We are available with wide range of Plate Heat Exchangers: Alfa Laval A-10HBM M-10BW AM-10 A-10BFM M-10MFM AM-20HBM A-15HBM M-10BFM AM-20BFM A-15BFM M-15BFM MX-25BFM A-15BW M-15MFM AX-30HBM A-20HBM M-20M AX-30BFM A-20BFM M-3 P-252 AK-20FM M-30FM P-31 M-6M AK-20 P-32 M-6MW MK-15BW P-2 Contact Goyam Marine for further details
Relying on application practices, HFM Fully Welded Plate Heat Exchangers are widely applied in oil and gas industry, refinery applications, pharmaceutical industry, chemical/petrochemical industry, automotive, pulp and paper industry and steel industry. The Semi-welded Plate Heat Exchanger is particularly offered for heating and cooling of aggressive media. Two corrugated plates are positioned back to back and welded together as "cassette" by laser, along the sealing groove designed for the gasket of the semi welded PHE. The semi-welded plate for PHE is specially offered for aggressive media. Generally, two pieces of PHE stainless steel plates are welded back to back by laser along the sealing groove for the gasket to form the plate cassette. Each cassette is sealed with a gasket. The refrigerant flows from one cassette to the other, contacting with only two of the four ring gaskets at the inlet and the outlet.What are the advantages of Semi-Welded Plate Heat Exchanger?1. Wide temperature range from -38 to 2002. Maximum design pressure up to 30 bar3. Rigid mechanical construction4. Outstanding leak-proof for high safety5. Capacity in handling aggressive media6. Adjustable size7. Compact structure and small installation space
Plate and Shell Heat Exchanger is designed as a performance upgrade over shell & tube heat exchanger and welded, brazed plate heat exchangers. This heat exchanger type supplies high thermal performance with compact size, similar to that of gasketed plate heat exchangers, with low hold-up volume and low installed weight, especially when filled. But it can be applied well when the operation condition is high temp and high pressure to which gasketed plate heat exchangers cannot be applied.The heart of the Plate and Shell Heat Exchanger is its heat transfer element, also called the plate core/package, composed of round or oblong chevron-type plates welded into a cassette.What are the advantages of Plate and Shell Heat Exchanger?High heat transfer & Low foulingCompact structure & No gasketHigh pressure & High temperatureSmall terminal temperature difference & Low pressure drop Table. Parameters of HFM Plate and Shell Heat Exchangers ModelWW1DD1LPlate+TubeShell+TubeHPS1624098250168.3N*2.4+2DN15DN(15-80)HPS22448134.6310219.1N*2.4+3DN20DN(20-100)HPS46469174368269N*2.4+4DN40DN(25-200)HPS72565277460355N*2.8+4DN50DN(25-300)HPS128600298694464N*2.8+6DN80DN(25-350)HPS179693338725559N*2.8+6DN100DN(25-400)HPS647152065012501016N*3.2+6DN150DN(25-700)HPS1200182890015481372N*3.2+8DN300DN(25-1000)HPS16002098100018381562N*3.2+8DN350DN(25-1200)
Brazed Plate Heat Exchanger is small, light and compact. It does not need gaskets.Instead, it is brazed together using cooper to give a strong, compact construction.This heat exchanger is especially suitable for pressure up to 50 bar and temperatures from -196 to +550.What are the advantages of Brazed Plate Heat Exchanger? High heat transfer efficiency Compact structure Easy installation Easy Deinstallation DurabilityTable. Parameters of HFM Brazed Plate Heat Exchanger Model NoWidthHighthThicknessHole Center DistanceMax PressureMax Flow RateWeightHFQ10762069+2.3n172*421/3/4.58.00.7+0.06nHFQ15801909+2.3n154*401/3/4.58.00.7+0.06nHFQ25A783189+2.3n282*423/4.58.01.0+0.08nHFQ25B863159+2.3n269*403/4.58.01.0+0.08nHFQ3011131010+2.36n250*503/4.5181.3+0.12nHFQ3512430413+2.4n250*703/4.5182.2+0.16nHFQ3612228211+3.1n227*523181.88+0.104nHFQ50A11152510+2.35n466*503/4.5182.6+0.19nHFQ52B11152510+2.35n466*503/4.5182.6+0.21nHFQ60A11952610+2.24n470*633/4.5182.379+0.194nHFQ60B11952610+2.24n470*633/4.5182.379+0.194nHFQ90A19161611+2.35n519*923/4.5427.8+0.36nHFQ90B19161611+2.72n519*923/4.5427.8+0.44nHFQ10024849610+2.15n405*1573/4.5426.5+0.37nHFQ125A24652813+2.36n456*1743/4.5427.2+0.52nHFQ125B24652813+2.36n456*1743/4.5427.2+0.52nHFQ18030769613+2.76n567*3071.5/2.110010+0.51nHFQ21032173813+2.7n603*1881.5/2.110013+0.75nHFQ210A32173813+2.7n603*1881.5/2.110013+0.75nHFQ23032273913+2.55n631.7*205.23/4.510013+0.82nHFQ600429139822+2.78n1190*2201.5/2.130031.8+1.73n
Double-direction fresh air exchanging system, high efficiency and energy and energy saving. With the preliminary filter, it can filter the dust particles and purify the air. Thin body design makes it suitable for any kind of ceiling installation. It's with double speed switch which is easy to install.
Pshe consists of a circular plate group and shell. The plate group, enclosed in the pressure vessel, is the core of the heat exchanger. As heat transfer components, plates determine the heat transfer performance of the heat exchanger. Shell is the essential for the temperature, pressure capacity and safe and reliable operation. Based on specific operating parameters, media flow paths can be set properly, which ensures the reasonable match of heat transfer efficiency and the resistance loss, and at the same time minimizes equipment investment and operating costs.
Plate & frame type heat exchanger is a fully welded plate and frame heat exchanger, which consists of a fully welded plate group and removable covers. Four covers can be opened from four directions for the inspection, maintenance and cleaning of the plate group. By adjusting the flow structure and the installation position of the partition, it is suitable for different working conditions. Plate corrugation will match with medium properties. With compact structure, this kind of heat exchanger has high heat transfer efficiency.
A graphite heat exchanger is a device built for efficient heat transfer from one corrosive medium to another. The media may be separated by two parallel channels, so that they never mix, or they may be in direct contact.They are widely used in chemical plants, petrochemical plants, pharmaceutical factory, and so on.
Shanghai Empire Mechanical Engineering Co.,Ltd is one of the leading China plate heat exchangers manufacturers, welcome to wholesale plate cooler, plate evaporater, heat transfer equipment, gasketed plate heat exchangers, gasketed plate and frame heat exchanger from our factory.
Custom Made Heat Exchanger : Our supplier has produced many of heat exchangers in many stainless and metal material derivatives that require special design and manufacturing for our customers. The heat exchangers they produce work safely in many areas such as automotive, cement, ceramics, steam systems in the sector. All products are manufactured using world class welding skills based on universal technical and environmental principles. There are no manufacturing-related restrictions on the size of the heat exchanger required by our customers. Products that are not suitable for transport in one piece are designed to be part-assembled Welding Quality : Our supplier performs WPS and PQR welding procedures with trained and competent personnel. They perform welding x-ray examination under all conditions, including the possibility of welding in welding types such as robotic, argon, gas metal, electrode, and post-welding heat treatment, and pressure vessel class products under welding standards. Why Custom Manufacturing? : The need for different heat exchanger design and production parameters for different industrial areas is a natural process. The solution for non-fabricated heat transfer products is designing and producing according to needs
OD 15.88mm Heat Exchanger Tubing , Copper Finned Tube For Flooded Evaporator 1
Removable Plate Heat Exchanger: The Removable plate heat exchanger is a new type of high-efficiency heat exchanger composed of a series of metal sheets with a certain corrugated shape. Thin rectangular channels are formed between the various plates, and heat is exchanged through the halves. Plate heat exchanger is an ideal equipment for liquid-liquid and liquid-vapor heat exchange. Under the same pressure loss, the heat transfer coefficient is 3-5 times higher than that of the tubular heat exchanger, the floor area is one third of that of the tubular heat exchanger, and the heat recovery rate can be as high as 90% or more. This product is suitable for chemical, machinery, food, beverage, medicine, residential heating, hot water supply, air conditioning and other departments. Intermediate heat exchangers used in conjunction with boilers, intermediate heat exchangers in high-rise buildings, etc., soda ash industry, synthetic ammonia, alcohol fermentation, resin synthesis cooling, etc. Detachable plate heat exchanger is a new type of energy-saving heat exchange device with high heat transfer effect, compact structure, small footprint, easy operation, convenient cleaning, disassembly and maintenance, and easy to change the heat exchange area or process combination, etc. advantage. 1. The Removable plate heat exchanger has a compact structure with a small footprint, and the heat exchange area per unit volume is 2 to 5 times that of the shell-and-tube type. Unlike the shell-and-tube type, the maintenance site for drawing out the tube bundle is not reserved, so the same For heat exchange, the plate heat exchanger covers an area of â??â??about 1/5~1/8 of the shell and tube heat exchanger. 2. It is easy to change the heat exchange area or process combination. As long as a few plates are added or reduced, the purpose of increasing or reducing the heat exchange area can be achieved; by changing the plate arrangement or replacing a few plates, the required process combination can be achieved. It is almost impossible to increase the heat transfer area of â??â??shell and tube heat exchangers to adapt to new heat exchange conditions. Removable plate heat exchanger is a kind of heat exchanger that is widely used in heat exchangers. It is widely used in chemical, machinery, food, beverage, medicine and other occasions. Users should select and use according to actual needs and the advantages and characteristics of heat exchangers are used to choose, and well-known brand products are also very important.
The professionally designed stainless steel roller combined with the movable tightening baffle makes the on-site disassembly and assembly of the heat exchanger fast and convenient, and can effectively reduce the wear of the load on the upper guide rod, and the roller body is not easy to induce, thus preventing the occurrence of locking. Reliable operation, high efficiency, environmental protection, space saving and convenient maintenance are the basic and harsh requirements for current ships and marine engineering equipment. More than 30 varieties of heat exchangers ensure that the requirements for various working conditions of marine heat exchangers (central cooler/jacket water cooler/lubricating oil cooler/fuel oil cooler/air conditioner, etc.) The efficient solution ensures the normal operation of the ship's cooling system for a long time. The optional configuration of heat exchanger accessories (interface metal flanges, marine pressure and temperature gauges, post-insertion filters, etc.) also provides a user-friendly service for shipyards and shipowners. Features: Advanced board pattern design, high efficiency and environmental protection. Compact structure and small footprint. Excellent sheet, high reliability. Good and reliable seal with less leakage. After-sales service system, maintenance is assured. Application range: Capacity range: 0.1m3/h to 3000m3/h Operating pressure: 1.6MpaG Operating temperature: 150 Plate Material: Stainless Steel 304, 316L, Ti, Ti-Pd, 904L, SMO254, Hastelloy, Nickel Ni Gasket material: NBR, EPDM, HNBR, FKM (VITON-A, VITON-B, VITON-G), etc.
Transense Heat Exchanger Tube , 25.4mm Air Conditioner Copper Pipes 1
Stainless Plate Heat Exchanger: 1. Structural characteristics of stainless steel plate heat exchanger Stainless steel plate heat exchangers are mainly divided into flat plate heat exchangers and plate heat exchangers. The main advantages are reflected in the characteristics of easy disassembly, good cleaning, convenient maintenance, small size and small footprint. There are also many people asking whether to add an insulating layer. The heat loss of the stainless steel plate heat exchanger in the air is 1%, and the insulating layer is basically unnecessary. Second, the characteristics of stainless steel plate heat exchanger plates The stainless steel sheet is mainly formed by one-time stamping. What are the main advantages of doing so? 1. The corrugation depth of each plate is the same to ensure that each contact point can be well connected. 2. The weight of the heat exchanger equipment can be reduced, and a higher heat transfer coefficient can be obtained under the requirement of being able to withstand pressure. 3. There is no excessive punching area on the plate, and no invisible cracks will appear. 4. The thickness of the plate can reach 0.3mm. The plate of the stainless steel plate heat exchanger has a strong pressure bearing capacity, which can prevent the mechanical fatigue caused by the shaking caused by the vibration. Third, the advantages and disadvantages of stainless steel plate heat exchanger The main advantages of stainless steel plate heat exchanger are: 1. Scaling is not easy to occur, because turbulent water can effectively reduce the possibility of scaling. To prolong the working cycle, chemical cleaning methods are generally used for cleaning. It can effectively reduce human, financial and material resources. If you are not familiar with the fouling treatment method of plate heat exchangers, you can poke into this article to browse. 2. Compact structure and small size, can be used in multiple places. And the heat transfer is good, and the equipment is light in weight. 3. The speed of the fluid is uniform, and the material is heated during the period of time without overheating. The main disadvantages of stainless steel plate heat exchangers are: 1. As mentioned above, the thickness of the sheet is thinner and the pressure bearing capacity is lower, especially the contact points formed between the corrugated sheets. With the prolongation of use time, the pressing size will exceed the installation size, which may easily lead to the formation of pressure pits at the contact point, which may lead to perforation and lead to the scrapping of the plate. 2. The space between the plates is narrower and the evaporation time used is shorter. If the hot and cold medium is exchanged between the liquid material and the corrugated plate, if the material is cut off, it will be in a coking state, and the coking material will block the cold material passage and cause damage to the sealing gasket.
SEGMENT- Gas Heat Exchanger
Shell and tube heat exchanger is a device that transfers part of the heat of hot fluid to cold fluid, also known as heat exchanger. Shell and tube heat exchangers are general-purpose equipment in chemical, petroleum, power, food and many other industrial sectors, and play an important role in production. There are many types of heat exchangers, but according to the principle and method of heat exchange between cold and hot fluids, they can be basically divided into three categories: partition type, hybrid type and regenerative type. Among the three types of heat exchangers, the partition wall heat exchanger is the most widely used. According to the different heat exchange tube bundles, the partition heat exchanger is divided into: FPR floating coil heat exchanger, LWR threaded tube heat exchanger, and WMH eddy current heat film heat exchanger. Advantages of shell and tube heat exchangers: 1. High heat transfer coefficient: threaded pipe is a high-efficiency heat transfer element combining internal and external threads made of red copper or stainless steel with high thermal conductivity. The threaded pipe heat exchanger made of it has little fluid resistance. , then a strong turbulent flow is formed, which greatly improves the heat release coefficient inside and outside the tube. After testing, the total heat transfer coefficient of steam-water heat exchange is 3000~6000W/m2, and the total heat transfer coefficient of water-water heat exchange is 2500~5500W/m2. 2. Compact structure: This product has a large heat transfer area per unit volume. The total heat transfer coefficient is high, so the floor space is greatly reduced, saving materials and space. 3. Not easy to scale: Due to the special concave-convex structure of the threaded pipe, multi-flow layers and rotary scouring are generated inside and outside the pipe. In addition to the thermal expansion and contraction of the pipe, impurities will not remain inside and outside the pipe wall, so it is not easy to scale. , the long-term operation effect is good. 4. Not easy to leak: The sealing circumference of this product is short, the thick thread of the threaded pipe is similar to an expansion joint, and it has its own compensation ability. The thermal stress of the heat exchanger is small, and it is not easy to leak. 5. Easy installation: This series of heat exchangers has two types: horizontal and vertical, which are easy to install in different positions. 6. Compulsory supervisory inspection, reliable quality: manufactured, inspected and accepted in strict accordance with GB150-1998 "Steel Pressure Vessel", GB151-1999 "Shell and Tube Heat Exchanger" and related standards, and accepted "Pressure Vessel Safety Technology Supervision Regulations" supervision.
Industrial equipment Brazed plate heat exchanger is a new type of high-efficiency heat exchanger made of a series of metal sheets with a certain corrugated shape stacked and brazed. Thin rectangular channels are formed between various plates, and heat is exchanged through the plates. Compared with the conventional shell and tube heat exchanger, its heat transfer coefficient is much higher under the same flow resistance and pump power consumption, and it has a tendency to replace the shell and tube heat exchanger within the applicable range. Applications: Refrigeration: used as condenser and evaporator b. HVAC: intermediate heat exchangers used in conjunction with boilers, intermediate heat exchangers in high-rise buildings, etc. c. Chemical industry: soda ash industry, ammonia synthesis, alcohol fermentation, resin synthesis cooling, etc. d. Metallurgical industry: heating or cooling of aluminate mother liquor, cooling of steelmaking process, etc. e. Machinery industry: cooling of various quenching fluids, cooling of reducer lubricating oil, etc. Design Parameters Flow range: 1-2000 m3/h Working pressure: vacuum-8.2MPa Operating temperature: -195-538C Interface size: 1"-DN300 welding, flange, thread and other connection forms Corrosion resistance: Welding seal without rubber gasket, choice of various metal and alloy materials, super corrosion resistance, longer service life. Application field: Crude oil, natural gas purification and chemical products; chemical industry; pharmaceutical and specific chemicals; injection control systems; HVAC, district heating, thermal power plants; food processing; cooling tower heat recovery Process requirements Pickling temperature: Raising the pickling temperature is conducive to improving the descaling effect. If the temperature is too high, it will aggravate the corrosion of the pickling solution to the heat exchanger plates. Through repeated tests, it is found that the pickling temperature should be controlled at 60. 2) Concentration of pickling solution: According to repeated tests, the pickling solution should be prepared according to the concentration of formic acid 81.0%, water 17.0%, buffer 1.2%, and surfactant 0.8%, and the cleaning effect is excellent. 3) Pickling method and time: The pickling method should be carried out by a combination of static soaking and dynamic circulation. The pickling time is static soaking for 2h first, and then dynamic circulation for 3~4h. During the pickling process, samples should be taken frequently to test the pickling concentration. When the difference between the two adjacent test concentrations is less than 0.2%, the pickling reaction can be considered to be over. 4) Passivation treatment: After pickling, most of the scale and metal oxides on the surface of the plate heat exchanger will be dissolved and fallen off, exposing new metal, which is very easy to corrode. The sheet is passivated.
A double pipe heat exchanger is a sort of heat exchanger which includes concentric pipes parted through a mechanical closure. The name of this heat exchanger indicates that it makes use of pipes to exchange heat among fluids. One pipe has hot fluid whilst the opposite pipe has cold fluid. These two fluids do not mix with each other as they are separated by pipes. This heat exchanger is likewise known as a jacketed u-tube, jacketed tube, hairpin, and pipe-in-pipe heat exchanger. The double pipe heat exchanger has a small pipe this is surrounded by some other huge pipes. One fluid glide withinside the small pipe, and the opposite fluid acts through the annulus among the 2 pipes. The internal wall of the small pipe is the heat switch surface. The complete warmness switch system takes vicinity withinside the huge tube. In this way, the internal pipe works as a conductive barrier. The outside facet consists of fluid gliding thru the tube facet or inside. This heat exchanger might also additionally have one pipe or a package deal of pipes (however decrease than 30 pipes). The huge pipe has decreased by 2 hundred mm in diameter. In a few conditions, the internal pipe has vertical fins to enhance the heat switch coefficient among operating fluids. Double pipe heat exchangers are used for small heat switch areas (e.g., 14 m2). The collection connection to elevate the heat switch place wishes greater area and greater accessories, which results in a better strain loss. In addition, it isnâ??t always viable to boom the number of fluid passages on each side. This heat exchanger isnâ??t always exceptionally appropriate for grimy drinks due to the fact the grimy liquid will clog it, and the cleansing of this exchanger could be very hard. The essential benefit of the double pipe warmness exchanger is that it has a smooth operation and easy design.
Precision Equipments is the leading Shell and Tube heat exchanger manufacturer. A shell and tube exchanger consists of a number of tubes inter-connected inside in a cylindrical shell. This shell and tube exchanger heat through the tubes. there are two fluids cab exchange heat from one place to another. One tubes flows over the outside and other one flows through the tubes. Whether it is a liquid or gas can transfer easily. These tubes are aligned in parallel or cross arrangement. we are using Standard Quality raw material to manufacture of our products.
