Lactobionic Acid Cas 96 82 2 Suppliers and Manufacturers

Diethylenetriamine pentamethylene phosphonate sodium is an organophosphorus series scale inhibitor. Its molecular formula is C9H28O15N3P5, and its relative molecular weight is 573.2. Diethylenetriamine pentamethylene phosphonate sodium is non-toxic, miscible with water, has better scale inhibition and corrosion inhibition effect, and has good temperature resistance, which can inhibit the formation of carbonate, sulfate and phosphate scale. Especially when the pH value is 10-11, calcium carbonate still has a good scale inhibition performance, and the scale inhibition effect at this time is 2 to 3 times higher than that of hydroxy-ethylenediphosphonic acid and amino trimethylenephosphonic acid. Another outstanding feature is that the combination with manganese ions has a good corrosion inhibition ability on carbon steel and copper alloys.

Pale yellow liquid at room temperature characteristic odor and taste or nearly odorless, free from rancidity or any objectionable odor and taste. Each batch of materials shall undergo strict sampling,inspection and screening for guaranteeing the affluent oil production and the excellent oil fragrance. Groundnut OIL Taste Neutral Impurities Negative Free Fatty Acid ( % ) max 0,10 Moisture ( % ) max 0,05 Peroxide Value ( meq O2/ kg ) max 5 Specific gravity at 20 degr C 0,91 - 0,93 Iodine value ( g / 100 g ) 82 - 110 Colour Lovibond 5 1/4 " Red max 2,5 Colour Lovibond 5 1/4 " Yellow max 25 C 12:0 C 14:0 (Myristic Acid) C 16:0 ( Palmitic Acid ) 6 - 14 C16:1 (Palmitoleic Acid) C 18:0 ( Stearic Acid ) 1 - 5 C 18:1 ( Oleic Acid ) 35 - 72 C 18:2 ( Linoleic Acid ) 13 - 44 C 18:3 ( Linolenic Acid )

ITO GLOBAL GRUOP, Sale Offer Carbon anode FC 90% -96% , clean , containers will be loaded full capacity. Our monthly supplying capacity 1000 ton 1-Carbon-95-97-% 2-Sulphur-0.95-% 3-Ash Content-1-% 4-V-M 0.30-% 5-Moisure 0.90-%

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

PRODUCT DATA SHEET ACID RESISTANT BRICK Material : FIRECLAY Type Acid Resistant Brick Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : * We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: * Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions - Heavy thermal shock Characteristic Fireclay Type Acid Resistant Brick - Test Standard Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20 Water Absorption, % - 0.1 to 1.8 ASTM C-20 Apparent Porosity, % - 4.05 to 4.14 ASTM C-20 Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279 Modulus of Rupture, Mpa - 14.6 ASTM C-67 Compressive Strength, PSI - 15500 to 17250 ASTM C-67 Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102 Surface Hardness, MOHS Scale - 7 Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236 Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103

Our offered range mainly includes refined edible oil, which is very healthy and is widely used for making various delicious dishes. Technical specifications: 1) Free fatty acid: 1-3% 2) Free fatty acid: 3-5% 3) Free fatty acid: 5-10% 4) Free fatty acid: 10-20% Palm Oil, Coconut Oil, Sunflower Oil, Soybean Oil

We offer Ammonium Nitrate in Granular and Crystalline forms. Ammonium Sulphate Physical State ; Powder Color : White crystalline powder Cas No. 7783-20-2 Arsenic (As) ; NMT 0.00002% Calcium (Ca) : NMT 0.001% Magnesium (Mg) : NMT 0.0005% Non-volatile substances : NMT 0.01% Active Ingredient ; (NH4)2SO4% Assay : Min 99.5% PH Value ; Min. 4.5 Chloride : NMT 0.0003% Nitrates : PNMT 0.001% Iron ; NMT 0.0002% Heavy Metals (as Pb) ; NMT 0.0002% Phosphate (PO4) ; NMT 0.0005% The primary use of Ammonium Sulphate is as a fertilizer for alkaline soils. In the soil the ammonium ion is released and forms a small amount of acid, lowering the pH balance of the soil, while contributing essential nitrogen for plant growth. The main disadvantage to the use of Ammonium Sulphate is its low nitrogen content relative to Ammonium Nitrate, which elevates transportation costs. It is also used as an agricultural spray adjuvant for water soluble insecticides, herbicides, and fungicides.

Sacha Inchi oil is a kind of edible oil extracted from Sacha Inchi. The oil does not contain any toxins and harmful substances. The content of unsaturated fatty acids is more than 90%, of which linolenic acid is 48%, linoleic acid is 35%, and oleic acid is 9%. Product Name: Sacha inchi oil Latin Name: Plukenetia volubilis Linneo Appearance: Light Yellow Oil Specification: 99% Part Used: Seed Application: Food Supplement Main Ingredient: Sacha inchi Shelf Life: 2 Years Packaging: 25kg/Drum

As Per Requirements Of Clients

Sodium Acetate Anyhdrous-99% Sodium Acetate Trihydrate Crystal-99% Packing: 25 Kg HDPE BAGS

Grade: 1. Carbon Black PL330J 2. Carbon Black PL330C 3. Carbon Black PL330C 4. Carbon Black PL550C 5. Carbon Black PL550B 6. Carbon Black PL550C 7. PL660B Beads 8. Carbon Black P330 9. Carbon Black P550 10. PL772B Beads Purity: 1.OAN (ml/100 gm) >90 2.OAN (ml/100 gm) >90 3.OAN (ml/100 gm) >95 4.OAN (ml/100 gm) >100 5.OAN (ml/100 gm) >100 6.OAN (ml/100 gm) >100 7.DBP No (OAN) (cc/100 gm) >100 8.DBP No (OAN) (cc/100 gm) >100 9.DBP No (OAN) (cc/100 gm) >105 10.DBP No (OAN) (cc/100 gm) >90 Actual price will be provided after your enquire.

1.Silica Quartz Ore Purity: 98% available 2.Silica Quartz Powder Purity: 99.9% available 3.Silica Lumps Purity: 99% available

Red Onion As per your required size and packing. CIF price depends on the order quantity and availability of vessels.

Magnesium Chloride Flakes (MGCL2.6H2O) Packing:25 Kg HDPE Bag As per the order quantity and availability of the vessel, we'll provide you CIF price.

Calcium Chloride Powder-74% CaCl2 92% CaCl2 94% We will provide the CIF price as per your order quantity.

Food Grade--94-96%

Animal Feed Grade:99% Industrial Grade--99% Food Grade--99%

Type: Cucumber. Preserved type: vinegar, brine. Acid: 0.35-0.55% (acetic acid). Salt: 2.4-2.6% (NaCl). Brix: 5.0-6.0%. Size (cm): 1-4; 2-5; 3-6; 6-9. Spices: celery, carrots, sugar, pepper, garlic or customer's formula. Packing: in jar of 720ml/1500ml, or in drum of 220 liters.

Packing: in Can 720 Ml and 1500 Ml Net Weight Ingerdients: Gherkins/ Cucumber, Carrot, Garlic, Dill, Sugar, Salts, Acid Acetic, Water Size of Gherkins: 3-6 Cm, 4-7 Cm, 6-9 Cm Shelf Life: 2 Years