Silicone tape, polyimide tape, polyester tape, glass cloth tape, esd polyimide tape, esd polyester tape.
Request an online quotation for Detectable Warning Tape via our website at: https://www.indevcogroup.com/building-construction/detectable-warning-tape/ Underground detectable warning tape is used in construction zones for alerting excavation crews about hazards, and underground cables, as well as provides easy buried pipeline detection and other types of warnings through printed messages on a roll. We also produce Non Detectable Warning Tape.
Standard number: 2006 GB/T13542.6-2006 Application range: The polyimide film is to be produced by cast method, which has High temperature resistance, resistance to radiation and excellent dielectric properties, applicable to electrical insulating of the class H electric motor and other electrical equipments , and other use electrical insulating materials. A. Technical requirements 1. Appearance: Film surface is bright and clean, not due, tear, particle, bubbles, Pinhole and foreign material defects ;Edge is tidy, without damage; Films supply in rolls. 2. Size 2.1. Thickness and allowable deviation: The standard thickness(um) 12.5 25 40 50 75 100 125 175 200 The allowable deviation(um) +1 +2 +2 +2 +3 +4 +4 +5 +5 -1 -1 -2 -2 -3 -3 -4 -5 -5 Note: Supplying according to customer request with thickness 12.5-22.5 um, allowable deviation can be negotiated by both sides. 2.2. Width: no less than 250 mm, deviation +/-1.6mm. According to the needs of the users, tape can be cut with different specifications. 2.3. Length: Supplying according to the requirement of customer. 2.4. Performance requirements Serial number Index name Unit Index 25um 40um 50um 75um 100um 1 density Kg/m3 1425 10 2 tensile strength horizontally Mpa Y165 vertically 3 elongations horizontally and vertically % Y40 Y50 4 shrinkage rate horizontally and vertically 150 400 % 0.35 2.5 5 industrial frequency electric strength 48H2 62H2 v/um Y240 Y200 Y180 Y160 6 surface resistance,200 Y1.0X1014 7 Volume resistance,200 M Y1.0X1010 8 Relative permittivity 48 62Hz - 3.5 0.4 9 dielectric power factor 48 62Hz - 4.0X103 10 long-term heat resistance temperature index - Y180. 1. Film should be wrapped in a tube on core and supply in rolls; Each volume in a plastic bag packing and seal, placing in dry and clean case 2. Each box packaging should specify model or type, product name, specification, batch number, gross weight, net weight, manufacturing date, manufacture ¡¥s name, and product test report. At the same time, marked "Moisture proof" "Prevent Impact" and other words in packing body. 3.Film should be stored in a dry and clean indoor, from the date of original shipment, shelf life for two years, more than storage life according to the standard check again, qualified can still use. 4. In storage and transport process, should avoid damp and mechanical damage.
Polyimide film, fep film, kapton, polyimide tape.
We are able to supply high quality Plastic flexible packaging BOPP/CPP laminating films from India. Our company is a private enterprise specialized in middle and high grade metallized films and other types of packaging and printing products. We are trading and selling company focused on packing, fabrics, yarn and textile products. And we are widely exported to the US, UK, Australia, Africa.
BIC Wite-Out Mini Twist Correction Tape, Non-Refillable, Blue/Fuchsia Applicators 0.2 x 314 , 2/Pack BIC Wite-Out Mini Twist Correction Tape, Non-Refillable, Blue/Fuchsia Applicators 0.2\" x 314\", 2/Pack - Convenient mini size. This correction tape is designed for left and right handed users. The integrated twist cap guards against tearing, and the tape itself is tear-resistant and film-based. Fixes mistakes fast. Write or type over it immediately after you use it. Fix mistakes fast with great coverage in the home, office or school with the BIC Mini Twist Correction Tape. BIC Wite-Out Brand Mini Twist Correction Tape With its convenient mini size, BIC Wite-Out Brand Mini Twist Correction Tape makes it easy to make corrections on your home, school, and office documents. From America's #1 Correction Brand, this tear-resistant film-based tape applies dry, so you can immediately write over it to make corrections. The integrated twist cap guards against tearing, and the self-winding wheel lets you easily rewind tape, so it sits firmly on the tip. This pack contains two mini dispensers each containing 26.2 feet of white correction tape that are suitable for both left- and right-handed use. At a Glance: Convenient mini size for easy storage and portability Tear-resistant film-based tape applies dry Integrated twist cap guards against tearing Fix mistakes fast--great for home, school, or office 2 dispensers, each with 26.2 feet of white correction tape Package Contents:2 BIC Wite-Out Brand Mini Twist Correction Tape Dispensers. Additional information Weight 0.02 lbs Type Correction Tapes-Non-Refillable Color White Length 236 in. Width 1/6 in. Refillable No Correction Tape Type Non-Refillable Dispenser Color White Features Flexible Tip Non-refillable Odorless Protective Cover Line Coverage 1 Global Product Type Correction Tapes-Non-Refillable Correction Tapes Post-Consumer Recycled Content Percent 0% Pre-Consumer Recycled Content Percent 0% Product Line Wite-Out Recycled No Tape Color White Tape Length 314" 314" Tape Width 0.2" 0.2" Total Recycled Content Percent 0% Dispenser Type Micro Case Color Blue Fuchsia
Thermal Conductive Polyimide Kapton PI Film Descriptions: Thermal Conductive Polyimide Kapton PI Film also call thermal conductive kapton film,it is a thermally conductive film, possesses higher thermal conductivity properties than standard polyimide film. This property makes it ideal for applications requiring efficient thermal energy transfer, such as loudspeaker voice coils frame, electrical insulating pads and flexible printed circuit board. Moreover it also can offer an excellent combination of electrical, physical and mechanical properties. Features: Excellent thermal conductivity Good dimensional stability Chemical resistance High and low temperature resistance Applications: Voice coil frame of loudspeaker Flexible Printed Circuit (FPC) Insulation Pads (heat sink) Ceramic board replacement
High Temperautre Insulation Polyimide PI Film Descriptions: High Temperautre Insulation Polyimide PI Film is a general-purpose film, synthesized by polymerizing an aromatic dianhydride and an aromatic diamine. It has excellent balance of electrical, mechanical, physical, thermal, and chemical properties over a wide range of temperatures from -269â?? to 400â?? (-452â?? to 752â??). It also has good dimensional stability, radiation resistance, and flame resistance. It does not melt or burn as it has the highest UL-94 flammability rating: V-0. Features: High dielectric strength Good dimensional stability Chemical resistance Radiation resistance Flame resistance UL V-0 UL approved qualified film Temp resistance from -269â?? to 400â?? (-452â?? to 752â??) Applications: PI Film can be metallized, punched, formed, laminated, or adhesive coated. It can be used in a variety of electrical and electronic insulation applications: wire and cable tapes,motor slot liners, magnet wire insulation, formed coil insulation, transformer and capacitor insulation Polyimide Adhesive tape or polyimide laminates. . Coverlay or Stiffener in F-PCB Polyimide Label Polyimide tubing.
Polyimide film Mortech corporation: is a thermostable electronic material specialized manufacture supplier, the main product includes: polyimide film, We could supply belows: 1.Polyimide film with thickness : 0.02mm, 0.025mm, 0.035mm, 0, 05mm, 0.075mm, 0.1mm, 0.125mm, 0.15mm, 0.175mm, 0.2mm, 0.225mm.Widely used in electrical and electronic industry 2.Polyimide film adhesive tape made of polyimide film coated by acrylic or silicone adhesive on the side, widely used in electrical insulation and pcb's wave soldering industry. Thickness : 0.05mm, 0.06mm, 0.065mm, 0.08mm, 0.1mm, 0.12mm, 0.165mm More details, samples and customization also available Our objective: take the quality as the foundation, depends on the prestige to strive for the development!
Poylimide adhesive tape Polyimide adhesive tapes specifications: Sizethickness 1mil-5mil, width10-520mm, length 33m 1. Physical and mechanical performances A. Adhesive strength(n/25mm): 6.2 B. Elongation: 55% C. Tensile strength: 115mpa 3) dielectric performance A. Insulation grade: h(at 200f¦) B. Break-down voltage(kv): 7(at 200f¦) C. Insulation resistance 1x106 (at 200f¦) Rolls in carton with plastic foam liner
Polyimide tape, esd polyimide tape, polyester tape, esd polyester tape, glass cloth tape, electronic tape, silicone tape.
Corona resistance polyimide films ,not only with ordinary polyimide film electrical properties, good heat resistance and resistance chemicals, but also with the super corona resistance and good thermal conductivity performance, mainly apply to sintering electromagnetic winding wire ,traction motor, wind generators, and the special motor turn-to-turn insulation and heat insulation, the heat resistance level is a class C. The technical requirements: 1. Type CR type: Corona resistance polyimide film without any coating FCR type: Corona resistance polyimide film with F46 single side coating FCRF type: Corona resistance polyimide film with F46 double side coating 2. Appearance its appearance is golden brown, translucent, the surface is bright and clean, no wrinkles, tear, particles, bubble, pinhole and foreign material defects. Its edge is tidy, and without damage. 3. Thickness and allowable deviation Model CR type FCR type FCRF type Thickness(um) 25 38 50 Allowable deviation(um) 2 3 3 Note: coating thickness may be based on customer demand in 5 ~ 12.5 um range regulation. 4. Width and allowable deviation Width may cut according to the customer request within 600 -1050 mm. Each volume length is for 500-1000 m; Each volume joints for final product are not more than three, the proportion of volumes with joints vs the total volumes number in the one order is not more than 25%,the shortest length is more than 300 m; Single plate or roll products joint numbers are not more than three, the shortest length is more than 300 m. FCR type and FCRF type using thermal bonding lap. 5. Film marks: -Every single volume label marked: batch number, specification, net weight;Every single plate or roll labeling: specification. -Package should have obvious and firm mark; -The format of the packing cases is confirmed by purchase order related terms. Serial Number Type CR FCR FCRF 1 Corona resistance life (h) 1 KV voltage, frequency 20 KHz temperature 90 2 pulse rise time 400 ns Y80 Y80 Y80 2 Industrial frequency electric intensity (v/um) Y200 Y120 Y100 3 Surface resistivity 1X1014 1X1014 1X1014 4 Volume resistivity 1 1X1010 1X1010 1X1010 5 Relative permittivity (48-62 Hz ac) 3.2 0.4 3.2 0.4 3.2 0.4 6 Dielectric power factor (48-62 Hz ac) 13.5X10-3 13.5X10-3 13.5X10-3 7 Tensile strength (Mpa) : Y135 Y80 Y80 8 Elongation at break (%) Y40 Y40 Y40. 1. Testing method: According to the ICE62068-1-2003/ GB /T13542.6-2006 "electrical insulation, part 6," Polyimide film for electrical insulation regulation experimental method. 2. Film packaging: Film roll with plastic film packaging, outer with shockproof foam cushion packaging, and support in place in the package overhead, make the film in the transportation conditions often get fully protected without damage, each volume end article sticker marking. 3. Dust is strictly prohibited in the packing box internal. 4. Film should be stored in a dry and clean indoor, film roll to be supported in the box, placed suspended and not be erected. It should not be close to the fire, central heating or exposed to direct sunlight. 5. Products should avoid damp and mechanical damage in the storage and transport. 6. Film storage period is for two years after COA issued date. Expired films are still available after again qualified according to the product standards inspection.