Product overview WS-4089 is a kind of cationic polymer of polyamide & epichlorohydrin. It can be retentioned via effectively being attracted by pulps with negative charges at fast speed. The thermosetting chemical reaction will be resulted in at the dry section of dryer. The high wet strength of paper is from the stable chemical binding Technical specifications �· Appearance: Light yellow transparent liquid �· Ionic type: Cation �· Solids content: 12.5 �±0.5% �· pH: 3-5 �· Viscosity(25�ºC): â?¤ 100 mPa.s Performance characteristics WS-4089 is easily absorbed by fibers and can be gelatinized at medium or alkaline conditions. It is widely used in papers that need higher wet strength, such as tissues paper, decoration base paper, coated paper, map paper, food package paper, fruit bag paper, medical paper. Usage tips 1. Dosage: 5 kg to 30 kg for each mt of absolute dry pulp (or as per paper sheet situation) 2. It can be used in paper making afte adding into head box continuously via meter pump 3. It performs best at neutral and alkaline conditions. Packing and storage The package can be 200 Liters, 1000 Liters drum or as per clients' requests. It should be stored in cold place. The shelf life time is around 6 months.
Acid Dyes Acid dyes are anionic water-soluble dyes that are used to alter the colour of fibres like silk, wool, nylon, and modified acrylic fibres from neutral to acid. Basic Dyes Veeraco Colourants Private Limited is a top basic dyes manufacturers in India. Our highly developed infrastructure makes research, cultivation. Read More Cationic Dyes Cationic Dyes are modified basic dyes and are available in both liquid and powder form. This is a class of synthetic dyes, that act as bases and when made soluble in water, Daylight Fluorescent Pigments Daylight Fluorescent Pigments have extraordinary brilliance, strength and clean shades. We give 24 eye-catching shades in our series or various applications. Food Colours Food colours are hues that have been chemically produced. Food colours were created as per international food colour quality standards. Optical Brightener It acts as an additive imparting brightness in polymers and intensifying the degree of whiteness. They tend to soak up light in the UV spectrum.. Pigments Pigments are a type of colourant that differ from dyes in multiple ways. Its primary work is to add colour to various materials ranging from cosmetic products... Solvent Dyes Solvent dyes, which are soluble in non-polar fluids and employed in a plethora of requests such as inks, plastics, and petroleum, are known for their versatility. Solvent Soluble Colours Its characteristics are mentioned in the name itself, these dyes are solvent-soluble organic metals exhibiting brilliant shades and excellent properties. Sulphur Dyes Sulphur dyes are water-insoluble and must be transformed to a soluble (leuco) form with an alkaline reducing agent such as Sodium Sulphide (Na2S) Vat Dyes This class of dyes is classified by the method used to apply them. Vat dyeing needs a bucket or vat for the dyeing process. They have high colour fastness...
Features : Multi Color & Multi Material Capability High quality printing with 7 m Lidar Resolution Upgradeable and customizable flexibility High speed CoreXY with 20000 mm/s Acceleration Dual Auto Bed Leveling What to Expect from the X1-Carbon 3D Printer 20 m/s�² acceleration Micro lidar assisted bed leveling Active vibration compensation for better print quality Spaghetti failure detection and auto-pause Print resume after power outage Advanced materials empower advanced projects. Bambu Lab X1 Carbon, equipped with extra cooling and a hardened nozzle and drive gear, unlocks a wider selection of materials, including PA, PC, PET, and TPU, and specializes in carbon fiber and glass fiber reinforced polymers. Colors & Beyond With Bambu Lab Automatic Material System (AMS)ï¼?you can now enjoy printing freely in multiple colors and materials. Vibration Compensation & Extrusion Compensation The active vibration compensation (XY) algorithm and extrusion compensation guarantees extra smoothness and gets you good prints. Dual Auto Bed Leveling Dual Auto Bed Leveling system checks for increased reliability.The lidar and analog force sensors crosscheck for an extra layer of redundancy in bed leveling. Al inspected first layer Tired of waiting out that first layer? The lidar sensor can check your first layer so that you can get back to doing...anything else.
Polyglyd bearings range defines the new advent in the era of sliding bearings which are made 100% from different derivatives of polymer components manufactured either through injection moulding or high precision machining of the extruded material. This range has excellent self lubricating features & wear resistance characteristics achieved through high strength fibres which also insures of the load bearing capacities. The special lubricants embedded in these range of bearings maintains the right friction coefficient friction as well an improvement of the service life. CROWN RANGE The self-lubricating feature of the Crown â?? CE bearing is achieved by adding solid lubricants and functional fibers into the body material and the friction coefficient is decreased by the solid lubricate grease immersion. The friction coefficient is affected by the load, operating speed and shaft roughness. The friction coefficient is generally decreased along the load increasing and increased along the operating speed.
Petra Sulphonated Asphalt is a high-performance drilling fluid that is formulated using a blend of sulphonated asphalt, polymers, and other additives. Sulphonated asphalt is a byproduct of the refining of crude oil, which has been modified through a chemical process to improve its properties for use in drilling fluids. This type of drilling fluid is designed to offer superior rheological properties, fluid loss control, and shale inhibition, which can help to reduce the risks and costs associated with drilling in challenging environments. Overall, Sulphonated Asphalt drilling fluid is a reliable and cost-effective solution for drilling operations in demanding environments. Drilling in shale formations: Sulphonated Asphalt Drilling Fluid is highly effective in inhibiting the swelling and disintegration of shale formations, which can help to reduce the risk of lost circulation and other problems when drilling in shales. 1) High-temperature drilling: Sulphonated Asphalt Drilling Fluid is stable at high temperatures, making it suitable for drilling operations in geothermal wells and other high-temperature environments 2) Wellbore stabilization: Sulphonated Asphalt Drilling Fluid is designed to minimize the amount of fluid that is lost into the formation during drilling, which can help to improve wellbore stability and prevent costly good control issues 3) Horizontal drilling: Sulphonated Asphalt Drilling Fluid can be used in horizontal drilling operations to reduce friction and improve drilling efficiency 4) Elevate your drilling processes with our premium range of specialty chemicals. From drilling mud additives to fluid loss control solutions, our meticulously crafted chemicals are tailored to boost efficiency and minimize downtime. Explore our comprehensive selection today. SULPHONATED ASPHALT ADVANTAGES: 1) Superior rheological properties, which provide excellent control over the viscosity and gel strength of the fluid, reducing the risk of stuck pipe and other issues. 2) Exceptional fluid loss control, minimizing the amount of fluid that is lost into the formation during drilling, improving wellbore stability, and preventing well control issues. 3) Effective shale inhibition, inhibiting the swelling and disintegration of shale formations, reducing the risk of lost circulation and other problems when drilling in shales. 4) Stable at high temperatures, making it suitable for drilling operations in geothermal wells and other high-temperature environments. 5) Can be used in horizontal drilling operations to reduce friction and improve drilling efficiency. 6) A cost-effective solution for drilling operations in challenging environments, reducing the risks and costs associated with drilling.
PRECISION PLASTIC INJECTION MOLDING Digital manufacturing for plastic prototypes and on-de-mand production parts. Request an injection molding quote today. Injection molding is a manufacturing process for producing parts by injecting molten material into a mold. Material for the part is fed into a heated barrel, mixed and injected into a mold cavity where it cools and hardens to the configuration of the cavity. Fangling Precision Plastic Mold Parts / Complete Molds Precision Mold Parts/Spare Parts With quality high precision mold parts, fast lead times, excellent customer service and support, Fangling will be your first choice of precision machining company. Precision Plastic Injection Molds/Tools We use durable materials like steel to create precise molding tools to manufacture quality products. We employ injection molding facilities for creating standard designs as per the client's demand. WHY CHOOSE FANGLING FOR INJECTION MOLDING? If you are looking forward to getting the ultimate injection molding service, then you must choose Fangling for obvious reasons. Why Choose Fangling for Injection Molding? Reputed Brand Fangling is a reputed name for providing the ultimate precision mold services, for saying the least. Latest Technology They use the modern and latest technology to cater to their customers with faultless molding service in the best way possible. They provide the best precision molded plastics for the job. Affordable Despite providing high-quality precision injection molding service as per the excellent industry standard, their service rates are decent and affordable. Other Perks and Benefits There are so many other perks and benefts that you are supposed to get from availing of their service. You should know about precision injection molding Inc. MATERIALS USED IN INJECTION MOLDING There are different kinds of materials used in making precision mold parts and injection plastic parts. Thermoplastics are most used in this regard. Not to mention, a hundred types of various thermoplastics are used in injection molding. INJECTION MOLDING PROCESS Precision injection molding is an effective manufacturing process that produces single parts and products utilizing different materials, commonly thermoplastic and thermosetting polymers. This method is used to manufacture different everyday plastic products such as chairs, bottle lids, telephones, toys, packaging, etc.
Short Description: 1 Double coating layer technology, each layer has different function contribution 2) The coating layer is 100% water soluable material, food contact directly,absolutely safe 3)The coating layer can be treated on paper machine (FK1+ coating layer) or offline coating what is EPP ? 1) EPP is three English Words's Abbreviation: Environment Protection Polymer ,it is the code of our new product(Zero plastic or plastic free cupstock ), like GCU,also a patened technology which we developed in NAPPEPP 2) The technology focus an unique coating technology which provide the finished cup excellent hot sealing performance,water or oil resistance, low migration (to beverage), low odor 3) our EPP also focus three key demand in the market repulpable(Beingrecycled in paper or board stream), bio-degradeable, Compostable Why choose EPP? 1)The plastic is everywhere 2)To being a member of the Earth, everyone has the responsibility to do something 3)To being a papermaker, we should do sth., we have the capabilty to do something 4)To being the largest pulp and paper interprise in the world, we should do something Paper Cup - Brand owner and regulatory Statements Increasing pressure by brand owners and governments for replacement of PE with new materials â?»Increasing need for Recyclability â?»Biodegradability â?»Use of bio-renewable materials â?»Elimination of food contamination Why EPP can protect the earth(Ourselves)? To achieving the sealing function and water resistance function without PE We take the plastic (PE) off from the finished cupstock(No PE,offering same function), the finished cup is not plastic+ paper What we are doing is to improve the environmental deterioration our EPP mission 1) Our main challenge is to reduce and eliminate non-reworkable packaging waste. 2) Our mission is to create materials that enable sustainable packaging solutions forour daily lives. LDPE global production ca. 25million ton- China: 3.5million,14.5% - USA: 13.3% - Japan:5.2% Top3 manufacturers: -Exxon Mobile: 1.6million, 6.5% -Lyondell Basel: 1.55million, 6.3%-Sinopec: 1.47million,6% China demand ca. 5.5million/a Global Paper Cup LDPE demand ca. 0.7 million/a, CN about 0.2m/a PAPER and BOARD 1) For paceaging aplicatons, our sustainable EPP coating technologies are a healthy solution for the entire value chain, and unique appearanceand performance. 2) Create bespoke textures to match your brand identity 3) Packaging compliant with food contact regulations 4) Products which fulfill barrier coating requirements
COMPANY PROFILE QUANZHOU TOGETHER ECO TECH CO.,LTD� are devoted to� Popularize 100% Recycled and Biodegradable Non-woven fabric, Provide quality solutions and customer satisfaction through valued-added products and services. biodegradable materials PLA SPUNBOND NON WOVEN FABRIC PLA meltblown nonwoven fabric PLA/PET/RPET SPUNLACE NON-WOVEN RPET Spun-bond nonwoven fabric PET spunbond non-woven fabric RPET stitchbond non woven fabrics SMS/SMMS/SSMMS NON-WOVEN FABRIC FACE MASK.DIAPER.MEDICAL PRODUCT MATERIAL RPET stitchbonded nonwoven bag PLA non woven shopping bag RPET spunbonded non-woven bag What is polylactic acid (PLA)? PLA is not plastic. It is derived from nature. Starch is extracted from plants such as corn and cassava and fermented by microorganisms to produce lactic acid. Lactic acid undergoes an advanced polymerization process to produce a 100% green and safe new polymer material called polylactic acid (PLA). Products made from this material are healthy and safe, non-toxic and odorless, and have no harm to the human body. In addition, if the product is discarded under composting conditions, it can be completely decomposed by microorganisms, eventually generating carbon dioxide and water, and returning to nature. The environment does not cause any pollution, so PLA is recognized as a â??green materialâ?? for low-carbon environmental protection and sustainable development in the 21st century. PRODUCT DESCRIPTION Material: 100% Polylactid Acid Technics : Spunbonded� Weight:� 10-250GSM Width: 160-300-320cm or customized Color:� customized MOQ:� 1tons/white, 5tons/other color Special Process: with UV/Laminated(PP+PE) / Printed /Hydrophilic/pre-cut/Fire treatment Hard or soft finition with nice and shinny surface Main Uses (1) medical and health care cloth: surgical clothing, protective clothing, sterilizing cloth, mask, diapers, sanitary napkin, etc; (2) home decoration fabric: wall cloth, tablecloth, bedspread, bedspread, etc; (3) follow the cloth: lining, bonding,, shaping cotton, various synthetic leather soles, etc; (4) industrial fabrics: filtration materials, insulating materials, cement packaging bags, geotextiles, covering cloth, etc; (5) agricultural cloth: crop protection cloth, seedling cloth, irrigation cloth, thermal insulation curtain, etc; (6) other: space cotton, thermal insulation materials, linoleum, cigarette filters, bags and tea bags, etc.
Background Plastic films and sheets are typically made by melting polymer material and then shaping it through processes like extrusion or calendaring. During this production, the material is stretched in the machine direction, and as it cools, some internal stresses remain. When reheated, these stresses can cause the material to shrink, altering its dimensions. This shrinkage is crucial for quality and process control in plastic manufacturing. It helps assess process consistency, adjust production parameters, and understand material characteristics. Industries like packaging rely on shrinkage data to ensure precise fit after heat exposure. In essence, shrinkage is a key factor in maintaining product quality and process efficiency in plastic film and sheet production. Application The FST-01 Film Free Shrink Tester is used to measure the unrestrained linear thermal shrinkage of plastic film and sheets at specified temperatures in a fluid medium. This device helps assess how much these materials will shrink when exposed to heat in real-world applications. Test Process 1. Temperature Setup and Stabilization: Set the temperature on PID controller and the fluid is heated to a preset temperature and temperature is stabilized. 2. Specimen Preparation and Submersion: Mount the test specimen into the free shrink holder. Submerge them together into the liquid bath. 3. Time Monitoring and Completion: The timer starts to count down and when the test time is reached, an alarm will beep, signaling the end of the test. 4. Test Conclusion: Carefully remove the test specimen from the liquid bath. Press the Stop button on the tester to mark the conclusion of the test. 5. Shrinkage Measurement and Assessment: Treat test specimen in ambient environment and Measure the linear shrinkage of the specimen. Calculation To calculate the unrestrained linear shrinkage percentage using the given formula: Unrestrained Linear Shrinkage (%) = [(Lo - Lf) / Lo] x 100 Where: Lo = Initial length (100 mm) Lf = Length of the side after shrinking Technical Features 1. Precise P.I.D. temperature control 2. High-precision timer 3. Alarm capability 4. Consistent fluid medium heating 5. Inclusion of a standard square metal clamp and a free shrink holder 6. Equipped with an oil bath cover Standard: ASTM D2732 Main Parameters Sample Size â?¤160 mm x 160 mm Temperature Range Ambient ~ 200C Accuracy ±0.3 C Dimension 37*44*28 LWH cm Power Supply 220V 50Hz
Product overview: CRM-8501 is an organic polymer compound of cation quaternary ammonium salt type. The advanced technology and raw materials are from developed countries. The characteristics are as below: The effective concentration is 10 times or 15 times higher than common retention acid liquid. It has better fluidity, easy & fast dissolution, no caking or granularity phenomenon. It has very good adaptability and can adapt to kinds of papers of kinds of pulps. Product function mechanism during the paper-making process 1. To neutralize the paper surface charge. The pulp and filler are of negative charges and the charges can be neutralized and decreased by adding into CRM-8501so as to form micro-floc when the potential towards zero. 2. To be inlaying effect. The electrostatic of positive charge on CRM-8501 surface can attract pulps and fillers whose surface is of negative charges. 3. To be bridging effect. Higher molecular weight and longer enough molecular chain will result in bridging between fines and fillers so as to form micro-floc. 4. The micro-floc of fines and fillers will decrease the porous structure blockages of wet paper layers and increase the permeability properties of papers. Appearance: Milky white liquid Solids content: 38�±1% pH value: 3-6 Viscosity : â?¤ 500 mPa.s Performance characteristics 1. To increase the retention rate of paper fines and fillers dramatically so as to decrease the pulp consuming qty. 2. To decrease the concentration of whitewater, wastage of fines&fillers and the whitewater pollution. 3. To increase the permeability properties of pulp and the wet strength of paper. To increase the production speed of paper-making machines so as to increase the production. 4. Without any pungent odor. And has better fluidity under lower temperature Usage tips Dosage: Around 0.3 kg to 0.8 kg per mt paper ( adjust as per different pulps and production processes) To add CRM-8501 evenly and slowly into dilution tank with ready water. And add additional water till requested qty ( the dilution concentration of CRM-8501 is usually 1-3). To stir the diluted concentration for around 20 to 30 minutes before entering into paper-making system via flow pump. Packing and storage The package is 200 Liters plastic drum or 1000 Liters IBC drums or as per clients' requests. It should be stored between -5C-30C. The shelf life time is 3 months. To wave the CRM-8501 before dilution and the diluted liquid can be stored 3 days at most.
The X-MET8000 is practical, rugged and easy to use to deliver results you can trust. The light and ergonomic design of the X-MET8000 ensures it is comfortable to use on a daily basis. The nose is designed to test material inside bends and corners. Using Hitachi HEROTM window, which is heat resistant, the X-MET8000 can accurately analyze alloys up to 400 C. The X-MET8000 range of handheld X-ray fluorescence analyzers delivers the performance needed for rapid alloy grade identification and accurate chemistry of a wide variety of materials (solid and powder metals, polymers, wood, solutions, soil, ores, minerals etc). The X-MET handheld XRF analyzer (HHXRF) is practical, robust and easy to use to deliver results you can trust. The X-MET series of handheld X-ray fluorescence (XRF) analysers are flexible and easy-to-use for elemental analysis within production environments, manufacturing plants and scrap metals processing. The optimised combination of a high performance X-ray tube & large area silicon-drift detector (SDD) delivers the performance required for the most demanding PMI and scrap metals applications. The Hitachi XMET-8000 comes in 3 configuration options: XMET800 Smart, XMET8000 Optimum and X-MET8000 Expert. X-MET 8000 Optimum can provide results on site in seconds, depending on the application. Phenomenal reliability and speed, with no requirement to return for lab assessment, mean optimum productivity, lower costs and an all-important edge over your competitors. Data can be stored on the analyzer, on a USB flash drive, or through our app and cloud service for immediate sharing. Designed to be portable, simple to use and with a with a 10-12 hour battery life, the X-MET8000 Optimum Geo is able to withstand the harshest environments and weather conditions. It also offers analysis results in seconds with real time data sharing for fast decision making. The Boost technology delivers low levels of detection while the integrated GPS enables users to combine geolocation data with analyses results for flawless site mapping. Key Features: X-ray tube : 40kV or 50kV X-ray tube filters: Single Detector: Large area SDD Max. sample temperature : 100�ºC or 400�ºC with HEROâ?¢ heat resistant window (optional) IP54 rating Protection against detector window damage : Optional window shield Calibrations : Standardless (includes light elements analysis) Integrated camera (Optional) Small-spot collimator (Optional) 6-position filter wheel for the optimised analysis of all elements from Mg to U
CASHEW NUT SHELL LIQUID CNSL or Cashew Shell Oil or Refined Cashew Nut Shell Oil is a versatile by-product of the Cashew industry. The nut has a shell of about 1/8 inch thickness inside which is a soft honey comb structure containing a dark reddish brown viscous liquid.It is called CASHEW NUT SHELL LIQUID or CNSL. Which is the pericap fluid of the Cashew Nut. It is often considered as the better and cheaper material for unsaturated phenols. CNSL has innumerable applications, such as friction linings, paints, laminating resins, rubber compounding resins, cashew cements, polyurethane based polymers, surfactants, epoxy resins, foundry chemicals, and intermediates for chemical industry. It offers much scope and varied opportunities for the development of other tailor-made polymers. CNSL undergoes all the conventional reactions of phenols, CNSL aldehyde condensation products and CNSL based phenolic Resins are used in applications such as surface coatings, adhesives. Various polyamines synthesised from CNSL are used s curing agents for epoxy resins. CNSL and its derivatives have been used as antioxidants, plasticizers, and processing aids for rubber compounds, modifiers for plastic materials and used to provide oxidative resistance sulphur-cured natural rubber products. It is also added to rubber gum stock or nit rile rubber to improve the processability, mechanical properties and resistance to crack and cut properties of the vulcanisates A number of products based on CNSL are used as antioxidants, stabilizers and demulsifies for petroleum products.Soluble metal derivatives of C.N.S.L are used to improve the resistance to oxidation and sludge formation of Lubricating oils.Oxidised CNSL and its derivatives are also used as demulsifying agents for water in oil type petroleum emulsions. CASHEW NUT SHELL LIQUID OIL used for manufacturing of CNSL Resin, Cardanol or Card Phenol or Cashew Phenol, Cashew Friction Dust, Anti corrosive hiring (lining) chemicals, Paints, Varnishes, Enamels, Insecticides and Fungicides, Cashew Laquers, Bakelite, Electrical conductress, Cashew Cements, Core Oil, Red Oxide, Wood, Fuel, Speciality Chemicals, Foundry Chemicals and many other Industries
Switch JC21A-03-06-00 for winch JC21D Diesel generator set accessoriesC550D5 QSX15G8 crankshaft rear repair kit 3926126 Liquid end accessories GJC70-25 PG05A+TH06 Plunger 5" Drill pipe hanger accessories ZQ203-100 tooth plate 90*32.65*16.5mm 01*â?´ Valve: Needle For Tds Ps-500A 7500697 Wire rope clip Y-12mm Liquid end accessories GJC70-25 PG05A+TG06 Two copper rings for plunger 3 1/2" hydraulic hose 2.4.21.005 Drill pipe clamp accessories ZQ203-125 Transfer cylinder assembly 19.400.00 35�?35 BOP accessoriesFZ35-35 Plug NPT1/2" JK00309-32 Detroit Diesel PartsAir distribution system*air filter P546613 PIN, CLEVIS 30172181-03 S05-1006-010 BELT. Catalog number: 01.06.01.00M. MANUFACTURER: JIANGSU RUSHI MACHINERY CO., LTD. Equipment: HYDRAULIC POWER TONG ZQ203-100. Brake device accessories ZJ-40 Asbestos-free brake band assembly Detroit Diesel PartsDiesel Engine*Starter Motor PDC bit 215.9mm M1365 DERRICK 4" DESILTER CONE ASSY. AND 4" CERAMIC LINED 11234-00 Winch drive shaft accessories ZJ-32J No. III parallel axle Screw:Cap-Hex Hd Drilled F/ Tds 11S 50016-12-C5D coating agent for drilling fluid Beam Hydrophobic Association Polymer HMP DCS-R 4-1/2 - 6 Drill collar Slips with repair kit includes (1 set of circular buttons, Handles (2x sides and center), 3x Handle Pin with cotter pin, 3x Hinge Pin with cotter pin) PLUG CAVITY 93667-M11 MUD SCRAPING PROTECTION 20A41FVGE0073.00 Dryer 81099-00-8100 for pneumatic system of chassis XD-60ZJ-20 Insert valve 2.2.08.003 Air pump connecting rod bush 282751 MAN33.373DFC Engine* Valve Pusher Bearing rollerNU244-E-M1-C3 FRICTION DISC W60-07-901 Three-stage circuit breaker MCC cabinet NS160N with TM160D Liquid end accessories PCT521 TPH400 Val Rubber 4-1/2" P40-44-1 NUT, HEX, JAM 50320-C SLEEVE, WEAR 109591 109539 SPACER RING: FOR TDS9S Three-stage circuit breaker MCC cabinet NS80H with MA25 Logging tool accessories dipole acoustic logging tool KClog dipole launch plate 9650341042 Falcon 79877 CRANK,ASSY LEBUS groove JC191.13.04.02.00 For Drawworks JC40DB transmission no. 2 transmissionShaft accessories ZJ-45J 2# unit and axle 29.27.50 100GZ-5K 53003-32 PLUG, SQ HD MAGNETIC ACCESSORY BLOCK AND BLEED VALVE, FOR 5000 PSI WP, WITH 1/2" NPT CONNECTION,0-6007043-18000 Electromagnetic eddy current brake accessoriesZJ-32 winch high speed end water air hoist assembly JC32B3 SHIM, COMPOUND RETAINER 109586-1 Circuit Breaker 1600A 120VAC TPRP5616NQARHC Drill pipe clamp accessories ZQ203-100 Jaw Plate Assembly 5-1/2" 0101-15M00 654518A SPACER ASSY. Ring 247x2.65 for YJ5B hydraulic winch SPRING PLATE , JC030803 "TAIHANG" JET DRILLING FLUID MIXING DEVICE, MODEL: PZHQ-150, CHART NO.: JCL-01-00, REF. TAIHANG SOLIDS CONTROL SUBCOMPANY, CHINA NOZZLE, P/NO.: JCL-07 94522-1BN VALVE CARTRIDGE PRESSURERELEIF LINER, UPPER STEM 98290 190 series diesel engine12VB.24.130 common *pipe collar sub-parts SPACER LEFT ROTARY TABLE ZP-375 IDM 105.06.01
Features 1) Translucent body, RGB illusion fiber optic light bar, 4 sets of on-board light effects switchable 2) Rubber covered hand grip 3) 6-axis gyroscope: supports Swtich native body sensing + PC simulated body sensing 4) 4 additional defined keys 5) Hall trigger, 2-speed trigger limit lock 6) ALPS rocker + steel ring anti-friction ring 7) Audio support: receiver 2.4G wireless audio 20ms low latency, support PC, switch 8) Built-in 1000mAh polymer lithium battery 9) Continuous fire, key change, macro 10) Mobile phone APP real-time tuning reference 12) Support Switch host one button awake 13ï¼?Can be purchased separately with the magnetic charging base 14) 2.4G receiver can be purchased separately: support wireless audio and multi-platform guide function
Features 1) Translucent body, RGB illusion fiber optic light bar, 4 sets of on-board light effects switchable 2) Rubber covered hand grip 3) 6-axis gyroscope: supports Swtich native body sensing + PC simulated body sensing 4) 4 additional defined keys 5) Hall trigger, 2-speed trigger limit lock 6) ALPS rocker + steel ring anti-friction ring 7) Audio support: receiver 2.4G wireless audio 20ms low latency, support PC, switch 8) Built-in 1000mAh polymer lithium battery 9) Continuous fire, key change, macro 10) Mobile phone APP real-time tuning reference 12) Support Switch host one button awake 13) Can be purchased separately with magnetic charging base 14) 2.4G receiver can be purchased separately: support wireless audio and multi-platform guide function