NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. PRODUCT SPECIFICATIONS Model NQGâ??5.8 Type Abrasive Rail Saw Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x 25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail 0.30mm Deviation of bidirectional cutting interfaces 0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Constant-fluron PTFE particle resin G401 is a free-flowing white powder composed of relatively large particles that is ideal for isobaric molding. Its most unique features are improved moldability at lower pressures and improved surface smoothness of finished parts. PTFE G401 is often used to form thicker sheets, and sometimes for the stamping of rods and pipes with thicker cross sections. Properly processed products made from high purity PTFE G401 have the superior properties typical of fluoroplastic resins Processing suggestion Fluoron PTFE is processed in two steps: preforming and sintering. The powder is first pressed into a preformed shape close to the desired molded product and then consolidated at temperatures higher than the melting point of the pure powder crystal using precise heating (sintering) and cooling cycles. The performance of the finished product depends on the bottle failure pressure, sintering time and temperature, and cooling rate. PTFE is used to make relatively large objects in molds that can be manually filled. Small particles of resin do not flow properly in the automatic feeding system.
ECAN-401S is a small intelligent protocol conversion product independently developed by Chengdu Ebyte Electronic Technology Co., Ltd. The product uses 8V, 28V wide voltage power supply, integrates 1 CAN-BUS interface, 1 RS485 interface, 1 RS232 interface and 1 RS422 interface, which can realize two-way conversion between CAN and RS485/RS232/RS422 different protocol data. The product supports serial AT command configuration and host computer configuration device parameters and working modes, and supports five data conversion modes including transparent conversion, transparent conversion with logo, protocol conversion, Modbus RTU conversion, and user-defined (user). At the same time, ECAN-401S intelligent protocol converter has the characteristics of small size, easy installation. It has a very high cost performance in the development of CAN-BUS products and data analysis applications. It is an engineering application and project debugging. And reliable assistants for product development.
"Introducing our Cute Baby Boy/Girl Crossbody Bag, the perfect travel companion for your little one! Made from plush material, this adorable mini bag is both sturdy and soft, ensuring superior comfort for your child. Measuring 26.5 X 24 X 10.5cm (10.4 X 4.1 X 9.5 inches), it's the ideal size for babies aged 2-6 years. Designed with convenience in mind, our baby boy/girl bag features two adjustable shoulder straps and a top handle, making it easy for children of all ages to carry. The main compartment and small front pocket provide ample space for storing books, pens, and other essentials, while the super cute animal cartoon design adds a touch of fun to every adventure. Fashionable, lightweight, and colorful, our baby boy/girl crossbody bag is perfect for school, trips to the zoo, park outings, travel, and other outdoor activities. It's the ultimate gift for baby boys and girls, ensuring they stay stylish and organized wherever they go!"
Good substitute for meat; Helpful for weight loss; Good for healthy heart; Act as memory boosters; Walnuts scientifically known as Juglans regia are the seeds of the Walnut trees that are small, single-seeded, and have a hard, woody shell. The outer shell is round or oval, and it encases the human brain shaped edible seed inside. The outer shell is tough, and when mature, it can be cracked to reveal the inner kernel or seed. The shell is typically divided into two halves, which is a distinctive feature of walnuts. The edible part of the walnut is the seed or kernel found inside the shell. The kernel has a wrinkled appearance and is light tan or beige in color. Walnuts have a rich, buttery flavor with a slightly bitter undertone. The texture of the kernel is both crunchy and creamy. Nutritional Composition: Walnuts are nutrient- dense and are an excellent source of healthy fats, particularly omega-3 fatty acids. They contain protein, fiber, vitamins such as vitamin E and some B vitamins and minerals including magnesium and phosphorus. Culinary Uses: - Walnuts are versatile and can be eaten raw, roasted, or added to various dishes. - They are commonly used in baking, salads, cereals, and as a topping for yogurt or desserts.
Length of benches: 1600 mm; 1800 mm; 2000 mm. Available in 3 wood colors. The pipe, bent in several planes on a CNC mandrel pipe bender, has a complex shape that allows the product to be operated in the most difficult and harsh conditions. Increased corrosion and wear resistance of the pipe structure is achieved thanks to the application of powder polyethylene thermoplastic paint. The service life of thermoplastic paint without change in color and structure is at least 25 years (as stated by the Stockholm Corrosion Institute). The wood is impregnated with a semi-matte transparent varnish antiseptic and varnish in two layers ("Renner" Italy). This is a high-quality finish with a light gloss, designed for smooth wooden surfaces and joinery. Excellent coating, both decorative and protective. Prevents the appearance of cracks, swelling and peeling. Ideal for garden tools. The coating has natural wood colors with an attractive light sheen. Forms a transparent, microporous coating that allows wood to "breathe". It has water-repellent properties, protects the wood from UV rays. Contains fungicidal and anti-anxiety additives. Board - Carpathian spruce. Thickness 40 mm. Pipe 38x1.5 mm.
I am acting as a sales representative for VVR Oils, based in Tamil Nedu, they have been producing and distributing refined cold pressed coconut oil for more than 70 years across kitchens in India. The company now wants to start exporting to Dubai, UAE aimed towards distributors and whole sellers who are in need of coconut oil. Our coconut oil does not get clumpy or milky, it is a golden hue that stays transparent in room temperature. We have two different types of edible oils, pure cold-pressed coconut oil and peanut oil used for kitchens. We can deliver to the UAE, 50'000 litres every month in Bottles or Tins, we are looking for wholesellers or distributuers. With our bulk order, we can deliver in less than 20 days We can also provide samples for you and your team to inspect to ensure quality is up to your standards. We only accept Letter of Credit or Cash against Document. We mainly do FOB, but we are prepared to negotiate for CIF.
Lithium battery powered Rail bolt wrench machine (model: LJ-LDB171X) is composed of host, control system, battery system and rail traveling part. The utility model has the advantages of compact structure, light weight, flexible assembly and disassembly, convenient use and no exhaust emission. It can be transported separately, which is convenient for single person to carry on site. The weight of the separated part is less than 15kg. It is applicable to the laying, maintenance and emergency rescue of railway, and is specialized in various railway bolt operations Specification Model NGM-4.4II Type Rail Profile Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1480*470*810mm Engine Two-stroke petrol engine/4.4KW Main shaft rpm 4670r/min Bolt screwing flat grinding wheel 125*65*M20 Grinding head angle of inclination 90 ° Grinding head stroke 45 mm Total weight 61kg
This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90�°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding. Specification Model NGM-6.0 Type Rail Profile Grinder Material Stainless Steel Dimensions (L x W x H) (mm) 1410*500*850mm Engine 2 stroke petrol engine M165 Power 6.0kW Grinding stone speed â?¥3900r/min Grinding stone inclination 0~90�° Grinding stone feeding stroke 42mm Grinding stone specification �?150x�?55x70mm Fuel tank volume 4.5L Profile wheel span 1000mm Feed adjustment accuracy 0.125mm Weight 60kg
This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90�°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding. Specification Model NGM-6.0 Type Rail Profile Grinder Material Stainless Steel Dimensions (L x W x H) (mm) 1410*500*850mm Engine 2 stroke petrol engine M165 Power 6.0kW Grinding stone speed â?¥3900r/min Grinding stone inclination 0~90�° Grinding stone feeding stroke 42mm Grinding stone specification �?150x�?55x70mm Fuel tank volume 4.5L Profile wheel span 1000mm Feed adjustment accuracy 0.125mm Weight 60kg
NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x 25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail 0.30mm Deviation of bidirectional cutting interfaces 0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Railway Crow Bar It is for situations such as these that the jim-crow comes into its own. The jim crow was slotted over the rail about four or five sleepers away from the offending joint.and the screw tightened until it engaged with the edge of the rail. Then tightened the screw a further half-turn - thus bending the rail slightly.This process was repeated, moving the jim crow one sleeper nearer the joint each time and each time adding one more half-turn. This introduces a gradually increasing curve to the rail as it nears the joint.If you compare these two pictures with those showing the kinks above, you can see the difference. The amount of bend can be tailored to suit each location - and if it turns out that have made the curve too severe, the jim crow can be slotted on the opposite way round and tightened up to ease the curve. Specification Type Crowbar Railway Material Steel Dimensions (L x W x H) 1500mm, 1800mm Place of Origin China Hubei Brand Name Linkage Item railway crowbar Brand Name Linkage Application Wrecking & Demolition, DiggingChiseling Tip Type Chisel End, Rolled Nail Puller for High Leverage, Heeled Pinch End Length 1500mm, 1800mm Weight 6 KG
Place of Origin Hubei, China Type rail profile grinding machine Material Stainless Steel Dimensions (L x W x H) (mm) 1410*500*850mm Brand Name Linkage Product name rail profile grinding machine Profile wheel span: 1000mm Engine 2 stroke petrol engine M165 Grinding stone speed: â?¥3900r/min Grinding stone feeding stroke: 42mm Fuel tank volume: 4.5L Feed adjustment accuracy: 0.125mm Power: 6.0kW Grinding stone inclination: 0~90�° Grinding stone specification: 150*55*70mm NGM-6.0 Internal Combustion Rail Profile Grinding Machine This Rail Profile Grinding Machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90�°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding.
High carbon silicon is composed of silicon and carbon alloy, also known as silicon carbon alloy, symbol SiC.High carbon iron silicon is commonly used deoxidizer has the following advantages: no hydrogen source in the deoxidizing process, to ensure safety and reliability; Carbon and silicon are important elements that determine the function of steel. High carbon ferro silicon can not only react with oxygen in the melting steel to play a deoxidation effect, but also the remaining carbon and silicon that are not oxidized can dissolve in the molten steel to play a role of increasing silicon and carbon, so as to achieve the effect of killing two birds with one stone. From the use of silicon carbon alloy can be seen in the replacement of some alloys have a great advantage, steel demand for silicon carbide alloy is also increasing, so silicon carbide alloy prospects.Reduce steelmaking cost, increase economic benefit, improve product quality, stable performance. The point use of high carbon silicon is that it can conducive to the reduction of production costs,Improve the quality of melting steel,reduce the amount of alloy,adjust the main alloy. The main point for choosing our company is the reliability of our products,have our own factory.
COAL (FOB ONLY) GAR: 5.600 - 5.800 ASH: Maximum 14% Sulfur: 0.99 1. 50,000 multiplied by 12 equals 600,000 metric tons. 2. Jetty Name: a) Ex.tanito b) Anugrah c) Masindo d) Deck e) Durian f) Jetty Makaramah Location: East Kalimantan Anchorage Name: Muara Berau Time from Mines to Jetty: 25 - 30 hours Time from Jetty to Anchorage: 26 - 28 hours 3. IUP OP SAE (PT Available) 4. Export License for Trader (PT. Available), from South Kalimantan 5. We have previous contracts with China. 6. Payment Terms: L/C USANCE a) L/C USANCE maximum 60 days b) Buyer can negotiate the price to become US$ 94.5 per ton for two shipments, remaining as per ICI 2 prices. c) Trial Contract: 12 months X 50,000 tons Many Thanks.
Coco Pith HS CODE 53050040 Features Ability to withstand high compaction force Eco-friendly and user-friendly 100% soil-less growing medium Soil conditioning and mulching agent Available in two variants Applications Large-scale nurseries, garden centers and agricultural fields. Washed / Low EC Coco Peat Specification Sl. No. Description Values 1 Block size 30 x 30 x 12cm +/- 1cm 2 EC Level Below 0.5ms/cm 3 pH level 5.8 - 6.8 4 Mesh 6 mm 5 Compression ratio 5:1 6 Expansion volume 15 Liters per kg 7 Moisture below Unwashed / High EC Coco Peat Specification Sl. No. Description Values 1 Block size 30 x 30 x 12cm +/- 1cm 2 EC Level Below 2.5ms/cm 3 pH level 5.8 - 7 4 Mesh 6 mm 5 Compression ratio 5:1 6 Expansion volume 13-14 Liters per kg 7 Moisture below Product Origin - Made in India only Minimum Order Size - Can be processed as per client requirement
The chickpea or chick pea is a legume of the family Fabaceae, subfamily Faboideae. Chickpeas are a type of pulse, with one seedpod containing two or three peas. It has white flowers with blue, violet, or pink veins. Its different types are variously known as gram or Bengal gram garbanzo or garbanzo bean, or Egyptian pea. Its seeds are high in protein. It is one of the earliest cultivated legumes: 7,500-year-old remains have been found in the Middle East. India produced 64% of the worldâ??s total chickpeas. Mature chickpeas can be cooked and eaten cold in salads, cooked in stews, ground into flour, ground and shaped in balls and fried as falafel, made into a batter and baked to make farinata or cecina, or fried to make panelle. Chickpea flour is known as gram flour or besan in South Asia and used frequently in South Asian cuisine. Chickpeas are a nutrient-dense food, providing rich content 20% or higher of the Daily Value of protein, dietary fiber, folate, and certain dietary minerals such as iron and phosphorus. Thiamin, vitamin B6, magnesium, and zinc contents are moderate, providing 10-16% of the Daily Value. Chickpeas have a Protein Digestibility Corrected Amino Acid Score of about 0.76 which is higher than many other legumes and cereals.
expertbinocular*com AstroScope Night Vision Variable Gain Adapter Pair Price:$5,999.99 SKU:EB-861613155 Brand:Nikon Availability:In Stock Shipping:Calculated at checkout Product Description Product Info for AstroScope Night Vision Variable Gain Adapter Pair The Night Vision Variable Gain Adapter Pair from AstroScope is designed to be used with a Nikon Digital SLR Camera. The AstroScope provides your camera with the ability to produce high resolution full-frame images under adverse lighting conditions. The rugged and compact design makes it ideal for demanding applications. Fitted with a high-performance 3rd generation image intensifier, the AstroScope significantly enhances your camera's low-light capabilities. AstroScope 914993 Specs Intensifier Tube 3rd Generation Construction Epoxy-coated aluminum Power Source Two 1.5V "AA" batteries Dimensions 2.3 x 4.0 x 12" / 58 x 102 x 305 mm Weight 1.10 lb / 499 g Packaging Info Package Weight 3.3 lb Box Dimensions (LxWxH) 16.8 x 8.7 x 6.4"
Hydraulic Rail Lifting and Lining Machine The� Rail Lifting and Lining Machine� has the fuction of ifting and lining. Its structure is simple, light, flexible, safe and reliable. This machine is powered by Honda GX390 petrol engine, drives gear pump, and controls the work of each cylinder by multi-way reversing, valve, so as to realize the movement of machine in place, hook rail, tilt and lift. BENEFITS When the two lifing cylinders stand upright, the lifing operation can be carried out When a lifing cylinder is tited out, the track can be dialed Adopt Honda GX390 gasoline engine as the power,the rail hook device adopts gear-engaged double hook synchronous rail clamping mechanism. The starting, cylinder, rail hook cylinder, traveling cylinder, and tilt cylinder are all hydraulicaly controlled. SPECIFICATION Engine Honda GX390, 6.6 kW Max. lifting force 150 kNx2 Max. lining force 130 kN Max. lifting stroke 1020 mm Max. lining stroke â?¥310mm/time System pressure 20 MPa Operation handle working force â?¤200N Dimensions 1760x900x1500 mm Weight 550 kg Size 1760x900x1500 mm
Welding and Track Maintenance Equipment Gas Pressure Rail Welding Machine Hydraulic rail weld trimmer/Hydraulic Rail shear Itâ??s A Special Small Size Machine Suitable For Shearing Thermit Weld Seam.Hydraulic Opreation,Save Labour,Shearing Clean. Itâ?? S Suitable For Dealing With Various Rails (50-75kg/M) At The Depot Or On The Track. Itâ??s An Accessory Tool In Cwr Laying Project, Rail Stress Releasing Operation And Broken Rail Repair.HWS-II Hydraulic Rail Trimmer Is Mainly Composed Of Machine Frame, Manual Pump Station, Two Horizontal Oil Cylinders, Guiding Device, Shearing Knife, Etc,. While Working, Ride The Machine On The Rail (At The Both Side Of The Seam), Place The Guiding Device Nearby The Rail Jaw, Then Swing The Manual Pump Handle Back And Forth. Along With The Cylinder Piston Rod Reaching Out, The Shearing Knife Makes Relative Motion To Produce Shear Force And Remove The Seam Bead.
