Incoloy Alloy 908 is a high-temperature, high-strength, and highly corrosion-resistant alloy composed of elements such as nickel, chromium, molybdenum, and iron. It is a single-phase austenitic alloy, typically formed by casting and forging. Chemical composition: The chemical composition of Incoloy Alloy 908 is composed of elements such as nickel, chromium, iron, molybdenum, vanadium, manganese, tantalum, silicon, carbon, phosphorus, and sulfur. Nickel content is 40-45%, chromium content is 20-23%, iron content is 16-19%, and molybdenum content is 8-10%. Mechanical properties: Incoloy Alloy 908 has excellent high-temperature and high-strength performance. Its tensile strength is 135 ksi (930 MPa) (minimum), yield strength is 70 ksi (480 MPa) (minimum), and elongation is 25% (minimum). Physical properties: The density of Incoloy Alloy 908 is 8.14 g/cm�³, the melting point is 1338�°C (2440�°F), the thermal conductivity is 11.7 W/m�·K (100�°C), and the coefficient of thermal expansion is 13.7 �¼m/m-K (20-100�°C). Corrosion resistance: Incoloy Alloy 908 has excellent corrosion resistance, especially in high-temperature, high-pressure, and highly corrosive environments. It can withstand the corrosion of corrosive media such as sulfuric acid, hydrochloric acid, nitric acid, and fluoride, and can resist chloride stress corrosion cracking (SCC). The international standard designations for Incoloy alloy 908 include UNS N09908 and W.Nr. 1.4876. There are also corresponding standards and specifications in different countries and regions, such as AMS and ASTM standards in the United States, EN standards in Europe, and JIS and JPI standards in Japan. Here are the specific standards and designations for Incoloy alloy 908 in different countries: United States: AMS 5545, AMS 5546, AMS 5547, AMS 5549, ASTM B408, UNS N09908 Germany: DIN 17752, DIN 17753, DIN 17754, W.Nr. 1.4876 United Kingdom: BS HR 6 Europe: EN 10095 Japan: JIS H4551, JPI-SB46 We can provide the following the form:Incoloy alloy908 coil; Incoloy alloy908 strip;Incoloy alloy908 plate; Incoloy alloy908 sheets; Incoloy alloy908 tube; Incoloy alloy908 pipe;Incoloy alloy908 flat; Incoloy alloy908 bar GB:HR 6/JIS:H4551/UNS:N09908/W.Nr:1.4876
904L (N08904, 1.4539) super austenitic stainless steel contains 14.0-18.0% chromium, 24.0-26.0% nickel and 4.5% molybdenum. 904L super austenitic stainless steel is a low carbon high nickel, molybdenum austenitic stainless acid resistant steel. It has very good activation-passivation transformation ability, excellent corrosion resistance, good corrosion resistance in non-oxidizing acids such as sulfuric acid, acetic acid, formic acid, phosphoric acid, and good corrosion resistance in neutral chloride ion-containing media. Excellent pitting corrosion resistance, good crevice corrosion resistance and stress corrosion resistance. It is suitable for sulfuric acid of various concentrations below 70�¯�¿�½?�?�°C, and has good corrosion resistance against acetic acid of any concentration and temperature under normal pressure, and the mixed acid of formic acid and acetic acid. Here are some of the most common international standards for 904L stainless steel: ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications ASTM A276/A276M: Standard Specification for Stainless Steel Bars and Shapes ASTM A312/A312M: Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes ASTM B625/B625M: Standard Specification for UNS N08925, UNS N08031, UNS N08034, UNS N08932, UNS N08926, UNS N08354, UNS N08830, and UNS R20033 Plate, Sheet, and Strip EN 1.4539: European standard for austenitic stainless steel with high molybdenum content EN 10028-7: Flat products made of steels for pressure purposes - Part 7: Stainless steels EN 10216-5: Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes EN 10217-7: Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes JIS G4304: Hot-rolled stainless steel plate, sheet and strip JIS G4305: Cold-rolled stainless steel plate, sheet and strip JIS G4312: Heat-resisting steel plate, sheet and strip GB/T 3280: Cold rolled stainless steel plate, sheet and strip GB/T 4237: Hot rolled stainless steel plate, sheet and strip GB/T 24511: Stainless steel and heat-resisting steel plate, sheet and strip for pressure equipments We can provide the following form:904L stainless steel coil; 904L stainless stee strip;904L stainless stee plate; 904L stainless steel sheets; 904L stainless steel tubes; 904L stainless steel pipe;904L stainless steel flat; 904L stainless steel bar
316Ti stainless steel is an austenitic stainless steel that is stabilized with titanium, which provides improved resistance to corrosion in high-temperature environments. Compared to standard 316 stainless steel, 316Ti contains a small amount of titanium, which stabilizes the material and prevents sensitization to intergranular corrosion. The addition of titanium also enhances the material's resistance to pitting and crevice corrosion in chloride-containing environments, making it suitable for use in chemical processing, pharmaceuticals, and power generation applications. 316Ti stainless steel has excellent mechanical properties and is easily formable, which allows it to be used in a wide range of applications. It can be welded using common welding techniques, and is often used to fabricate complex shapes and components. Some of the key properties of 316Ti stainless steel include: Corrosion resistance: 316Ti offers superior resistance to pitting, crevice corrosion, and intergranular corrosion in chloride-containing environments. High-temperature resistance: 316Ti can withstand high temperatures and thermal cycling without losing its corrosion resistance properties. Strength and toughness: 316Ti offers good strength and toughness, making it suitable for use in demanding applications. : 316Ti is easily formable using standard methods, and can be welded using common welding techniques. Overall, 316Ti stainless steel is a reliable and versatile material that is well-suited for use in a range of applications where high-temperature corrosion resistance and mechanical strength are required. American Standard: ASTM A240/A240M-20a European Standard: EN 10088-2:2005 Japanese Standard: JIS G4304-2005 Chinese Standard: GB/T 3280-2015 Here are some of the most common international standards for 316Ti stainless steel: ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications ASTM A276/A276M: Standard Specification for Stainless Steel Bars and Shapes ASTM A312/A312M: Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes ASTM A479/A479M: Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels EN 10088-2: Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes JIS G4304: Hot-rolled stainless steel plate, sheet and strip GB/T 3280: Cold rolled stainless steel plate, sheet and strip 1) Equipment resistant to sulfuric acid, phosphoric acid, acetic acid, acetic acid; 2) petrochemical; 3) Electromechanical hardware; 4) shipyard; 5) Power plants;
2507 stainless steel, also known as duplex stainless steel, is a type of stainless steel that contains high levels of both chromium and molybdenum, as well as lower levels of nickel. This combination of metals provides increased resistance to corrosion and high strength. The chemical composition of 2507 stainless steel typically includes 25% chromium, 7% nickel, 4% molybdenum, and small amounts of other elements such as nitrogen and carbon. The high levels of chromium and molybdenum make it highly resistant to pitting, crevice corrosion, and general corrosion in a wide range of environments, including seawater, acidic and alkaline solutions, and chloride-containing solutions. In addition to its excellent corrosion resistance, 2507 stainless steel also offers high strength and toughness, making it ideal for use in a range of applications that require high performance under demanding conditions. These applications include chemical and petrochemical processing equipment, oil and gas production equipment, and offshore platforms. Overall, 2507 stainless steel is a highly versatile and reliable material that offers exceptional resistance to corrosion, high strength, and toughness, making it an excellent choice for a wide range of industrial and commercial applications. The execution standards for 2507 stainless steel mainly include the following aspects: Chemical composition: Standards such as ASTM A240, EN 10088-2, JIS G4305, GB/T 3280 define the chemical composition of 2507 stainless steel. Mechanical properties: Standards such as ASTM A240, EN 10088-2, JIS G4305, GB/T 3280 define the mechanical properties of 2507 stainless steel, including tensile strength, yield strength, elongation, etc. Corrosion resistance: Standards such as NORSOK MDS D55, ASTM A923, ASTM G48, EN ISO 10204 define the performance and testing methods of 2507 stainless steel in various corrosive environments. Manufacturing process: Standards such as ASTM A928, EN 10217-7 define the manufacturing process and welding requirements of 2507 stainless steel. The following are some of the execution standards for 2507 stainless steel established by major countries or regions: United States: Standards such as ASTM A240, ASTM A789, ASTM A790, ASTM A928. Europe: Standards such as EN 10088-2, EN 10217-7, EN 10216-5. Japan: Standards such as JIS G4305, JIS G4304, JIS G4307. China: Standards such as GB/T 21833, GB/T 3280, GB/T 14976. Overall, while the execution standards may vary slightly among different countries or regions, they all aim to ensure the quality and performance of 2507 stainless steel. We can provide the following the form:2507 stainless steel coil; 2507 stainless stee strip;2507 stainless stee plate; 2507 stainless steel sheets; 2507 stainless steel tubes; 2507 stainless steel pipe;2507 stainless steel flat; 2507 stainless steel bar
410 stainless steel is a stainless steel grade produced in accordance with American ASTM standards, which is equivalent to 1Cr13 stainless steel, S41000 (American AISI, ASTM). 0.15% carbon, 13% chromium, 410 stainless steel: good corrosion resistance, machinability, general purpose blades, valves. 410 stainless steel heat treatment: solution treatment (�¢??) 800-900 slow cooling or 750 fast cooling.Features: high strength; excellent machinability; hardening after heat treatment; magnetic; not suitable for harsh corrosive environments. 410 stainless steel is a type of martensitic stainless steel that contains 11.5-13.5% chromium and has excellent corrosion resistance, high strength, and hardness. It is a magnetic material and can be hardened through heat treatment, making it suitable for use in various applications that require high strength and corrosion resistance. Some of the key properties of 410 stainless steel include: Corrosion resistance: 410 stainless steel is highly resistant to corrosion, including water, steam, and chemical environments. However, it is not suitable for use in highly acidic or alkaline environments. Hardness: 410 stainless steel has high hardness and strength, making it suitable for use in applications that require wear and abrasion resistance. Heat treatability: 410 stainless steel can be hardened through heat treatment, allowing for improved strength and hardness. Magnetic properties: 410 stainless steel is magnetic and can be used in applications that require magnetic properties. Some of the common applications for 410 stainless steel include: Cutlery and kitchen utensils Valve components and pump parts Bolts, nuts, and screws Springs and bearings Medical instruments and dental tools Oil and gas equipment Overall, 410 stainless steel is a highly versatile material that is well-suited for use in various applications where high strength, corrosion resistance, and hardness are required. Here are some of the most common international standards for 410 stainless steel: ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications ASTM A276: Standard Specification for Stainless Steel Bars and Shapes ASTM A479/A479M: Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels EN 10088-3: Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes JIS G4303: Stainless steel bars GB/T 1220: Stainless steel bars We can provide the following the form:410 stainless steel coil; 410 stainless stee strip;410 stainless stee plate; 410 stainless steel sheets; 410 stainless steel tubes; 410 stainless steel pipe;410 stainless steel flat; 410 stainless steel bar General blades, mechanical parts, tableware class 1 (spoon, fork, knife, etc.).
INCOLOY ALLOY 800HT is a high-temperature alloy that is highly resistant to corrosion and oxidation. It is composed primarily of iron, nickel, and chromium, and also contains small amounts of copper, titanium, and aluminum. This alloy has excellent mechanical properties and is highly durable, making it ideal for use in high-temperature and high-stress environments.INCOLOY ALLOY 800HT is a highly versatile alloy that is used in various industries due to its excellent mechanical properties, high strength, and corrosion resistance. Its applications range from chemical and petrochemical industries to aerospace and power generation, making it an essential material in modern technology. Incoloy alloy 800HT is a high-temperature nickel-iron-chromium alloy, also known as UNS N08811. Some international standards and specifications for Incoloy alloy 800HT include: American standards: ASTM B407, ASTM B163, ASTM B515, ASTM B514, ASTM B407, ASTM B408, ASTM B409, ASTM B564, ASME SB-407, ASME SB-163, ASME SB-515, ASME SB-514, ASME SB-407, ASME SB-408, ASME SB-409, ASME SB-564 European standards: EN 1.4876, EN 1.4959, EN 10216-5, EN 10217-7, EN 10222-5, EN 10269, EN 10272, EN 10296-2, EN 10028-7, EN 10095, EN 10204-3.1 Japanese standards: JIS G3456, JIS G3459, JIS G3463, JIS G3448 Chinese standards: GB/T 14992, GB/T 14994, GB/T 15001, GB/T 15003, GB/T 15007, GB/T 15009, GB/T 15011, GB/T 15013, GB/T 15014, GB/T 15021, GB/T 15023, GB/T 15025, GB/T 15027, GB/T 15029, GB/T 15031, GB/T 15033, GB/T 15037, GB/T 15039, GB/T 15041, GB/T 15043, GB/T 15045, GB/T 15047, GB/T 15049, GB/T 15051, GB/T 15053, GB/T 15055, GB/T 15057, GB/T 15059, GB/T 15061, GB/T 15063, GB/T 15065, GB/T 15067, GB/T 15069, GB/T 15071, GB/T 15073, GB/T 15075, GB/T 15077, GB/T 15079, GB/T 15081, GB/T 15083, GB/T 15085, GB/T 15087, GB/T 15089, GB/T 15091, GB/T 15093, GB/T 15095, GB/T 15097, GB/T 15099, GB/T 15101, GB/T 15103, GB/T 15105, GB/T 15107, GB/T 15109, GB/T 15111, GB/T 15113, GB/T 15115, GB/T 15117, GB/T 15119, GB/T 15121. BS:3072/JIS:NCF800H/UNS:N08811/W.Nr:1.4876 We can provide the following the form:Incoloy alloy800HT coil; Incoloy alloy 800HT strip;Incoloy alloy 800HT plate; Incoloy alloy 800HT sheets; Incoloy alloy 800HT tube; Incoloyalloy 800HT pipe;Incoloy alloy 800HT flat; Incoloy alloy 800HT bar INCOLOY ALLOY 800HT is widely used in various industries, including the chemical, petrochemical, and aerospace industries. Here are some specific applications of this alloy: Chemical Industry: This alloy is commonly used in the production of chemicals such as sulfuric acid, nitric acid, and acetic acid. It is also used in the manufacturing of heat exchangers and reactors.
444 stainless steel is a low-carbon, dual-stabilized ferritic stainless steel that is highly resistant to corrosion, especially in chloride environments. It is often used in applications where high corrosion resistance and good formability are required. Some of the key properties of 444 stainless steel include: Corrosion resistance: 444 stainless steel has excellent resistance to corrosion, especially in chloride environments such as seawater, brackish water, and chloride-containing acids and solvents. Heat resistance: It can withstand high temperatures up to 950�°C (1742�°F) without losing its strength or corrosion resistance properties. Formability: It has good formability and can be easily fabricated into various shapes and sizes. Weldability: It can be welded using common welding techniques, and does not require preheating or post-weld heat treatment. Cost-effective: Compared to other stainless steels, 444 stainless steel is a cost-effective option due to its lower nickel content. Some of the common applications for 444 stainless steel include: Automotive exhaust systems: It is often used in the manufacture of automotive exhaust systems due to its excellent corrosion resistance and heat resistance. Industrial equipment: It is also used in various industrial equipment such as heat exchangers, tanks, and piping systems. Kitchen appliances: It is used in the manufacture of kitchen appliances such as refrigerators, dishwashers, and ovens due to its good formability and corrosion resistance. Overall, 444 stainless steel is a highly versatile and cost-effective material that is ideal for use in corrosive environments where high corrosion resistance and good formability are required. Here are some of the most common international standards for 444 stainless steel: ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications ASTM A268/A268M: Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service ASTM A554: Standard Specification for Welded Stainless Steel Mechanical Tubing EN 10088-2: Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes JIS G4305: Cold-rolled stainless steel plate, sheet and strip GB/T 3280: Cold rolled stainless steel plate, sheet and strip We can provide the following of the form:444 stainless steel coil; 444 stainless stee strip;444 stainless stee plate; 444 stainless steel sheets; 444 stainless steel tubes; 444 stainless steel pipe;444 stainless steel flat; 444 stainless steel bar 444 stainless steel is generally used to manufacture stress corrosion resistant equipment, video machinery, automotive engine exhaust pipe storage tanks, solar water heaters, printing and dyeing machinery, heat exchangers, etc.
Incoloy Alloy 902 is a high-strength, heat-resistant, and corrosion-resistant alloy material with excellent mechanical properties and oxidation resistance. It is an iron-based high-temperature alloy composed of elements such as chromium, nickel, molybdenum, copper, aluminum, titanium, and zirconium. The main features of Incoloy Alloy 902 include: Corrosion resistance: Incoloy Alloy 902 has strong corrosion resistance and can resist the corrosion of many strong acids, alkalis, and saltwater environments. Therefore, it is widely used in the chemical, marine, and petroleum industries. Oxidation resistance: Incoloy Alloy 902 has excellent oxidation resistance and can be used for a long time in high-temperature environments without failure. Therefore, it is widely used in equipment and devices operating in high-temperature oxidation environments. High-strength performance: Incoloy Alloy 902 has extremely high strength and hardness, can withstand high stress and high loads, and is therefore widely used in high-strength fields such as aerospace, nuclear industry, etc. Good machinability: Incoloy Alloy 902 has good machinability and can be formed and processed by various methods such as hot working and cold working, suitable for the manufacture of products in various shapes and specifications. In summary, Incoloy Alloy 902 is an excellent high-temperature alloy material with excellent corrosion resistance, oxidation resistance, and high-strength performance. It is widely used in the manufacture of equipment and devices operating in high-temperature, high-pressure, and corrosion-resistant environments. Incoloy alloy 902 is a nickel-iron-chromium alloy with additions of molybdenum and niobium. Here are some international standards and specifications for this alloy: American standards: AMS 5221, AMS 5223, AMS 5225, AMS 5226, AMS 5230, AMS 5231, AMS 5542, AMS 5676, AMS 5717, AMS 5718, AMS 5719, AMS 5738, AMS 5801, AMS 5803, AMS 5804, AMS 5806, AMS 5580, ASTM B366, ASTM B408, ASTM B564, ASTM B649, ASTM B670, ASME SB-366, ASME SB-408, ASME SB-564, ASME SB-649, ASME SB-670 European standards: EN 2.4665 German standards: DIN NiCr21Mo14W, DIN 2.4665 British standards: BS HR 202 Japanese standards: JIS NW 4990 We can provide the following the form:Incoloy alloy902 coil; Incoloy alloy902 strip;Incoloy alloy902 plate;Incoloy alloy902 sheets; Incoloy alloy 902 tube; Incoloy alloy 902 pipe;Incoloy alloy 902 flat; Incoloy alloy902 bar BS: HR 202/JIS:NW 4990/UNS:N09902/W.Nr:2.4665
Incoloy 903 is a high-temperature alloy material, also known as Inconel 903, which is a kind of nickel-based alloy. It is mainly composed of nickel, chromium, iron, cobalt, copper, titanium, aluminum and other elements. It has good high temperature strength, creep resistance and corrosion resistance, and is widely used in aerospace, petrochemical, energy and other industries under high temperature and high pressure environments. and other fields. Following are some features and applications of Incoloy 903: characteristic High temperature strength: It has good strength and rigidity at high temperature, and can withstand stress and load under high temperature and high pressure environment; Creep resistance: It can be used for a long time without deformation under high temperature and high pressure environment; Corrosion resistance: good corrosion resistance in strong acid, strong alkali and other corrosive media; Machinability: Incoloy 903 can be machined, forged and welded through a variety of processing techniques. The international standards for Incoloy alloy 903 in various countries are as follows: United States: AMS 5800, AMS 5801, AMS 5802, AMS 5803, AMS 5826, ASTM B166, ASTM B408, UNS N19903 Germany: DIN 17742, DIN 17754, W.Nr. 2.4633 United Kingdom: BS HR 6, BS 3076 Europe: EN 10095 We can provide the following the form:Incoloy alloy903 coil; Incoloy alloy903 strip;Incoloy alloy903 plate; Incoloy alloy903 sheets; Incoloy alloy903 tube; Incoloy alloy903 pipe;Incoloy alloy903 flat; Incoloy alloy903 bar BS:HR 5/JIS:NW4893/UNS:N19903/W.Nr:2.4665 Incoloy 903 has a wide range of applications, mainly used in the following fields: Aerospace industry: components such as aero-engines, aero-bearings, gas turbines, etc.; Petrochemical industry: such as chemical reactors, high pressure vessels, steam generators and other equipment; Energy industry: such as nuclear reactor components, heat exchangers, coal-fired power plant boilers and other equipment; Other fields: such as the manufacture of high-temperature valves, heat treatment furnaces, medical equipment, etc.
J series of 201 stainless steel | J1, J2, J3, J4, J5 J1: The carbon content is slightly higher than J4, and the copper content is lower than J4. Its processing performance is not as good as J4 material. It is suitable for ordinary shallow deep drawing and large angle deep drawing products such as decorative panels, bathroom products, sinks, and product pipes. J2, J5: Decorative tubes are easy to process, high hardness (both above 96�°), polished and beautiful, but they are easy to burst when used for square tubes or curved tubes (90�°). In terms of flat panel, due to its high hardness, the surface of the panel is more beautiful, and surface treatment such as frosting, polishing, and color plating can be carried out. But the biggest problem is bending, bending is easy to break, planing is easy to burst, so the ductility is not good. J3: High carbon, low chromium and low copper, but because of its high carbon content and low copper content, the material is slightly harder, so it is not suitable for bending with a slightly stronger strength. Compared with 201 stainless steel J1 material, the ductility is not so good, and it is easier to rust in the same environment. 201 stainless steel coil In the field of narrow bands, the emergence of 201 stainless steel J3 can better meet the requirements of pipe manufacturers for corrosion resistance and deformation. Because it can reduce the cost of raw materials for pipe manufacturers, it is sought after by pipe manufacturers in the narrowband field. J3 material is easy to process in veneer, but not difficult. The master of the processing factory said that he used J3 material to bend the board, and there would be an inner seam after it was broken (for black titanium, color board series, sanding board, when it is broken apart, there will be an inner seam when folding). The material of the sink has been bent 90 degrees, and it will not work if it continues. J4: The material of J4 is a relatively high-end variety in the J series of 201 stainless steel. It is suitable for deep drawing products with small angles. Most of the products that need deep drawing and salt spray test will choose it. Such as sinks, kitchen utensils, bathroom products, kettles, thermos cups, door hinges, pots, etc.
Haynes 718 Alloy is a high-temperature, high-strength nickel-based alloy developed by Haynes International. It has excellent oxidation resistance, corrosion resistance, and high-temperature strength, and is widely used in high-temperature and high-pressure environments in aerospace, energy, chemical, petroleum, and natural gas industries. The chemical composition of Haynes 718 Alloy includes approximately 52% nickel, 19% chromium, 3% titanium, 5% aluminum, about 0.9% iron, and trace amounts of carbon, sulfur, phosphorus, copper, and tantalum. This combination of elements gives Haynes 718 Alloy its excellent high-temperature performance. In addition, Haynes 718 Alloy uses advanced heat treatment processes, which can further improve its high-temperature strength and oxidation resistance. Haynes 718 Alloy can be made into various shapes of products, such as sheets, rods, pipes, forgings, castings, and welding materials, etc. Its mechanical properties improve with increasing temperature, and it can maintain high strength and toughness at high temperatures ranging from 600�°C to 980�°C. In addition, Haynes 718 Alloy has excellent oxidation resistance and can withstand high-temperature oxidation environments for a long time. Haynes 718 alloy is an important nickel-based superalloy used in high-temperature applications such as gas turbine engines. Below are the standards for Haynes 718 alloy in various countries: United States: AMS 5596, AMS 5662, AMS 5663, AMS 5664, AMS 5832, AMS 5962, AMS 5665, AMS 5666, AMS 5667, AMS 5668, AMS 5669, AMS 5670, AMS 5671, AMS 5758, AMS 5759, AMS 5660, AMS 5661, AMS 5677, AMS 5909, AMS 5927, AMS 5947, AMS 5950, AMS 5963, AMS 5964, AMS 5966, AMS 5967, AMS 5968, AMS 5969, AMS 5970, AMS 5971, AMS 5972, AMS 5973, AMS 5974, AMS 5975, AMS 5976, AMS 5977, AMS 5978, AMS 5979, AMS 5980, AMS 5981, ASTM B637, ASTM B670, UNS N07718 Europe: EN 2.4668 Germany: DIN 17744, VdT�?V 718 France: AFNOR NC 19 Fe Nb United Kingdom: BS HR 201, BS HR 401, BS HR 501 Japan: JIS NW 0771 We can provide the following the form:Haynes 718 Alloy coil; Haynes 718 Alloy strip;Haynes 718 Alloy plate; Haynes 718 Alloy sheets; Haynes 718 Alloy tube; Haynes 718 Alloy pipe;Haynes 718 Alloy flat; Haynes 718 Alloy bar BS:HR 201/JIS:NC19FeNb/UNS:N07718/W.Nr:2.4669 Haynes 718 is a nickel-chromium alloy that is known for its high strength and excellent corrosion resistance. It is commonly used in a wide range of applications, including: Aerospace industry: Haynes 718 is widely used in the aerospace industry due to its high strength, excellent fatigue resistance, and good weldability. It is used for components such as gas turbine engine parts, thrust reversers, and exhaust systems.
Incoloy Alloy 907 is a high-strength, high-temperature alloy mainly composed of nickel, chromium, iron, molybdenum, niobium and other elements. It has excellent corrosion resistance, oxidation resistance and creep resistance, and is widely used in aviation, energy, chemical and other fields. The following is the detailed introduction of Incoloy Alloy 907: performance: Corrosion resistance: Incoloy Alloy 907 has good corrosion resistance in various environments such as acid, alkali and salt. Oxidation resistance: Incoloy Alloy 907 has good oxidation resistance at high temperature, and can resist oxidation, thermal corrosion and high temperature oxidation. Creep resistance: Incoloy Alloy 907 has good creep resistance under high temperature and high stress. Processability: Incoloy Alloy 907 can be processed by various processing methods, such as forging, heat treatment, cold working, hot rolling, etc. The international standard designations for Incoloy alloy 907 include UNS N19907 and W.Nr. 2.4663. There are also corresponding standards and specifications in different countries and regions, such as AMS and ASTM standards in the United States, EN standards in Europe, and JIS and JPI standards in Japan. Here are the specific standards and designations for Incoloy alloy 907 in different countries: United States: AMS 5541, AMS 5542, AMS 5544, AMS 5548, ASTM B366, ASTM B408, UNS N19907 Germany: DIN 17750, DIN 17752, DIN 17753, DIN 17754, W.Nr. 2.4663 United Kingdom: BS HR 505 Europe: EN 10095 Japan: JIS H4551, JPI-SB46 We can provide the follwoing the form:Incoloy alloy907 coil; Incoloy alloy907 strip;Incoloy alloy907 plate; Incoloy alloy907 sheets; Incoloy alloy907 tube; Incoloy alloy907 pipe;Incoloy alloy907 flat; Incoloy alloy907 bar BS:HR 505/JIS:NW4894/UNS:N19907/W.Nr:2.4669 Incoloy Alloy 907 is widely used in aviation, energy, chemical and other fields, such as: Heat treatment equipment and furnaces in high temperature oxidation environment Components of turbine engines and jet engines in aerospace Reactors, distillation towers and other components of chemical equipment Fuel elements in the nuclear industry, reactor internal structures, etc. It should be noted that when selecting and using Incoloy Alloy 907, it needs to be confirmed according to the specific situation and comply with local standards and regulations.
420 stainless steel is a kind of martensitic stainless steel, which has the characteristics of certain wear resistance and corrosion resistance, and high hardness. 420 stainless steel is a martensitic grade of stainless steel that contains chromium and molybdenum, making it corrosion-resistant and hardenable. It has good strength, hardness, and wear resistance, and is commonly used in applications where high strength and moderate corrosion resistance are required, such as in cutlery, surgical instruments, and dental equipment. Some of the key properties of 420 stainless steel include: Corrosion resistance: 420 has good corrosion resistance in mild atmospheric environments and in most mild chemical environments. Hardness: 420 is a hardenable stainless steel and can be hardened by heat treatment, making it ideal for applications where high hardness is required. Wear resistance: 420 has good wear resistance due to its high hardness. Machinability: 420 has moderate machinability in the annealed condition, but is more difficult to machine in the hardened condition. Some of the common applications for 420 stainless steel include: Cutlery, including knives, scissors, and blades Surgical instruments, such as scalpels and forceps Dental equipment, including dental drills and hand tools Valve parts Pump shafts and bearings Overall, 420 stainless steel is a reliable and versatile material that is well-suited for use in applications where high strength, hardness, and moderate corrosion resistance are required. Here are some of the most common international standards for 420 stainless steel: ASTM A276: Standard Specification for Stainless Steel Bars and Shapes ASTM A314: Standard Specification for Stainless Steel Billets and Bars for Forging ASTM A473: Standard Specification for Stainless Steel Forgings ASTM A580: Standard Specification for Stainless Steel Wire EN 10088-3: Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes JIS G4303: Stainless steel bars GB/T 1220: Stainless steel bars We can provide the following form:420 stainless steel coil; 420 stainless stee strip;420 stainless stee plate; 420 stainless steel sheets; 420 stainless steel tubes; 420 stainless steel pipe; 420 stainless steel flat; 420 stainless steel bar 420 stainless steel is suitable for all kinds of precision machinery, bearings, electrical appliances, equipment, instruments, meters, transportation tools, household appliances, etc. It is mostly used in the manufacture of parts resistant to atmosphere, water vapor, water and oxidative acid corrosion.
Inconel722 is an alloy composed of nickel as the base and other elements. It is a kind of nickel-chromium alloy, nickel-iron alloy, nickel-copper alloy and nickel-molybdenum alloy. Nickel has good mechanical, physical and chemical properties, adding appropriate elements can improve its oxidation resistance, corrosion resistance, high temperature strength and improve some physical properties. It has excellent corrosion resistance and oxidation resistance, has good tensile properties and fatigue properties from low temperature to 980 �°C, and is resistant to stress corrosion in salt spray atmosphere. Here are the standard grades and specifications for Inconel 722: American standard grade: UNS N07722 Specifications: AMS 5541: Standard specification for hot-rolled Inconel 722 plate, sheet, and strip. AMS 5714: Standard specification for Inconel 722 bars and forgings. ASTM B637: Standard specification for nickel alloy bars and forgings. ASME SB-637: Same as above. European standard grade: NiCr21Mo14W (2.4858) Specifications: EN 10095: Technical delivery conditions for hot rolled and forged stainless steel and heat-resisting steel and heat-resisting steel materials. EN 10269: Technical delivery conditions for high-temperature and corrosive environments. EN 10204: Standard specification for type, batch, and grade certificates for metal products. EN 10302: Technical delivery conditions for hot-rolled, forged, and cold-drawn nickel alloy bars. Japanese standard grade: - Specifications: JIS G4902, JIS G4903 Chinese standard grade: GH4220 Specifications: GB/T 14992: Standard specification for seamless and welded nickel alloy tubes. GB/T 14994: Standard specification for nickel alloy forgings. GB/T 12771: Standard specification for seamless steel tubes and welded steel tubes for hydraulic transmission. These specifications define the chemical composition, physical properties, processing, and testing requirements for Inconel 722 materials to ensure that their quality and performance meet the requirements. We can provide the following the form:Inconel722 alloy coil; Inconel722 alloy strip;Inconel722alloy plate; Inconel722 alloy sheets; Inconel722alloy tube; Inconel722 alloy pipe;Inconel722 alloy flat; Inconel722 alloy bar EN:NiCr21Mo14W;JIS:G4902;UNS:N07722;W.Nr:2.4858 1. Heat treatment industry. Such as furnace rollers, bell furnaces and annealing furnaces. 2. Calciner. For example, it can be used to calcinate high-performance corundum, calcinate chromite to produce ferrochrome alloy, and recover nickel used as a catalyst in petrochemical industry. 3. Chemical industry and petrochemical industry, use it to prepare new steam cracking naphtha furnace to produce hydrogen, etc. 4. Automatic device. Such as catalytic support system, spark plug. 5. Cleaning equipment for nuclear industry, such as nuclear waste removal. 6. Steel industry. Such as direct reduction of iron ore process to produce sponge titanium
The aqueous solution of hydrogen fluoride gas is a clear, colorless, fuming corrosive liquid with a strong pungent odor, easily soluble in water and ethanol, and slightly soluble in ether. Hydrofluoric acid is a weak acid with strong corrosiveness, which can strongly corrode metal, glass and silicon-containing objects. It is generally produced in laboratories with fluorite (mainly composed of calcium fluoride) and concentrated sulfuric acid. It needs sealed in a plastic bottle. The chemical industry is used to produce organic and inorganic fluorides (such as potassium fluoride, magnesium fluoride, uranium hexafluoride, calcium fluoride helium, fluororesin, fluoroplastic, fluororubber), dye synthesis, organic synthesis catalyst, and flame-retardant agent etc. In glass processing and production, it is used for frosted bulbs and general bulb treatment, glassware polishing, glass instrument scales, glassware and mirror engraving and lettering. As a cleaning agent for pickling of metal surfaces such as stainless steel. Used in the atomic energy industry, for the production of elemental fluorine and fluorides, and also as catalysts and fluorinating agents.
- Product name: Ethyl Alcohol(Ethanol) - CAS number: 64-17-5 - C2H6O - Purity: Ethanol 99.9%. 96% - Property: colourless transparent liquid - Medical Grade - Packing: DRUM (13.04mt/80drums/ 20' FCL) - ISO tank(19mt/tank) - Certifectes : COA, MSDS - Applicable for production of sanitizer, acetaldehyde, ethylene diene, ethylamine, ethyl acetate, acetic acid, ethyl chloride, etc., - Shipping : Can ship promptly to middle east/GCC/USA - Payment: T/T in advance - L/C at sight - MQO: 1 ISO tank / 1 FCL
Available Size :- 100 g If you want to start your day with something that is truly unique go grab a pack of Meswak today. It is made from pure extract of rare Miswak herb which grows slowly, resisting the brutal forces of nature amidst the sand dunes of Africa and South Asia. Even a small portion of this herb is capable of providing Complete Oral Care to you. The ingredients of Miswak herb truly make Meswak unique. It has Resins that form a layer over the enamel - protecting against caries; Silica which removes stains; Alkaloids exert a bactericidal effect and stimulatory action on gingival, Essential oils stimulate the flow of saliva which works as an antiseptic, Vitamin C helps in healing and repair of tissues, etc. The best part of this unique toothpaste is the amazing mouthfeel it leaves behind, which lasts the whole day. What's more, It is also non-fluoride toothpaste which makes it different from 80% of the regular toothpaste that is on the market today. Hence it is a smarter option as excess fluoride can lead to dental fluorosis. So, choose well for your family.
Product Name: Perfluorobutanesulfonyl Fluoride CAS No: 375-72-4 Molecular Formula: C4F10O2S Molecular Weight: 302.09 Molecular Structure: Appearance: Colorless transparent liquid purity: 99%min Application 1.For the synthesis of fluorocarbon surfactants, fluor pesticides, dyes, polycarbonate processing dispersants, etc. 2.Antibacterial synergist.
Top Quality Nh4cl 99.5% Min Ammonium Chloride Salt Amonium Cloride Ammonium Chloride Salt is White powdered crystals, specific gravity 1.532(17 �°C ) easily absords moisture, and forming a cake,soluble in water, and the solubility varies as the temperature increases, sulbimes at 340 �°C. It appears little corrosivity. Benzalkonium chloride is a quaternary ammonium compound, which has good antibacterial effect on bacteria, yeast and fungi. Benzalkonium chloride is a pharmaceutical excipient, commonly used in ophthalmic preparations, and is a highly effective antibacterial preservative. The product is colorless to light yellow transparent liquid or white powder, which is a disinfectant and preservative. Benzalkonium chloride dissociates into cationic active groups in aqueous solution, which has cleaning and bactericidal effects. It is widely used in sterilization, disinfection, anti corrosion, etc., and it is also a leveling agent for cationic dyeing and finishing fibers. Project Benzalkonium chloride (99%) Benzalkonium chloride (80%) Benzalkonium chloride (50%) Benzalkonium chloride (44%) Exterior White powder Colorless transparent liquid Colorless transparent liquid Colorless transparent liquid Content >98% >80% >50% >44% PH (1%) 6-8 6-8 6-8 6-8 Odor No obvious irritating smell Light bitter almond Light bitter almond Light bitter almond 1.It has a broad-spectrum, high-efficiency bactericidal and algae-killing ability, and has special effects on killing sulfate-reducing bacteria. 2.Soluble in water, easy to use, not affected by water hardness, and has a strong slime stripping effect. 3.No residue will not cause secondary pollution. 4.For systems that cannot be controlled by chlorine gas, this series of products can effectively control the growth of algae and slime. 5.It has the functions of dispersion and penetration, can penetrate and remove slime and peel off the attached algae, and has the ability to remove oil, and also has the effect of cleaning oil stains. 6.Strong adaptability: Benzalkonium chloride fungicide is effective in sterilizing and killing algae in different PH ranges, that is, it can be used under both acidic and alkaline conditions.
Used in the production of acetylene gas, polyvinyl chloride, lime nitrogen, dicyandiamide, iron and steel desulfurizer, etc., used in electronics industry, teaching reagents. Calcium carbide is used for chemical production accounts for about 60%, and the remaining 40% is used for metal welding and cutting. Using calcium carbide as raw material can produce a series of chemical products, such as PVC resin, polyvinyl alcohol, vinyl acetate, neoprene rubber, butanol, octanol, tricyanoethylene, tetracyanoethylene, acetaldehyde, acetylene carbon black, lime nitrogen, etc.