We are supplier of all type of beekeeping suits, jackets and gloves with high quality. We provide high quality with reasonable cost We makes three layer ventilated suit with 100% breathable and sting proof with fancy veil Easily remove and attach. 1005 cool and comfortable during working in form.
Glove (finger). Hand In Loofah , One Side is Loofah & the other one is 100% cotton Towel. ( Many Different Towel Colors ). Between both sides, there are some layers, one layer is 100% cotton lining Raw Clothes , and the other one is sponge. All sides and layers are combined & closed together by 100% cotton ribbon tape. ( Many Different Towel Colors ). At the end of the Loofah, there is a loop of 100% cotton ribbon for holding the Loofah on any shelves. Size: 17cm X 20cm
Latex Gloves, Orthopedic Supports, Hygiene Solutions, Homecare Solutions, Electric Bed, Commode Chairs..
A thin section was prepared for microscopic examination in transmitted polarised light. A count of 100 widely spaced points falling within sectioned sand clasts gave the following composition: 53% quartz as unstrained to mildly strained free simple grains (47%) or composite grains (6%) 11% quartz as moderately strained simple or composite grains 1% vein quartz (highly strained) 1% quartz as highly strained simple grains 2% quartzite (moderately strained) 2% chert (finely microcrystalline quartz) 20% feldspar (slightly sericitised and saussuritised)
Chemical Name: Zinc 2-mercaptobenzothiazole Specification: Item MZ-5 MZ-15 Powder Oiled powder Powder Oiled powder Appearance Light yellow powder Light yellow powder Initial M.P. �¿C â?¥ 200.0 200.0 200.0 200.0 Loss on drying % â?¤ 0.30 0.50 0.30 0.50 Zinc content % 16.0-22.0 16.0-22.0 15.0-18.0 15.0-18.0 Free M % â?¤ 5.0 5.0 15.0 15.0 Residues on 150�¼m sieve, % â?¤ 0.10 0.10 0.10 0.10 Additive, % -- 1.0-2.0 -- 1.0-2.0 Properties: Light yellow powder with light bitter taste. Specific density is 1.65--1.72. Hardly soluble in acetone, benzene, ethanol, and carbon tetrachloride. Insoluble in water, gasoline. Decomposed in strong acid and alkali. Application: Used for NR, IR, SBR, NBR, EPDM and latex. May be regarded as an intermediate between Accelerator MBT and Accelerator MBTS. Used as a secondary accelerator in combination with Accelerator ZDMC and Accelerator ZDEC. Have the similar performance as MBT at curing temperature in dry rubber application. Has lower scorch and better has processing safety. Suitable for mold curing. Requires zinc oxide and stearic acid as activators in many kinds of rubber batch. Easily disperses in rubber; yields non-staining and non-discoloring products. Mainly used in the manufacture of latex products, foam rubber, latex coating gloves, etc. Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is 2 years when stored under normal conditions.
Product Name: Portable Body Exercise Fat Burning Equipment Workout Set Material: 1. 1 aluminum Bow (56" x 9.5" x 1.75") 2. 4 100% latex double wall resistance cables (10, 20, 32 & 45 lbs) Packing: One set in a carry bag. Function: 1.Help bulid endurance 2.Help metabolism 3.Lose fat, not muscle 4.Heart healthy workout
Material: 1. 1 aluminum Gorilla Bow (56" x 9.5" x 1.75") 2. 4 100% latex double wall resistance cables (10, 20, 32 & 45 lbs) Packing: One set in a carry bag. Function 1.Help bulid endurance 2.Help metabolism 3.Lose fat, not muscle 4.Heart healthy workout
BIT-85 CAS NO: 2634-33-5 Specifications: Item NO Description Appearance White or whitish powder Content of Active Substance (%) 85 MIN Content of Moisture (%) 215 MAX Application field: Be used as one of formula materials; can be made into BIT products with different degrees of concentration; used in the latex, industrial oil additives, leather, paint, textile, printing and dyeing, daily chemicals, and cosmetics industries to protect against corrosion. Performance characteristics Inactive to alkali; suitable for use in the medium of the pH value in the range of 2-14 Autions: Operational instruction must be strictly followed. Avoid any contact with the skin. Wear protective clothes, goggles, and rubber gloves in operation. Once any contact with the skin happens, wash the skin immediately with plenty of water and soaps; when it splashes into eyes, wash immediately with plenty of water and buffer solutions. Packaging: 25 kg per cardboard drum Storage and Transportation: With a shelf time of one year when stored at room temperature in a dark, air-tight, and moisture-proof place If you have any demand about my products.
Trendy sneaker with stunning details, beautiful Âcolours and a perfect fit. Featuring practical lacing and a side zip for easy access, the incredibly versatile Margot allows comfortable handling and all sorts of great styling options. Supporting 6 mm cork-latex footbed. Features a side zip and enchanting details What does the fair2feet seal mean? The fair2feet seal of quality is awarded after a successful audit of the shoe model. The audit is conducted on the basis of the fair2feet quality system. The fair2feet seal serves the customers of the shoe trade, online or statioinarily, as an aid in the search for a suitable shoe that meets their needs. You can find more information under fair2feet. How is the testing of the shoes carried out? The completely independent fair2feet - Institute for Quality and Certification first performs a computer tomography scan of the shoe models. On the basis of the CT images, a precise, non-destructive digital measurement of the shoe interior is then carried out. The results lead to the transparency of the inner dimensions of the finished shoe, measured in millimeters. By comparing the actual dimensions determined with the manufacturer's size specifications and with the recommendations of the relevant international standards (ISO), it is finally possible to assess the dimensional accuracy. The shoes are then subjected to an orthopedic examination using the fair2feet criteria catalogue, which, together with a summary utility value analysis, leads to a final point value result. If the audit is successfully completed and a correspondingly high score is achieved, this is the basis for the award of the seal. In principle, the fair2feet quality audit follows the same analysis steps. The evaluation within the scope of the orthopedic audit then sets special accents for comfort or comfort shoes, for example in the assessment of toe clearance, the rolling space or the ball width of the respective shoe model.
OIT-99 2.CAS#: 26530-20-1 Specifications No. Item Description 1 Appearance Yellow transparent dense form liquid or tie crystal 2 Content of Active Substance (%) 99min 3 pH value 1.0max 4 Density (g/ml) 1.03-1.05 Application field Suitable for applications in the industrial oil, plastic, building materials, leather, paint, and textile printing and dyeing areas to protect against mildews Performance characteristics 1. Demonstrate an excellent bactericidal effect; with broad-spectrum, long-lasting features. 2. Low toxicity; easy to operate; can be added at any production step. 3. Applicable in the medium of the pH value in a range of 5 to 9. 4. Good uniformity of dispersion; contain no VOC; with thermal stability. 5. Not combustible and easy to transport and use. 6. Stable in the intense ultraviolet or acid rain environment. Usage andCautions 1. It is recommended to use the concentration of using in the range of 0.1 to 0.5%, depending on the actual applications. This product is also widely used for sterilization of interior and exterior latex paints to protect against mildews; suitable for use in the production of eco-friendly latex paints; it is recommended to adopt the adding concentration of 0.1 - 0.3% depending on the performance and service environment of paints. 2. If it splashes onto the skin, rinse with water immediately to avoid irritation or cauma. 3. This product should be used in the medium of pH 9.5max. 4. Wear protective clothes, rubber gloves, goggles and masks; avoid any contact with the skin, eyes and mucous membranes. Packaging 200 kg per drum. Storage and Transportation To be stored at room temperature in a dark place; with a shelf time of one year If you have any demand about my products.
Disposable sterile patient gown Disposable coverall is made from high-performance isolation protective material. Widely used in medical safety protective, aseptic workshop, protective isolation, mining electronics factory, food factory farm animal husbandry biohazard and so on. With two kinds processes: Sewing and ultrasound thermal bonding. Material features: 1. PP disposable patient gown It is made from hydrophobic polypropylene material, Latex-free; Abrasion-resistant; Low lint; With a high level of fluid repellency. Color: White, green, blue, yellow, orange and so on Material weight: 30-65GSM. 2. PP+PE disposable patient gown It is made from PP+PE material, Latex-free; Abrasion-resistant; Completely impervious fluid and alcohol repellent. Color: White, green, blue, yellow. Material weight: 40-65GSM. 3. SMS disposable patient gown (Standard and Reinforced): It is made from hydrophobic SMS/Spunlace material, Latex-free; Abrasion-resistant; Low lint; With a high level of fluid repellency; A good barrier to blood, body fluids and pathogens. With standard and reinforced style. Reinforced style with extra protection reinforcement on sleeve & chest which can be completely impervious fluid and alcohol repellent. Available color: White, blue. Material weight: 35-65GSM. 4. Microporous disposable patient gown Permeability is strong, anti-static; Better permeability, in a variety of organic solvents, acid and alkali corrosion resistance at the same time, with high resistance to impact mechanical properties of the toughness, texture soft, comfortable not combustion-supporting non-toxic non-irritating, harmless to skin. Available color: White Material weight: 45-65GSM. MEDDOCARE also can provide you: 1. Face mask(1-3ply), many colors, tie on or with earloop; 2. Cap(such as bouffant cap/clip cap/mob cap/worker cap, etc. ) 3. Lab Coat(SBPP/PP+PE/SMS) 4. Coverall(SBPP/PP+PE/SMS/SF) 5. Surgical Gown(PP/PE/SMS) 6. Apron(PE) 7. Sauna coat/kimono(PP) 8. Sleeves(PP/PE) 9. Gloves(HDPE/LDPE) 10. Shoe cover(PP/CPE/PP+CPE/PE) 11. Boot cover(SBPP/CPE/SMS, etc. ) 12. Others(such as bed cover/Gauze roll/Mattress cover, etc. )
Strong self adhesive fabric hook and loop There are countless uses for non-adhesive Hook and Loop fastener. They are Widely used on clothing, shoes, hats, bags, sofa, curtain, toys, tents, gloves, sports equipment, medical equipment and all kinds of military supporting. Regular color: Black, white Material:Grade A 100% nylon; Grade B 50% nylon+50%polyester; Grade C 100% polyester Regular size (mm) :10 , 12.5, 16, 20, 25, 30, 38, 50, 60, 70, 80, 100, 110, 125, 150, 180
TPU Elastic Band/TPU Band from specialized TPU materials used for binding Vegetables (Gourmand)/ Medical Organization/ Clean-room (Antistatic)/ Garment Packaging: - Various sizes and colors. Customize according to customer requirements. - Optional extra anti-static surface (ESD). - Our products have passed the 200 harmful substances test and are tested. - All of our elastic band products are recyclable and eco-friendly. - 100% free of latex, no fine dust and powder. - Printable. - Thin and light. We hope to have more opportunities to discuss more details about products and cooperate with your company.
100% Polyester Sherpa Fabrics Plain Dye Sherpa Fabrics Jacquard Sherpa Fabrics Printing Sherpa Fabrics Discolor Sherpa Fabrics Width: 150cm,160cm,180cm,200cm,or customized Weight:280gsm,300gsm,350gsm,or customized Usage: Garment,Sportswear,Dress,Lining,Shoe,Glove,Toy,Home textile etc. Package: Roll packing with thick plastic bag, or customized.
These 3 Layer Surgical Face Masks individual wrapped are manufactured in for superior comfort and protection. This added value is not only visible in the high-quality construction of these masks; you will be confident knowing you are protecting yourself and others with genuine lab-tested products and a rigorous manufacturing process. 50 pieces per box, 40 boxes in case of 2000. You can trust Made in Canada. Hypoallergenic, no Latex and no Graphene, Disposable, Earl loop, Metal wire for adjustable fit, Blue Colour (can produce white or black on Special Order) 50 pieces per boxIdeal for: Medical and casual use, indoors and outdoors.3-layer constructionOuter Layer: 100%PP Non woven Fabric Inter Layer: 100% Melt-blown Fabric, Inner Layer: 100% PP Non-woven Fabric Ear loop design with metal nose bridge, Fits most adults and teenagers 12+ Bulk orders are negotiable.
Product Description 1. Directly manufacturer, disposable surgical gowns, any colors. 2, ISO, CE, PP, PP/PE, SMS, SMMS, 3. Capacity: 10, 000PCS/day, 1*40HQ can be finished within 10-15 days; 4. Good barrier to fluid and breathable, OEM packing design, service in 24 hours. Disposable Medical Reinforced SMS Surgical Gown with Velcro Disposable surgical gown Disposable coverall is made from high-performance isolation protective material. Widely used in medical safety protective, aseptic workshop, protective isolation, mining electronics factory, food factory farm animal husbandry biohazard and so on. With two kinds processes: Sewing and ultrasound thermal bonding. Material features: 1. PP disposable surgical gown It is made from hydrophobic polypropylene material, Latex-free; Abrasion-resistant; Low lint; With a high level of fluid repellency. Color: White, green, blue, yellow, orange and so on Material weight: 30-65GSM. 2. PP+PE disposable surgical gown It is made from PP+PE material, Latex-free; Abrasion-resistant; Completely impervious fluid and alcohol repellent. Color: White, green, blue, yellow. Material weight: 40-65GSM. 3. SMS disposable surgical gown (Standard and Reinforced): It is made from hydrophobic SMS/Spunlace material, Latex-free; Abrasion-resistant; Low lint; With a high level of fluid repellency; A good barrier to blood, body fluids and pathogens. With standard and reinforced style. Reinforced style with extra protection reinforcement on sleeve & chest which can be completely impervious fluid and alcohol repellent. Available color: White, blue. Material weight: 35-65GSM. 4. Microporous disposable surgical gown Permeability is strong, anti-static; Better permeability, in a variety of organic solvents, acid and alkali corrosion resistance at the same time, with high resistance to impact mechanical properties of the toughness, texture soft, comfortable not combustion-supporting non-toxic non-irritating, harmless to skin. Available color: White Material weight: 45-65GSM. Port: Shanghai or Wuhan Original: China Delivery time: As the quantity and time when we receive the 30% deposit MEDDOCARE also can provide you: 1. Face mask(1-3ply), many colors, tie on or with earloop; 2. Cap(such as bouffant cap/clip cap/mob cap/worker cap, etc. ) 3. Lab Coat(SBPP/PP+PE/SMS) 4. Coverall(SBPP/PP+PE/SMS/SF) 5. Patient Gown(PP/SMS) 6. Apron(PE) 7. Sauna coat/kimono(PP) 8. Sleeves(PP/PE) 9. Gloves(HDPE/LDPE) 10. Shoe cover(PP/CPE/PP+CPE/PE) 11. Boot cover(SBPP/CPE/SMS, etc. ) 12. Others(such as bed cover/Gauze roll/Mattress cover, etc. )
Our leggings are made in Europe with high quality fabrics mainly mixture of cotton and lycra, viscose and lycra. We also have a production line of polyester leggings (high and low waist) designs. MOQ is 100 pcs, we can also manufacture a particular design of leggings if you provide us with the pattern of prototype and fabrics. We always strive to provide a quality product which fits as a glove on your body and makes you feel comfortable while walking or exercising. Our goal is making a product that would add value to our clients and build with them long-term relationship. The FBO price mentioned above it might vary, depends on quantity and destination.
Surgical items, examination gloves, surgical gloves, nitrile gloves, syringe, needles, urine bags, catheter, feeding tube, iv set, cannula, cannula fixer, cotton gauge.
Headgear are made in 100% (Cowhide Leather) Description: Head Guards Made of 100% Cowhide Leather Triple density contoured foam for ultimate shock absorption, ultra lightweight to allow faster head movement and high class Velcro closure for a customized no-slip fit. Brings you the most perfect head gear protection at an affordable price. High profile protective padding on brow, cheek, ear, and chin. Size: S,M,L,XL. Color: Black Blue - White Blue - White Red - Black Red - White Pink. Size Required:- Small; Medium; Large; Extra Large AKEWAL SPORTS is a Manufacturer and Exporter of Gloves, Uniforms, Equipments, Accessories of Martial Arts, Boxing, MMA, Fitness, Sports Wear and All Sorts of Soccer Balls. We focus on producing premium quality products .
ISO9809-3 150bar 37MN TUV TPED Oxygen Tanks Gas Cylinders 1 Minimum order quantity: 100 only 2 Use cylinders:Our seamless steel cylinders are widely used in industry, medical devices, fire fighting and scientific research Oxygen gas cylinders During the blanking process of gas cylinder production, the inner and outer surface and end face of the steel pipe shall be checked one by one, and the inner and outer surface of the billet shall not have cracks, serious pits, folds, folds, layers apart and scarring. The end face is smooth, no obvious burr, the inner and outer surface is clean, no feeding iron and debris, and check the perpendicularity and perpendicularity of the cylinder body one by one. This document (EN ISO 9809-3:2010) has been prepared by Technical Committee ISO/TC 58 Gas cylinders in collaboration with Technical Committee CEN/TC 23 Transportable gas cylinders, the secretariat of which is held by BSI TUV gas cylinders Interpretation of test results The interpretation of the burst test results shall involve: a) examination of the pressure/time curve or pressure/volume of water used curve, to permit determination of the pressure, py, at which plastic deformation of the cylinder commences, together with the bursting pressure ph; b) examination of the burst tear and of the shape of its edges. 150bar gas cylinders Product Information: 10.8 litres to 80 litres; 89mm-267mm cylinder outer diameter; Working pressure is 150bar; Hydrostatic test pressure is 250bar; 37 mn material; Iso9809-3 or GB/T5099.3 production standards; 2The minimum design wall thickness of gas cylinders is 2.4mm-6.2mm; The cylinder body weight is 1.60kg-72.4kg; The height of the cylinder body is 197mm-1520mm; Cylinder mouth threads include PZ19.2,PZ27.8,PZ39; 25E; 3/4-14 NGT, etc.; Maximum gas storage is 0.12m3-12m3 (150L-12000L) 3Aliases: Oxygen gas cylinders; Germany Rhein gas cylinder; 150 bar cylinder; Oxygen bomb; Gas cylinders 4A cylinder shall be considered to be of a new design, compared with an existing approved design, when at least one of the following applies: a) the nominal outside diameter has been changed; b) the guaranteed minimum thickness has been changed; c) the hydraulic test pressure, ph, has been increased (where a cylinder is to be used for lower pressure duty than that for which design approval has been given, it shall not be deemed to be a new design); d) the guaranteed minimum yield strength, Reg and/or the guaranteed minimum tensile strength, Rmg, have changed. Oxygen gas cylinders