We sell Oil and Gas Products Wholesale Diesel gas d2 gost 305-82 Liquified natural gas Liquified petroleum gas Ultra -low sulphur diesel ( EN590) Light cycle oil Petroleum coke Eastern Siberia-pacific ocean oil ( espo) Jet fuel A1 Mazut Aviation fuel A-1 & Jp54 Bitumen Base oil Diammonium phosphate Naphtha Ultra Low Sulfur Diesel EN590,DIESEL D2,DIESEL VIRGIN OIL D6 We are an oil and gas company Agents, Facilitators and Mandate; we source crude oil for Refineries and large volume buyers, and other petrochemicals like AGO, LPFO, PMS, DPK and other Russia product origin listed below for the upstream and downstream sectors consumption. 1) D2- Gas Oil (Diesel) Lo.2-62 Gost 305-82 , Quantity- 50,000mt 500,000mt For Cif And Fob, Spot And Contract Basis. 2) Jp54 Aviation Kerosine Colonial Grade 54 Russia Origin, Quantity- 1,000,000bbls 8,000,000bbls For Cif And Fob, Spot And Contract Basis. 3) Aviation Turbine Fuel Jet A-1 Quantity- 1,000,000bbls 8,000,000bbls For Cif And Fob, Spot And Contract Basis. 4) Bitumen Quantity 50,000mt 500,000mt, Cif And Fob, Spot And Contract Basis. 5) M100 Mazut 100 Gost 10585-99 And 10585-75, Quantity- 50,000mt 500,000mt, Cif And Fob, Spot And Contract Basis. 6) Liquid Petroleum Gas.Gost 20448-90, Quantity 50,000mt 500,000mt, Cif And Fob, Spot And Contract Basis. 7) Liquified Natural Gas, Quantity 50,000mt 500,000mt, For Cif And Fob, Spot And Contract Basis. 8) Russia Sn 150 Base Oil, Quantity - 5,000mt 50,000mt, For Cif And Fob, Spot And Contract Basis. 9) Russia Sn 500 Base Oil, Quantity 5,000mt 50,000mt, For Cif And Fob, Spot And Contract Basis. 10) En590 Biodiesel, Quantity 50,000mt- 500,000mt, For Cif And Fob, Spot And Contract Basis. 11) Automotive Gas And Oil (Ago), Quantity 50,000mt 500,000mt, For Cif And Fob, Spot And Contract Basis. 16) Russia Export Blend Crude Oil (Rebco), Quantity 1,000,000bbls 6,000,000bbls, For Cif And Fob, Spot And Contract Basis.
E590 10PPM, Diesel E590 Gost Diesel Fuel Oil D6
Hallo Good day we supplying Jet Fuel A 1 and EN 590 10 PPM - Origin Kazhakstan and other Non sanctioned Countries Very genuine refinery - we have on going contracts - Long chain brokers please dont contact unless have direct contact with END buyer or Buyer Mandate - Need ICPO from direct buyer to refinery we assure best price and mark up ( conditional ) we can provide TTV, TTT, TTO , CIF , FOB
10PPM,500PPM,5000PPM, High Sulphur Price of product ( USD price or FOB price : FOB Jebel Ali, USD 600- USD 640 PMT Product origin : GCC / UAE Key Specifications/Special Features : On Request Minimum Order Size and Packgaing details : 100MT INTO DRUMS /FLEXI / ISO TANKS
We deals in petroleum and petrochemical products currently available for supply from Kazakhstan, Europe & Qatar. We handle worldwide supplies from our direct selling Refinery to AWSP on CIF/FOB. The listed products are available on CIF/FOB and we follow standards procedure selling Refinery: JP54, JETFUEL A1, VIRGIN OIL D6, D2, MAZUT, LNG, EN590-10PPM, BASE OIL, PET COKE, LNG & LPG etc Payment Terms: 100% SBLC/LC/DLC Origin: Kazakhstan, Europe, Qatar Contact us for more details. Thanks AWF Global Trading Company Limited.
Our 10PPM Diesel Fuel, compliant with GOST R 52368-2005 and EN590 standards, is a premium quality diesel fuel designed for high-performance and efficiency. This diesel fuel contains a maximum sulfur content of 10 parts per million (PPM), making it an environmentally friendly option that meets stringent European emission standards. Key Features: 1. Low Sulfur Content: With a maximum of 10 PPM sulfur, this diesel fuel significantly reduces harmful emissions, contributing to a cleaner environment. 2. High Efficiency: Engineered for optimal combustion, it ensures excellent engine performance and longevity. 3. Regulatory Compliance: Conforms to GOST R 52368-2005 and EN590 standards, ensuring reliability and quality. 4. Versatility: Suitable for use in a wide range of diesel engines, from passenger vehicles to heavy-duty industrial machinery. Benefits: 1. Environmental Protection: Lower sulfur content means reduced sulfur dioxide emissions, helping to combat air pollution. 2. Engine Protection: Enhances engine durability by reducing wear and deposits, leading to lower maintenance costs. 3. Fuel Economy: Improved combustion efficiency results in better fuel economy, saving costs in the long run. 4. Compliance Assurance: Meets international standards, ensuring compatibility and regulatory compliance across different regions. Choose our 10PPM Diesel Fuel for a cleaner, more efficient, and environmentally responsible fuel solution that does not compromise on performance.
Diesel fuel is generally a liquid fuel used in diesel engines, which ignites the fuel without sparking by compressing the inlet air mixture and then injecting the fuel. (Glow plugs, grid heaters, and block heaters help achieve high combustion temperatures during cold weather starting.) The most common type of diesel fuel is specific fractional distillation of fuel oil, but alternatives that are not derived from oil, such as biodiesel, biomass to liquid (BTL) or gas to liquid (GTL) diesel, are increasingly being developed and adopted. To distinguish these types, in some academic circles, petroleum-derived diesel fuel is increasingly referred to as oil-oil. Ultra Low Sulfur Diesel (ULSD) is the standard for determining substantially reduced sulfur diesel.
Light Cycle Oil (LCO) is a diesel boiling range product from Fluid Catalytic Cracking Units (FCCUs). FCCU is responsible for the production of petrol, LPG and Light Cycle Oil (LCO). There are various ways of economically upgrading LCO, which include hydrotreating, high pressure hydrocracking for full conversion of LCO into Naphtha and a more optimized partial conversion hydrocracking process. It can be used in susch industries as Agrochemical, Crude Oil, Petrochemicals, Petroleum Products.
Diesel fuel is generally a liquid fuel used in diesel engines, which ignites the fuel without sparking by compressing the inlet air mixture and then injecting the fuel. (Glow plugs, grid heaters, and block heaters help achieve high combustion temperatures during cold weather starting.) The most common type of diesel fuel is specific fractional distillation of fuel oil, but alternatives that are not derived from oil, such as biodiesel, biomass to liquid (BTL) or gas to liquid (GTL) diesel, are increasingly being developed and adopted. To distinguish these types, in some academic circles, petroleum-derived diesel fuel is increasingly referred to as oil-oil. Ultra Low Sulfur Diesel (ULSD) is the standard for determining substantially reduced sulfur diesel.
Mazut-100 is a fuel oil that is manufactured to GOST specifications, for example GOST 10585-75/99. GOST is the Russian system of standards. Mazut is almost exclusively manufactured in the Russian Federation, This product is typically used for larger boilers in producing steam since the BTU content is high. The most important consideration when grading this fuel is the sulfur content, which can mostly be affected by the source feedstock. For shipment purposes, this product has a high viscosity which drastically affect whether it is able to be pumped, shipping has unique requirements. Mazut is much like Number 6 Oil, and is part of the products left over after gasoline and lighter components are evaporated from the crude oil. The main difference between the different types of Mazut-100 is the content of sulphur. The grades are represented by these sulfuric levels: - "Very Low Sulphur" is mazut with a sulphur content of 0.5% - "Low Sulphur" is a mazut with a sulphur content of 0.5-1.0% - "Normal Sulphur" is a mazut with a sulphur content of 1.0-2.0% - "High Sulphur" is a mazut with a sulphur content of 2.0-3.5% - Very Low Sulfur mazut is generally made from the lowest sulfur crude feedstocks.
EN590 10 ppm diesel available FOB Singapore & Fujairah, Transaction terms are Tank To Tank, Tank To Vessel or Vessel To Vessel, very competitive prices.
D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world it has other names. Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2 percent water and one-half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400. Recent changes in fuel quality regulation now require further refining of the D6 in order to remove the sulfur, which leads to a higher cost. Despite this recent change, D6 is still less useful because of its viscosity as well as that it needs to be pre-heated before it can be used and contains high amounts of pollutants, such as sulfur. Since it requires pre-heating, it cannot be used in small ships or boats or cars. However large ships and power plants can use the residual fuel oil.