mm import polyurethane integral foaming Frame: Galvanized Steel coated uncorrsion layer, both install inclined and flat roof. High Pressure Cold Water In: 6 bar cold water to tank from Feeder or Electric Auto Valve. Automatic Heating Element free 1% spare parts are free 5 years quality warranty All install documents are free Export Cartons
Ke58s Vacuum tube: 58x1800mm Inner tank: stainless steel 304 2b food grade Outer tank: aluminum galvanized sheet Folded from mould with powder painting Outer tank dia.460mm Frame: aluminum with anti-oxidation treatment Insulation: 50mm polyurethane total forming with pressure and best density 40kgs/m3 Available sizes: 18, 20, 22, 24, 28, 30, 36 Tubes with capacity 135l up to 325l In cartons
KE47S Vacuum tube: 47x1500mm Inner tank: Stainless Steel 304 2B food grade Outer tank: Stainless Steel 304 BA Outer tank dia.420mm Frame: Stainless Steel Insulation: 50mm polyurethane total forming with pressure and high density Available sizes: 18, 20, 22, 24, 28, 30, 36 tubes with tank capacity 117L up to 230L
Material and major element of solar water heater: 1. Inner water tank: sus304-2b stainless steel /0.5mm thick 2. Outer water tank: white plate /0.4mm thick 3. Bracket: sus430 stainless steel /1.2mm and 1.5mm thick 4.Solar vacuum tube: A) size: 47 x 1, 500mm / 58 x 1, 800mm B) qty: 15 /18 / 20 / 24 / 30 pcs 5.Temperature insulation layer; 5.5cm imported polyurethane, keep same temperature and high pressure foam 6.Tank diameter:460 mm
Features: 1) The design of this type uses the all-glass evacuated solar collector tubes as the heat-absorb element. 2) Easy plug-in installation 3) Outer tank material: stainless steel plate or powder coated color steel sheet Key specification: 1) Inner tank: stainless steel SUS304-0.4mm 2) Vacuum tube: Ñ+47 x 1,500mm, Ñ+58 x 1,800mm 3) Tank diameter: 410mm, 460mm, 490mm 3) Outer tank: colored steel-0.4mm 4) Insulation: polyurethane 50mm-60mm 5) Frame: coated galvanized steel-1.5mm/stainless steel-1.5mm Type Area( º¦ ) Vacuum tube Volume(liters) Gross wet(kg) 20GP/40GP/40HC loading Qty(sets) ¿¬(mm) Length(mm) Qty(pcs) LC47/1500-15 1.87 47 1500 15 80 53 56/118/134 LC47/1500-15 1.87 47 1500 15 110 55 52/114/128 LC47/1500-18 2.25 47 1500 18 100 60 48/104/118 LC47/1500-18 2.25 47 1500 18 150 65 40/88/100 LC47/1500-20 2.50 47 1500 20 110 67 45/96/108 LC47/1500-20 2.50 47 1500 20 165 72 38/80/92 LC47/1500-24 3.00 47 1500 24 130 75 38/84/96 LC47/1500-24 3.00 47 1500 24 200 80 34/70/78 LC47/1500-30 3.75 47 1500 30 160 85 34/70/78 LC47/1500-30 3.75 47 1500 30 245 91 30/64/68 LC47/1500-36 4.50 47 1500 36 195 98 28/61/70 LC47/1500-36 4.50 47 1500 36 300 105 26/54/60 LC58/1800-12 2.24 58 1800 18 100 45 48/100/116 LC58/1800-14 2.60 58 1800 14 120 50 42/88/100 LC58/1800-16 3.00 58 1800 16 140 58 38/78/84 LC58/1800-18 3.40 58 1800 18 160 65 36/76/80 LC58/1800-20 3.70 58 1800 20 180 70 32/68/72 LC58/1800-24 4.50 58 1800 24 220 78 26/56/20 LC58/1800-30 5.60 58 1800 30 280 95 22/46/52
The feed water tank can automatically supply the water when you using the system. The cold water can be warm up when it flowing into the copper pipe. This patent broke the tradition of hot water using in the water tank. The volume of hot water is not limit for tank volume, and it founded the new times of hot water. Carton
Solar water heater system controller Features: 1) power supply: ac 220v +/- 10% 2) power consumption: < 5w 3) accuracy of tested temperature: +/- 2 degressc 4) range of temperature to be tested:0 - 99 degree c 5) power of controllable cycle pump:
Millionsunâ??s solar flat plate thermosyphon integrating system is composed of solar flat plate collector, pressurized water tank, bracket, circulation pipe and accessories.Due to thermosyphon principle, the collector absorbs solar energy to heat the water inside, while the thermosyphon circulation inside enables the heated water to flow into and be stored in the water tank.
Model: IRA-HP58/1.8-OEM12 Color: Custom made Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel Material of inner tank: Food grade 1.0 mm thickness SUS304 stainless steel Tank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamed Inlet and outlet hole: Female G 3/4 Max pressure: 0.9Mpa Solar collector tube: 3.3 Borosilicate glass with Al-SS/Cu coating 58x1,800mm with heat pipe Thickness of glass tube: 1.6mm Vacuum tube tightness: P0.005 Pa Absorption: as=0.93-0.96(AM1.5) Emission ratio: µh=0.04-0.06(80C±5C) Idle sunning property parameters: Y=220~260m2.C/KW Average heat loss coefficient: ULT=0.6~0.7W/(m2.C) Bracket: 1.0mm thickness of galvanized steel material Structure of tank: 4 holes for PT valve,water inlet and outlet,Mag Rod Welding: Argon arc welding Fastening pieces: Made of stainless steel screw Absorber area: 1.124m2 Heat pipe size: Dia14mm x 70mm length condenser,170cm length in total Heat pipe material: TU1 copper Heat pipe power: >120W/pcs Temperature tolerance: from -35C to 250C Tube quantity: 12 tubes Other Tube quantity: 8/10/12/15/18/20/24/30/36 tubes Tank capacity: 150L Other Tank capacity: 80/100/120/150/180/200/240/300/360L Heat pipe pressurized solar water heater features: 1.Adopts the best conduction performance metal- heat pipe (copper). 2.Can be used all year round in the cold climate. 3.High efficiency, rapid warming. Heat pipe in vacuum tube could transfer hot energy to cold water in pressurized solar water heater tank rapidly. 4.The whole pressure of the system is up to 1.5kg/M2, the inlet could connect the tap water directly, the max pressure can be 0.6Mpa. 5.No water in the tube, one tube broken don't influence the system working. 6.The design for inner tank is reasonable and scientific, which could hold 100, 000 times fatigue test without any damage. 7.Dual-purpose brackets for both flat and inclined roof. 8.The system is pressurized, it keep a constant temperature of water in the tank, avoid the problem came from water level controller malfunction which could cause water flow out. Pressurized solar water heater working principle: 1.The pressurized solar water heater tank has no exhaust hole, therefore, it must bear the pressure came from tap water. The hot water comes out because of water pressure. 2.Vacuum tube absorbs solar energy, and conductive copper pipe transfers the heat into the pressurized solar water heater tank. In this case, the water inside the tank becomes hot. 3.No water in the heat pipe makes the whole system could bear pressure.
Evacuated type solar collector Pressurized and non-pressurized systems
Separated pressure solar water heater This system is combined with solar collector, pressurized storage tank, work station, pipeline etc. 1. Solar collector can be the heat pipe solar collector, the u pipe solar collector, the balcony solar collector or the flat solar collector. 2. Inner tank for pressurized storage tank can be sus304-2b, ss316l or enamel tank. 3. Solar working station. 4. Working pressure :0.6mpa , testing pressure :1.0mpa Characteristic: 1. No disorder water tank on your roof: split solar water heating systems is using a high efficiency solar collector on your roof and a high pressurized storage tank in the house. Integrated in to the roof of the building perfectly. 2. Perfect solar collector for domestic hot water heating system can be combined with existing energy source, such as your gas water heater, electric water heater, boiler, etc. 3. There is an auxiliary heating device--electric heater booster in the tank, so providing hot water in case of cloudy or rainy days, you will no need to worry about it. 4. Completely automatic
SYSTEM DESCRIPTION Vision VS series split pressurized solar water heater incorporates a heat pipe solar collector, pressurized water tank, pump station and accessories. It is specially designed for villa buildings. The solar collector may be installed either on house roof or wall while water tank may be placed anywhere inside villa. MAIN FEATURES Reliable collector with average daily efficiency over 60.7% High efficiency heat pipe for fast and indirect water heating System works without drainage even if one tube is broken Super anti freezing performance for extreme cold climate High pressure hot water supply from solar storage tank Compatible with electric or gas heating devices Working all year round even in cold climate Designed for 30 years working life SPECIFICATION Tank capacity: 100 ~ 1000 Liter Vacuum tube size: F58*1800MM Solar collector tubes: 10; 12; 15; 18; 20; 24; 30 Pcs Vacuum tube: Three-target coating Cu/SS-ALN(H)/SS-ALN(L)/ALN Heat pipe tube: High-quality TU1 copper 14MM or 24MM condenser Manifold: Copper pipe header, rock wool & PU insulation, aluminum casing Inner tank material: Food-grade stainless steel SUS304-2B or SUS316L Tank insulation: High-density PU foam with 80 hour heat preservation Outer tank material: High-quality color steel or stainless steel SUS304 Bracket material: Shaped strong aluminum alloy or stainless steel Accessories: Solar pump station; electric heater; magnesium anode Solar collector angle: 25°; 38°; 45° Hail Resistance: 25MM Anti-freezing: -40°C Working pressure: 6.0 bar
Bontel Advantages: 1.The high weather-proof selective absorbing film from full-automatic magnetron sputtering production line developed by Bontel; 2.With Bonding heat transferring technology and laser welding technology; 3.High quality low-iron tempered glass with surface treatment to get high transmittance and low emittance; 4.Circulation fluid in closed copper pipes, no glass tubes. So collectors without corrosion and circulation fluid leaking; 5.The solid built-in absorber plate can absorb all solar radiation improve working efficiency and integrated well with buildings.