Stainless Steel Powder Sinter Filters Suppliers and Manufacturers

Product Introduction The stainless steel pleated filter cartridge is a type of filter cartridge that uses single or multiple layers of stainless steel woven mesh as the main filter material. The sealing surface of the filter element adopts an argon arc welding process, and the filter layer is processed by folding 3-5 layers of stainless steel mesh. The filter layer is supported and reinforced by two layers of mesh on the inside and outside, with the actual filtering layer in the middle. The seams are welded using argon arc welding to form a complete filter cartridge that does not leak or allow any medium to pass through. The filter material used is stainless steel woven mesh, which is made of stainless steel wire of different diameters woven to different mesh sizes. The pleating creates a larger surface area for the filter, allowing it to trap more particles and contaminants than a flat filter of the same size. Parameter: Material: SS304 or SS316 Filtration Accuracy: 1 - 200 microns Size: Customized Operating temperature:â?¤650â?? Features: Filtration efficiency: Pleated stainless steel filters offer high filtration efficiency due to their large surface area and multiple layers of mesh. They can remove a wide range of contaminants from liquids and gases, including particles, debris, and sediment. Durability: Stainless steel is highly durable and corrosion-resistant, making pleated stainless steel filters suitable for use in harsh environments, such as chemical processing plants and oil and gas refineries. Customization: Pleated stainless steel filters can be customized to meet specific filtration requirements. They can be designed with different sizes, shapes, and micron ratings to suit different applications. Temperature and pressure resistance: Stainless steel is capable of withstanding high temperatures and pressures, making pleated stainless steel filters ideal for use in a wide range of industrial applications. Reusability: Pleated stainless steel filters are reusable and can be cleaned and reused multiple times, making them a cost-effective and environmentally friendly filtration solution.

Product Introduction Stainless steel pleated filters cartridge is a type offilter elementthat is made from stainless steel and designed with a pleated structure. The pleats increase the surface area of the filter, which provides more capacity for capturing contaminants. Stainless steel pleated filter cartridge is known for their high strength, durability, and resistance to heat and corrosion. They are commonly used in industrial applications where high-performance filters are required for filtering fluids and gases. parameters Material:stainless steel304, 304L, 304HC, 316, 316L, 321, 430 or as per you request. Filter rating 1-300 microns Flow rate: 80-200l/min Working pressure:1.5 bar-250 bar Working medium:The common polymer industrial, included rubber, plastic, liquid emulsion,etc. Working temperature: 600 Features 1. High Strength Against High Differential Pressures 2. Large Surface and Filtration Area 3. Washable and Reusable 4. Excellent Heat and Corrosion Resistance

Product Introduction The Porous Powder Metal SS 316L Cap-type Filter is a type of metal porous filter that is made from stainless steel 304, 304L, 316, or 316L powder. The filter is produced using a process that involves sizing, molding, and the raw materials. The use of stainless steel in the filter´s construction results in it being referred to as a stainless steel powder filter element. In addition to the cap-type filter, the Porous Powder Metal SS 316L Filter can be manufactured as tube-type and plate-type filters. These filters are extensively used in several industries, such as medical, chemical, and metallurgical industries, as well as in gas purification applications. This is due to their excellent permeability, filter fitness, and high stock utilization. The filter´s good permeability allows for the smooth flow of fluids or gases through it, while its filter fitness ensures that it can effectively remove contaminants and impurities from the fluid or gas passing through it. The filter´s high stock utilization results in it being able to operate for an extended period before needing replacement, making it cost-effective for industrial applications. Parameter Material: SS 316L Type: cap-type Filter Size: can be produced according to your drawings and requirements Filter accuracy: 5-100micron Density: from 5.5 to 6.5 Feature 1. Create a self-supporting structure that is suitable for extreme forces. 2. Especially beneficial characteristics when subjected to compression, vibration, changing circumstances, or with strong abrupt pressure peaks. 3. High thermal stability and resilience to heat. 4. Defined permeability and filtering qualities because of the precise and uniform pore size and distribution. 5. Backflushing and simple cleaning using ultrasonic or superheated steam. 6. You can weld and manufacture a range of metal materials. Application 1. Gas and liquid filtration 2. Solid catalyst recovery 3. Filtration of slurry oil and other petrochemical products 4. High-temperature gas filtration 5. Fluidization 6. Powder conveying 7. Sparging and other applications in various industrial fields

The stainless steel pleated filter cartridge is a type of filter cartridge that uses single or multiple layers of stainless steel woven mesh as the main filter material. The sealing surface of the filter element adopts an argon arc welding process, and the filter layer is processed by folding 3-5 layers of stainless steel mesh. The filter layer is supported and reinforced by two layers of mesh on the inside and outside, with the actual filtering layer in the middle. The seams are welded using argon arc welding to form a complete filter cartridge that does not leak or allow any medium to pass through. The filter material used is stainless steel woven mesh, which is made of stainless steel wire of different diameters woven to different mesh sizes. The pleating creates a larger surface area for the filter, allowing it to trap more particles and contaminants than a flat filter of the same size. Parameter: Material: SS304 or SS316 Filtration Accuracy: 1 - 200 microns Size: Customized Operating temperature: 650 Features: Filtration efficiency: Pleated stainless steel filters offer high filtration efficiency due to their large surface area and multiple layers of mesh. They can remove a wide range of contaminants from liquids and gases, including particles, debris, and sediment. Durability: Stainless steel is highly durable and corrosion-resistant, making pleated stainless steel filters suitable for use in harsh environments, such as chemical processing plants and oil and gas refineries. Customization: Pleated stainless steel filters can be customized to meet specific filtration requirements. They can be designed with different sizes, shapes, and micron ratings to suit different applications. Temperature and pressure resistance: Stainless steel is capable of withstanding high temperatures and pressures, making pleated stainless steel filters ideal for use in a wide range of industrial applications. Reusability: Pleated stainless steel filters are reusable and can be cleaned and reused multiple times, making them a cost-effective and environmentally friendly filtration solution. Applications: Oil and gas industry: Pleated stainless steel filters are used to remove contaminants from oil and gas during production, refining, and transportation. Food and beverage industry: Pleated stainless steel filters are used to filter liquids and gases in food and beverage production, ensuring product quality and safety. Chemical processing industry: Pleated stainless steel filters are used to remove contaminants from chemicals and solvents during production and processing. Pharmaceutical industry: Pleated stainless steel filters are used to filter liquids and gases in pharmaceutical production, ensuring high product purity and quality. Water treatment industry: Pleated stainless steel filters are used to remove contaminants from water in water treatment plants and other applications.

The stainless steel filter element is a kind of filter material with high strength and overall rigidity, which is made of multi-layer metal sintered mesh, which is made of multi-layer stainless steel mesh after special laminated pressing and vacuum sintering. The pores are interlaced to form a uniform and ideal filtration structure. The stainless steel pleated filter element is folded by special stainless steel wire mesh. The pleated process makes the filter element have a large filtration area, high dirt holding capacity and high flow rate. Each seal adopts argon arc welding process, no leakage, and can be used in high temperature and high pressure filtration environment. The stainless steel filter element has excellent performance, and the filter element can be cleaned repeatedly. Products Parameters Main filter material: SS316 SS304 SS316L SS304L Main filter media: stainless steel fiber sintered felt and stainless steel woven mesh Regular outer diameter: 25 30 35 50 60 63.5 65 100 150mm (customized) Regular inner diameter: 25 30 35 50 100 150mm (customized) Length: Generally 5", 10", 20", 30", 40" (customized) Interface form: 222 226 215 M36 M28 M24 M22 M20 threaded interface Maximum working temperature: 500 Filtration accuracy: 1-200um Working strength: 0.1-30MPa Processing: The sealing surfaces of the filter element are joined by argon arc welding process, and the filter layer adopts multi-fold folding process to form a complete filter element without leakage and medium shedding. Features 1. The precision filter element made of stainless steel has high porosity, excellent air permeability, low resistance, and low pressure difference; 2. The stainless steel precision filter element's filter area and dirt-holding capability are both substantial after folding; 3. The high temperature resistance, corrosion resistance, and suitability of the stainless steel precision filter element for high viscosity liquid filtering; 4.Effective renewal; 5.All-stainless steel construction; broad chemical compatibility; 6.6. Reusable after chemical, high temperature, and ultrasonic cleaning. Applications Environmental protection, petroleum, chemical, medical, high temperature gas filtration, scientific research, metallurgy, food, machinery, and other sectors use stainless steel pleated filter elements extensively. 1. Filtration of various high temperature and corrosive liquids in the petroleum and chemical sectors; 2. Filtration and purification of various polymer melts in the chemical fiber and film industries; 3. Thorough filtration for mechanical equipment of different hydraulic oils and lubricating oils; 4. In the pharmaceutical, biological, beverage, and other sectors, the clarification and filtration of various liquids.

Product Introduction Metal powder serves as the only raw material for the sintered metal powder filter; no binders are used. It is generated by cold isostatic pressing and then sinters at high temperatures. By adjusting the process parameters and metal powder particle size, the pore size and distribution of the component can be changed. Utilize the pore structure, material composition, compressive strength, and other characteristics of different filter materials to develop filter products suitable for users. When the filter cake on the surface of the sintered metal powder filter element reaches a certain thickness, due to its high-strength performance characteristics, by backwashing or backflushing the filter element under a specific reverse pressure, the filter element can be cleaned and reused. Product parameters Material: stainless steel powder, brass powder, titanium powder Diameter: Length: 5 inches (125mm) 10 inches (250mm) 12 inches (300mm) 20 inches (500mm) 30 inches (750mm) 40 inches (1000mm) Interface form: M20 M30 222 226 Filtration accuracy: 0.45 micron 1 micron 3 microns 5 microns 10 microns 20 microns 30 microns 50 microns 80 microns 100 microns

Stainless steel pleated filters cartridge is a type of filter element that is made from stainless steel and designed with a pleated structure. The pleats increase the surface area of the filter, which provides more capacity for capturing contaminants.  Stainless steel pleated filter cartridge is known for their high strength, durability, and resistance to heat and corrosion. They are commonly used in industrial applications where high-performance filters are required for filtering fluids and gases.  parameters Material:stainless steel304, 304L, 304HC, 316, 316L, 321, 430 or as per you request. Filter rating 1-300 microns Flow rate: 80-200l/min Working pressure:1.5 bar-250 bar Working medium:The common polymer industrial, included rubber, plastic, liquid emulsion,etc. Working temperature: 600 Features 1.High Strength Against High Differential Pressures: These filters can withstand high differential pressures without loss of their filtration efficiency or structural integrity. 2.Large Surface and Filtration Area: The pleated design of these filters results in more pleats in the stainless steel filter, which means a larger surface and filtration area. This provides a greater ability to capture contaminants. 3.Washable and Reusable: The stainless steel filter element is washable and reusable, which prolongs its service life and reduces the frequency of filter replacement. This saves money and reduces waste. 4.Excellent Heat and Corrosion Resistance: These filters are highly resistant to heat and corrosion, making them suitable for use in harsh environments where other filters may fail. Applications Oil and gas production: are used in the oil and gas industry to filter out contaminants from crude oil, natural gas, and other fluids. Chemical processing: These filters are used in chemical processing to remove impurities from chemicals and solvents. Water treatment: are used in water treatment plants to remove sediment, debris, and other contaminants from the water supply. Food and beverage production: These filters are used in the food and beverage industry to filter out impurities and ensure product quality. Pharmaceutical production: are used in the pharmaceutical industry to filter out contaminants and ensure product purity. Automotive and aerospace industries: These filters are used in the automotive and aerospace industries to filter out contaminants from hydraulic fluid, lubricating oil, and other fluids used in machinery. Industrial air filtration: are used for industrial air filtration to remove dust, smoke, and other airborne contaminants from the air.

Product Introduction The stainless steel filter element is a kind of filter material with high strength and overall rigidity, which is made of multi-layer metal sintered mesh, which is made of multi-layer stainless steel mesh after special laminated pressing and vacuum sintering. The pores are interlaced to form a uniform and ideal filtration structure. The stainless steel pleated filter element is folded by special stainless steel wire mesh. The pleated process makes the filter element have a large filtration area, high dirt holding capacity, and high flow rate. Each seal adopts argon arc welding process, has no leakage, and can be used in high-temperature and high-pressure filtration environments. The stainless steel filter element has excellent performance, and the filter element can be cleaned repeatedly. Products Parameters Main filter material: Main filter media: stainless steel fiber sintered felt and stainless steel woven mesh Regular outer diameter: 150mm (customized) Regular inner diameter: Interface form: M20 threaded interface Maximum working temperature: 500 Filtration accuracy: 1-200um Working strength: 0.1-30MPa Features 1. The precision filter element made of stainless steel has high porosity, excellent air permeability, low resistance, and low-pressure difference; 2. The stainless steel precision filter element's filter area and dirt-holding capability are both substantial after folding; 3. The high-temperature resistance, corrosion resistance, and suitability of the stainless steel precision filter element for high viscosity liquid filtering; 4. Effective renewal. Applications Environmental protection, petroleum, chemical, medical, high-temperature gas filtration, scientific research, metallurgy, food, machinery, and other sectors use stainless steel pleated filter elements extensively. 1. Filtration of various high-temperature and corrosive liquids in the petroleum and chemical sectors; 2. Filtration and purification of various polymer melts in the chemical fiber and film industries; 3. Thorough filtration for mechanical equipment of different hydraulic oils and lubricating oils.

Stainless steel pleated filters are a type of filtration media made from stainless steel. These filters consist of multiple layers of stainless steel mesh that are pleated or folded to increase the filtration area. The pleated design allows for a larger surface area compared to flat filters, resulting in improved filtration efficiency and capacity. Stainless steel pleated filters offer several advantages due to the properties of stainless steel, such as corrosion resistance, high temperature resistance, and durability. They are commonly used in various industries, including petrochemical, pharmaceutical, food and beverage, water treatment, and industrial processes. The pleated structure of these filters provides an extended service life and lower pressure drop compared to other filter types. The pleats create a larger filtration surface, allowing for efficient removal of contaminants and particulate matter from fluids or gases. The stainless steel mesh construction ensures excellent mechanical strength and resistance to wear and tear. Specification: Size: 60*1000mm Filter precision: 2 micron Filtration Media: SS wire mesh and SS fiber Support Media: SS wire mesh Outer Cage: SS End Caps: DOE Bonding: Welded Features: 1. Filtration Efficiency: Stainless steel pleated filters offer high filtration efficiency due to their multiple layers of pleated stainless steel mesh. They effectively capture particles and contaminants of various sizes, ensuring reliable filtration performance. 2. Large Filtration Area: The pleated design of these filters provides a larger filtration area compared to flat filters. This increased surface area allows for improved particle capture and higher dirt-holding capacity, resulting in longer filter life and reduced maintenance frequency. 3. High Temperature Resistance: Stainless steel pleated filters can withstand high temperatures, making them suitable for filtration applications involving hot fluids or gases. They maintain their structural integrity and filtration performance even under elevated temperature conditions. 4. Mechanical Strength: Stainless steel pleated filters have excellent mechanical strength and durability. They can withstand high differential pressures without collapsing or deforming, ensuring reliable filtration performance and longer service life. 5. Easy Cleaning and Maintenance: Stainless steel pleated filters are relatively easy to clean and maintain. They can be cleaned using various methods, including backwashing, ultrasonic cleaning, or chemical cleaning, depending on the application and level of contamination. 6. Environmentally Friendly: Stainless steel pleated filters are reusable and washable, reducing the need for frequent filter replacements. This reusability makes them an environmentally friendly choice, reducing waste generation and overall environmental impact.

Multilayer Wire Mesh Filter Stainless Steel is a highly versatile and widely used filtration material that offers exceptional performance. With a total of 3 to 8 layers, typically consisting of 5 layers, this filter provides efficient filtration solutions. It is constructed using stainless steel wire woven or perforated into meshes, which are then vacuum sintered to form the Multilayer Wire Mesh Filter. The five layers of the Multilayer Wire Mesh Filter Stainless Steel include the protection layer, filtration control layer, dispersion layer, support skeleton layer, and skeleton layer. This design ensures optimal filtration efficiency and durability. The Multilayer Wire Mesh Filter Stainless Steel can be customized into various filter types, such as filter discs, filter tubes, and more. Specifications: - Material: Stainless steel wire 316L - Dia: 51mm. - Filtration accuracy: 10�¼m - Shape: cylinders - Connector: Customizable - Woven Type: Sintered Dutch woven wire mesh and sintered square woven wire mesh. Features: 1. High Filtration Efficiency: The multilayer design ensures effective particle retention and provides excellent filtration efficiency. 2. Durability: Made from high-quality stainless steel, this filter offers exceptional strength, corrosion resistance, and a long service life. 3. Easy Maintenance: The open structure of the wire mesh facilitates easy cleaning, backwashing, and replacement when necessary. 4. Versatility: Suitable for a wide range of applications, including liquid filtration, gas filtration, hydraulic systems, oil refining, chemical processing, and more. 5. Customizable: Can be tailored to meet specific filtration requirements, including size, micron rating, and shape. Applications: - Petrochemical Industry: Used for oil and gas filtration, catalyst recovery, and refining processes. - Food and Beverage Industry: Ensures product quality by removing impurities from liquids and gases during production. - Pharmaceutical Industry: Critical for sterile filtration in drug manufacturing and laboratory applications. - Water Treatment: Used in municipal and industrial water treatment systems to remove contaminants and improve water quality. - Automotive Industry: Essential for filtration in engine oil, fuel, and hydraulic systems, ensuring optimal performance and longevity. - Aerospace Industry: Employed in hydraulic and fuel systems to maintain cleanliness and prevent component damage.

A 316 stainless steel wire mesh filter ring refers to a filtration device made from 316-grade stainless steel wire mesh material in the form of a ring. Stainless steel wire mesh is a popular material choice for filters due to its durability, corrosion resistance, and excellent mechanical properties. The 316 stainless steel grade is specifically known for its enhanced resistance to corrosion, particularly in environments containing chlorides, such as saltwater or marine applications. This makes it suitable for various industries where filtration is required, including chemical processing, oil and gas, food and beverage, pharmaceuticals, and wastewater treatment. Specifications Wire materials: SUS316L Wire diameters: 0.5 mm Diameters: 60mm Length: 50mm Weaving methods: plain weave Layer: multiple five layers Filtration precision: 100 �µm Features Physical Properties: The 316 stainless steel sintered wire mesh filter ring exhibits several outstanding physical properties, including high tensile strength, high dirt holding capacity, high strength, resistance to high pressure, precise filtering accuracy, resistance to wear, excellent abrasion resistance, and high temperature resistance. Chemical Properties: This filter ring demonstrates excellent chemical properties, with acid resistance, alkali resistance, and corrosion resistance. Process Properties: The filter ring has a controlled and uniform porosity, long service life, precision-punched without burrs, compatibility with most fluids, weldability, ease of installation and removal, and it can be easily cleaned and reused. Applications Oil and Gas: The oil and gas industry effectively employs diffusion-bonded metal wire mesh to prevent sand in various types of formation sands and for various gravel packing applications. Fluidization: Sintered wire mesh is used to fluidize bulk powders and solids under the most challenging conditions, such as extreme temperatures and highly corrosive environments. Power Generation: Diffusion-bonded wire mesh maximizes the performance of power generation filtration systems, suitable for applications like reactor water purification and fuel pool purification. It also helps reduce operational costs for condensate water filters and polishing systems. General Industry: General industry applications of sintered wire mesh include catalyst recovery, steam filtration, polymer filtration, desalination, and more.

The stainless steel micron wire mesh filter tube is a filter element made primarily of 304 or 316 stainless steel wire mesh. It is manufactured using stainless steel wire mesh woven in various mesh shapes to achieve the desired filtration grade. The stainless steel wire mesh filter tube has uniform surface filtration performance and employs multi-layered sintered stainless steel mesh as the main filter material. The mesh has interlaced pores, making it resistant to high temperatures, sudden temperature changes, and corrosion, making it suitable for various corrosive media such as acids and alkalis. The stainless steel micron wire mesh filter tube is a filter element with extremely high compressive strength, making it suitable for filtration applications where high-pressure fluids flow. Due to the inherent advantages of stainless steel filter cartridges, they can be easily customized to meet specific material, strength, flow rate requirements, thickness, micron rating, and environmental conditions. Parameters Diameter: 20 mm Wall Thickness: 2 mm Operating Temperature: 600 C Filtration Precision: 100 microns Connections: Open on both ends Features High Pressure Differential: It is a filter element with high pressure resistance, commonly used in high-pressure fluid filtration applications to ensure long-term operation of equipment in high-pressure pipelines. High Temperature Resistance: Stainless steel material can withstand prolonged operation at high temperatures. While other materials may deform under high temperatures, stainless steel filter cartridges remain stable. Cleanable: The material is stainless steel, which is easy to clean and reuse. Cleaning the equipment involves removing impurities and reinstalling it for further operations. It allows for fluid backwashing, ensuring no residual contaminants on the surface of the stainless steel filter cartridge. Long Lifespan: The filter element has certain corrosion resistance and a longer service life. Its corrosion resistance makes it an ideal filtration element for preventing secondary contamination of fluids. Customizable Sizes: It comes in different sizes to be used in a wide range of industrial applications. Different sizes can easily adapt to different types of equipment. It also offers different sealing rings or gasket attachments for various applications. Stable Aperture: The filtration medium has a fixed pore structure, preventing contaminated particles from returning to the clean fluid. The absolute rated value of the pores provides consistent and reliable fluid filtration, improving filtration efficiency.

20 Micron Round Stainless Steel Filter Screen Disc is a type of filter made from interconnected networks of pores in a sintered metal structure. These filters are designed to trap solid particles in gas or liquid flow streams, making them excellent depth filters. One advantage of these filters is their superior mechanical strength, which makes them highly durable and resistant to wear and vibration. Stainless Steel Type 316L is a common material used in the manufacture of sintered metal filters. This material is capable of withstanding temperatures of up to 750�°F (399�°C) in oxidizing environments and up to 900F (482C) in reducing environments. In addition, these filters can be cleaned using a variety of methods, including ultrasonic baths or reverse flow flushing. This makes them highly versatile and easy to maintain. For applications that require even greater resistance to corrosion, temperature, wear, and vibration, other nickel-based alloys are available. These alloys offer superior performance in harsh environments and can be tailored to meet specific application requirements. Overall, 20 Micron Round Stainless Steel Filter Screen Disc is a highly effective and versatile solution for a wide range of filtration applications. Parameter Material: SS 316L Thickness: 1.7mm Diameter: 100mm Pore size: 20 microns Layers: 5 layers

Product Introduction 20um 316L microporous stainless steel filter disc is a type of filter element used for the filtration of liquids and gases. The disc is made by molding and sintering stainless steel powder together to create a porous structure. The resulting structure has a high filtration efficiency and a narrow pore size distribution, which allows for efficient filtration of small particles and impurities. 20um 316L microporous stainless steel filter disc is a type of corrosion-resistant steel that contains molybdenum, which improves its resistance to corrosion and pitting. This makes it a good choice for applications where the filter element will be exposed to corrosive fluids or environments. Parameters Brand: TOPTITECH Material: 316L stainless steel Max pressure: 5MPa Max temperature: 600 degree Types:disc Diameter Size: 30 mm Height Size: 2mm Pore Size: stainless steel 20um Three important aspects of the filter Pore size: The pore size of the filter disc can be customized according to the specific application requirements. The pore size typically ranges from a few microns to several hundred microns. Filtration efficiency: The sintered porous stainless steel filter disc can achieve high filtration efficiency due to its uniform pore structure. It can effectively remove particles and impurities from liquids and gases, including bacteria, viruses, and other contaminants. Durability: The filter disc is made of durable stainless steel, which makes it highly resistant to corrosion and wear. It can withstand high temperatures, pressures, and aggressive chemicals without degrading over time. Application A. Solid gas separation J. Cooling B. Muffler, silencer K. Diffuse, evenly spread, or uniform gas, oil, or heat C. Air purification L. Breathable protection D. Filtering oil M. Pharmaceutical, medicine E. Dedusting, Isolation dust, dust proof N. Chemical F. Gas-oil dissociation O. Chemical fiber G. Gas liquid separation P. Filtration for high temperature environment H. Moisture proof Q. High pressure reverse wash filtering I. Heat insulation R. Acid and alkali corrosion environment filtering Package and Shipment 1. Sintered Filters are usually packed in cartons, wrapped in soft film, and fixed in a box filled with industrial foam cotton, and the outer baler is packed with plastic bags with no damage during transportation. 2. Wooden box export packaging can also be customized. The foam cotton can be filled and fixed, the external box is sealed, the bottom is specified, the whole packaging is processed, and the goods can be delivered to the customer�´s designated place without damage.