We can offer you Anthracite Coal with any specification. It can be a long term contracts on an annual basis if desired. There are no intermediaries and we work directly with the end Seller. Anthracite Coal is also known as a hard coal and black coal, is a hard, compact variety of coal that has a sub metallic luster. It has the highest carbon content, the fewest impurities, and the highest energy density of all types of coal and is the highest ranking of coals. The use of anthracite coal in steam power plants is classified as High Grade and Ultra High Grade coal. As one of the most brittle kinds of coal, anthracite is the perfect resource to use for the generation of heat for an extended amount of time. We can offer a quantity of 30,000m/t per month X 12 months or greater. If interested please advise
Anthracite filter used for water treatment. filtration media anthracite.
Fine Antrhracite 0-25mm Fixed Coal (ASTM D3172-13)Â 79% MIN Ash (ASTMÂ D3174-12)Â Â Â Â Â Â Â 16% MAX VM (ASTM D3175-17)Â Â Â Â Â Â Â Â 5% MAX Sulphur (ASTM D4239-17)Â Â Â Â 0.8% MAX GCV (ASTM D5865-13)Â Â Â Â Â Â 6600 Kcal/Kg MIN. N (ASTM D5373-16)Â Â Â Â Â Â Â Â 0.76% MAX H (ASTM D5373-16)Â Â Â Â Â Â Â Â 1.6% MAX Moisture (ASTM D3302-17)Â Â Â 10% MAX
Anthracite, often referred to as hard coal, is a hard, compact variety of coal that has a submetallic luster. It has the highest carbon content, the fewest impurities, and the highest energy density of all types of coal and is the highest ranking of coals Origins: indonesia,vietnam,russia,peru,ukraine
High Carbon, Low Moisture & Low Volatile Anthracite Coal. Origin:USA We can supply 50k - 60K MT Per Month on FOB basis. Typical Quality: Vol. (Dry). 4.5 to 6% Ash (Dry). 9.5 to 11% Fixed Carbon 82.5 to 86% Sulfur (Dry). 0.75% BTU /lb. (Dry) 13,600 Moisture (AR). 0.3% Size: 4.75 to 89 mm . If interested in Anthracite coal ,please advise to buyer size requirements and we shall follow up with more information along with COA.
Anthracite coals Brand name: ash (ã�â�ã�â¨) Size: 0-6 Ash (a, %): 16-19 Moisture (w, %): 7.8 Sulphur (s, %): 1.0 - 1.5 Calorific (kkal/ hr) : 6000 - 6300 Vm (%): 3.5 Delivery: in bulk Price fob: nikolayev or ilichevsk, ukraine: usd 118.00 per metric tonn. Min order 25, 000 mts (try less), in bulk.
Specifications: Sl.No Parameters Guaranteed Limit (1) Total Moisture < 5% (2) Proximate analysis Volatile matter 9- 12% Ash 4-6% Inherent moisture < 2 % (3) Ash Fusion temperature Initial deformation temperature Deg. Celcius min. 1200 Hemispherical temperature Deg. Celcius min. 1340 Flow temperature Deg. Celcius min. 1360 (4) Gross Calorific Value Kcal/kg 7850-8200 (5) Hard Grove Grindability Index (HGI) 76 (6) Sulphur 0.2 to 0.5 (7) Oxygen 1.86% (8) Phosphorus 0.05-0.1 (9) Alkali (K2O+Na2O) As on Ash basis 0.42% & 0.88% (10) Size 30 to 80 mm (+) 80 mm (+) 100 mm (11) Fixed carbon 82-88%. 5000 MT to 15000 MT.
Moisture 10 % Max Volatile Matter % (on dry basis) 10 % Max Ash % (on dry basis) 10 % Max
Exporter and Trader of Anthracite Coal, Anthracite Filter Media, Filter Anthracite
Specifications: Total Moisture 6 % max, Ash (db) 6 % max, Volatile matter (db) 3 % max, Total Sulphur (db) 1 % max, Gross Calorific Value (db) 7700 kcal/kg, Net Calorific Value (db) 7600 kcal/kg, Fixed Carbon 88 % min, Phosphorus 0.02 % max. Size: 25-100 mm
Specifications: Moisture 2 % max, Ash 6 % max, Volatile matter 3.5 % max, Total Sulphur 1 % max, Calorific Value 6500 kcal/kg, Fixed Carbon 90 % min. Packing: in big bags, with PE inlay of 10 kg, 500 kg or 1000 kg as per customer request Size: 0-3 mm, 1-3 mm, 3-8 mm
Anthracite coal with FC above 82 and GCV >7.200 kcal/kg
In the metal's smelting and fabrication industries, anthracite is commonly used as a reduction agent for various applications such as briquetting charcoal, iron ore pellets and other uses.
Ningxia biyuan activated carbon co., ltd. Sells carbon additive for sale anthracite coal for metallurgy carbon additive carbon, which is finished by series production process. The appearance of black, granular, with developed pores, good adsorption properties, high strength, economic advantages, product features and application range: high fixed carbon content, low sulfur content, stable oil effect, high carbon absorption rate, degree of graphitization the best is to increase the nucleation of molten iron, which is mainly used for smelting cast steel and cast iron. Ningxia biyuan activated carbon co., ltd. Is a professional manufacturer and has about eight years of different filter media production and domestic historical trade. Now we are committed to developing our international trade. We adhere to the principle of "integrity management, quality service". Our employees are professional and sincere, and our prices are fair. Look forward to working with you.
Ash : 10% - 11% Volatile Matter : around 2.5% Fixed Carbon : 86% Sulphur : 0.6% Calorific Value : 7135 (Kcal/kg) These are the basic details. Feel free to contact us for more information. Thank you.
Coal mine for sale. The reserve is comprised of an estimated 70 million tons of in ground semi-anthracite coal, under just over 10,000 acres, bordered on the north by the Arkansas River This is probably the largest known mine in the U.S. and it has never been mined. Because of semi-anthracite's high fixed carbon content, elsewhere it has found its greatest use for Pulverized Coal Injection (PCI) in which the coal is injected into a blast furnace to substitute for a portion of the significantly more expensive coke. The expected average assay of the coal is as follows: 1) Ash: 6 to 9%; 2) Moisture: 60. With conventional preparation, this coal should be acceptable in the PCI market. If, however, this coal is processed through a special proprietary refinery, the assay of the coal is projected to be as follows (with a strong tendency to be the better number in each case): 1) Ash: 2.2 to 7.6%; 2) Moisture: 1 to 3%; 3) Volatile Matter: 9 to 11%; 4) Sulfur: 0.6 to 0.8% 5) Heating Value: 12,500 to 13,500 BTU/lb; 6) Fixed Carbon 80 to 90%; 7)
WE PROUDLY OFFERING Anthracite Coal NCV 6,800 kcal/kg FOB Price : $235 Grade Type : NCV 6.000 Specification : Total Moisture : Max 9% Inherent Moisture : Max 4% Ash Content : Max 11% Volatile Matter : 10-15% FIxed Carbon : 35-50% Total Sulfur : Max 1.3% Hard Grove Index : 45-65 Size : 0 - 50 MM Terms : FOB Mother Vessel, can arrange CFR as per request Additional Freight Cost : $15, and $35, and around $45, and $65 ( ESTIMATE FREIGT COST ) MQQ : 50.000 MT Supplying Ability of Quantity : 50.000 MT to 500.000 MT Packaging : Bulk Mother Vessel Laycan : 25 - 35 Days After Sign Contract Purchase Order and LC Actice Loading Rate : By Seller expenses at Loading Port Unloading Rate : By Buyer expenses at Discharge Port Payment Terms : 100% at sights port loading LC MT700 PBG : 5% PB after LC Active and Confirmed by Beneficiary Bank
Ningxia Huiheng activated carbon Sales Co. Ltd. Anthracite under the conditions of isolated air, heated to 950-1050 DEG C, after drying, pyrolysis, melting, bonding, solidification, shrinkage and other stages and then made coke, this process is called high temperature coking (high temperature carbonization). Coke obtained from high temperature coking for blast furnace smelting, casting and gasification. In addition to a large number of coke used in iron smelting and non-ferrous metal smelting (metallurgical coke), but also for casting, chemical, calcium carbide and iron alloy, the quality requirements are different. Due to its high mechanical strength, porous structure, good adsorption performance, strong ability to cut pollution, fast filtration speed, long service life and so on. The utility model is suitable for domestic water and industrial water treatment devices. 1.High mechanical strength, broken rate and wear rate of less than 2% (percent by mass). 2. Fixed carbon is greater than 80%, mud content is less than 1.5, the use of long cycle. 3. Product appearance of good gloss, moisture is less than 2.5%, porosity greater than 75%, filtration speed. 4. Chemical stability, non-toxic substances. In the general acidic, alkaline, neutral water are not dissolved. 5. Particles uniform, large gap, low resistance, porous structure is reasonable, good adsorption performance, strong ability to intercept sewage.
Barite for oil drilling, coal bituminous, anthracite coal.
Coal like anthracite steam and thermal coal.