The products are factory-well packed never been open before, the seal is unbroken and well labeled, and originally sealed boxes with all accessories Bulk order available 100% Guaranteed Fast shipping 100% Guaranteed After-Sales support 100% Guaranteed Genuine/Authentic Product 100% Guaranteed Factory warranty (International)
YAMAHA OUTBOARD ENGINES HS Code 840820 PRICE = US$2,000/PIECE CIF ORIGIN: THAILAND PACKAGE: TONS MIN ORDER:5 PIECES DESCRIPTION As well as its indestructible (almost) composite shaft, the great little M18 outboard is tough in every other sense too - from its hard-working, permanent magnet 12-Volt motor and its hardwearing, weed-resistant power propeller right down as far as its hard-to-damage casing. In short, it goes where you go. With no drama. Electric-Drive Technical specs Amp Draw 42 Voltage 12 Mount Feature Lever lock Max Thrust (kg) 18.2 Speeds (FWD/REV) 5 FWD/3 REV Digital Maximizer False Shaft Length 914 mm Battery Meter False Control Telescoping Tiller
Scrap ship propeller
Description by Manufacturer ENGINE Engine Type V6 Bore x Stroke 3.63 x 3.00 in. (921 x 762 mm) Displacement 186 CID (3,046 cc) DIMENSIONS Shaft Length 25 in. (635 mm) Weight 528 lb. (240 kg) GENERAL Propshaft Horsepower 175 HP (131 kW) Full Throttle Operating Range 5000-6000 RPM Gear Ratio / Shift F-N-R Cooling Water-cooled with thermostat & pressure-controlled The Mercury Diesel Outboard is a diesel two-stroke designed for light duty commercial patrol boat applications. The EPA certified engine joins the U.S. Department of Defense spec diesel outboard Mercury Marine released in May 2015. The Mercury Diesel Outboard features exclusive spark ignition, direct fuel injected 2-stroke technology which enables it to run on readily available ultra-low sulfur diesel fuel. SPECIFICATIONS HP: 175 HP (131 kW) Engine type: V6 Displacement: 186 CID (3,046 cc) Displacement: 3.0 L Full throttle: 5000-6000 RPM Shaft length: 25 in. (635 mm) Gearcase ratio: 2.08:1 Dry weight *Lightest model available: 528 lbs (240 kg) Bore and stroke: 3.63 x 3.00 in (921 x 762 mm) Fuel system: 2-stage Direct Fuel Injection (DFI) Cooling system: Water-cooled with thermostat & pressure-controlled Gear shift: F-N-R Exhaust system: Through prop KEY FEATURES Available with a 25â?? (635 mm) center section and the 2:1 Fleet Master gearcase in both right-hand and left-hand rotation. Industry-exclusive spark ignition diesel engine. Glow plug ensures consistent, reliable cold starting. Commercial patrol boat models meet EPA emissions standards. Cylinder heads designed specifically for combusting diesel fuel. High performance cylinder liners for maximum horsepower and optimal engine running quality. Fuel/air mixture is injected into the combustion chamber at 95 psi for enhanced high rpm running quality.
2023 Yamahas 15hp 40hp 70HP 75HP 90HP 115HP 250HP 4 Stroke Outboard Motor / Boat Engine SHIPPING AND DELIVERY : * We offer free shipping and delivery to all new customers, delivery is made directly to your doorstep. * Delivery takes just 3 working days, no custom troubles because the company takes care of all procedures. * We also offer wholesale and retail purchase, with good discounts the more you buy, the better your discount. * Tracking number is issued immediately after shipment is done.. Payments How To Order ? Specification Product Authentic Product Safe Packaging Shock-Resistant - Three layer of packaging Accessories Comes with complete accessories in Original Box Items Original Packing & Delivery SHIPPING AND DELIVERY : * We offer free shipping and delivery to all new customers, delivery is made directly to your doorstep. * Delivery takes just 3 working days, no custom troubles because the company takes care of all procedures. * We also offer wholesale and retail purchase, with good discounts the more you buy, the better your discount. * Tracking number is issued immediately after shipment is done.. Payments How To Order ? Step 1 : Please tell us what model and quantity you need. Step 2: We will make an Order Invoice for you to confirm the order details. Step 3: When we confirm everything, You proceed with the payment arrangement. Step 4: Finally we deliver the goods within the stipulated time. FAQ Q1: Can you accept small orders? A: Yes, we accepted a trial order for the first time, it is the start of business and our long-term cooperation in the future. Q2:.What's your payment terms? A: We accept Bank , Alibaba Payment Q3: What are the shipment terms ? A: Express( DHL, FEDEX, TNT, UPS). -- Takes 3-7 Days express delivery after receipt of payment. -- Tracking number will be sent to you after shipment, you will receive all important shipping updates by email Step 1 : Please tell us what model and quantity you need. Step 2: We will make an Order Invoice for you to confirm the order details. Step 3: When we confirm everything, You proceed with the payment arrangement. Step 4: Finally we deliver the goods within the stipulated time. FAQ Q1: Can you accept small orders? A: Yes, we accepted a trial order for the first time, it is the start of business and our long-term cooperation in the future. Q2:.What's your payment terms? A: We accept Bank , Alibaba Payment Q3: What are the shipment terms ? A: Express( DHL, FEDEX, TNT, UPS). -- Takes 3-7 Days express delivery after receipt of payment. -- Tracking number will be sent to you after shipment, you will receive all important shipping updates by email
All types of Safety shoes with steel toes as well as office workers
Marine safety materials and electronics, marine special instruments (UTI tapes, gas meters).
Marine salvage.
2 Stroke 30Hp Long Shaft Outboard Engine Boat Motor 30 HP outboard motor displacement is smaller, it easier for maintenance, will give you performance and reliability for your long days of boating. In many countries (especially for the developing areas) of the world where outboard demand is primarily for commercial uses, the water quality, weather and climate variance and long hours of continuous use make for a very harsh use environment. This is the two stroke outboard motor series developed mainly for commercial use such as on fishing and passenger vessels. This series suits harsh conditions that include everyday use and situations involving long hours of continuous operation. Enhanced strength and durability in locations such as roller bearings, crankshaft and cylinder block, as well as an improved water pump that ensures plenty of cooling effect, combine to deliver substantial improvements in durability and reliability.
Product descriptions from the supplier Specification High item High quality 3 cylinder E75BMHDL 55.2kw 5500rpm outboard marine engine for boat Condition New Engine 4 Stroke Fuel Type Diesel weight 108kg Engine type marine engine Engine Model E75BMHDL 12.54LDisplacement 1140cc Warranty 1 Year Aplication marine Aspiration turbo-charged Cooling System water-cooled Rated Power 55.2KW Engine status high quaility cylinder 3
We Are Suppliers Of High Quality Yamaaha Outboard Engines Both Used And New. We Have A Wide Range Of 350HP, 300HP, 250HP, 200HP, 150HP, 100HP 75HP, 60HP 40HP AND MORE EXTREME OFFSHORE PERFORMANCE AND DURABILITYâ??NOT TO MENTION STRIKING GOOD LOOKS. The all-new four-stroke, 5.6L V8 425 hp XTO Offshore is more than an outboard. Itâ??s an integrated power system. Coursing with insightful engineering and industry-first technology such as an electric steering system, itâ??s revolutionizing offshore boatingâ??and the ownership experienceâ??for yacht-class boaters. Our integrated digital boat control system now features Set Point. This suite of satellite-guided boat control functions automatically maintains your position, heading or both. Suddenly fishing beneath the boat, controlled drifting and waiting in place are a snap for captains of any skill level. SPECIFICATION: Model Code 2: F40BEDL/ F40BETL Engine: 4 stroke, SOHC, In-line 3 Displacement: 747 cm�³ Compression Ratio: 9.4 Max. Prop Shaft Output: 29.4 kW (40 ps) @ 5500 r/m Full throttle rpm range: 5000 ~ 6000 r/m Fuel Induction System: Electronic fuel injection Starter System: Prime Start Lubrication: Wet sump Engine oil capacity: 1.7 l / 1.5 l * with/ without oil filter exchange Bore x Stroke (mm): 65.0 mm x 75.0 mm Fuel consumption: 13.6 l/h @ 5500 r/m Trim & Tilt: Hydro (5-steps) Shallow Water Drive Positions: (continuously variable) Gear ratio: 2.0 (26/13) Engine transom height: L: 536 mm (21.1 Dry Weight: 100 kg
Diameter As per Customer size or drawing Usage/Application Dock & Ship Port Material Rubber Type Rubber Fender Color Black
Oil Resistant, Wear-resistant, Seawater Corrosion Resistant and UV Aging Resistant. Suitable for Controlling the Diffusion and Transfer of Oil Spill in Ocean or Other Waters.
Oil Resistant, Wear-resistant, Seawater Corrosion Resistant and UV Aging Resistant. Suitable for Controlling the Diffusion and Transfer of Oil Spill in Ocean or Other Waters.
1.High-impact protection certified to ANSI Z87.1,Military Requirements and CE EN166. 2. The widest field-of-view and optically correct goggle lens provide unprecedented visual clarity. 3. 2.8 mm polycarbonate high impact lens , High-performance U.S. imported coating provides superior protection against fogging and scratching. 4.Top and lateral forced air vents provide constant airflow while filtration media prevents small particle entry. 5.Interchangeable lenses for various light conditions - Clear, Smoke and Yellow 6.Polycarbonate lenses offer 100% protection from UV-A, UV-B and UV-C rays. 7.Pliable frame material and strapping system seals to face comfortably. 8.Low profile design ensures compatibility with helmet,sights, binoculars and night-vision systems. 9.Optional Prescription (Rx) Carrier available 11.WG:8.1KG 12.BOX SIZE38*18*8.5CM 13.CTN SIZE45*40*38CMM 14.PACKING:02 PCS of single goggles in one box,then105 boxes in one CTN1300 PCS/CTN.
Item No.: 7198 - 328 Size : 39 - 48 (5-14) Moq : N/A Soles : 7198 Dual Density Anti Skid Anti Static Insole Breathable Heat Resistant Sole Oil Resistant Shock Absorber Steel toe / Kavlar Steel Toe Cap Additional Product Info Overview Product Name : Safety Boot Standard : S1P SRA Sizes : 39 - 48 (5-14) Colors : Black Available Options Product Number : 7198-328 Standard : S1,S2,S3 TOE : Steel Midsole : Steel Sole : Dual Or Mono Color : Black / Brown Materials Upper : Buff Barton Lining : Cambrella TOE : Steel Midsole : Steel Footbed / Socks: Moulded Antistatic Sole : Single/Double Density PU/PU Certified : EN ISO 20345: 2011 Boot Care * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% Comfort Guaranteed * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Marine rubber fender.
Marine inflatable life rafts.