1060 coated aluminum coil1060 coated aluminum coil is rolled to very fine tolerances to yield more closure per tonne of stock and to allow uninterrupted operation of high-speed, multiple-cavity presses. Besides, our 1060 coated aluminum coil is relatively low strength, essentially pure aluminum alloy with many different tempers, such as O (annealed), H12, H14, H16, H18, etc. Features & Applications Mirach Coating's 1060 coated aluminum coil has good corrosion resistance as well as poor machine-ability, and its machine-ability can be improved in harder (cold working) tempers, such as H16 and H18.For its features above, 1060 coated aluminum coil has a vast application, such as cladding, indoor decoration, exterior wall decoration, household appliances panels, railroad tank cars, etc. Specifications AA 1060 O/H12/H14/H16/H18/H22/H28/H112/H24/H26 Mirach Coating's Raw coil: Both DC and CC are available Thickness of our coated coil: 0.08~6.0 mm (normally 1.0~3.0 mm, tolerance ±3%) Max coating width: 2600 mm Hardness of 1060 coated aluminum coil: 1H for pencil test The painting thickness: PVDF 25mic; premier 5mic, PE paint 18mic; tolerance ±0.002 mm Painting type: PE (polyester), PVDF, Nano PVDF, FEVE Paint brand: Normally PPG and Beckers or as requested Coated colors for 1060 coated aluminum coil: RAL, NCS, Pantone etc. and other color on request Guarantee for color coating: 15~20 years guarantee Adopted Standards ASTM-B-209M, BS EN 485-2, BS EN 573-3, YS/T429.2-2000, GB/T3880-2008 1060 coated aluminum coil Chemical CompositionGradeSiFeCuMnMgCrNiZnAl10600.250.350.050.030.03--0.0599.6 Mechanical properties of 1060 coated aluminum coil:TOLERANCEMajor BrandA1060(O)Thickness0.2-0.40.4-0.80.9-1.11.2-1.61.8-2.0tolerance ±0.01 ±0.015 ±0.02 ±0.025 ±0.03Width1250tolerance ±0.1 ±0.2 ±0.2 ±1 ±2BURR AND COLLAPSEThe width of aluminum beltburr's heightcollapsed side's height1.60.03MECHANICAL PROPERTYU.T.S: 60-95N/mm2Elongation: >25%Density in 20 °C: 2.703kg/dm3Max. resistance in 20 °C: 0.02825 ©mm2/m Ordering & Packing for our 1060 coated aluminum coil Our MOQ: 5 MT/Spec Coil OD.: max. 1750 mm Packing: protection and wooden pallets with fumigation for seaworthy Essential details for inquiry: alloy, temper, coating thickness, color, sizes, and your end usage
1070 coated aluminum coilThe 1070 coated aluminum coil content aluminum reach 99.7%, , so it is a kind of pure aluminum product. Our 1070 coated aluminum coils are the materials used in the manufacture of some structure with specific performance, it is with high plasticity, thermal conductivity characteristics and good electrical conductivity. Adopted Standards BS EN 485-2, BS EN 573-3, ASTM-B-209M, YS/T429.2-2000, GB/T3880-2008 Capacity & Availability 1070 O/H12/H18/H22/H24/H28/H32/H34/H14/H16 Coating type: PE (polyester) coating, PVDF coating, Nano PVDF coating, FEVE coating Gloss of our coated aluminum: 10~90% (EN ISO-2813: 1994) Paint colors: RAL, NCS, Pantone etc. or on request Paint brand: Normally PPG and Beckers / as requested Anti-abrade: abrasion coefficient�1.6L/um after sand trail Coating thickness: PE coating�18mic; PVDF coating�25mic; premier�5mic, tolerance ±0.002 mm 1070 coated aluminum coil thickness: 0.08~6.0 mm and normally 1.0~3.0 mm, Mirach Coating's tolerance ±3% Width Tolerances for our 1070 coated aluminum coil:Specified Thickness(Inches)Specified Width (inches)Up Thru 6Over 6Over 12Over 24Thru 12Thru 24Thru 480.006-0.1250.0101/641/323/640.126-0.1860.0121/321/321/16 Chemical Composition of our 1070 coated aluminum coil:GradeSiFeCuMnMgCrNiZnAl10700.200.250.040.030.03--0.0499.7 Features & Applications Mirach Coating's 1070 coated aluminum coil has excellent corrosion resistance andsatisfactory anodizing and conversion coating finishing characteristics.For its features above, 1070 coated aluminum coil are widely used in many fields, such as Building wall, roofing, furniture cabinet, lighting plate, Shipping plate, solar reflective plate, Corner protector, Beverage bottle, cap, ring-pull, cosmetics shell and cover. Packing & Ordering MOQ: 5 MT per spec Essential info for inquiry: alloy & temper, detailed sizes, coating thickness/color, final usage Coil id.: 150mm / 405mm / 505mm / 508mm / 510mm Packing for the coating aluminum coils:   Inner Core: Paper Tube  Outer: Paperboard  Wooden Pallet Weight per coil: 1~6 MT per coil as requested
Fluoropolymer Increasingly more technical applications in aggressive environments, in terms of temperature, chemical agents and atmospheric conditions, made it possible for fluoropolymers to find more space on the market. These polymers offer extremely high performance, though at elevated costs regarding both raw materials and production. Depending on the bond between carbon and fluorine, and their arrangement in the molecular structure, one can have varying products with different characteristics. Concerning chemical resistance and use at low and high temperatures, the father of all fluoropolymers is PTFE, which demonstrates almost complete inertia towards most known chemical reagents and has work temperatures that range from -260 to +260 'C. After PTFE, these other fluoropolymers can be found, in order of importance: PFA, FEP, and PVDF.
Features The new steel structure, patented mechanical synchronous drive technology, through the proportional valve, in the weld area to achieve uniform pressure. suitable for all types of thermo plastic sheet (PP-R, PP-H, PP-B, PP-S, HD-PE, PVC-U, PVC-RL, PVDF). Control system Siemens PLC, 7-inch color touch screen. Data parameters are automatically selected according to the material a particular welding pressure, temperature and time. 3mm-30mm welding capabilities, special welding thickness of 40 up to 60mm. Range of Application Manufacturing water tanks and containers, plastic devices, ventilation systems, water treatment systems, Scrubber, environmental technology, swimming pool, transportation and logistics.
FluonETFE Series Fluon ETFE is a tough fluoropolymer that has chemical resistance and electrical properties comparable to typical fluoropolymers, such as PTFE, PFA and FEP but performs better than ECTFE or PVdF because of its improved mechanical strength and moldability. Fluon ETFE Usage: Wire and cable Tubing Linings and coatings Other Fluon ETFE Grade List: Pellet Grade Melt Flow Rate* Features Molding Methods and Applications C-55AP 5 - 7 General product Extrusion molding C-88AP 10 - 13 General product Extrusion molding C-55AXP 5 - 7 Resistant to stress cracking Extrusion molding, tube molding C-88AXP 10 - 13 Resistant to stress cracking Injection molding, electric wire coatings C-88AXMP 30 - 48 High fluidity Thin electric wires, thin-walled injection
The printing production line of colored steel plate is a complete of production equipment for colored steel plate, and the process is as follows: make the steel coil strips be subject to surface degreasing, parkerising and passivating treatment, then apply multi-layer organic coatings (e.g., coatings of modified resin (SMP), high weather-resistant polyester (HDP), polyvinylidene fluoride (PVDF) etc.) on the strip surface by means of continuous roller coating, next, overprint multi-color patterns, and finally compound to form new functional plates. The production line is composed of equipment of uncoiler, sewing machine, tension machine, storage machine, degreasing and washing unit, roller-coating machine, printing machine, curing furnace, shear, coiler etc..
1. Introduction Sampling heated tube is one important part of the environment protection monitoring system, widely used for SCNR, SNR, waste incineration and other emission sampling. 2.Specifications Gas pipe material: PVDF, PTFE, 316L, PFA Black knit anti-scratch layer Air tube size: OD8/6mm,OD6/4mm (optional) Power consumption: 10-100W/M (depending on heating tempeature) Power supply: 220VAC 50HZ Sample gas heated temperature50~220 No breakpoint and cold point all the way Using temperature controller to control heating temperature precisely Excellent heat preservation effect Heated tube external diamete: OD38±2mmOD42±2mm Minimum bending: 0.5m Lowest working temperature: -20 Minimum installation distance: vertical 2m, horizonal 4m.
Application and Features: Applicable to connect the PE, PP, PVDF pipe; By frame, hydraulic station, electric control of milling cutter and the bracket of the heating plate; System with real-time welding data record and print functions, and can be derived via USB data; System with DVS2207-1 welding standard, and support custom Settings; The standard single chip fixture, the pipeline to enhance accuracy Optional components: Short flange welding special fixture The main parameters: Model SD-FA250 Welding range mm 90,110,160,200,250 The highest temperature heating plate 270 The heating plate surface temperature difference 170-250 ±5 Pressure regulating range 0.4-6Mpa Working voltage 220V 50Hz The heating plate power 2 KW Milling power 1.1 KW Hydraulic total power 0.75 KW The total power 3.85 KW The weight
Standard Gb/t12754-06 tdc51d+z, tdc52d+z, ts250gd+z- ts550gd+z Jis g 3312, cgcc, cgcd En 10169, dx51d+z, dx52d+z, s250gd+z- s550gd+z Technical data Color: according to ral color standard or customersâ?? color sample Steel quality: commercial quality and drawing quality. Zinc coating: from 60 gsm to 180 gsm. Zinc spangle: regular spangle, minimized spangle. Surface treatment: bright or matt finishing Painting materials: pe, smp, pvc, pvdf Size specification: Thickness: from 0.14 mm to 1.2 mm Width: 914mm, 1000mm, 1219mm, 1200mm or 1250mm Pitch: 76mm Wave height: 8-12mm or as per customersâ?? drawing Delivery term Steel type: sheet/plate
Standard Gb/t12754-06 tdc51d+z, tdc52d+z, ts250gd+z- ts550gd+z Jis g 3312, cgcc, cgcd En 10169, dx51d+z, dx52d+z, s250gd+z- s550gd+z Technical data Color: according to ral color standard or customersâ?? color sample Steel quality: commercial quality and drawing quality. Zinc coating: from 60 gsm to 180 gsm. Zinc spangle: regular spangle, minimized spangle. Surface treatment: bright or matt finishing Painting materials: pe, smp, pvc, pvdf Size specification: Thickness: from 0.14 mm to 1.2 mm Width: 914mm, 1000mm, 1219mm, 1200mm or 1250mm Pitch: 76mm Wave height: 8-12mm or as per customersâ?? drawing Delivery term Steel type: sheet/plate
Product content description: Corrugated ppgi steel sheet/plate is mainly used for construction, warehouse, steel structure etc. The main characteristics are light weight, good strength, colorful, water proof, long life etc. Technical data Color: according to ral color standard or customerscolor sample Steel quality: commercial quality and drawing quality. Zinc coating: from 60 gsm to 180 gsm. Zinc spangle: regular spangle, minimized spangle. Surface treatment: bright or matt finishing Painting materials: pe, smp, pvc, pvdf Size specification: Thickness: from 0.14 mm to 1.2 mm Width: 914mm, 1000mm, 1219mm, 1200mm or 1250mm Pitch: 76mm Wave height: 8-12mm or as per customersdrawing
1100 coated aluminum coilOur 1100 coated aluminum coil is technically pure with at least 99% aluminum. Thus compared to 3003 alloy, , it characterized with excellent forming characteristics, very high thermal, superior corrosion resistance, highly reflective and decorative. Mirach Coating's 1100 coated aluminum coil are enjoying the most competitive balance on quality and price with strict quality inspection. Capacity & Availability  AA 1100 HO / H12 / H14 / H16 / H26 / H112/ H18 / H22 / H24/ H32  Max coating width: 2600 mm  Thickness: 0.08~6.0 mm and normally 1.0~3.0 mm with tolerance ±3%  Coating thickness: PE18mic; PVDF25mic; premier5mic, tolerance ±0.002 mm  Color Difference for our 1100 coated aluminum coil: within 5 luster degrees  Painting type: Nano PVDF paint, FEVE paint, PE (polyester) paint, PVDF paint  Paint brand: Normally PPG and Beckers, and other brands available as requested  Coated colors: NCS, Pantone, RAL etc. or on request  Guarantee for paint: 15~20 years  Anti-abstersion experiment: Coating film do not break with adhesive tape 1100 coated aluminum coil mechanical propertiesThickness (mm)Tensile strength (Mpa)Yield strength (Mpa)Elongtion (%)0.2-0.3110-1459510.301-0.5110-1459520.51-1.5110-1459531.51-4.0110-145955 Features - Flat mill finished surface. - Without oxidation and scratch. - High quaity and the best service.- High formability, conductivity and weld-ability Applications Our 1100 coated aluminum coil are widely used for building decoration, such as ACM, wall panel, aluminum sandwich panel, honeycomb panels and aluminum roofing, lighting decoration. Ordering & Packing  Essential info for inquiry: alloy & temper, sizes, coating requirements, end usage  MOQ for 1100 coated aluminum coil: 5 MT per spec  Packaging:   Inner Core: Paper Tube  Outer: Paperboard  Wooden Pallet
5052 coated aluminum sheet 5052 coated aluminum sheet is stronger than 1100 and 3003 and it is an excellent candidate for most processing techniques. Mirach Coating's 5052 coated aluminum sheet has good workability and high fatigue strength with good resistance to correction even in salt water. Besides, it can be anodized to improve correction resistance of the material in corrosive environment. â?º Advantages: 1.Excellent stability and durability; 2.With high quality anodising ability; 3.Have high safety performance, combined with the medium strength and excellent corrosion. â?º Capacity & Availability â?? AA 5052 H32/H34/H38/H111/H112/H114 â?? Thickness: 0.08~6.0 mm (normally 1.0~3.0 mm, tolerance ±3%) â?? Max coating width for 5052 coated aluminum sheet: 2600 mm â?? Coated colors: RAL, NCS, Pantone etc. or on request â?? Coating type: PE (polyester) coating, PVDF coating, Nano PVDF coating, FEVE coating â?? 5052 coated aluminum sheet paint brands: Normally PPG and Beckers, and other brands available as requested â?? Color coating guarantee for 5052 coated aluminum sheet: 15~20 years guarantee â?? Treatment before coating: Chromate treatment, the film of Chromate should within 200~1300mg/m2 â?? Anti-abrade: abrasion coefficientâ?¥1.6L/um after sand trail
Nano Aluminum Composite Panel Construction and Decoration Material Aluminum Composite Panel Aluminum Composite panel(ACP) 1. Standard: according to GB/T 17748-1999 standard 2. Material: a) Front: aluminum alloy sheet coated with fluoro-carbon resin (PVDF) and polyester resin (PE) roasting painting b) Core: nontoxic polyethylene. c) Back: aluminum alloy sheet coated with polyester resin painting d) Surface finish: treated with PVDF and PE resin rolling roasting . coating e) Surface coating thickness: 30um f ) Aluminum alloy sheet thickness: 0.1mm, 0.12mm, 0.15mm, 0.2mm, 0.3mm, 0.4mm, 0.45mm, 0.5mm 3. Dimensions: a) Thickness: 3mm, 4mm b) Width: 1220mm 1500mm.. c) Length: 2440mm, 3200mm, 4000mm,5000mm (max: 6 meter) d) Weight: 5.5kg/sqm based on 4mm thickness. e) Standard size: 1220 x 2440mm f) Nonstandard sizes are available according to requirement of customers 4. Application scope: 1) Building exterior curtain walls.. 2) Decoration and renovation additions for old buildings 3) Decoration of interior walls, ceilings, bathrooms, kitchens and balconies 4) Shop door decorations 5) Advertisement board display platforms and signboards 6) Wallboards and ceilings for tunnels.. 7) Industrial materials, materials for vehicles and boats More information you can view here.
Nano Aluminum Composite Panel Construction and Decoration Material Aluminum Composite Panel Aluminum Composite panel(ACP)  1. Standard: according to GB/T 17748-1999 standard  2. Material: a) Front: aluminum alloy sheet coated with fluoro-carbon resin  (PVDF) and polyester resin (PE) roasting painting b) Core: nontoxic polyethylene. c) Back: aluminum alloy sheet coated with polyester resin painting d) Surface finish: treated with PVDF and PE resin rolling roasting .  coating e) Surface coating thickness: 30um f ) Aluminum alloy sheet thickness: 0.1mm, 0.12mm, 0.15mm, 0.2mm, 0.3mm, 0.4mm, 0.45mm, 0.5mm  3. Dimensions: a) Thickness: 3mm, 4mm b) Width: 1220mm 1500mm.. c) Length: 2440mm, 3200mm, 4000mm,5000mm (max: 6 meter) d) Weight: 5.5kg/sqm based on 4mm thickness. e) Standard size: 1220 x 2440mm f) Nonstandard sizes are available according to requirement of customers  4. Application scope: 1) Building exterior curtain walls.. 2) Decoration and renovation additions for old buildings 3) Decoration of interior walls, ceilings, bathrooms, kitchens and balconies 4) Shop door decorations 5) Advertisement board display platforms and signboards 6) Wallboards and ceilings for tunnels.. 7) Industrial materials, materials for vehicles and boats More information you can view here.
Product Description Pearl Red 5mm Dibond exterior aluminum facade panels 1. Specifications: Thickness: 1mm, 2.5mm, 3mm, 4mm, 5mm, 6mm (3mm and 4mm are most popular). Length: 2, 440mm (Max. Length: Unlimited) Width: 1, 220mm (Max. Width: 6000mm) Weight: 5.5-6kg/sqm baesd on 4mm thickness Thickness of aluminum foil: 0.15mm, 0.18mm, 0.21mm, 0.30mm, 0.35mm, 0.40mm, 0.5mm Qty/20'FCL: 4mm/4000qm, Qty/20'FCL: 3mm/4500sqm Colors: Silver, flash silver, gold, flash gold, white, red, black, marble design, wooden design, golden mirrior, silver mirror, brushed panel etc. (as requirements). 2. Procduct structure composed: 1) Protective film 2) Coating-basic level(PVDF or polyester) 3) Ground coating 4) Aluminum Alloy sheet 5) Macromolecule adhesive 6) Polyethylene 7) Macromolecule adhesive 8) Aluminum Alloy sheet 9) Ground coating 3. Materials: 1) Front side: Aluminum roll coated with PVDF or polyester 2) Core: Plastic( or fireproof) materials 3) Rear side: Aluminum coated with polyester or as requested 4. Features: 1)Excellent fireproof property 2)Super peeling strength 3)Perfect cold resistance performance 4)Excellent surface flatness and smoothness 5)Superior weather, corrosion, pollutant resistance 6)Even coating, various colors 7)Superior impact resistance 8)Lightweight and easy to process 9)Easy to maintain
CQB15-15-65F fluoroplastic magnetic pump is a new product in recent years. It has introduced foreign advanced technology and is made of polyvinylidene fluoride (PVDF). This material is an excellent anti-corrosion material in the world. The magnetic pump produced with this material has the advantages of wide application range, strong corrosion resistance, high mechanical strength, no aging, no toxin decomposition, etc. It can be widely used in chemical industry, pharmacy, electroplating, petroleum, environmental protection, rare earth separation, smelting, pickling in automobile manufacturing and other fields. CQB-F fluoroplastic magnetic pump has a unique design, no mechanical shaft seal is required, and no leakage is allowed. The liquid flow passage parts are made of fluoroplastic, ceramic fluororubber and other materials. The pump shell is fixed with metal materials, so the pump body is enough to support the weight of the pipeline, and is convenient for use and maintenance. Application of CQB-F fluoroplastic magnetic pump: CQB-F fluoroplastic magnetic pump is widely used in chemical industry, acid making, alkali making, smelting, rare earth, pesticide, dye, medicine, paper making, electroplating, pickling and electrolysis, radio, chemical foil, scientific research institutions, national defense industry and other industries to transport acid, alkali, oil, toxic liquid, rare and precious liquid, volatile chemical medium of any concentration. Especially the transportation of leaky, flammable and explosive liquids. Applicable temperature
parameter description Is it in stock: Yes Certification: ROHS, UL, REACH Material: Polyvinyl chloride PVC Processing method: Extrusion Type: Thermoplastic Model: PVC-MSH-015 Size: 0.15 Brand: Dan Mason Packing: Carton or stretch film Color: Double Sided Matte Black Yield: 100000000 Â detailed introduction Matte black PVC film sheet roll PVC membrane PVC (polyester fiber type) membrane material Classification According to the intensity level, it is divided into grades Explain that the fabric substrate of PVC film material should be polyester and polyamide fiber fabrics. The coating is mainly polyvinyl chloride (PVC) resin, and the weight of different coatings should be between 400 and 1500g/m2 according to functional requirements. PVDF), polypropylene resin (ACRYLIC), silicone resin, etc., and should have the function of improving the self-cleaning and anti-aging properties of PVC film materials. The thickness of the PVC film material should be greater than 0.5mm. The surface layer should have stable anti-corrosion and anti-ultraviolet erosion capabilities during the shelf life, and should have self-cleaning properties. Selection points 1) The surface layer of the PVC film material should have stable anti-corrosion and anti-ultraviolet erosion capabilities during the shelf life, and the surface should have self-cleaning properties. 2) After the PVC film material reaches the melting point in the fire environment, a melting hole will appear, and the boundary of the melting hole will burn and spread, but no open fire will be generated. According to my country's GB8624 "Classification Method of Combustion Performance of Building Materials", it is designated as B1 grade flame-retardant material.
"Mat black PVC film sheet roll PVC-MSH-015" parameter description Is it in stock: Yes Certification: ROHS, UL, REACH Material: Polyvinyl chloride PVC Processing method: Extrusion Type: Thermoplastic Model: PVC-MSH-015 Size: 0.15 Brand: Dan Mason Packing: Carton or stretch film Color: Double Sided Matte Black Yield: 100000000 "Mat black PVC film sheet roll PVC-MSH-015" detailed introduction Matte black PVC film sheet roll PVC membrane PVC (polyester fiber type) membrane material Classification According to the intensity level, it is divided into grades Explain that the fabric substrate of PVC film material should be polyester and polyamide fiber fabrics. The coating is mainly polyvinyl chloride (PVC) resin, and the weight of different coatings should be between 400 and 1500g/m2 according to functional requirements. PVDF), polypropylene resin (ACRYLIC), silicone resin, etc., and should have the function of improving the self-cleaning and anti-aging properties of PVC film materials. The thickness of the PVC film material should be greater than 0.5mm. The surface layer should have stable anti-corrosion and anti-ultraviolet erosion capabilities during the shelf life, and should have self-cleaning properties. Selection points 1) The surface layer of the PVC film material should have stable anti-corrosion and anti-ultraviolet erosion capabilities during the shelf life, and the surface should have self-cleaning properties. 2) After the PVC film material reaches the melting point in the fire environment, a melting hole will appear, and the boundary of the melting hole will burn and spread, but no open fire will be generated. According to my country's GB8624 "Classification Method of Combustion Performance of Building Materials", it is designated as B1 grade flame retardant material.
Industry Aluminum Extrusion Profile 40mm x 40mm Length 6000mm From China 1. Aluminum Extrusion Introduction Shape: Square Temper: T3-T8 Alloy: Aluminum Alloy Alloying Ingredient: 6063 Polished Aluminum Profile: Mechanical Polishing Origin: Suzhou Type: Window & Door Aluminium Profile, Decoration Aluminium Profile, Glass Wall Aluminium Profile, Industrial Aluminium Profile Grade: 6000 Series Window & Door Aluminium Pr ofile: OEM Surface Finishing: Electrophoretic Coating Certification: ISO Specification: 40x40mm HS Code: 7616999000 2. Product function introduction Item Customized Aluminum Industrial Profile Material Alloy 6063, 6061,6005 or according to customer's choice Temper T3, T4, T5, T6 Surface Anodize (clear, satin, bronze, black, golden, silver, other multi color) , electrophoresis, powder coating, PVDF coating, wood grain painting, etc. MOQ 5 ton. Usually 12 tons for a 20 feet container; 24 tons for a 40 feet container. Profile type Industry Aluminum profile used in cars, trains machinery ,trailers ,electronics, medical and other industrial filed . Machining High-precision machining 1. milling; 2. Drilling; 3. Bending; 4. Cutting ... Moulding 1. Using our moulds, free; 2. Using customerâ?? s drawing, mould fee need to be paid . Standard Our Industrial Aluminium Profile Meet the China national standard GB/T5237-2004, GB/T6892-2000 FOB Port Shanghai port
