Sino-NSH-GED-WD is a waste oil regeneration system that cracks waste oil to diesel fuel. Sino-NSH-GED-WD adopts the atmospheric distillation technology, also known as cracking technology. During the distillation process, the waste oil is heated to the setting temperature and turns into oil mist, then it passes through the catalyst tower. After sufficient reaction with the catalyst, the oil mist passes through the condensing system to be cooled to liquid diesel. This system can be applied for gasoline motor oil, diesel motor oil, all kinds of engine oil, mineral oil, synthetic oil, transmission oil, hydraulic oil, gear oil and other used black lubricant oils to produce clean diesel oil. Diesel acquired from NSH-GED-WD system meets international standards and can be fully applied to burners, diesel engines, generators, etc. This system is very safe because the temperature setting is rigorous and the machines are stabilization. Our technical team commits to design the most reasonable and high efficient distillation system to realize the profit maximization of the both parties. Recovery rate is above 90% with low operation cost, only 5-6 USD for recycling one ton used oil.
Machines & Equipments Manufacturer Brand All machines and equipments are fully computerized. Reeling / Rewinding / Singeing & Hank to Cone Rite S.p.A ( Italy) Mercerizing Jaeggli Meccanotessile (Italy) Hank Dying Loris Bellini (Italy) Package Dying Loris Bellini(Italy) Dryer Loris Bellini (Italy) Lab Equipments Mesdan ( Italy) Color Matching System Data Color (USA) Auto Dosing System (Chemical / Dyes) Sate (Italy) In addition to above, state of the art lab along with various automatic systems have been installed to ensure better quality of end products and to protect and ensure safe working environment. Gul Ahmedâ??s Effluent treatment plant is another example of our efforts for being an environmentally and socially responsible company. Product Line: In this plant we are producing PACKAGE DYED YARN //GASSED MERCERIZED DYED Yarn from in 100% Cotton. We take this opportunity to offer you following Count Rang, based on samples approval. Gassed Mercerized Dyed Yarn: Ne 20/2 Carded Gassed Mercerized Dyed Ne 30/2 Carded Gassed Mercerized Dyed Ne 32/2 Carded Gassed Mercerized Dyed Ne 40/2 Carded Gassed Mercerized Dyed Ne 20/2 Combed Gassed Mercerized Dyed Ne 30/2 Combed Gassed Mercerized Dyed Ne 32/2 Combed Gassed Mercerized Dyed Ne 40/2 Combed Gassed Mercerized Dyed Ne 44/2 Combed Gassed Mercerized Dyed Ne 50/2 Combed Gassed Mercerized Dyed Ne 60/2 Combed Gassed Mercerized Dyed Ne 80/2 Combed Gassed Mercerized Dyed Ne 100/2 Combed Gassed Mercerized Dyed Ne 110/2 Combed Gassed Mercerized Dyed Ne 120/2 Combed Gassed Mercerized Dyed Cone Dyed Yarns: Ne 20/s Carded Dyed Waxed Ne 30/s Carded Dyed Waxed Ne 40/s Carded Dyed Waxed Ne 20/s Combed Dyed Waxed Ne 30/s Combed Dyed Waxed Ne 40/s Combed Dyed Waxed Ne 60/s Combed Dyed Waxed Ne 80/s Combed Dyed Waxed We can also accommodate other Count (Knitting or Weaving) of your interest.
African dry lace embroidery 100% Cotton, general finished width of 41/42" or 51/52"
We are door manufacturers using 100% genuine teak wood. Done by professional craftsmen, and with maximum results. Our production has been going on for decades traditionally from generation to generation, with guaranteed quality and sold throughout Java.
Naphtha 100 & 150, petroleum, diesel en590 10 ppl & 50 ppl.Transport and delivery
100% Natural Sun Dried Sri Lankan Almond Its very healthy Prodcuts naturally generate from sri lankan almond trees.
We offers for sale a special stock of hydraulic hose 3/8'' DN10 2SN and 2SC LIMITED STOCK SPECIAL PRICE high quality Cidat Italy hose, the hose is covered with special blue and yellow anti-UV and anti-abrasion rubber, it is a special hydraulic hose that withstands more bar, i.e. 400 bar nominal and breaking at 1200 bar, robust and quality STOCK limited to only 3.32 net + VAT per meter unique PRICE on the market order minimum 100 meters of mixed rolls price is negotiable
CHOCKFAST ORANGE (PR-610TCF) is a specially formulated 100% solids, two component inert filled casting compound developed for use as a chocking or grouting material. CHOCKFAST is designed to withstand severe marine and industrial environments involving a high degree of both physical and thermal shock. The compound is non-shrinking and has very high impact and compressive strength. Years of successful in service experience have shown the use of PR610TCF to be a far superior yet less expensive method of establishing and permanently retaining precise equipment alignment under extreme conditions. PR-610TCF is approved or accepted for its intended marine use by American Bureau of Shipping, Lloyd's Register, Bureau Veritas, Det Norske Veritas, Germanischer Lloyd and most other major regulatory agencies worldwide. Benefits CHOCKFAST ORANGE was developed as a chocking or grouting compound for use under marine main propulsion machinery in depths of to 4 (12mm to 100mm). The compound is used under diesel and gas engines, reduction gears, generators, compressors, pumps, bearing blocks, crane rails and numerous other applications. PR-610TCF requires no special tools or special skills as does chocking with steel. When cast, CHOCKFAST ORANGE flows readily into the chock area filling voids and conforming to all irregularities. This eliminates the machining of base plates or foundations for a perfectly fitted chock. Packing details : 6.8 kg Per Unit 4261 CC
---------Description--------- ! We provide installation work and operational training for all of our equipment! Mobile Screening & Sand Washing Plant is a single-chassis solution for stone, sand other mineral quarries where the product needs to be sorted out and washed to get clean and ready-for-usage construction aggregate. Being one of the developed solutions for the stone crushing field, all parts of the line are constructed on a single chassis, where attachments like additional bunker walls, walking platforms, and conveyor belt are of foldable design. DISTINCTIVE FEATURES OF THE MACHINE: 1. Compact design: loading hopper, vibrating screen, screw sand washer, conveyor belts, diesel generator & walking platforms are installed on a single mobile chassis. 2. Easy transportation: machine can be transported with a single truck head. 3. Fast assembly and dismantling work: assembly work of the machine takes only 2 days. 4. Screening & Washing of the product: a combination of screening & sand washing processes can be performed with a single machine in place. 5. Stocking: foldable design conveyor belts are supplied with hydraulic pistons, which allow for the assembly of conveyor belts from a control panel to easily. Mobile Screening & Washing plant models are: SMSW 1240 600x6300 mm Single Helix / 1200x4000 mm screen / 60-100 T/H SMSW 1650 600x6300 mm Double Helix / 1600x5000 mm screen / 150-200 T/H SMSW 2250 800x8000 mm Double Helix / 2200x5000 mm screen / 250-320 T/H
Specifications: API SG/CD Packaging: 1 L metal container 12 units / case 4 L metal container 4 units / case 5 L metal container 4 units / case 20 L plastic container 1 unit / case 208 L drum TECHNOL EXTRA 20W-50 has been formulated for both gasoline and diesel engines of passenger cars and light commercial vehicles of previous generation. This engine oil is perfectly adapted to vehicles equipped with catalysts and using unleaded fuel. It has thermal stability, antioxidant, antiwear and anticorrosion properties, contains detergent and dispersants that keep the engine clean and preserve its power.
Sino-NSH-CP series is an oil purification system with thermal, filtering and centrifugal separation processing, with capacity from 1500 liter/hour to 6000 liter/hour. Sino-NSH-CP series is especially designed for the oil industry for the purification and recycling of liquid oil. This series is designed to overcome the harmful effects of oil contaminants, water and solid particles from fuel oil, lubricating oil and other mineral engine unit and land generator unit of power station so as to reduce wear of diesel engine and other machine, and prolong the serving life. The model is also used to separate two unsolvable liquids with different specific gravity or remove small amount of solid particle from liquid.
Approvals: MB-Approval 229.51 Meets the requirements of: BMW LL-04 GM DEXOS 2 RN0700/0710 MB 229.51/31/226.5 Specifications: API SN/CF ACEA C2/C3 TECHNOL PLATINUM 5W-30 is a new generation of Low SAPS (low content in Sulphated Ash, Phosphorus, and Sulphur) engine oil specifically formulated to meet the technical requirements of gasoline and diesel engines of new vehicle models. Its Low SAPS technology makes it the lubricant of choice for optimal operation of engines of the latest generation, equipped with anti-pollutant devices. This engine oil ensures the optimal functioning of three-way catalytic converters and particulate filters and compliance with performance levels declared by vehicle manufacturers, and Euro V environmental standards. Its excellent resistance to temperature variations guarantees the longevity of engine parts and optimal performance under all circumstances.
Technical Parameters Travel of X and Y Axes: 1000x1200 mm; Maximum cutting thickness: Standard: 800 (Can be adjustable) mm; Maximum Work piece weight: 2000 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1010Ã??1500 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 100 square mm/min; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 1.2 KVA; Approx. Machine size (LxWxH): 3100x2500x2300 mm; Approx. Machine weight: 5000 kg; Approx. Machine control cabinet size: 1200x800x800 mm; Approx. Machine control cabinet weight: 150 kg.
We are producers of tables and chairs made from 100% genuine teak wood. Done by professional craftsmen, and with maximum results. Our production has been going on for decades traditionally from generation to generation, with guaranteed quality and sold throughout Java. Our work takes place in Dlingo, Bantul, DI Yogyakarta.
100 Amp 3 ph Motorized Control Digital Variable Voltage Auto Transformer [Oil Immersed] [HSN CODE: 85044029] [Make: POWERSELECT] Technical Specification: Model: PS100A3POEM470V Rated Power: 75 KVA Input Voltage: 415 V AC 3phase�¸ (L - L), �±5% 50 / 60 Hz 4 wire / 3 wire No Load Current: Less than 1% of rated unit Output Voltage: 0 - 470 V AC 3Phase�¸, (L - L) �±10% 4 wire / 3 wire Output Current @470V: 0 - 100 Amp per phase max Variac Oil Qty: 200 L (Approx. +- 10 L) Recommended IS335 Reference Standard: IEC 61378-1 & IS 5142 : 1969 Voltage Variation: Motorized Operation with 10 kg torque AC Synchronous Servo Motor Servo Motor: 10 Kg torque AC Synchronous Servo Motor 220 V AC 1 ph. (Make: PowerSelect) Coil Construction: 1 Coils used in per phase of 100 Amp each rating Total Coils: 3 Coils used in unit each coil rating max 100 Amp Current Transformer: 3 nos. 100/5 Accuracy class 0.5% Protection: 3 pole MCCB on Primary line (Make: L&T) Enclosure IP Rating: IEC 60529, IP50 (Sheet Steel) with powder coated paint (Color: Siemens Gray) Connection Terminals: DMC molded bar insulators terminal Oil Drain: Oil Drain valve tap bottom of tank front sided Oil Level: Oil level indication front of tank with glass view Earth Terminals: Ground / earth terminals provided back sided Winding Wire: IS 12444, ASTM B-49 Pure Copper DCC wire Core Type, Grade of lamination: CRGO Laminated Core 30ZH100 Load : balanced load Service: Indoor Application Variac Dimension (LxBxH) and Wt (Kg): 24 x 32 x 50 (Approx) Net Wt: 250 Kg (Approx.) Gross Weight: 350 kg
100% Cotton Swiss Voile Allover Schiffli Embroidery, luxury items ranging from plain voile to color change swiss embroidery width a general finished width of 51/52"
we produce 100% cotton gun cleaning cloth for army and general use,. 10 cm width and red line after every 5 cm. for quick response whats app wa.
Sugarcane bagasse tableware is made from sugarcane bagasse pulp without any plastic or wax coating. It is biodegradable, compostable, and has a strong integrity to hold shape when used with solid and liquid food. Bagasse Pulp / Sugarcane bagasse /Bleached Sugarcane Bagasse Pulp / UnBleached Sugarcane Bagasse Pulp Sugarcane Bagasse / sugarcane bagasse products / Tray / plats / Blows / Cups / Bio-degradable eco-friendly range is 100% natural & plant Base
started manufacturing Polymer Soluble dyes in 2003 and since then, we have slowly but steadily, introduced new products into our range which now covers a diverse range of colours with a total capacity of 1000 tons/year. Polymer-soluble solvent dyes, often referred to as solvent-soluble dyes are essential in colouring plastic products. These dyes are specifically crafted to dissolve effortlessly in polymers, offering a seamless integration that transforms the appearance of plastics with vibrant and long-lasting hues. As a leading manufacturer of dyes in India, we take pride in presenting a range of high-quality polymer-soluble dyes that cater to the diverse needs of the plastic industry. The solvent dyes refer to the dye being insoluble in water but soluble in an organic solvent. Solvent dye powder are used to color organic solvents, hydrocarbon fuels, oil, waxes, lubricants, plastics, ink, coatings, and resin. Solvent dyes can be divided into oil & wax soluble which are mainly used for fuels and resin coloring, and solvent-soluble deys which are mainly used for ink, and plastics colouring. Baoxu offer a wide range of solvent dyes including solvent blue, black, green, orange, red, yellow, and violet. Click on to check product details, contact us if need a sample or inquiry. solvent red: 23, 24, 25, 41, 52, 111, 135, 146, 149, 168, 179, 195, 196, 197, 207 solvent yellow: 14, 16, 54, 93, 98, 114, 147, 157, 160:1, 163, 176 solvent blue: 35, 36, 67, 78, 97, 104, 122 solvent violet: 13, 26, 31, 36, 37, solvent orange: 14, 60, 63, 107 solvent green: 3, 5, 28
Technical Parameters : Travel of X and Y Axes: 800x630 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1130x9500x300 mm; Maximum Work piece weight: 750 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 2200x1650x1910 mm; Approx. Machine weight: 2980 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
