Features for the Champion 100416 - Generator Tri-Fuel Technology Your 8000-watt portable generator operates on natural gas, propane, or gasoline, plus natural gas and propane hoses are included so the unit is ready to run on any fuel right out of the box. Electric Start Power up the 459cc Champion engine with the handy rocker switch, battery included. Intelligauge with CO Shield�® rack voltage, frequency, session run time, and total run time to monitor output and track maintenance intervals, plus the UL-recognized sensor uses an LED to indicate CO shutoff or fault. Powerful Gasoline: 10,000 starting watts and 8000 running watts, propane: 9000 starting watts and 7200 running watts, natural gas: 8750 starting watts and 7000 running watts and engine oil is included. SPECIFICATIONS Portable Generator Technology : Tri Fuel, CO Shield Gasoline Starting Watts: 10000W Gasoline Running Watts: 8000W Propane Starting Watts: 9000W Propane Running Watts: 7200W Natural Gas Starting Watts: 8750W Natural Gas Running Watts: 7000W Gasoline Starting Amps at 120V: 83.3A Gasoline Starting Amps at 240V: 41.7A Gasoline Running Amps at 120V: 66.7A Gasoline Running Amps at 240V: 33.3A Propane Starting Amps at 120V: 75A Propane Starting Amps at 240V: 37.5A Propane Running Amps at 120V: 60A Propane Running Amps at 240V: 30A Natural Gas Starting Amps at 120V: 72.9A Natural Gas Starting Amps at 240V: 36.5A Natural Gas Running Amps at 120V: 58.3A Natural Gas Running Amps at 240V: 29.2A Volts: 120/240 Frequency: 60Hz Outlets: GFCI 120V 20A Duplex (5-20R) (2), 120V 30A Locking (L5-30R), 120/240V 30A (L14-30R) GFCI Outlets: Yes Covered Outlets: Yes Covered Circuit Breakers: Yes Gasoline Run Time at 1/2 Load: 12.5 h. Propane Run Time at 1/2 Load: 5 h. Noise Level: 74 dBA Parallel Capability: No DC Operation: No Voltmeter: Intelligauge Automatic Voltage Regulation: No Battery: Yes Start Type: Recoil, Electric Engine Brand: Champion Engine Size: 459cc Engine Type: 4-stroke Engine Speed: 3600 Fuel Type: Gasoline, Propane (LPG), Natural Gas (NG) Fuel Gauge: Yes Gasoline Capacity: 8.5 gal. Gasoline Tank Material: Steel Engine Oil Type: 10W-30 Engine Oil Capacity: 1.1 qt. Engine Oil Included: Yes Low Oil Shut-Off: Yes Wheels: Yes Wheel Type: Solid Wheel Diameter: 10 in. PGMA G300-2018 Compliant: Yes EPA Certified: Yes CARB Compliant: Yes DIMENSIONS Length: 27.6 in. Width: 28.2 in. Height: 26.0 in. Weight: 207.0 lb.
Contract length One Year Commodity Copper Cathodes Purity 9999 Cu Form Electrolytic Origin Republic of Zambia Quantity 61000MT Sixty One Thousand Metric Tons First shipment 1000 MT One Thousand Metric Tons Monthly shipment 5000 MT Five Thousand Metric Tons Price Less 12 Twelve Per cent LME Price of the day Loading Port Dar Es Salaam Port Tanzania or Durban Port South Africa Discharge Port xxx xxxxxxxx Incoterms Strictly CIF Cost Insurance and Freight Delivery term Strictly CIF Cost Insurance and Freight Payment Terms Secured by SBLC MT 760 Operative Irrevocable Non Transferable Unconditional Confirmable Standby Letter of Credit MT 760 as Payment Guarantee and finally by Telegraphic Wire Transfer MT 103 After Final Inspection of Quality and Quantity by SGSCICC report at final destination port until Five 5 banking days Note No advance payment will be required by Seller or his representative as long as the SBLC MT 760 is in place and is in active Seller shall use his own resources to ship the copper cathodes to Buyers destination Refinery 1SPECIFICATIONS NONLME Electrolytic Copper Cathodes Grade A Purity Cu 9999 Maximum 9997 Minimum conforming to the LONDON METAL EXCHANGE LME specification Cathode Grade Designation Cu Cath 1 CHEMICAL COMPOSITION ON DRY BASIS PERCENTAGE IN WEIGHT Cu 9996 9999 Rejection below 9996 Sulphur Sppm 4 Cobalt Coppm 02 Iron Feppm 2 Arsenic Asppm 01 Silver Agppm 10 Bismuth B1ppm 01 Lead Pbppm 02 Manganese Mnppm 01 Nickel Nippm 02 Tellurium Teppm 005 Selenium Seppm 03 Aluminium Alppm 05 Antimony Sbppm 01 Magnesium Mgppm 04 Silica Sippm 03 Zinc Znppm 04 2MEASUREMENT 914 mm x 914 mm x 12 mm LME Standards App 36 X36X05 Weight of each sheet 125 Kilograms Approximately 2 Net weight of each pallet 2000 Kilograms Approximately 2 Net weight per container 200 Metric Tons Approximately 2 Gross weight per container 222 Metric Tons Approximately 2 3 PACKING Palletised Aluminium banded Bundles of bare unsoiled nonoxidized Copper Cathode plates and banded by aluminium bands suitable for long distance transportation and well protected against scattering shock and rust Net weight of each bundle 25MT 1 No wooden packaging allowed 4PRICE AND PAYMENT GUARANTEE PROCEDURE Value of SBLC MT 760 shall be equivalent to one 1 month shipment value with a validity period of One Year and One Day Rolls and Extensions Both parties understand and agree that SBLC via MT 760 shall be issued only from one of the Top Prime Banks located in major cities of Middle east Western Europe Asia or US
SALIENT FEATURES SODALTECH manufactures various models and types of Machines, Equipment, Spare Parts needed mainly to manufacture Paper Pulp Moulded products generally made from Waste Boxes, Papers, Indian Pulp, Taiwan Pulp, Korean Pulp, Canada Pulp, China Pulp, Thailand Pulp, Indonesia Pulp, Southern Pulp etc, most of the Paper & Paper based Paper Waste can be recycled using SODALTECH Equipment. The production lines are simple to operate and maintain. It has high productivity, easy interchangeability of mould tooling, consumes less energy with less manufacturing cost, faster setting time etc, It can be upgraded to next higher level of production by adding less number of additional machines. Various models and ranges are available in Wet Moulding & Dry Moulding Process (Fine Moulding). The range of products that can be made are endless. Few examples are Egg Trays (30-cell) Egg Box/Carton (6-cell,10-cell, 12-cell, 6+6 â?? cell, 18 cell) Egg Carton of multi cavity sizes, Can Shell types, Apple Tray, Fruit Tray, Tomato Tray, Pear Tray, Orange Tray, Cup carriers used in fast food outlets (4 pack, 2 pack) Hospital and Medical Care products (like Bed Pan Sleeves, Male Urinal Bottle, Female Urinal Pots, Kidney Tray, Bowls) Nursery Pots, Seed Pots (Jiffy Pots), Industrial Packs (Packing Buffers) Electronic Products Packing Pads and Paper Trays, Tableware etc. Advantages of SODALTECH Paper Pulp Moulding Machines Machines Sophisticated yet easy to operate Rust protected solid steel construction Fast interchanging of moulds with dryer linking optionv User friendly control panel with low maintenance service system Low cost of production due to less power, space and labour Choice of end product colors Water proof products by using additives High and fast return on investment Range of Moulding Machines popular in market. BASIC MODEL EGG TRAY MACHINE :-This is used mainly for entry level or sampling purposes. The Machine will have basic requirements like Forming Mould & Transfer Mould, Vaccum Pulp, Water Separator etc. This can be on Wet Moulding (Wet Molding) or Dry Moulding (Fine Moulding) process.This model Machines are available to make Carboard Egg Trays, Carton Egg Trays, Disposable Pulp Tableware, Finery Pack, Fruit Tray, Cardboard Lids, Paper Based Packaging, Poultry Products, Trays, Quality Egg Trays, Quality Egg Boxes, Quality Table Wares, Thermoformed Fibre. The Basic Model Machines/Lines are available in following major ranges or as per the customer requirements. Fruit Tray Line Machines for Paper Based Packaging Pulp Moulding Production Lines for Industrial Packing Tableware Machines Tableware Equipments Quality Egg Tray Making Plant Quality Egg Box Making Machine Advanced Pulp Moulding Technology Disposable Pulp Tableware Production Lines Fine Pulp Molding System Pulp Male Urine Bottle Moulding Machine Pulp Tableware Line Tool and Die set Manufacturing Wet Type Pulp Moulding Machine
2.Technical parameters: 1. Box size in the laboratory: DL-120LA W1200 * D1000 * H500 (mm), Approximate dimensions: 2300 * 1300 * 1400mm, 2 standard temperatures, Laboratory temperature: nss acss 35 ± 1 /pass 50 ± 1 Pressure bucket humidity: nss acss 47 ± 1 /pass 63 ± 1 , Salt water temperature: 35 ± 1 It can be heated without water, 3 volumes, Laboratory capacity: 800L Salt water tank capacity: 40L, 4 compressed air, Compressed air pressure: 1.00 ± 0.01kgf/c 5 spray volume: 1.0-2.0ml/80c /h, 6 spray mode: continuous spray, timed spray, programmable spray, intermittent spray, demisting in the box, 7. Power supply: AC220V 50Hz/20A, 8. Material: The entire PVC board is made, and the salt spray testing machine adopts advanced three-dimensional reinforcement technology internally, with a strong and solid structure that never deforms. 9. Water adding method: An automatic water adding system is adopted, which has the function of automatically replenishing the water level when the water level is insufficient, and the test is not interrupted. 10. Nozzle: Precision glass nozzle, salt spray testing machine used for 4000 hours to ensure no crystal blockage. 11. Protection system: Equipped with dual over temperature protection and insufficient water level warning to ensure safe use. 12. Temperature controller: digital display, PID control, high stability platinum temperature probe, error 0.3 13. Heating method: The laboratory adopts direct steam heating method, which increases the temperature quickly and shortens the standby time of the salt spray testing machine. 14. The spray tower is equipped with two conical dispersers, which have the functions of guiding fog, adjusting fog volume, and even fog falling. 15. The pressure bucket adopts Henry's law to heat and humidify, and provide the humidity required by the salt spray testing machine laboratory. 16. Opening method: Pneumatic automatic opening is adopted, The salt spray testing machine is one of the "three prevention" (humid heat, salt spray, mold) testing equipment for artificial climate environments. It is an important salt spray testing equipment for studying the adaptability and reliability of various environments in industries such as machinery, national defense, light industry, electronics, light industry electronics, and instruments. This salt spray testing machine can perform neutral salt spray tests in accordance with GB/T2423.17 "Basic Environmental Testing Regulations for Electronic and Electrical Products - Test Ka: Salt Spray Test Method", and can also perform acetate spray tests. This salt spray tester complies with CNS, ASTM, JIS and ISO standards. The salt spray test is to test the corrosion resistance of the products after coating, electroplating, Anodizing, anti-rust oil and other anti-corrosion treatments on the surfaces of various materials.
Spectra Nova JA 256/80 AAA Print Head The Spectra Nova JA 256/80 AAA is a high performance, robust and reliable jetting assembly designed for a broad range of wide format printers at resolutions up to 450 dpi. Four electrically independent piezoelectric slices, each with 64 addressable channels, are combined to provide a total of 256 jets. The nozzles are arranged in a single line, at a 0.011 inch distance between nozzles. The fluid interface and electrical connection are at the top of the jetting assembly and several mounting configurations are possible. This jetting assembly contains serial-to-parallel converters for selecting which jets to fire; all jets can be fired simultaneously or individually. These Spectra heads are manufactured in the US and passed Dimatix Spectra US quality control tests to ensure the best durability. It carries a manufacturer product warranty. This is the original Vutek print head (number AA90268 and AA90513). Specifications : Technology: Piezo Electric Max. Resolution: 450 dpi Cal. Droplet Size: 80 pico litre Adj. Range for Droplet Size: 70-85 pico litre Tot. Amount of Nozzles: 256 Nozzle Spacing: 279 microns Nozzle Diameter: 52 microns Firing Frequency: 20 kHz Operating Temperature: up to 90�°C Ink Compatibility: Solvent, water-based and UV Inks Compatibility : Agfa Anapurna 100 Agfa Anapurna L Agfa Anapurna XL DGI PolaJet PS-2504 DGI PolaJet PS-3204 DGI PolaJet PS-3204D DGI PolaJet PS-3206D Dilli Neo Plus UVP-1606 Dilli Neo Plus UVP-1606W Dilli Neo Plus UVP-2506 Dilli Neo Plus UVP-2506W Eurotech Eagle S6 Eurotech Eagle S6�² Eurotech Eagle S8 Eurotech Eagle S8�² Eurotech Malakan Eurotech Mermaid Eurotech Pars HP Fresco 3200 HP Scitex FB7500 HP Scitex XP2100 (Expedio 3200) HP Scitex XP2300 HP Scitex XP2500 HP Scitex XP5100 (Expedio 5000) HP Scitex XP5300 (Expedio Revolution) HP Scitex XP5500 HP Tempo HP Tempo II UV Kornit 931DS Kornit Avalanche Kornit Avalanche DC Pro Kornit Thunder 932 Kornit Storm II Markem-Imaje 5800 Mutoh Cobra S100UV Mutoh Cobra S65UV Mutoh Osprey 102 Mutoh Osprey 130 Mutoh Osprey 75 Mutoh PJ-1624NX (Toucan 64 4c) Mutoh PJ-1626FE (Toucan Hybrid) Mutoh PJ-1626NX (Toucan 64 6c) Mutoh PJ-2216NX (Toucan 87) Teckwin TeckPro 320 Teckwin Teckpro H3200 Teckwin Teckpro H5000 Teckwin Teckpro S3200 Vutek UltraVu 150 Vutek UltraVu II 5330 DGI PolaJet PS-1804
Diesel en 590 10 ppm.
Diesel en 590 10 ppm.
En 590 10 ppm ulsd.
D6, En590, JP54 .Jet A1 AVIATION KEROSENE JET A-1 FOB: +$2-$6 1st Trial Shipment: 2,000,000 BBLS 4,000,000 BBLS Monthly Shipment: 4,000,000 BBLS Destination Port: ASWP/Rotterdam/ Houston Commission Structure: Seller side CLOSED $1/2$- Buyer side OPENED $1/2$ GAS OIL EN 590 10 PPM FOB Price: +5/-10 1st Trial Shipment: 100,000 MT 200,000 MT Monthly Shipment: 200, 000 MT Destination Port: ASWP/Rotterdam/ Houston Commission Structure: Seller side CLOSED $5/$10 Buyer side OPENED $5/$10 TERMS AND CONDITIONS FOB TANK TO TANK 1) Buyer issue ICPO containing the seller's working procedure and banking details along with buyers nominated TSA, company registration certificate 2) Seller issues commercial invoice of the product in tanks at the port, buyer sign and return commercial invoice along with an acceptance letter. 3). Seller issue appointment letter for seller representative to present a fresh SGS Report of less than 24 hours to Buyers and buyers logistics for proper verification at the buyers Tank Terminal upon successful SGS verification seller inspect buyers Tank for injections 4) Upon confirmation of successful verification of SGS Report by Buyer company and buyers Tank Farm Company, Buyer should be issues 2 day TSR on supplier name of seller 5.Seller issue: a) IPA signed by buyers and buyers Tank Farm b) Authorization to sell and collect c) commitment to supply d) Statement of availabilities of product 6)Upon confirmation of the signed INJECTION PERMISSION AGREEMENT seller Issue to buyers a) Fresh SGS report of less than 24 hours on buyers company name b) Q&Q Report. And Injection Report. c) Authorization to verify physically the product in sellers tank (ATV) d) Tank Storage receipt TSR 7) Buyer conducts Dip test on the product in seller Tank and makes the payment for the total value of product via MT103-TT to enable the injection process into their Nominated tanks 8). Seller pays all intermediaries involved in the transaction and subsequently monthly shipments continue as per terms and conditions of the sales and purchase agreement contract between buyer and seller
AVIATION KEROSENE JET A-1 FOB: +$2-$6 1st Trial Shipment: 2,000,000 BBLS 4,000,000 BBLS Monthly Shipment: 4,000,000 BBLS Destination Port: ASWP/Rotterdam/ Houston Commission Structure: Seller side CLOSED $1/2$- Buyer side OPENED $1/2$ GAS OIL EN 590 10 PPM FOB Price: +5/-10 1st Trial Shipment: 100,000 MT 200,000 MT Monthly Shipment: 200, 000 MT Destination Port: ASWP/Rotterdam/ Houston Commission Structure: Seller side CLOSED $5/$10 Buyer side OPENED $5/$10
URGENT VOPAK TO VOPAK Dear team, Do you have a Vopak direct buyer for Jet A-1 in Houston? No ICPO is neededonly CIS. We agree to the procedures outlined below. Please also provide the tank farm manager's name, email address, and phone number. You do not need to provide the barcode or PIN numbersonly the manager's name, email, and phone number. JET FUEL A1 - 4,000,000 BBl PRICE: PLATTS -10/-8 NETT VOPAK PROCEDURES - HOUSTON The buyer must hold an account at Vopak or Kinder Morgan. For Tier 1 tank farm holders: 1. Buyer provides CIS only. 2. Exit buyer CIS and Letter of Authorization with the Tank Farm Managerâ??s name, email, and phone number. 3. Seller sends CI. 4. Seller provides UDTA at buyers expense. 5. Seller sends full POP. 6. The buyer, end buyer, and title holder will then arrange a Zoom meeting to finalize all logistics details and the contract. No need for an ICPO, only CIS. This is for Houston only and applies to 4M BBL. Can you please provide the details for points 1 and 2? No ICPO is required.
All type of rice basmati and non basmati rice 1121 basmati rice, 1509 basmati rice, sugandha rice, sarbati rice, sona mansoori rice, ir64 rice, swarna rice.Our top quality products and timely delivery make it possible for us to work with clients across the world. we export to more than 10 countries at present and are looking for a larger presence in the global market. lpg having uae office currently we are exporting to saudi arabia, uae, qatar, yemen, iraq, bahrain, jordan, oman, turkey, nepal
En590 diesel and jet a1, Aviation kerosene jet a 1, gas oil en 590 10 ppm .
Aloe vera, boswellia serrata, ginseng, gymnem, safed musli, shilajit extract, garcinia extract, curcumin extract 95%, pine bark 95%, saw palmetto 45%, salacia reticulata 15%, dha 10% ( veg ), omega 3 fatty acid, grape seed extract 95%.
FIBPRO 3X 50/50 steel fibres are designed specifically for the reinforcement of concrete, mortars and other cementitious mixes. FIBPRO 3X 50/50 is a low carbon wire deformed with hooked ends to provide optimum performance within the concrete mix. FIBPRO 3X 50/50 steel fibres are European Standard EN 14889-1:2006 compliant and have been specifically designed to meet or exceed the defined performance requirements.
MARKCHEM MICRO SILCIA is composed of silicon dioxide (SiO2), collected from silicon metal and ferrosilicon. Micro Silica will react with the Calcium Hydroxide from the cement, which will form more of the Calcium Silicate hydrate, increasing the strength of the concrete. Using Micro Silica will also increase the durability of the concrete.
FIBPRO 3X steel fibres are designed specially for the reinforcement of concrete, mortars and other cementitious mixes. FIBPRO 3X is a low carbon wire deformed with hooked ends to provide optimum performance within the concrete mix. FIBPRO 3X steel fibers are European Standard EN 14889-1:2006 compliant and have been specifically designed to meet or exceed the defined performance requirements
Micro Steel Fibre Brass Coated High Carbon-Steel fibre used in High Performance densified concrete system. They are available in different diameter & length sizes. Applications : UHPC Concrete Railway Sleepers Manhole Covers Random fibre mix produces better matrix building
When fully annealed, melt extract stainless steel fibers are more pliable and ductile. They not only allow for more user-friendly than the stiff cut fibers, but also have better flow features. It is especially characterized by thermal shock resistance, steep thermal gradients resistance and mechanical shock resistance, minimizing damage and delaying failure caused by cracking. Thanks to their optimum aspect radio, rapid fiber separation during the mixing phase are better guaranteed. Gives its outstanding performance in thermal shock resistance, melt extract fibers are ideal for refractory concrete used in steel works and factories.
1. Steel Fiber 2. Micro Silica 3. Silica Fume 4. Concrete Admixture 5. Waterproofing 6. Floor Hardener 7. Micro Concrete 8. Accelerator 9. Resin Capsule 10. Cement Capsule 11. Tile Adhesive 12. Tile Grout 13. Tile Epoxy Grout 14. Brass Coated Steel Fiber .
