Breakfast bar: 4100 x 650 x 40mm Splashbacks: 3030 x 1210 x 6mm Upstand: 3000 x 100 x 20mm Packing: a strong shrink wrap, corners reinforced, very safe packaging.
1) species: chinese fir finger joint, two sides sanding with smooth suface and high strengthen 2) dimensions: 1, 220mm x 2, 440mm or any size 3) thickness: 10--35mm 4) glue: mr, e1 5) application: used for furnishing, decoration and construction 6)widely used as furniture material and the decorative material packing: export packing Set
Finger Joint Boards
Finger joint panel First of all we would like to introduce ourselves, we are one of the biggest manufacturers, specializing in wooden flooring and wooden panel in Vietnam. Our products are now mainly exported to Japan, Taiwan, Korea... We would like to make a good business with you by offering our products such as floorings, decking, decking tile and wooden panel are made from Laos pine, Vietnam Pine, Acacia, Pyinkado, Pomu ( Hinoki), Takkyan ( Asian Walnut ), Narra Padauk, Oak, Beech, ...with wide range of products from Solid flooring, Finger joint (UNI) flooring, Finger Joint Laminate flooring(FJL), Bangkirai decking, Acacia decking tile and Vietnam Pine Finger Joint Panel, window, door Jamb ( scantling), engineered wood flooring. 1.Wooden flooring: Size: 14/15/18 mm x 90/120/150 mm x 300/450/600/750/900/1050/1200/1500/1820mm A - Grade: The face shall be practically free of defects- no sap wood/ no heart wood/ no blue stain/ and no crack. A grade admits some small healthy knots with a max. diameter of 5.4 mm, with an allowance of 2 knots every running meter for 90mm wide and below. 3 knots are allowed for 120 mm wide and above. Uniform of color with small limited character marks. B v Grade : The face may contain small streaks, burls, slight imperfections, black lines, black colored knots and tight knots which do not exceed 2.45mm, with an allowance of 4 knots every running meter for 90mm wide and below. 6 knots are allowed for 120 mm wide and above. Knots should be repaired. In principle free of sapwood. . More color variation allowed within the parcel. C v Grade : The face may contain sapwood, big streaks, burls, imperfections, and knots which do not exceed 3.54mm in diameter. No pin worm hole is allowed. C- grade allows colored repaired knots. Sapwood is allowed for max. 30% of the width and 30% of the height. Sapwood should be repaired. The quality of ABC Grade: KD: 12% Less than 2 mm bending over 1000mm running meter Cupping is not allowed. Tolerance on length: +/- 1 mm Tolerance on thickness: +/- 0.1mm ( 15 thick and less), +/- 0.2mm ( 18 thick and less ) Wood species: Pyinkado, Narra Padauk, Takkyan, Hinoki, Oak, Laos Pine Packing: Nylon, Carton and Pallet 2.Acacia decking tile Size: 24x500x500 mm ( T x W x L) Size of Lamella : 12x50x500 mm ( T x W x L) Structure : Acacia decking tile is made from 9 surfaced lamellas and 3 bottom lamellas and are matched to each other with glue, screws and nails. 8-12% kiln dried Quality: 1.Surface quality: - A side is the front v view of the product. B side is the side view of the product. C side is the bottom side view of the product. - Sapwood is not allowed on the A and B side . - Diameter of dead knots on the side A and B is not exceeded 10mm. Dead knot on C side is not over 25 mm. - All dead knots are fill out with pasta ( wood flour mixed with glued ), same color with product¦s color. - No rotten, decay, blue stain, no bowing. Processing quality: - Allowed tolerance for lamellas in width and thickness: +/-0.1mm. - Product¦s surface must be treated with sandpaper, to be clean and clear and polished with oil. - All lamellas must be bevel v edge with radius of 2 mm. Packing: Nylon, Carton and Pallet 3.Decking Size: 20/30x105x2700/3000mm Grade A. One side free of defect. No crack, no cupping, no knot, no blue stain, no sapwood, no pinhole. One face grooves for non slip protection, Pencil round chamfer the long corner. KD : 25% Wood species: Bangkirai ( Yellow Balau ), Laos Pine Packing: Nylon, Carton and Pallet 4.Pine Finger Joint Panel Size: 18/24/33/36/38x300/610/915/1220x2300/2440/3640/4200 KD: 12% Grade A: No crack, no pinhole, no blue stain, no knot, lamella width 45mm Grade B, C: No crack, no pin hole, blue stain are allowed, knot allowed to be repaired. Wood species: Vietnam Pine, Acacia, Pomu Packing: Nylon, Carton and Pallet 5. Window scantling ( 3 layers ) Size : 72mm x 86mm x 5900/6000mm KD : 12% Grade A : No crack, no pinhole, no blue stain, no knot, lamella width 45mm Grade B, C : No crack, no pinhole, blue stain are allowed, knot allowed to be repaired, lamella width 40-45 mm Wood species : Vietnam Pine, Acacia, Pomu Packing: Nylon, Carton and Pallet Packing: Nylon, Carton and Pallet
ASME/ANSI/DIN/GOST/BS EN RF/FF/RJ 150#-2500# Carbon Steel /Stainless Steel /Alloy Steel Forged WN/SO/Threaded/Plate/Socket/Blind Flange 1.Material: Carbon steel A105/Rst37.2/C22.8/Q235 Stainless steel 304/304L,316/316L,321,ect. 2.Size:1/2"-48" 3.Pressure:150lbs-2500lbs PN0.6-PN16.0 4.Facing:RF/RJ/ FF 5.Standard:ANSI(ASME)16.5 16.47/DIN/JIS/UNI/... 6.Flanges of welding neck, socket welding, threaded, blind, slip on, lap joint are in accordance with ANSI 16.5 from 1/2" to 24" and classes 150 to 2500 (complete range). 7. Production process : raw material--cutting--heating--forging--heat treatment--maching--inspection.-washing-ex-working. 8. Certificate :ISO9001-2008 9. Used for : linepipe, heat exchanger, petroleum,chemical,power,gas,water,shipbuilding,construction,etc. 10.Blind, slip on, welding neck flanges are from 6 Bar to 40 Bar in accordance with DIN. 11.Flanges from 1/2" to 48" and up to 450 lbs are in accordance with BS10 Table D & Table E, BS Table F & Table H, BS Table J & Table K. 12.Flanges from 2kg to 210 kg are in accordance with JIS. 13.Flanges according to API 605/ASME B16.5/ASME B16.47 14.Depending on special purposes, flanges can be manufactured in different shapes and sizes 15. Excellent and high quality contro
A board consists of several finger or butt jointed stick that is laminated side by side with phenolic glue.
The grade AB, BC, acacia and pine finger joint Dimension: .Size 1220 x 2440mm MC below 12% density 530-560kg/m3 The standard is for exporting. If you have other requirements, please let us know.
Specification Moisture: 8 -12 % Lamellas/stave: 35 - 80 mm Length & Width tolerance: 3mm Thickness tolerance: 2 mm Glue: D4, both sides sanded Grit 180-240 Quality: AB, AC, BC or customizable About us Realizing the potential in export-import markets of domestic and foreign wood, has expanded the business market and diverse its products to meet customer needs worldwide. has been building a network of distributors in more than 18 countries worldwide and is constantly expanding. Our products: Wood finger jointed laminated board, solid wood panels, tabletop, plywood, MDF, finished furniture according to customer's request, etc.,
Rubberwood finger joint board jointed by plantation timber being kiln-dried and termites-treated. It has very little shrinkage making it one of the more stable construction materials available for furniture, toys, and kitchen accessories. Length (millimeter) 3650; 4500; 5100; 5900 Width (millimeter) 650; 710; 810; 1100. 1210 Thickness (millimeter) 18; 22; 30; 33; 40; 44; 50; 56; 60; 70 Specification: Moisture: 8 -12 % Lamellas/stave: 35 - 80 mm Length & Width tolerance: 0/+3mm Thickness tolerance: +/- 0.2 mm Glue: D4, both sides sanded Grit 180-240 Applications: Rubberwood boards are used for making indoor furniture such as cabinets, kitchen counters, and work tables top, indoor furniture,... Delivery & Payment Quantity: 21 - 22 cubic meters/20 feet Packing: as normal export standard Trade terms: FOB, CIF Payment terms: by TT or at sight irrevocable L/C Time of starting shipment: 25 - 35 days after receiving L/C or TT Min Order: 1 container x 20 feet (21 - 22 cubic meters) Supplying capacity: 200 x 40 feet containers. About us was founded in 2009, based on the multinational development of production of import and export trade. Realizing the potential in export-import markets of domestic and foreign wood, has expanded the business market and diverse its products to meet customer needs worldwide. Currently, SSR has been building a network of distributors in more than 18 countries worldwide and is constantly expanding. Our products: wood finger jointed laminated board, solid wood panels, tabletop, plywood, MDF, finished furniture according to customer's request, etc.,
Finger Expansion Joint
1. PRODUCT OVERVIEW VHF finger expansion joint made by Vinh Hung Investment and Production Co., Ltd (VinhHung IP), includes 2 types: Cantilever VHF-C and over-gap VHF-O, according to: AASHTO LRFD standards ASTM D354292 (2003) standards VHFC and VHFO are integrally manufactured with high accuracy finger plates and accessories such as bolts, rubber sheet/water prevention steel plates which help facilitate new construction and installation as well as inspection and maintenance works in service. VHFC and VHFO accommodate to medium movement to big movement and can be used for both straight and skew bridges. 2. PRODUCT CHARACTERISTICS Totally accommodate to medium and large longitudinal movements, and also vertical and transversal movement if any. Simple installation, maintenance and replacement, which allows to replace individual finger plates in short period of time and for each lane. High loading resistance capacity, especially the moving load. Also available for skew bridges. Rubber seal system is designed to be totally water-tight and prevent dust and debris. Can be designed to be compatible with different thicknesses of bridge decks. To ensure the long-lasting durability, VHF finger expansion joints are protected from corrosion with methods such as: 2-component epoxy coating, PUbased painting (Polyurethane), hot dip galvanization according to ASTM A123 standards and especially the Al Mg spraying method (at the ratio of 5% Al and 95% Mg) which ensures anti-corrosion durability of up to 100 years, proven by salt-spraying test in 6000 hours (8-hour dry-wet cycle repetition) under ASTM B117 standards. DIMENSIONS OF FINGER EXPANSION JOINT VHF-C15 ~ VHF-C30 (WITHOUT BOLT) MODEL DISPLACEMENT d A D C H min max min max VHF-C15 15 22 190 205 25 40 300 150 VHF-C20 20 22 230 250 30 50 300 150 VHF-C30 30 25 245 275 30 60 300 150
1. Product Overview VHF finger expansion joints made by Vinh Hung Investment and Production Co., Ltd (VinhHung IP), include 2 types: Cantilever VHF-C and over-gap VHF-O, according to: AASHTO LRFD standards ASTM D 3542 92 (2003) standards VHFC and VHFO are synchronously manufactured with high accuracy finger plates and accessories like bolts, rubber sheets-water prevention steel plates that bring profitability to new construction as well as inspection and maintenance work in service. VHFC and VHFO accommodate the medium movement to big movement and can be used for both straight and skew bridges. 2. PRODUCT CHARACTERISTICS Totally accommodate the medium and large longitudinal movements, and also vertical and transverse movement if any... Simple installation, maintenance and replacement, which allows to replace the individual finger plates in short period of time and for each lane. High loading resistance capacity, especially the impact load. Also available for skew bridges. Rubber seal system is designed to be totally water-tight and prevent dust and debris. Can be designed to compatible with different thicknesses of bridge decks. To ensure the long-lasting durability, VHF finger expansion joints are protected from corrosion with methods like: paint with 2-component epoxy coating, PU-based painting (Polyurethane).., zinc coating according to ASTM A123, and especially Al-Mg coating (Al 5% and Mg 95% ratio) which ensures the durability of 100 years. This method is proved by the brine spraying test in 6000 hours (dry-wet 8hour cycles) according to ASTM B117 standards.
I. Characteristics. - Moisture: 10 (+/-2%) - Lamellas/Staves: 35 - 80 mm. - Length & Width tolerance: 0/+3mm - Thickness tolerance: +/- 0.2 mm - Glue: D4 - Sanding: both sides sanded 180-240 grit Standard size(mm): Thickness: 12/15/18/24/26/30/38 Width: 650/1220 Length: 1883/2200/2440/3100 II. Application - Gyms - Furniture - Decoration - Music hall - Workshop building, wood stairs parts, wood scantling. - Warehouses, door, and window parts - Arched beams (mostly used). III. Packing and delivery: Quantity: 21 - 22 cbm/20ft Packing: as normal export standard Trade terms: FOB, CIF Payment terms: by TT or at sight irrevocable L/C Time of starting shipment: 25 - 35 days after receiving L/C or TT Min Order: 1 container x 20ft (21 - 22 cbm) Supplying capacity: 200 x 40ft containers
Product name Finger jointed panel/board Material Rubber wood,radiate pine wood,chinese pine wood Grade: AA,A,B Glue: E0 Size 4x8, or upon request Thickness 9-18mm Moisture 8%~12% Thickness tolerance +/-0.4mm to 0.5mm Packing Standard package with carton or plywood and steel tape Loading Quantity 20GP 8pallets/22M3 40HQ 18pallets/55M3 Usage making furniture or Decoration Payment TT ,DP or L/C at sight Certification CARB,FSC
Teak Wood Finger joint Size required by customers. The goods are firmly assembled. beautiful aesthetic. Double-sided polishing
We specialize in manufacturing and exporting finger jointed fingrer join garden standard tiles for export (Melia azedarach) . Customers need to import please contact
GERUTU FINGER JOINT LAMINATED AND DARK RED MERANTI 71 X 120 X 5.9
Overview The spiky leaves of Rosemary are perhaps as old as time. It has been used for flavouring of wines, waters and of course edible dishes too. Hotels often go the rustic route by placing a small bundle of rosemary and lavender on pillows, whereas rustic restaurants stick a handful of rosemary in a tiny pot as table decoration. This evergreen shrub is relatively easy to grow, and it is processed in the Middle East. Common Uses The perfect culinary marriage is lamb and rosemary. Every chef will confess to that. Rosemary is also used to add flavour to chicken dishes, especially stuffing, and its pine like taste is perfect in sausages too. It most definitely elevates vegetable stews, vegetable roasts and tomato dishes. Rosemary is often used in breads and even sweet baked goods. Recommended Storage The most important point is that dried herbs and spices can never go bad if they are kept dry. Yes, the potency is lost, but it will still influence the flavor of your cooking. Seeds, roots, leaves and flowers last longer than crushed or ground herbs and spices. When you are preparing to store your dry herbs and spices it is vital that they are completely dry. A good indication is to rub it with your finger to check if it crumbles. As oxygen degrades dried herbs and spices over time, you should store them in airtight containers. Glass jars with sealable lids are perfect, and so are metal tins. Plastic won't do for long terms storage. Sunlight also degrades dried herbs and spices; therefore, it should be stored in a dark cabinet that is both cool and dry. If your spice rack is near the stove or cooker, steam will degrade your herbs and spices each time you open the container while cooking. When buying in bulk, you should always store only some of the dried herbs and spices in a glass or metal container. Each time you open it, it is exposed to the elements. When buying in bulk it is useful to label your containers with the purchase date and discard date.
MHS1560*600 Technicial Specifications: Characteristics: Comb tenoning and splicing is an effective way to connect the timbers to a longer length, is able to increase the utility rate of shorter timbers and reduce resources waste. The automatic finger-joint production line features compact structure, rational arrangement, high precision and efficiency, and manpower saving, is widely used timbers processing industry. Model MXZ3515T Auto Finger Shaper (Include Glue Spreading) MXZ3515 Auto Finger Shaper MHZ1560 Auto Finger Joint Assembler Table size (W*L) 850*600mm 850*600mm ---- Max. working size (L*W*H) 850*80*150 850*80*150mm 6200*150*80mm Min. working size (L*W*H ) 200*30*20mm 200*30*20mm 1000*30*20mm Shaper spindle diameter 70 mm 70 mm ---- Shaper blade diameter 160 mm 160 mm ---- Main saw blade size 255 mm 255 mm 355 mm Shaper spindle speed 5000 rpm 5000 rpm ---- Main saw spindle speed 2840 rpm 2840 rpm 3700 rpm Spreader roller speed 58 rpm ---- ---- Total motor power 17.24 kw 16.12 kw 7.7 kw Working air pressure 0.8 Mpa 0.8 Mpa 0.8 Mpa Max. jointing force ---- ---- 7800 kg Max. production rate ---- ---- 31 m/min.
MHS1560*600 Technicial Specifications Characteristics: Comb tenoning and splicing is an effective way to connect the timbers to a longer length, is able to increase the utility rate of shorter timbers and reduce resources waste. The automatic finger-joint production line features compact structure, rational arrangement, high precision and efficiency, and manpower saving, is widely used timbers processing industry. Model MXZ3515T: Auto Finger Shaper (Include Glue Spreading) MXZ3515 Auto Finger Shaper MHZ1560 Auto Finger Joint Assembler Table size (W*L) 850*600mm 850*600mm ---- Max. working size (L*W*H) 850*80*150 850*80*150mm 6200*150*80mm Min. working size (L*W*H ) 200*30*20mm 200*30*20mm 1000*30*20mm Shaper spindle diameter 70 mm 70 mm ---- Shaper blade diameter 160 mm 160 mm ---- Main saw blade size 255 mm 255 mm 355 mm Shaper spindle speed 5000 rpm 5000 rpm ---- Main saw spindle speed 2840 rpm 2840 rpm 3700 rpm Spreader roller speed 58 rpm ---- ---- Total motor power 17.24 kw 16.12 kw 7.7 kw Working air pressure 0.8 Mpa 0.8 Mpa 0.8 Mpa Max. jointing force ---- ---- 7800 kg Max. production rate ---- ---- 31 m/min.