Product Description 1.Features and Advantages of Grinding Steel Rod Concentrating on wear-resistant grinding material for 30 years, is one of the largest grinding rod manufacture in . We manufacture the product with the length of 2m to 6m and the diameter of 40mm to 140mm. The data is just for reference. The product can also be customized. After years of research and development, we finally develop the new-type steel grinding rod successfully. The newly developed product is characterized by low wear, unique chemical composition, high hardness of 45HRC to 55HRC, and strong toughness. Meanwhile, via the quenching and high temperature tempering treatment, the internal stress is removed. The product has good straightness, and won't break, bend and come out with two tapering ends. The economic benefit is much in evidence. a. The blanking of the steel grindng rod is implemented via the sawing machine. The dimensional tolerance would adide by the requirements of the order. After the implementation of blanking, the two ends of the raw material are polished into the R arc via the polishing machine. b. The surface of the product for the rod mill cannot have the crack, overburning and fissure visible to the naked eyes. c. The nonstraightness of the product is less than 0.2%. The diameter tolerance ranges from +0mm to -1.5mm. The length tolerance is fro +0mm-25mm. The fracture should be less than 3%. 2. Specification of Grinding Rod AS in the following sheet. 1) Size: Dia. 40 - 120mm, Length 2000-6000mm 2) Hardness: HRC 45-55 3) Chemical elements(%): C: 0.48-0.85, Si: 0.15-0.37, Mn: 0.7-1.0, P: 0.035 MAX, S: 0.035 MAX Nominal Diameter(mm) Dimensional Tolerance(mm) Roundness 20 2 6 252 6 30 2 5 35 2 5 40 2 5 50 3,1 4 3. Application And Packing The steel grinding rod is the optimum choice for the enterprises using the rod mill and the coal mill, such as cement plant, electric power plant, mine, quartz sand plant, silica sand plant, sand aerated industry, coal chemical industry, gas concrete plant, etc.
Huamin Supply Forged Grinding Steel Balls 20-40mm Our factory manufacture and export Forged Steel Grinding Ball for ball mill as follows: 1.Feature: The forged steel grinding ball is excellent in surface quality, toughness, and resistance to impact and abrasion. It won't crack and lose circularity easily. 1) In general, forged grinding steel ball has high hardness: Surface hardness to 55-67 HRC, volume hardness of 56-64 HRC 2) impact toughness high: Impact toughness more than 12 J / cm2. 3) broken rate is low: Peel fragmentation resistance property of over 20000 times. The actual breakage rate not greater than 1% and close to 0. 2. Specifications: 1) Diameters: Dia. 20 -40mm 2) Hardness: HRC 60-65 3) Chemical elements(%): Nominal Diameter(mm) Dimensional Tolerance(mm) Roundness % 20 �±2 6 25 �±2 6 30 �±2 5 35 �±2 5 40 �±2 5 50 +3,-1 4 60 +3,-1 4 70 +3,-1 4 75 +3,-1 4 80 +3,-1 4 90 +4,-2 4 100 +4,-2 4 120 +4,-2 4 125 +4,-2 4 130 +4,-2 4 140 +4,-2 4 150 +4,-2 4 3. Picture show 4. Packing Instruction: Barrel with wooden pallet: Steel Drum or Steel Barrel Barrel size(cm): 89 58 (Volume: 800kgs N. G. Avaliable) Pallet size(cm): 168 59 13 Two Barrel ties on the wooden pallet, steel tape for the bundle Strong Nylon Bag: Available Bag: 50kgs; 100kgs; 1000kgs
Are you looking for the new manufacturer of High Carbon Grinding Media Ball for concentrator mines for concerntrator? Which one will you choose? Please take some time to get to know our products and our company. 1"-6" High Carbon Grinding Media Ball for Concentrator Mines Our factory manufacture and export Forged Steel Grinding Ball for ball mill as follows: 1.Feature: The forged steel grinding ball is excellent in surface quality, toughness, and resistance to impact and abrasion. It won't crack and lose circularity easily. 1) In general, forged grinding steel ball has high hardness: Surface hardness to 55-67 HRC, volume hardness of 56-64 HRC 2) impact toughness high: Impact toughness more than 12 J / cm2. 3) broken rate is low: Peel fragmentation resistance property of over 20000 times. The actual breakage rate not greater than 1% and close to 0. 1"-6" High Carbon Grinding Media Ball for Concentrator Mines 2. Specifications: 1) Diameters: Dia. 20 - 150mm(1"-6") 2) Hardness: HRC 55-65 3) Chemical elements(%): Nominal Diameter(mm) Dimensional Tolerance(mm) Roundness % 20 2 6 25 2 6 30 2 5 35 5 40 5 50 +3,-1 4 60 +3,-1 4 70 +3,-1 4 75 +3,-1 4 80 +3,-1 4 90 +4,-2 4 100 +4,-2 4 120 +4,-2 4 125 +4,-2 4 130 +4,-2 4 140 +4,-2 4 150 +4,-2 4 3.Picture show 4. Packing Instruction: Barrel with wooden pallet: Steel Drum or Steel Barrel Barrel size(cm): 89 58 (Volume: 800kgs N. G. Avaliable) Pallet size(cm): 168 59 13 Two Barrel tie on the wooden pallet, steel tape for bundle Strong Nylon Bag: Avalible Bag: 50kgs; 100kgs; 1000kgs
Forged grinding ball features and advantages: 1. Surface hardness of up to 60hrc 2. High volume hardness as large as 55hrc to 60hrc, uniform hardness distribution 3. High impact toughness of greater than 12j/cm² 4. Low breakage rate, peel fragmentation resistance property of over 20000 times 5. Actual breakage rate not greater than 1% and close to 0
4)chemical industries 5)grinding mill, ball mill, coal mill Features of cast balls: 1) in general, high chrome casting grinding iron balls are famous for high hardness: surface hardness is to 60-68 hrc and volume hardness of 58-65 hrc; 2) high impact toughness: impact toughness is more than 12 j/cm2; 3) low broken rate: the actual broken rate is not higher than 1%; 4) wear-resistant: loss of grinding round rate is 80-500g/ton; Specification: 20-150mm Packing term 1) steel drums (with pallet): 850-900kg/drum 2)container bags: 1000kg/bag Steel drum or container bags
1.Forged grinding balls Our products range from 20mm to 150mm, 1 inch to 6 inch, and we can also offer all size of products according to clients demand. 2.Features: 1) forged grinding ball has high hardness: surface hardness to 58-65hrc, volume hardness of 57-64hrc 2) impact toughness high: impact toughness more than 12j / cm2. 3) broken rate is low: the actual broken rate is not higher than 0.5%. 4) loss of forged grinding ball round rate is low. 5) dropping test in 8m high tester for more than 20, 000 times.
Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,.Buying office, oem, components sourcing, value added services
Grinding media including forged grinding steel balls, grinding rods,casting steel balls,grinding cylpebs in uniform quality and lower consumption rate.
Forged Grinding Ball According to the present situation of 9.75 4.88m SAG mill, grid plate hole 60mm, and we recommended your company changed ball diameter from the original 120 to 125, filling rate from 9-10% to 11-12%, so that it is more effectively to increase the grinding quality and processing ore. Base on the high quality raw material, the advanced automated equipment, the heat processing and the strict quality control system, we can improve the surface hardness of grinding ball up to 58-65HRC and impact toughness of grinding balls is over 12J/cm,�. Features of forged grinding ball 1) High hardness: surface hardness of forged grinding balls is to HRC 58-65. The tolerance of the core hardness and surface hardness is not over 2HRC; 2) Good Impact Toughness: impact toughness of forged grinding balls is over 12J/cm,�; 3) Low Broken Rate: the actual broken rate is not higher than 1%. Physical Property ProductsSurface hardness (HRC)Core hardness (HRC)Impact value Ak(J/cm,�)Times of falling balls 60Mn Forged grinding ball ,�58-65,45,12,10000 B2 Forged grinding ball60-65,55 B3 Forged grinding ball60-65,55 B4 Forged grinding ball60-65,58 Name,�Chemical Composition(%) CSiMnCrPS 60Mn Forged grinding ball0.52-0.650.15-0.370.60-1.200.25-0.300.020.02 B2 Forged grinding ball0.77-0.810.26-0.340.72-0.800.32-0.400.020.015 B3 Forged grinding ball0.61-0.651.75-1.850.73-0.800.80-0.880.020.015 B4 Forged grinding ball0.68-0.721.25-1.350.55-0.650.85-0.950.0150.015 B6 Forged grinding ball0.79-0.820.15-0.350.92-1.020.88-0.980.0150.015 -
Forged & hot rolled steel grinding ball, grinding steel rods, chrome cast steel balls, chrome steel cast cylpebs.Manufacturer , transportation and shipping service.
The annual output of grinding ball is 200 thousand tons with available size dia 25mm-150mm. The high-speed production lines are all controlled by computers, which decreases manual intervention and guarantees product quality and stability. From source to finished product, we strive to manufacture high-quality and high performance grinding steel balls. 1.Material: b2, b3, bu 2.Surface hardness: hrc58-65hrc, volume hardness hrc56-63. 3.The impact toughness of our grinding balls is more than 18 j / cm2. 4.The actual broken rate
Electro galvanized wire BWG20 , wire diameter: 0.93-0.95 mm.
Grinding steel rods-grinding bar with proper heat treatment Diameter: 80mm-140mm Length: As per customer's request Hardness: HRC45-55 Application: Various rod mills for metal mines The grinding rods are produced by alloy steel materials, which have got the national patent. We have one complete strict quality control systems from the materials, production process and finished products to ensure the steady quality of the grinding rods. Should you have any interest, please feel free to contact us.
roduct Description 1 > High Hardness: Surface hardness: HRC57-67 HRC, volume hardness HRC56-64. 2 > High Impact Toughness: The impact toughness of our grinding balls is more than 12 J / cm2. 3 > Low Broken Rate: the actual broken rate is not higher than 1%. 4 > Good wear-resistant and lower wear rate. Product Feature 1)High quality High quality comes from every working procedure for the control . Grinding ball have no great differences in appearance, but in the actual effect of grinding efficiency is different, this is because the raw material, heat treatment process, equipment automation level and other factors can lead to the steel ball steel ball lapping efficiency differences, and ultimately affect the user cost of grinding . Every working procedure we always follow the details of the accused, by providing more wear- resisting of grinding ball to help customers to reduce the cost of grinding. Product Specification / Models 1 > Raw material contrast Ordinary company : directly using the scrap or various steel grades production, traditional little involvement in the high rate of grinding materials research and development. houde : have a deep cooperation with The Chinese academy of sciences and steel plant , according to different industry standard have in-depth research and development, developed raw material with higher grinding performance. Application 2 > Heat treatment of contrast Ordinary company : Usually use pure water cooling quenching with insulation barrels of tempering , the heat treatment method is easy to cause uneven hardness, the lack of resilience, steel ball high broken rate in practical use. houde : Closed cooling tower for effective control of quenching temperature within the scope of the standard, the composite heat treatment technology can improve the internal organization of steel ball, the ball while guarantee the hardness have sufficient toughness are less likely to break. Other Information 3 > Production craft contrast Ordinary company : degree of automation is less than manual intervention, there is no guarantee that the stability of each batch steel ball. houde : Fully automated production lines, greatly reduced the manual intervention, to ensure the stability of different batch grinding steel ball quality. JINAN HOUDE ABRASION RESISTANT MATERIALS CO., LTD. Caroline Zhang Sales Manager
Grinding steel rods: Diameter: 50mm-140mm Length: tailored. Hardness: HRC45-55 Application: Various rod mills for metalic mines,phosphate mines,silca sand makings. Charateristics: high hardness,no bending in the application,good wear resistance with long life. The grinding rods are produced by alloy steel materials, which have got the national patent. The grinding steel rods with heat treatment can improve the production and decreased the consumption up to 30% than the round steel bars used in the international market. We have one complete strict quality control systems from the materials, production process and finished products to ensure the steady quality of the grinding rods.Each piece of grinding rods has to be inspected qualified before delivery. Should you have any interest, please feel free to contact us.
Grinding steel rods: Diameter: 50-120MM Length: tailored. Hardness: HRC45-55 Application: Various rod mills for metalic mines,phosphate mines,silca sand makings. Charateristics: high hardness,no bending in the application,good wear resistance with long life. The grinding rods are produced by alloy steel materials, which have got the national patent. The grinding rods with heat treatment can improve the production and decreased the consumption up to 30% than the round steel bars used in the international market. We have one complete strict quality control systems from the materials, production process and finished products to ensure the steady quality of the grinding rods.Each piece of grinding rods has to be inspected qualified before delivery.
Dia 20 -dia 150 HRC 58-65 drums or container bag
Steel forged ball.
Grinding media balls for Gold Grinding Application fields:gold,copper,iron ore grinding mills 1.High carbon alloy steel for ball mill 2.High hardness and low wearing rate 3.Sizes available: DIA20-150MM or as per customers request 4.Hardness :HRC58-65 or as per your requirements
Product details: 1. Dia: 20-150mm. 2. Hardness: 58-67hrc. 3. Brekage rate: less than 0.5%. 4. Good wear resistance. Woven bag or iron drum. 1ton/bag 850kg/iron drum.
