Specifications: - Origin: Vietnam - Taste: soft & sweet. - Shelf life: 12 months from production date, without air leak. - Preservation process: Dry, with 1-2% sugar. - Quantity capacity: 50 tons/month. MOQ: 1ton. - Packaging: in 10kgs carton, 1x20ft = 13mts. Price FOB HCMC Port: Please revert to me. Payment & delivery: L/C 100% at sight or T/T 30% in advance and 70% after receiving the copied B/L via email or fax.
Hand Sanitizer Clean Gel and Spray 1. Excellent removal of varlous harmful bacteria - Removal of various harmful bacteria that cause cold, food poisoning, and eye disease 2. Powerful cleaning - Optimal bactericidal effect containing a high concentration of 70% ethanol 3. Easily without water and soap - Easy to use without water and soap and towels * Price specially negotiable for larger quantities over 10,000pcs and 100,000 pcs respecitvely
Type: Cucumber. Preserved type: vinegar, brine. Acid: 0.35-0.55% (acetic acid). Salt: 2.4-2.6% (NaCl). Brix: 5.0-6.0%. Size (cm): 1-4; 2-5; 3-6; 6-9. Spices: celery, carrots, sugar, pepper, garlic or customer's formula. Packing: in jar of 720ml/1500ml, or in drum of 220 liters.
Foodix - Offering Instant Mysore Pak Mix. Product Description 1. In a pan, empty the contents of this pack and add 70 ml (Approx. 1/2 cup) of water and mix well without lumps. 2. Cook for 10 minutes in medium flame with continuous stirring & add ghee (Approx. 200 ml) at frequent intervals during the process. 3. Apply Ghee in a plate & transfer the Mysore Pak. Decorate with Nuts/Dry fruits of your choice if needed. Cut into pieces once it is cooled.{Ideally cutting is done when it is slightly warm only to avoid breakage} Serving size Approx.25g Grams of MysorePak, can be cut to 14 pieces.
We supply the Quality Ferro Alloys Like Ferro Manganese HC / MC / LC Grade I II III Mn 65% min 70% Min 75% Min Si 2% Max 2% Max 1.50% Max C 8% Max 8% Max 8% Max S 0.05% Max 0.035% Max 0.03% Max P 0.40% Max 0.30% Max 0.25% Max MC FeMn Mn 70%Min /75% Min / 78% Min Si 1.50% Max C 1.50% MAX S 0.03% Max P 0.25% Max Ferro-Manganese Ferro-Manganese is an alloy with high percentage of Manganese, which is made by heating a mixture of the oxides MnO2 and Fe2O3 and coal & coke with high carbon content in a blast furnace or an electric arc furnace-type system. The oxides go through carbothermal reduction in the furnaces that result in producing the Ferro-Manganese. Ferro-Manganese is used in the production of steel which acts as an excellent deoxidizer and desulfurizer. We supply the one variant of Ferro Manganese: High Carbon Ferro-Manganese.
Specifications: Origin: Vietnam Process: Vacuumed Fry. Taste: sweet & crispy. Moisture: 05% max. Shelf life: 12 months. Min order: 1000kgs. No sugar, no used oil, no preservatives and coloring, only vegetable oil, broken parts & unripe parts
Type: Tomato Powder (Herbal Extract). Variety : normal or cherry tomato. pH: 4. Acid: 4-4.5%. Salt : 0.8% - 1.0%. Brix : 22-24%, 18-20%, 28-30%. Quantity capacity : 50mts/month. MOQ: 1ton. Preserving in common condition, shelf life: 12 months. Packed in aseptic bag, drums 220kg, 1 x 20ft = 80 bins. Price: please contact for updated price. Payment & delivery: L/C at sight or T/T 30% in advance. Lead time: 2 weeks/ 1*20'FCL.
Product Name: Hoi An Silk lanterns Function - Decor Restaurant, Hotel, Wedding, Party, Event,..., - Gifts Material: Bamboo, silk Color - White, Yellow, Red, Dark Red, Blue, Purple, Green,... ( see table color) - For indoor decoration : use pattern fabric for indoor - For outdoor decoration : use plain fabric for outdoor - Can hand painted flowers, bird,... ; Print logo on lanterns according to customer's design Size - Size is length of lanterns when they're folded. Depend of shape, the bigest size can be 180cm (70'') - Avaiable size :10cm, 20cm, 30cm, 35cm, 40cm, 50cm, 60cm, .... to 180cm Shape: We have 12 shapes for for your choice Country of Origin Producting at Hoi An, Viet Nam MOQ:100 units Sample Available Payment Term: Bank Transfer, Western Union, MoneyGram, Credit Card Time for production: 2 to 15 days (depend on quanlity). With small orders, We will send within 2 days Delivery time - 4-30 days (depend on quantity and transport service) - ho chi minh Air port, Sea port Remark - Handmade high quality and competitive price. - Welcome customerâ??s design
This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites. Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature. Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts. PREPARATION OF FURANE MORTAR : Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life. Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.
Copra We make high-quality copra by drying fresh coconut meat (kernel) in hybrid solar dryers. With efficient and continuous drying technology, we can reduce the moisture content of fresh coconut kernels from around 50% to lower than 6% within 48 hours. This result can be achieved by utilizing solar energy during daylight and renewable energy from smokeless biomass burning all night long. Moisture content: maximum 6%, Free Fatty Acid content: maximum 0.5%, Green: 0%, Burnt: maximum 2%, Smoky: maximum 5%, Rubbery: maximum 5% We only pick mature coconut fruits for the drying process, coconut must be put in a dryer immediately after opening to prevent microbes such as fungus, mold, and bacteria to grow. We keep the temperature in the oven dryer between 60 to 70 degrees Celsius. We inspect the copra periodically during the drying process, any damaged copra should be removed from the oven dryer immediately.
Caustic Soda Flakes Caustic Soda Pearls / Bead / Prill / Granule Caustic Soda solid Molecular formula: NaOH Molecule Weight: 40 H.S code: 28151100 CAS: 1310-73-2 UN number 1823 Dangerous Class 8 We use rich natural gas resources and its strategic of liquid alkali procurement, storage, transport conditions, gradually formed transportation and sale of liquid alkali, production and sales base Specifications(Caustic Soda Pearls 99%min): 1. Item: STANDARD 2. NaOH: 99% 3. Na2CO3:0.5%max 4. NaCL:0.03%max 5. Fe2O3: 0.005%max Packing in 25KG net PP bag lined with double PE inner bags. Specifications(Caustic Soda Flakes 99%min) 1. Item: Standard 2. NaOH: 99%min 3. Na2CO3: 0.5%max 4. NaCL:0.05%max 5. Fe2O3:0.005%max Packing in 25KG net PP bag lined with double PE inner bags. Specifications(Caustic Soda Solid 99%min) 1. Item: Standard 2. NaOH: 99%min 3. Na2CO3: 0.9%max 4. NaCL:0.15%max 5. Fe2O3: 0.01%max Packing in 200KG net sheet metal drugs.
We are supplier of Potassium Sulphate 100 % Water Soluble, K2O : min 50 %, Chloride : Max 1 % Use: Agriculture Fertilizer K2SO4: 92% min K2O: 50% min Chloride: (0.5+-0.2) % Ca: (1.6 +- 0.1)% Mg: (0.09 +- 0.00)% Fe: (0.05 +- 0.01)% Na: (2 +- 0.2)% Moisture: (0.2 +- 0.01) % Melting Point: 1067 Deg Celsius pH: 3+-1 Solubility in Water: Soluble Bulk Density: 1.1 gm/cm^3 Potassium Sulphate also is known as Sulphate of Potash, is 100% water soluble source of Potassium (K) and Sulphur (S), It can be used in the greenhouse, open field for vegetables, cereals, oilseeds, lawn, turf, and nurseries
We offer Ammonium Nitrate in Granular and Crystalline forms. Ammonium Sulphate Physical State ; Powder Color : White crystalline powder Cas No. 7783-20-2 Arsenic (As) ; NMT 0.00002% Calcium (Ca) : NMT 0.001% Magnesium (Mg) : NMT 0.0005% Non-volatile substances : NMT 0.01% Active Ingredient ; (NH4)2SO4% Assay : Min 99.5% PH Value ; Min. 4.5 Chloride : NMT 0.0003% Nitrates : PNMT 0.001% Iron ; NMT 0.0002% Heavy Metals (as Pb) ; NMT 0.0002% Phosphate (PO4) ; NMT 0.0005% The primary use of Ammonium Sulphate is as a fertilizer for alkaline soils. In the soil the ammonium ion is released and forms a small amount of acid, lowering the pH balance of the soil, while contributing essential nitrogen for plant growth. The main disadvantage to the use of Ammonium Sulphate is its low nitrogen content relative to Ammonium Nitrate, which elevates transportation costs. It is also used as an agricultural spray adjuvant for water soluble insecticides, herbicides, and fungicides.
METHOD OF APPICATION: * Mastic compound application consist of two coats of. Primer ,Primer and followed by Mastic compound in recommended thickness, ranging from min. 12mm to 25mm in one or two layers to achieve desired thickness without any pin hole and crack. 1). Surface preparation and application of Primer: Refer application method of Primer. 2). After doing necessary surface preparation and application of primer coating, area to be installed with Mastic compound should be divided in to equal no. bays. To maintain even thickness required, place wooden or aluminum batten. Mastic compound is then broken in small pieces and put it in heating pan. While heating, keep material moving to avoid burning. It is heated until it comes in a uniform consistency and then applied on the surface and works it with wooden float, to achieve uniform thickness and smooth surface free from any pinholes. CHEMICAL RESISTANCE PROPERTIES: * Mastic compound has good resistance to weak, diluted acids, alkalis salts etc. It is not recommended to use against strong acids, oxidizing acid solvents, oil and fats STORAGE & PACKING: * Keep Mastic compound away from direct sunlight, heat solvents etc. Under this condition, its shelf life is unlimited. It is supplied in cake form and approx. wt. is 10 kgs. HEALTH & SAFETY: * Handle melted Mastic compound compound very carefully . Avoid contact with skin. It is advisable to wear protective wears at the time of use of Mastic compound and all other our products. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.
L-Lysine Sulfate 65%/70%, CAS No.60343-69-3, a brown granule, feed grade. L-Lysine is a necessary building block for all protein in the body. As a nutrition supplements, L-Lysine Sulfate used in food production, beverage, pharmaceutical, agriculture/animal feed. L-Lysine Sulphate 65%, equal to 65% lysine HCl, could provide 51% free lysine in the feed. It has already been proven that L-Lysine Sulphate has almost the same feed effects L-Lysine HCl. As an experienced L-Lysine Sulfate manufacturer and supplier, we has been supplying and exporting L-Lysine Sulfate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. L-Lysine Sulfate Specification ITEMS Specification Appearance Light brown granule Identity Corresponds Assay (L-lysine, On Dry Basis) 51% Assay (L-lysine HCl, On Dry Basis) 65% Sulfate Pass Test Loss On Drying 4% Residue On Ignition 4% Ammonium salt (as NH4) 1% Heavy Metals (as Pb) mg/kg 20 Arsenic mg/kg 3 PH ( 0.3g+50ml water 25C ) 3.0-5.0
2-head packaging machine (also can 4-18head according different capacity choice) Packaging speed 15bags/min Bag length 90-320mm Bag width 80-210mm Overall weight 400kg Power 1.8kw/220v Packaging capacity 20-1000ml Outer packaging size 820 x1220 x 2500mm Packaging form Back sealing This machine is an intelligent weighing automatic quantitative packaging machine with four scales and microcomputer control. Suitable for quantitative packaging of granular materials such as miscellaneous grains, nuts ,pesticides, fertilizers, veterinary drugs, premixes, additives, laundry detergent, salt, monosodium glutamate, white sugar, seeds, rice, snacks, hardware, etc. Performance characteristics: 1. High precision digital sensors enable precise measurement to be achieved instantly. 2. The microcomputer control system is technologically advanced, easy to operate, and more reliable to use. 3. Fast and slow vibration feeding, automatic correction of errors, achieving high-precision packaging. 4. Four scales work alternately, with fast packaging speed. 5. High quality stainless steel is used for the material contact part, which is anti-corrosion, dust-proof, and easy to clean. Host configuration: This machine is equipped with a dual CPU microcomputer control system, a 5-inch LCD display in Chinese or English, a user-friendly operation interface, automatic cursor detection and tracking, and simpler operation. Equipped with high-precision stepper motors to ensure the accuracy of the cutting position of each packaging bag.
Ethanol alcohol distillation column 1. It is standard 95-96% alcohol equipment. Also it can distill pure water. 2.The distillation system has  three columns  and  continuous  distillation  process.The process is the  same as industrial(large scale) alcohol equipment.  Mash distillation  column distills  fermented  mash or light alcohol  to 50% alcohol ethanol . It has red copper bubble cap trays, standard design. It auto continuously feeds material liquid, auto continuously produces 50% alcohol ethanol and auto continuously discharges waste,  ethanol discharge in waste 0.05%, better than international standard requirements. The first rectification distillation  column  increases  alcohol degree  to 70-75% ,  separates  fusel oil and high boiling point  Impurities.  It auto discharges waste water,  ethanol discharge in waste 0.05%, better than international standard requirements. The second rectification distillation  column  increases alcohol degree to 95%,  separates low boiling point  impurities  like acetaldehyde and methanol . 3.  The rectification system uses  industrial(large scale) standard process, but the whole set alcohol equipments are installed in one frame, like integration  module, even  you can run it by a button.
Distillation column For Ethanol Alcohol Plant 1. It is standard 95-96% alcohol equipment. Also it can distill pure water. 2. The distillation system has three columns and continuous distillation process.The process is the same as industrial(large scale) alcohol equipment.     a. Mash distillation column distills fermented mash or light alcohol to 50% alcohol ethanol .  It has red copper bubble cap trays, standard design. It auto continuously feeds material liquid, auto continuously produces 50% alcohol ethanol and auto continuously discharges waste, ethanol discharge in waste ?¤0.05%, better than international standard requirements.     b. The first rectification distillation column increases alcohol degree to 70-75% , separates fusel oil and high boiling point Impurities. It auto discharges waste water, ethanol discharge in waste ?¤0.05%, better than international standard requirements.     c. The second rectification distillation column increases alcohol degree to 95%, separates low boiling point impurities like acetaldehyde and methanol . 3.  The rectification system uses  industrial(large scale) standard process, but the whole set alcohol equipments are installed in one frame, like integration module, even you can run it by a button.
Sorbitol, E420, Cas no.50-70-4, sugar alcohol, an isomer of mannitol, manufacturing process from corn. Characteristic: Sorbitol is 60% sweet taste and 1/3 less calorie than sucrose; good moisturizer, stabilizer and anti-crystallization agent; used in many kinds of food, including sugar-free confectionery, gums, frozen dessert, bakery food and etc. As an experienced Sorbitol manufacturer and supplier, we has been supplying and exporting Sorbitol for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Sorbitol food grade specification ITEM STANDARD APPEARANCE WHITE CRYSTALLINE GRANULE OR POWDER ASSAY 99.0% MN SORBITOL 98.0% MIN REDUCING SUGARS 0.15% MAX TOTAL SUGARS 0.5% MAX PH(50% AQ SOL) 5.0-7.0 RESIDUE ON IGNITION 0.1% MAX HEAVY METALS 5PPM MAX NICKEL 1PPM MAX LEAD 1PPM MAX ARSENIC 1PPM MAX CHLORIDE 50PPM MAX SULPHATE 50PPM MAX TOTAL BACTERIUM 100P/G MAX COLON BACILLUS ABSENT IN 1G
Agricultural perforated plastic moving turnover nestable crate stackable plastic box 100% virgin PP Dimension: 600*400*375mm 600*400*320mm Loading: 35kg Stack load: 165kg Product description 1.Stackable: The stackable crates could stack firmly to save floor space.Suggest to stack 4 - 6 pcs high 2.Nestable: The nestable crate could nest during the transportation.70% space saving
