Product Description The Si-901 glass coating agent is featured with superior performances of improving finish glossiness, water-repellency and anti-fouling properties Product Feature The Si-901 glass coating agent is featured with superior performances of improving finish glossiness, water-repellency and anti-fouling propertiesrecommended to combine with Si-901 practice to achieve premium coating overlay, which consolidate top-level 3D glass coating film whilst protecting vehicle finish with excellent and extended durability. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Product Specification / Models KISHO Si-901 [Specifications]1L,2L,4L,17L [Ingredients]SiO2 [Specifications]1L,2L,4L,17L [Dosage]One liter liquid construction 34 cars, each car was 30ml Application Si-811 glass coating agent, is featured with advantageous performances of enhancing finish glossiness, water repellency and anti-fouling, forming a genuine protective film to car paint. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Other Information Finish treatment before vehicle glass coating is dependent on finish conditions, and it is critical to the practice, for inferior treatment may influence the adhesiveness and basic performance of glass coating film, thus please determine whether it needs iron powder removal, grinding and polishing, and air gun blow-off procedures on basis of the finish conditions, but do note that degreasing is necessary.
Product Description Si-811 glass coating agent, is featured with advantageous performances of enhancing finish glossiness, water repellency and anti-fouling, forming a genuine protective film to car paint. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Product Feature Si-811 glass coating agent, is featured with advantageous performances of enhancing finish glossiness, water repellency and anti-fouling, forming a genuine protective film to car paint. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Product Specification / Models i-811 Kisho Glass Coating [Ingredients]SiO2 [Specifications]1L,2L,4L,17L Application Si-811 glass coating agent, is featured with advantageous performances of enhancing finish glossiness, water repellency and anti-fouling, forming a genuine protective film to car paint. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Other Information Finish treatment before vehicle glass coating is dependent on finish conditions, and it is critical to the practice, for inferior treatment may influence the adhesiveness and basic performance of glass coating film, thus please determine whether it needs iron powder removal, grinding and polishing, and air gun blow-off procedures on basis of the finish conditions, but do note that degreasing is necessary.
Product Description Si-811 glass coating agent, is featured with advantageous performances of enhancing finish glossiness, water repellency and anti-fouling, forming a genuine protective film to car paint. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Product Feature Si-811 glass coating agent, is featured with advantageous performances of enhancing finish glossiness, water repellency and anti-fouling, forming a genuine protective film to car paint. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Product Specification / Models 1. 1 Si-811 glass coating agent (30ml); 2. 1 X-03 protectant (30ml); 3. 1 Glass coating sponge; 4. 1 Manual Application Pre-practice treatment Finish treatment before vehicle glass coating is dependent on finish conditions, and it is critical to the practice, for inferior treatment may influence the adhesiveness and basic performance of glass coating film, thus please determine whether it needs iron powder removal, grinding and polishing, and air gun blow-off procedures on basis of the finish conditions, but do note that degreasing is necessary Other Information 1. This product is fast try, please avoid practice under burning sun, otherwise wiping would be impeded; 2. Avoid practice in temperature environment under 10; 3. Please carry out practice under complete cool-off state of the vehicle body, since vehicle body heat may expedite product hardening rate leading to wiping obstruction; 4. Please completely clear fouling attached on vehicle body and carry out degreasing before practice; 5. Please read practice manual in details and follow practice procedures therein
Product Description This product is fluoride-containing coating film product, used to smear on glass surface to form water repellency film to enhance glass self-cleanness, which can improve visibility in rainy weather and enhance safety driving. Product Feature This product is fluoride-containing coating film product, used to smear on glass surface to form water repellency film to enhance glass self-cleanness, which can improve visibility in rainy weather and enhance safety driving. Product Specification / Models 1. 5 G-01 window coating agents (20ml); 2. 5 Coating film sponges; 3. 5 Coating cloths; 4. 1 Manual. Application 1. Completely clear fouling and oil-film attached on window, and use a air gun to blow off moisture until it is completely dry; 2. Drip G-01 window coating agent on sponge wrapping the coating cloth for 7-10 drops, smear it on window uniformly with an alternating method of first lateral and then vertical; 3. Postpone for 5 min, then use a dry towel to wipe the window with polishing brightness to complete. Other Information 1. Avoid engaging water or rinsing the vehicle with 24 hours after practice. 2. This product is a mild irritant to skin, please wear protective gloves if allergic with its practice
Product Description Wiping-free fast-dry glass coating product, can increase wheel's brightness, extend durability, enhance water repellency, greatly enhance anti-fouling property and self-cleanliness, and reduce fouling attachment. Product Feature Wiping-free fast-dry glass coating product, can increase wheel's brightness, extend durability, enhance water repellency, greatly enhance anti-fouling property and self-cleanliness, and reduce fouling attachment. Product Specification / Models Kisho Si-02 Auto Wheel Coating [Ingredients] polysiloxane [Specifications] 1L,2L,4L,17L [Dosage] One liter liquid construction 100 cars, each car was 10ml Application Si-02 wheel glass coating practice method 1. Completely clear fouling attached on the wheel hub, and use a air gun to blow off moisture until it is completely dry; 2. Drip Si-02 wheel glass coating agent on coating cloth, and smear the wheel uniformly, notice not to smear repeatedly (repeated smearing leads to visible traces); 3. Keep still standing above 5 hours after smearing, or use a hot lamp or hot blast to expedite hardening rate of the glass coating film. Other Information 1. Avoid engaging water or rinsing the vehicle with 24 hours after practice. 2. This product is a mild irritant to skin, please wear protective gloves if allergic with its practice.
Product Description Main ingredient of X-03 protectant is silicone resin, featured with extremely strong adhesiveness to the glass coating film, which is astringent after practice whilst rendering super-strong water-repellency effectiveness. It not only excellently protects the glass coating film, but also prevents raindrop imprint by 90%, thus is a requisite maintenance product of coating practice Product Feature Main ingredient of X-03 protectant is silicone resin, featured with extremely strong adhesiveness to the glass coating film, which is astringent after practice whilst rendering super-strong water-repellency effectiveness. It not only excellently protects the glass coating film, but also prevents raindrop imprint by 90%, thus is a requisite maintenance product of coating practice Product Specification / Models BOTTLE:1L 5L 10L Application 1. Jiggle before practice, spray X-03 protectant on the finish, 4 to 5 times for half the hood.; 2. Use a dry towel to gently wipe in alternate lateral and vertical linearly, then use another dry towel to wipe with polishing brightness to complete; 3. It is recommended a practice of X-03 protectant for every 3-6 months of the vehicle to better protect the glass coating film. Notice: Do not use excessive quantity leading to nonuniform practice. Other Information 1. Avoid practice under burning sun; 2. Avoid practice in temperature environment under 10; 3. Please carry out practice under complete cool-off state of the vehicle body; 4. After glass coating practice, postpone for above 2 hours to exercise subsequent X-03 protectant practice; 5. Upon later maintenance after 3-6 months, please rinse the vehicle body clean and blow off the moisture using a air gun; 6. Please read practice manual in details and follow practice procedures therein.
Moisture content: 0.2% Film thickness:60-80um Angle of repose:36% Coating ratio:68%(40KV) Particle size:35-40um Acid and alkali resistant: pass Melting point:155 Melt flow rate:30 (180 g/10min) 1 m height cardboard-barrel
- Nano Electrostatics Powder Coatings - Water based nano iron rust converter primer - Antibacterial aromatic nano structure paints
tgic polyester powder coating, Payment Terms : T/T, Bank or Wire Transfer Upfront Upon Proforma Invoice Pricing, Total or Minimum order Quantity , Quality and Delivery time get back to us so we can provide all those for you if interested. Regular others also have added advantages, Bulk orders as well.
The main activities of the company: tin roofing, facade coating, production and installation of rainwater collection systems, powder coating, laser cutting, production of tin products.
with electrostatic powder coating ideology for coating metal material
Finished thermal atm rolls paper coating chemicals Type: a+b type, two component Effective constituent: chemical a is the dye, chemical b is the color developer, filter and other auxliiary agent. Product appearance: white pulpiness liquid. Solid content: 40%+-1 after mixed. Effective substance content: >99.90% Density: g/cm*3 1.0-1.2 Viscosity(cps):
Description 1. Weight: 48gsm, 50gsm, 52gsm, 55gsm, 58gsm, 60gsm, 65gsm etc. 2. All size is available; 37mmx50mm, 37mmx70mm, 44mmx50mm, 44x70mm, 44x76mm, 57mmx50mm, 57mmx57mm, 57mmx76mm, 76mmx70mm, 76mmx76mm, 80mmx60mm, 80mmx70mm, 80mmx80mm, etc; 3. All core is available: cardboard core, plastic core; 4. Packing: 50-100rolls per carton or as your request. 5. High brightness, good in toughness and seamless, deep thermal image; 6. Neat end surface, good in tightness, convenient and practical; 7. Worldwide universal core, handsome and practical; 8. Various specifications of thermal rolls available, can be made as per customers' requests.
1. Process safety instructions 1PVDF has good fire resistance and smoke inhibition property, however, when meets with fire, it will release toxic hydrogen fluoride gas and fluorocarbon compounds; 2Operators should take good care of personal protection during production. 2. Packaging and storage 125 kg and 250 kg packages can be provided. PVDF is packed in double layer of polyethylene plastic bag and then put into a hard cardboard drum. 2It must be stored in clean, cool, dry place.
3pc spilit trunnion forged ball valvethe side entry trunnion mounted ball valve has been designed two piece body type or three piece body type and with two floating seats, which are movable under the pressure of medium. Under the bottom of seats, seat pre-loading springs are positioned to ensure two floating seats can attach the ball's surface tightly, other more, pressure of medium also can push seats to attach ball tightly to ensure sealing more reliable. The trunnion ball valve is equipped with a movable seat seal ring which can generate displacement under the pressure of medium. In case that any medium pressure exists, the pressure will press the valve seat seal ring onto the ball tightly, guaranteeing the sealing performance of the ball valve. Design features The ball valve are designed in accordance with iso14313, api 6d, bs 5351, gb/t 19672; Simple structure with good sealing performance and small torque; Full bore and reduced bore design with the minimum flow resistance (zero actually); Emergency sealant injection; Cavity pressure self relief; Independent ball and stem; Low emission packing; Fire safe, anti-static and anti-blowout stem design; Valve seat function dbb, dib-1, dib-2; Optional extended bonnet.
TPU TPU (Thermoplastic polyurethanes) is a highly versatile elastomer with unique properties that offers both superior performance and processing flexibility. TPU is the ideal polymer for applications in a wide variety of markets, including footwear, wire and cable, film and sheet, compounding, adhesives and specialty molded parts. TPU is a unique type of plastic bridging the gap between rubbers and plastics. The key to TPU's versatility is that its hardness can be highly customized. TPU can be as soft as rubber or as hard as rigid plastics. The look and feel of TPU is just as versatile. It can be transparent or colored as well as smooth to the touch or provide grip. Used for : utomobile parts: ball coupling, dust cover, pedal brake, door lock pin, bushing, plate spring bushing, bearing, shockproof parts, internal and external decorative parts, anti-slip chain, etc.Mechanical and industrial parts: all kinds of gears, seals, shockproof parts, mold needles, bushings, bearings, covers, connectors, rubber screens, printing cots, etc.Others: footwear, pipe, hose, film, plate, wire, cable, all kinds of annular pipelines, all kinds of containers, ink connection materials, etc.
A powder curing oven is a specialized oven used in the powder coating process to cure or bake the powder coating onto the surface of a workpiece. After the powder is electrostatically sprayed onto the workpiece, it is transferred to the curing oven. The curing oven heats the workpiece to a specific temperature for a certain amount of time to melt and fuse the powder particles, creating a durable and smooth coating. The powder curing oven typically has a conveyor system to transport the workpiece through the oven, and may have multiple heating zones to ensure a consistent and even cure. The oven is designed to maintain a controlled temperature and environment for the curing process. Powder curing ovens are used in various industries, including automotive, aerospace, and construction, and are an essential component of the powder coating process. Energy options: Gas, LPG, Electric, Coal, etc.
BOST-MP01 is a tiny ball of insulating material with moderate hardness, which is sprayed on the surface of the coated glass to prevent scratches between the coated glass. The material does not cause any corrosion to the film of the coated glass and the gap between the glass after lamination is similar to the thickness of the paper, but the cost is about 1/6 of the paper, and products could be removed with a soft brush and is also easily washed off by water. lt has been widely used in coated glass sheets. Technical Data: Product description: White powders Hardness:90-110 N/mm�² PH of aqueous solution: 6.0~8.0 Moisture content: < 0.5% Angle of repose: < 40ï¼? Main particle diameter: 100 mesh (150 um) +60 mesh(250um)< 5% +140 mesh(105pm)>80% +200 mesh(74um) > 95%-200 mesh(74um)
Kristall Ultimate Film is designed for glass surfaces. With its unique 3D curved technology, phones can be protected from edge to edge, even with curves. It provides a long-lasting shine that is easy and quick to use and will repel tiny particles of dirt and other environmental contaminants. Remark: Price is FOB Malaysia only.
Kristall Nano Smartphone Coating is your one stop solution if you want to protect your phone. After applying the coating, you dont have to worry about scratches, or shattering, or even water. Your screen surface will no longer need regular cleaning as the invisible coatings will create an easy to clean effect meaning that water and debris will no longer stick on the smartphones surface. Remark: Price is FOB Malaysia only
