We have top quality drained acid car batteries scrap for sale at desirable quantities and at very good negotiable prices. We ship to all destinations. contact now with your email address so that we can send you more details directly. Drained battery scrap (free of battery acid/fluid) including lead plates and plastic/rubber casing complete with caps. Purity : Complete Battery with full contents, except the liquid Car batteries are treated as hazardous waste. Drained / Dry Whole Intact Lead Batteries (RAINS) Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS) SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES : To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable. Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS) 6V1.3AH sealed lead acid battery. 1/Product Specification: Item No.:DHB613; Voltage:6V; Normal capacity:1.3AH/20hr; Dimension(L*W*H):97*24*52mm; Total height(with terminal):57mm; Weight:0.30kg; 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability. (5)No pollution and no harm.
We have top quality drained acid car batteries scrap for sale at desirable quantities and at very good negotiable prices. We ship to all destinations. contact now with your email address so that we can send you more details directly. Drained battery scrap (free of battery acid/fluid) including lead plates and plastic/rubber casing complete with caps. Purity : Complete Battery with full contents, except the liquid Car batteries are treated as hazardous waste. Drained / Dry Whole Intact Lead Batteries (RAINS) Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS) SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES : To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable. Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS) 6V1.3AH sealed lead acid battery. 1/Product Specification: Item No.:DHB613; Voltage:6V; Normal capacity:1.3AH/20hr; Dimension(L*W*H):97*24*52mm; Total height(with terminal):57mm; Weight:0.30kg; 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability. (5)No pollution and no harm.
The production company has been on the market since 2012. The main direction of the company: the production of peas, green buckwheat, lentils, green plate of 5 plus caliber. All products pass petcus and color sorter. Our products are gluten-free. Green buckwheat is produced exclusively from naturally dried raw materials, our technologists carefully select raw materials without gluten grains. We can also offer gluten-free broken green buckwheat. Split peas: productivity of 1000 tons/month. Lentils: productivity of 1000 tons/month. Packing is performed at the request of the client. We can also offer crops such as: buckwheat, whole raw peas, rapeseed, flax, barley, oats, wheat, soy. The company " is in the register of exporters to China. We offer to work transparently and honestly on pre-agreed terms, the registration number of our company as an exporter in the The Federal Service for Veterinary and Phytosanitary Supervisi You can find out all the details by contacting us, we will calculate the delivery to your port. Our products are grown in pristine places of the Altai Territory, which is famous for its cleanest ecology. Therefore, our products are environmentally friendly, do not contain GMOs and have the highest percentage of germination of 99.99%. Our organization has established itself as a responsible company that is attentive to the wishes of its customers. We constantly monitor prices and product range, which allows our partners to save not only their own money.
5052 aluminum plate is an AL-Mg alloy aluminum plate, which combines the advantages of 3 series anti-rust aluminum and the excellent formability of 5 series. It has moderate strength, especially fatigue resistance: high plasticity and corrosion resistance, cannot be strengthened by heat treatment, and is durable. Good corrosion, good weldability, poor machinability, can be polished. Application areas: transportation vehicles, ship sheet metal parts, aircraft fuel tanks, etc. 5083 aluminum plate belongs to the Al-Mg series alloy and is widely used. Especially in the construction industry, this alloy is inseparable and it is a promising alloy. It has good corrosion resistance, excellent weldability, good cold workability, and medium strength. Application fields: ships, automobiles, aircraft welding parts, subway and light rail, etc. 5754 aluminum coil is a typical aluminum plate among Al-Mg alloys. It has the characteristics of medium strength, good corrosion resistance, weldability and easy processing and forming. Application areas: automobile manufacturing industry, doors, bodies, seals, etc. 5182 aluminum plate has good corrosion resistance, excellent weldability, good cold workability, and medium strength. Application areas: automobile body panels, control panels, reinforcements, automobile fuel tanks, electrical appliance casings, etc. Status: O, H32, H34, H36, H38, H111, H112 Surface treatment: smooth aluminum, mirror, patterned aluminum plate Packaging and transportation: simple packaging, refined packaging, logistics packaging, foreign trade shipping packaging (fumigated wooden pallet optional) Please contact us for specific parameters and we will give you a detailed quotation.
Compostable Sugarcane / Bagasse 9 Plate 3 Compartment 500/Case Additional information Weight 23.45 lbs Dimensions 13 x13 x 8 in Quantity 500/case Color White Shape Round Top Diameter 9 Inches
The copper sheet is a highly malleable and workable metal with outstanding electrical and thermal conductivity and corrosion resistance Origin: China Manufactured to Customer Specification: Thickness 0.080 - 0.500 mm
1401 Basmati Rice is characterized by its long, slender grains, which contribute to its premium quality and elegant appearance on the plate. With an impressive grain length, 1401 Basmati Rice stands out for its uniformity and consistency, ensuring a visually appealing presentation. Widely preferred by chefs and home cooks. Specifications: Long and slender grains Fragrant aroma Delicate texture when cooked Uniform grain length
Silicon wafer scrap.
Surplus ic and silicon wafers.
Reinforced silicone tube.
Key Specifications/ Special Features: Product Information 1)Polyester staple fiber/PES fiber/PSF/Hollow fiber Color: black, white, green, blue, red, beige, yellow and so on Denier:0.9D 1.4D 3D 6D 7D 12D 15D 20D 35D 40D 60D 70D Length: 8mm 25mm 28mm 32mm 38mm 45mm 51mm 64mm 75mm 102mm a)solid,hollow,hollow conjugated b)2.5-25D X 22-76MM c) Non-siliconized and siliconized d) COLOR: White ,Green ,Brown e)Weight :About 270kgs per bales
Cast iron scrap, such as columns, pipes, plates, and/or castings of miscellaneous nature, but free from stove plates, brake shoes, and burnt scrap. Must be cupola size, not over 24 x 30 inches in dimension and no piece to weight over 150 pounds. Must be free from foreign material.
Commodity 1 provides beryllium directly from the mine site to the global market. There are no middlemen involved, only our staff on the ground. We strive to organize smooth and transparent transactions. We believe in building long-term relationships with our customers. Beryl Composition Analysis Element Approximate Percentage Range Beryllium (Be) 0.1% 3% or less Aluminum (Al) 10% 25% or more Silicon (Si) 10% 30% or more Iron (Fe) 0.1% 2% Manganese (Mn) Trace a few percent Lithium (Li) Trace few tenths of a percent Sodium (Na) Trace less than 1% Potassium (K) Trace less than 1% Calcium (Ca) 0.1% 1% Magnesium (Mg) 0.1% 1% Tin (Sn) Trace below 0.1% Fluorine (F) Varies, can be 7% 8% or higher (in emeralds) Phosphorus (P) Trace below 0.1% Sulfur (S) Trace below 0.1%
Specialty metal products: titanium, stainless steel, and copper manufactured products, bars, pipe, tubular, sheet, plate, coils, etc. scrap metal: used rails, and copper mill berry & cathode. crude oil, gas & fuel products: en590, jet fuel, ago, bonny light crude oil, gasoline, espo, d6, d2, petcoke, etc. food products: sugar, soybeans, wheat, etc. fertilizers: urea and dap ore & minerals: lithium.
Specification 1)Polyester staple fiber/PES fiber/PSF/Hollow fiber Color: black, white, green, blue, red, beige, yellow and so on Denier:0.9D 1.4D 3D 6D 7D 12D 15D 20D 35D 40D 60D 70D Length: 8mm 25mm 28mm 32mm 38mm 45mm 51mm 64mm 75mm 102mm a)solid,hollow,hollow conjugated b)2.5-25D X 22-76MM c) Non-siliconized and siliconized d) COLOR:White,Green,Brown e)Weight:About 270kgs per bales 2)Viscose fiber specification: Viscose staple fiber is natural, renewable, environmentally green cellulose fiber, with strong vitality. A wide range of uses include; spinning, weaving, garden machines, non-woven fabrics, as well as other fields. Our 100% viscose staple fiber is available in bright, semi-extinction, high white, high strength short as well as various lengths. PERFORMANCE INDEX: Viscose Staple Fiber Liner density:1.2Dto 3D Fiber length:32mmto 64mm Dry Breaking Strength:â?¥2.00cn /dtex Wet Breaking Strength:â?¥1.10cn/dtex Dry elongation:20.0�±3.0% Viscose Filament Yarn Specification:1.33.3dtex/t30f Dry Breaking Strength:â?¥1.75cn /dtex Wet Breaking Strength:â?¥0.80cn/dtex Dry elongation:16%-25% 3)Acrylic Staple Fiber Color Finess:0.8D/1.2D/1.5D/2D/2.5D/3D/6D/8D Color Length:38mm~102mm 4)Raw cotton fiber We are mainly in charge of differentiation fiber. Will provide you the best quality & competitive price, as well as the excellent service!!! Specification: Denier: 1.2D-20D Length: 38-102MM Feature: -Looks like lmitation cotton in appearance. -Same as imitation cotton in performance. -Same as imitation cotton in fuctions. -It is close to the look and feel of cotton fabrics. 5)Cotton comber noil Appearance: Bright White. Moisture: 08 per cent Max. Staple Length: 18-22 mm
1)Polyester staple fiber/PES fiber/PSF/Hollow fiber Color: black, white, green, blue, red, beige, yellow and so on Denier:0.9D 1.4D 3D 6D 7D 12D 15D 20D 35D 40D 60D 70D Length: 8mm 25mm 28mm 32mm 38mm 45mm 51mm 64mm 75mm 102mm a)solid,hollow,hollow conjugated b)2.5-25D X 22-76MM c) Non-siliconized and siliconized d) COLOR:White,Green,Brown e)Weight:About 270kgs per bales 2)Viscose fiber specification: Viscose staple fiber is natural, renewable, environmentally green cellulose fiber, with strong vitality. A wide range of uses include; spinning, weaving, garden machines, non-woven fabrics, as well as other fields. Our 100% viscose staple fiber is available in bright, semi-extinction, high white, high strength short as well as various lengths. PERFORMANCE INDEX: Viscose Staple Fiber Liner density:1.2Dto 3D Fiber length:32mmto 64mm Dry Breaking Strength:â?¥2.00cn /dtex Wet Breaking Strength:â?¥1.10cn/dtex Dry elongation:20.0�±3.0% Viscose Filament Yarn Specification:1.33.3dtex/t30f Dry Breaking Strength:â?¥1.75cn /dtex Wet Breaking Strength:â?¥0.80cn/dtex Dry elongation:16%-25% 3)Acrylic Staple Fiber Color Finess:0.8D/1.2D/1.5D/2D/2.5D/3D/6D/8D Color Length:38mm~102mm 4)Raw cotton fiber We are mainly in charge of differentiation fiber. Will provide you the best quality & competitive price, as well as the excellent service!!! Specification: Denier: 1.2D-20D Length: 38-102MM Feature: -Looks like lmitation cotton in appearance. -Same as imitation cotton in performance. -Same as imitation cotton in functions. -It is close to the look and feel of cotton fabrics.
Commodity 1 has competitive prices for ilmenite sand. Most often, we have the best prices available in the marketplace.. Commodity 1 provides these products directly from the mines to the global market. There are no middlemen involved, only our staff on the ground. The origin of our ilmenite sand is Nigeria, which has a total reserve estimated to be between 200 and 240 million tons and is one of the largest ilmenite producers in the world. These ilmenite deposits are usually found in beach sand and deposits. Ilmenite is a source of titanium dioxide, a white pigment used in various products, including paints, plastics, paper, and food. Titanium dioxide is also used to manufacture sunscreen and other personal care products. Commodity 1 has a team of experienced in-house professionals who strive to organize smooth and transparent transactions. We believe in building long-term relationships with our customers. PACKAGING & DELIVERY Packaging Details: Dried, Bulk, Powder, Sand Port: Lagos Apapa Port, Nigeria Bags: 50 kg Container: 20 ft Lead time: Quantity (metric tons) 25MT/Month 1000MT/Month (Lead days) 30 Days 30 Days COMPOSITION ANALYSIS OF AVAILABLE ILMENITE Element % by wt. Iron 47.5 Titanium 34.5 Silicon 3.5 Aluminum 2.5 Manganese 0.5 Other 1 Total: 100 Other elements that may be present in ilmenite in small amounts include calcium (Ca), aluminum (Al), silicon (Si), and sulfur (S). The composition of ilmenite can vary depending on its source. For example, ilmenite from beach sands tends to be richer in titanium than hard rock deposits.
Commodity 1 provides Manganese ore directly from the mine site to the global market. There are no middlemen involved, only our staff on the ground. We strive to organize smooth and transparent transactions. We believe in building long-term relationships with our customers. We aim to be our customers Manganese ore supplier. We offer the best prices for our buyers. PACKAGING & DELIVERY Packaging Details: LUMS/Chips Port: Lagos Apapa Port, Nigeria Bags: 50 kg Container: 20 ft Lead time: Quantity (metric tons) 20 MT/Month 1000MT/Month (Lead days) 30 Days 30 Days A shipload of Manganese is available every four months. CHEMICAL COMPOSITION ANALYSIS OF MANGANESE ORE Element Percentage Manganese 40.20% Iron 24.10% Silicon 15.00% Oxygen 15.00% Carbon 3.80% Aluminum 0.80% Calcium 0.40% Magnesium 0.30% Phosphorus 0.10% Sulfur 0.10% Zinc 0.10% Manganese ore composition varies slightly based on the source and what region of Nigeria it is collected. We encourage buyers to ask for a free sample for their composition analysis and evaluation of ready-to-ship material. Samples are free, but buyers should arrange with a courier service of their choice to pick up a free sample.
Commodity 1 provides Lithium ore directly from the mine site to the global market. There are no middlemen involved, only our staff on the ground. We strive to organize smooth and transparent transactions. We believe in building long-term relationships with our customers. We aim to be our customers�¢?? lithium ore supplier. We offer the best prices for our buyers. PACKAGING & DELIVERY Packaging Details: LUMS/Chips Port: Lagos Apapa Port, Nigeria Bags: 50 kg Container: 20 ft Lead time: Quantity (metric tons) 20 MT/Month 60MT/Month Lithium time (days) 30 Days 30 Days CHEMICAL COMPOSITION ANALYSIS OF LITHIUM ORE Ingredient Percentage Lithium oxide (Li2O) 8% Alumina (Al2O3) 27% Silicon dioxide (SiO2) 64% Other minerals
Ferro silicon manganese.
