Micro Silica Sand: Micro silica also known as fume, is an amorphous (non-crystalline) polymorph of silicon dioxide, silica. It is an ultrafine powder collected as a by-product of the silicon and ferrosilicon alloy production and consists of spherical particles with an average particle diameter of 150 mm. The main field of application is as pozzolanic for high performance concrete because of its extreme fineness and high silica. Applications : Silica is added to Portland cement concrete to improve its properties, in particular its compressive strength, bond strength, and abrasion resistance. These improvements stem from both the mechanical improvements resulting from addition of a very fine powder to the cement paste mix as well as from the pozzolanic reactions between the silica fume and free calcium hydroxide in the paste. Advantages : Addition of silica also reduces the permeability of concrete to chloride ions, which protects the reinforcing steel of concrete from corrosion, especially in chloride-rich environments such as coastal regions and those of humid continental roadways and runways (because of the use of deicing salts) and saltwater bridges.
Best quality Portland Cement Type 42.5. Packing possible 50kg bags, bags in jumbo or bulk in jumbo.
Best quality Portland Cement Type 52.5. Packing possible 50kg bags, bags in jumbo or bulk in jumbo.
Portland Cement Type 01 / ASTM C150 / 50 Kg Bag
We manufacture this type of cement with limestone, low iron content kaolin clay, and gypsum. Customers use our White Portland Cement in architectural works requiring great brightness and artistic finishes, to create mosaics and artificial granite, and for sculptural casts and other applications where white prevails.
Our Cement is a fine powder, obtained from the calcination at 1,450 C of a mix of limestone, clay, and iron ore. The product of the calcination process is clinker the main ingredient of cement that is finely ground with gypsum and other chemical additives to produce cement. We offers an array of blended cements which have a lower CO2 footprint resulting from their lower clinker content due to the addition of supplementary cementitious materials. The use of blended cements reinforces our strong dedication to sustainable practices and furthers our objective of offering an increasing range of more sustainable products.
Product: OPC BS EN 197-1:2000 CEM-1 42.5N/R SRC BS 4027 : 1996 Class 42.5N-LA MSRC ASTM C 150 - 1997 TYPE II
Sulfate-Resisting Portland Cement conforming to BS 40271996 Class 42.5 N-LA, as well as ASTM C 150-18, Type V.
Kaolin: Kaolin uses are multiple and diverse. Kaolin are used as functional filler, extender, ceramic raw material and pigment because of its whiteness and fine particle size. Kaolin also hold importance as raw material in refractory applications, concrete, rubber and fiber glass manufacturing. We, as a Kaolin Exporter welcome any size of international orders from Middle East and other countries. Applications: Paper: Kaolin used as a coating pigment and as a filler to replace fiber. It possesses desirable optical properties. Concrete: Kaolin helps to improve strength and durability of concrete. When added to concrete mix, reacts with free lime released during cement hydration to produce additional cementitious material, resulting in an improved high performance concrete. Plastics : Kaolin is widely used as filler in the plastics industry because of its inert chemical nature and its unique size, shape and structure. Agriculture : It is used as a carrier and diluent in fertilizers, pesticides and related products. It is suitable as carrier because it aides the retention of the formulations on the plant. Rubber : It is commonly used as functional filler in rubber applications. While Kaolin improves overall performance for Rubber in general, different types of white pigment play specific roles in rubber application. Paint : Kaolin used as an extender in paints. It reduces the amount of expensive pigment such as Titanium Dioxide. It assists with desirable rheological properties that help maintain proper dispersion and provide bulk to the product. Ceramic : Kaolin improves whiteness and brightness of ceramic body. Good plasticity, good shrinkage, low water absorption and casting rate are also very important properties of kaolin.
Portland Cement Type I Astm C150 Advantages: * Minimize corrosion of steel structures by preventing Cl-�¬ ions; SO4 (2-). * Ensuring concrete properties and ensuring safety for steel structures in aggressive environment by sulfate and acid and alum contaminated environments. * Reduced alkali reaction - Aggregates enhance the durability of concrete. * Cement has high plasticity, easy to execute. * High intensity, especially as the intensity & durability increases, increasing the life of the project. * Increase workability and pumpability for concrete Improve lateral strength for concrete Application: * Constructing concrete for saline prevention dams, irrigation dams in soil and acidic alum water, irrigation dams with fluctuating water levels. * Marine constructions, underground constructions with sulfate. * Use in industrial environments, building factories that release acids that directly affect concrete floors, tanks & sewage pipes.
Portland cement.Trading
(( New Product comes in weight 20 KG )) wrapped on pallets The Ordinary Portland cement provided by Hail Cement Company acquired a certificate by GSO SASO.GSO 1914/2009. It is one of the most widely distributed cement types around the world because of its strength and resistance. It conforms to all usages that do not require certain specifications such as the other products that Hail Cement Company provides.
Portland cement 32.5N
Portland cement is used for ordinary purposes, as it is suitable for all uses that do not require certain properties, such as those available in other types, and it can be used in ordinary and reinforced concrete that is not exposed to certain effects such as sulfate salts found in soil and water, and it is a well-known and famous product around the world. This product is mainly made from grinding clinker and gypsum in compliance with standards ES 4756-1/2013 and EN 197-1/2011.
We are credible manufacturer and supplier of cement and are currently looking to build new relationships with potential buyers. Our Company has successful experiences in GCC ( Oman, Qatar and Kuwait) by offering the best quality and reasonable prices for cement. We are pleased to supply the best quality products with your required tonnage as follow: OPC (Ordinary Portland Cement) Type I 42.5 (bulk) Test Results of Chemical Properties available Test Results of Physical and Mechanical Properties available Other variants of cement types available based on your need
Ordinary Portland Cement (OPC) Bosowa Cement is high quality portland cement that has met national standards, namely SNI 2049: 2015 and international standards namely ASTMC 150 / C150M-12 and European standards EN 197 -1 CEM I. Portland cement type I is a suitable type of cement for a wide variety of concrete applications where special requirements are not required. USAGE: Bosowa Ordinary Portland Cement (OPC) can be used for road building construction, bridges and buildings, in addition, several projects development in Indonesia also uses BSW Ordinary Portland Cement (OPC) composite such as Sultan Hasanuddin Airport, Bridge II of Samarinda City, Jayapura Underpass and so on.
BSW Portland Composite Cement (PCC) is at National standardized : SNI 7064: 2014 and International standard namely European EN197-1 CEM II is Portland cement with high quality. The hydraulic cement produced by grinding Portland cement clinker and Gypsum is easier to work with and producing a time-saving work. Bosowa Portland Composite Cement (PCC) can be used for general construction such as concrete work, masonry, gutters, driveways, walls, and manufacture of special building elements such as precast concrete, prestressed concrete, panels concrete, and also paving blocks
Ordinary Portland Cement Type II
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : FIRECLAY Type Acid Resistant Brick Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : * We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: * Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions - Heavy thermal shock Characteristic Fireclay Type Acid Resistant Brick - Test Standard Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20 Water Absorption, % - 0.1 to 1.8 ASTM C-20 Apparent Porosity, % - 4.05 to 4.14 ASTM C-20 Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279 Modulus of Rupture, Mpa - 14.6 ASTM C-67 Compressive Strength, PSI - 15500 to 17250 ASTM C-67 Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102 Surface Hardness, MOHS Scale - 7 Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236 Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : RED SHALE Type Acid Resistant Brick Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions Heavy thermal shock Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick Characteristic RED SHALE ACID RESISTANT BRICK Test Standard Bulk Density, gm/cc - 2.3 to 2.35 ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968 Apparent Porosity, % -0.5 to 1.75 S 4860 Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279 Modulus of Rupture, PSI -2133 to 3555 ASTM C-67 Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968 Abrasion Resistant , Volume in mm3 -69 to 85 EN 102 Surface Hardness, MOHS Scale - 7