Water Based Paints, Water Based Low Voc Enamels, Speciality Chemicals Like Acrylic Emulsions.
Bitumen Supplier Vg30/ 10 Bulk & Packed/ Emulsion/ Do.
Bitumen emulsion and LDO.
Paints like enamel paint, emulsion paint and bituminous paint.
Asphalt emulsion, bitumen related products, seal coating, crack filler, joint filler, asphalt rejuvenator.
Sbr (styrene Butadiene Rubber), Pa (pure Acrylic), Sa (styrene Acrylic) Emulsions.
Pigment Powder And Emulsion..
e, parking, school, hospital and new building or maintenance engineering in interior wall. Particularly suitable for renovate the loosen old wall coats. Specification: Sheen: matt Colour: white Theoretical coverage: 8m2/ time/kg(dry film thickness 30 micromete), note: the practical consumption may vary with substrate condition, construction methods, environment and other factors. Drying time: surface dry: 25min/25¡ãc, hard dry: 48 hours/25¡ãc; recoating: above 2 hours/25¡ãc (drying time will be change because of the different temperature and humidity.) Packing: 20kg/barrel Construction condition: 1. 40¡ãc>temperature>5¡ãc. 2. Relative humidity (rh)
Product data sheet Flutex 10 Product description Type: Latex wall paint, based on acrylic binder, matt. Flutex 10 provides a beautiful finish with a soft gloss. The product is easy to apply and to repaint, and it provides a robust and washable surface that stands spot cleaning. The opacity of tinted colours is indicated on the tinting label. Product application Suitable interior for walls, e.g. in institutions, offices, living rooms and corridors, where the surface is exposed to dirt and/or wear. Technical data Density: 1,35 kg/litre Gloss: 10, matt Solids: Weight%: 56 Vol.%: 40 Spreading rate: 8-10 m2 per litre and treatment£¨depending on the condition of substrate£© Wash ability Top Level (GB/T 9266-1988) Water vapour permeability: Sd= 0.21m equal to class 2, according to EN 7783-2 Application temp.: Recommended min. working temperature during drying/curing: +10¡æ Max. atmospheric humidity 80% RH Drying time at 20oC, 60% RH: Dry to touch: 1 h Recoat interval: 2 h Fully cured: Several days Dilution: 1st coat: Max. 10% water 2nd coat: Undiluted Cleaning of tools etc.: Water Storage: Cool, frost-free and tightly closed. 2.8L & 9.1L.
Flugger data sheet Facade 25 Product description Type: Acrylic emulsion elastomer wall covering facade paint, matt. Flugger Facade 25 is based on acrylic binder with high performance. It provides a weather-resistant, elastic, crack bridging and robust surface. The surface is permeable for water vapour, with a high barrier effect against CO2 and chlorides, which makes it suitable as concrete protection especially in urban environments. Protects the surface against formation of mould. The opacity of tinted colours is indicated on the tinting label. Product application Suitable exterior for finishing treatment on facades of concrete, masonry and plaster etc. Technical data Specific gravity: 1,35 kg/litre Gloss: 9 Solids: Weight%: 58 Vol.%: 43 Spreading rate: 8-10 m2 per litre and treatment£¨depending on the condition of substrate£© Wash ability Top level (GB/T 9266-1988) Application temp.: Recommended min. working temperature during drying/curing: +10¡æ Maximum atmospheric humidity 80 % RH Drying time at 20¡æ, 60% RH: Dry to touch: 1 h Recoat interval: 6 h Fully cured: Several days Dilution: 1st coat: 10% water 2nd coat: Undiluted Cleaning of tools etc.: Water Storage: Cool, frost-free and tightly closed. 2.8L & 9.1L & 18.2L.
Spray paints, emulsion paints.
Paints emulsions strainers.
Water base white emulsion paint.
Aluminium paint, bitumen emulsion.
Styrene acrylic co polymer, styrene acrylic emulsion, homopolymer.Manufacturer and exporter
Paints Like Enamel Paint Emulsion Paint And Bituminous Paint.
Marine paints, polyurethane paints, anti corrosive paints, architectural & decorative paints, anti carbonation & elastomeric paints.Manufacturers
Water Paints
Decorative paints like super emulsion, wall putty, interior primer, exterior primer, weather shield, high gloss enamel for metal and wood, furniture paint, fenomastic and texture coatings.
Paint for building, industrial, wood and steel like acrylic emulsion paint (interior / exterior), traffic paint (road marking paint), epoxy paint for floor 4. Poly-urethane paint (wood, steel), alkyd enamel paint, decorative paint (multi-color paint), putty ( interior/ exterior), lacquer.
