Automotive Fuel Diesel Suppliers and Manufacturers

We can supply Diesel en590 10ppm with very good price. Not necessary to follow seller process, seller will follow buyer own procedure. If you want we can immediately arrange a meeting with End seller Only for serious buyer

PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS.

PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS.

Origin: Kazakhstan MOQ: 50,000 MT/mth x 12 mths Max. Quantity: 900,000 MT/mth x 12 mths

Diesel Gasoil EN-590 10PPM is a premium-grade diesel fuel that meets the stringent European Union standards for quality and environmental performance. With a maximum sulfur content of 10 parts per million (PPM), this ultra-low sulfur diesel (ULSD) offers exceptional cleanliness and efficiency, making it an ideal choice for modern diesel engines. Key Features: Ultra-Low Sulfur Content: Contains only 10 parts per million of sulfur, ensuring reduced emissions and enhanced environmental sustainability. High Energy Density: Provides superior energy density, resulting in improved fuel efficiency and engine performance. Engine Compatibility: Compatible with a wide range of diesel engines, including modern high-pressure common rail (HPCR) systems, ensuring optimal performance and reliability. Enhanced Lubricity: Formulated with additives to enhance lubricity, protecting critical engine components and prolonging engine life. Cold Weather Performance: Engineered to perform well even in cold weather conditions, with excellent cold flow properties for reliable starting and smooth operation in sub-zero temperatures. Benefits: Environmental Sustainability: By significantly reducing sulfur emissions, Diesel Gasoil EN-590 10PPM helps mitigate air pollution and minimize environmental impact, contributing to a cleaner and healthier environment. Improved Engine Performance: With its clean-burning properties and high energy density, this diesel fuel ensures optimal combustion, resulting in increased power output, reduced fuel consumption, and lower maintenance costs. Compliance with Regulations: Meets the strict quality standards set forth by the European Union for diesel fuel, ensuring compliance with regulatory requirements and avoiding costly penalties. Versatility: Suitable for a wide range of applications, including transportation, industrial, agricultural, and commercial use, providing versatility and reliability across various industries. Target Audience: Transportation Companies: Ideal for trucking companies, logistics providers, and fleet operators seeking to optimize fuel efficiency and minimize emissions in their diesel-powered vehicles. Industrial Users: Suitable for use in generators, machinery, and equipment in various industrial settings, offering reliable performance and compliance with environmental regulations. Commercial Businesses: Suitable for use in commercial vehicles, construction equipment, and agricultural machinery, providing dependable fueling solutions for daily operations. Make the Switch to Diesel Gasoil EN-590 10PPM and Experience Cleaner, More Efficient Diesel Power!

Virgin Oil D6, also known as residual fuel oil, is a petroleum product that is obtained from the refining process. It has a high density and a high viscosity, making it a suitable heavy fuel oil used in large marine engines and power plants that require high levels of energy. Virgin Oil D6 is produced from the residue left over after the lighter hydrocarbons, such as gasoline and diesel fuel, are removed from crude oil. It is a heavy, black viscous liquid that is resistant to flow. The product has a high sulfur content, typically between 2.5% and 4%, and a calorific value of approximately 38 MJ/kg.

We supply Diesel Fuel 100 ppm EN 590 on FOB and CIF Incoterms. FOB available from Rotterdam, Houston, and Fujairah. Occasionally we have spot deals. PRODUCT ORIGIN: Kazakhstan Contract directly with the Refinery. Send us an LOI to info@odissiglobal.com The EN 590 standard is the European diesel fuel specification for low sulphur content diesel and describes the properties diesel fuel must meet if it is to be used in automobiles. This specification of diesel is the grade required by a diesel-engine road vehicle (DERV) and the majority of agricultural machinery.

Diesel Exhaust Fluid (DEF) is a solution of urea and water that's injected into the exhaust stream of diesel vehicles to turn NOx gases (harmful emissions) into nitrogen and water. This system is called a Selective Catalytic Reduction (SCR) implemented by vehicle manufacturers to meet EPA emissions standards in 2010.

L/C ,DLC, SBLC payment is accepted, NO upfront, pre-payment. Minimum Order Quantity is 100k/mt if spot. We are one of the most precise on non-sanctioned supply due to strict requests of our clients. We are in direct colloboration with reputable sellers,resellers,retailers,manufacturers and also well known refineries within our portfolio. Both as buyer and seller according to the necessarities in our partnerships.

EN590 Diesel (10PPM) ULSD (Ultra Low Sulfur Diesel) is a premium diesel fuel that conforms to the European standard EN590, with an ultra-low sulfur content of only 10 parts per million (PPM). This type of diesel is known for its environmental benefits and is widely used in modern diesel engines.

Hallo Good Day we can offer EN 590 10 ppm and Jet fuel from trusty refinery which we already dealing Kazak and Qatar Origin available Only genuine buyers please - prefer mandates/ intermediates who knows the buyer well with previous succesful transactions Aaiting your reply

Hallo Good day we supplying Jet Fuel A 1 and EN 590 10 PPM - Origin Kazhakstan and other Non sanctioned Countries Very genuine refinery - we have on going contracts - Long chain brokers please dont contact unless have direct contact with END buyer or Buyer Mandate - Need ICPO from direct buyer to refinery we assure best price and mark up ( conditional ) we can provide TTV, TTT, TTO , CIF , FOB

CIF EN-590 10ppm Diesel -12 Month Contract Production Procedures: Please Note: I'm direct to the seller of a billion dollar global trading company who specializes in gas and grains trading. We have impeccable due diligence and a successful 40 year track record. (We have our own refinery in Kazakhstan) Product: EN590 Diesel 10ppm Origin: Kazakhstan - (Our own refinery) Delivery: CIF to any safe world port MOQ: 25mt Quantity & Fixed Pricing: 25mt= $640 50mt= $635 100mt=$630 Commission: $5 per MT starts with you. (sell side closed) CIF Transaction Procedures: 1. Buyer issues LOI/ICPO. 2. Seller issues Draft Sales Purchase Agreement Contract and for Buyer's review and signing. 3. Buyer and Seller sign Sales Purchase Agreement Contract and the Buyer will send Draft Banking instrument verbiage for review. 4. Seller sends partial POP to Buyer via email: (a) Statement of Availability of Product (b) Seller's Irrevocable Commitment to Supply (c) Product Passport (d) Certificate of Product Origin (e) ATSC (Authorization to Sell and Collect) 5. Buyer sends the Final Draft of LC/SBLC for Sellerâ??s approval. 6. Buyer's Bank Swift the irrevocable, operative, transferable, divisible, confirmed and fully Funded Documentary Letter of Credit IRDLC to the Seller's bank. 7. Seller sends the full POP and 2% Performance Bond to Buyer's bank. 8. Shipment commences as scheduled in the contract and upon arrival of the cargo at the discharge port and after SGS/Q&Q, or equivalent inspection, immediately Buyer's Bank releases the Total Value of the Shipping to Seller's Bank within 48 hours (two banking days) by MT103 against shipping documents specified. 9. Seller pays all intermediaries involved in the transaction as per IMFPA within 48 hours. Notes: 1) Seller will allow transferable sblc/dlc and non-transferable sblc/dlc as a finance instrument. 2) Buyer must submit Loi/icpo to start engagement with our seller. 3) No brokers please. Only direct buyers or direct buyer reps.

We deals in petroleum and petrochemical products currently available for supply from Kazakhstan, Europe & Qatar. We handle worldwide supplies from our direct selling Refinery to AWSP on CIF/FOB. The listed products are available on CIF/FOB and we follow standards procedure selling Refinery: JP54, JETFUEL A1, VIRGIN OIL D6, D2, MAZUT, LNG, EN590-10PPM, BASE OIL, PET COKE, LNG & LPG etc Payment Terms: 100% SBLC/LC/DLC Origin: Kazakhstan, Europe, Qatar Contact us for more details. Thanks AWF Global Trading Company Limited.

Hello dear Buyers !!! My name is Semyon, and I'm a top manager of Rosneft. We are pleased to offer you EN590 10PPM diesel fuel and Jet A-1 aviation kerosene on favorable terms. We allocate volumes for petroleum products and can offer non-sanctioned fuel options. Our prices are as follows: - FOB Novorossiysk 560 $ per metric ton. FOB Rotterdam - EN590 10PPM - $610 per metric ton FOB Rotterdam - Jet A-1 - $85 per barrel. To start cooperation, please send to my mail: LOI, bank account statement, CIS. Contact us to discuss the details and get more information: **Phone**: â?ª+353 83 029 8771â?¬

DIESEL EN590 500PPM,,, Dip and Pay as FOB as Ship To Ship only, from Russia, Kazakhstan Only for RWA Buyers.. Price: $450 / MT as Dip and Pay .. Quantity per Vessel is from 50,000 - 30,0000 MT / Vessel... Procedures is very simple, easy and clear: ICPO --> Seller send CI to Buyer to sign ---> against CI ---> Dip test and Injection products ---> Payment... Please contacting through RWA buyers only.