Description: 1.Panel: to be designed at will 2.Top edge outside height: 30 mm 3.Pedal height: 100 mm 4.Spacing bar outside height: 25 mm 5.Wall thickness: 76mm (dimension between two panels) 6.The blinds can be installed in the middle of two pieces of glasses 7.Aluminum profile weight: 3kg~5.4kg/m2 8.Aluminum profile thickness: 1~1.3mm 9.Aluminum alloy:6063-t5 Standard exporting packing
PVC laminated gypsum ceiling board
2.Wt:2.5-75mm 3.Standard: Gb astm bs jis din en...... 4.Grade: Transportation of oil, gas or fluid, construction, electricity, machine building industry, chemical industry, petroleum, traffic. Advantages: A).Our company produce various specification and models and national standards of seamless steel pipe for ship B) using high-quality material and advanced production technology and equipment for processing C). Applicable to a humid climate and the harsh corrosive environment. Major products: seamless steel pipe(especially big size seamless steel pipe), welded steel pipe, elbow, tees, reducers, flanges
Materials: SMLS steel. Outer diameter: 14mm~630mm. Wall thickness: 2.5mm~35mm. Length for each pipe: 5.8m, 6m, 11.8m, 12m, Random length, or as required. Processing Methods: Hot rolled. Cold Rolled. Cold drawn. Delivery conditions: N-(normalizing); A-(annealing); T-(tempering); Q-(quenching); N+T; Q+T.etc. Ends: flat end or beveled end, threaded end. Protected by plastic caps or steel rings. Standards & Grades: GB/T8162 20#, 35#, 45# Q345, Q345B, Q345C, Q345D, Q345E, 20Mn2, 30Mn2, 40Mn2, 20CrMo, 30CrMo, 35CrMo, 42CrMo; GB/T8163 20#; GB/T3087 10#, 20#; GB/T5310 20G, 20MnG, 25MnG, 15CrMoG, 12Cr1MoVG; GB/T9948 20#, 16Mn,12CrMo, 15CrMo; GB6479 20#, 16Mn, 12CrMo, 15CrMo; ASME SA213 T5, T9; API 5L, A, B, X42, X46, X56, X60, X65; ASTM A106, ASTM A53 Gr B; SA210, SA178, SA192, SA335, T2/P2, T11/P11, T12/P12, T22/P22, T91/P91; DIN 17175 ST35.8, ST45.8, DIN1629; API 5L Gr.B, X42-X70; ISO 11960, GOST, API 5CT J55 K55 N80-1 N80-Q L80-1 L80-9Cr P110, etc.
All sinoars welding studs and ceramic ferrules are manufactured by our advanced production equipment and technologies, our strict quality control system ensure each pieces of studs are in accordance with the standard of iso 13918 and aws d1.1 or customers’s special requirements. Benefits from our continuous r&d, our products can meet our customers’ development production requirements. Size:110cm*80cm*75cm Weight:1.3tons
Widely used in car wash shop, trench cover, factory walkway and stair, green belts etc. Places 25#: 13kg/sq.M 1.22*3.66m 30#: 15kg/sq.M 1.22*3.66m 38#: 20kg/sq.M 1.22*2.44m
Raw material: resin and fiberglass 25#: 13kg/sq.M, 1.22*3.66m 30#: 15kg/sq.M, 1.22*3.66m 38#: 20kg/sq.M, 1.22*2.44m
APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.
This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites. Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature. Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts. PREPARATION OF FURANE MORTAR : Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life. Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.
Building construction material
Nano Aluminum Composite Panel Construction and Decoration Material Aluminum Composite Panel Aluminum Composite panel(ACP)  1. Standard: according to GB/T 17748-1999 standard  2. Material: a) Front: aluminum alloy sheet coated with fluoro-carbon resin  (PVDF) and polyester resin (PE) roasting painting b) Core: nontoxic polyethylene. c) Back: aluminum alloy sheet coated with polyester resin painting d) Surface finish: treated with PVDF and PE resin rolling roasting .  coating e) Surface coating thickness: 30um f ) Aluminum alloy sheet thickness: 0.1mm, 0.12mm, 0.15mm, 0.2mm, 0.3mm, 0.4mm, 0.45mm, 0.5mm  3. Dimensions: a) Thickness: 3mm, 4mm b) Width: 1220mm 1500mm.. c) Length: 2440mm, 3200mm, 4000mm,5000mm (max: 6 meter) d) Weight: 5.5kg/sqm based on 4mm thickness. e) Standard size: 1220 x 2440mm f) Nonstandard sizes are available according to requirement of customers  4. Application scope: 1) Building exterior curtain walls.. 2) Decoration and renovation additions for old buildings 3) Decoration of interior walls, ceilings, bathrooms, kitchens and balconies 4) Shop door decorations 5) Advertisement board display platforms and signboards 6) Wallboards and ceilings for tunnels.. 7) Industrial materials, materials for vehicles and boats More information you can view here.
Coal fly ash; Grade 1/2/3; Standard GB1596-91; Large quantity and low price are available for you
er. 3) Good rubber elasticity, elongation and shear stress. 4) Good low-temperature property. 3.Application: 1) Widely used in the industrial and civil building roofing, underground, pool, tunnel, wooden and metal roofing. 2) Specially applied in the chemical factory, garment factory, and granary. 3) Especially used in cold places. 4) Tape used for sealing all construction material surfaces. Length: customized Width: 1000,2000mm Thickness: 1.2 to 4.0mm
Prefabricated buildings, cold rooms, telecom shelters, inverter room, puff panels, guard huts, security room, clean room.Prefabricated buildings, cold rooms, telecom shelters, inverter room, puff panels, guard huts, security room, clean room
Cement, clinker, fly ash bricks, dolomite, construction materials, fly ash, mineral powder, limestone.
1) excellent weatherability, durability and size stability. 2) good adaptability to high and low temperature, uv resistant and anti-corrosion. 3) high tensile strength and good elongation, accommodating to structure movement. 4) easy to install, solid joint and no environment pollution. 5) good rooting penetration resistance. 6) service life up to 50 years. Packed on roll in woven bags
Density¡êo2790-3070 kg/m3 Compressive strengtho1000-3000 kg/cm2 Modulus of elasticityo1.3-1.5x106 kg/cm3 Water absorptiono0.13 % Shore hardnesso> hs 70 Specific gravityo2.6 Wooden packaged, as customer demands
Construction Equipments
Polyvinyl Chloride, or PVC, is widely used for plastic construction materials thanks to being inexpensive and durable. As a building material, it is often used for pipes and fittings, flooring, window and door profiles and roof membranes. For specification, price and other details please contact us.
Capacity: 0.5ton, 1ton, 1.5ton, 2ton, 3ton, 5ton, 10ton, 20ton, 30ton, 50ton Bayi hoist, leading supplier of material lifting equipment and appratus, including manual hoist, electric hoist, running trolley , mini crane, permanent magnet lifter, loading chain, hooks. Company description Professional supplier of manual hoist, hand operated hoist, chain block, level block, manual trolley, electric hoist, electric wire rope hoist, electric chain hoist, running mini electric hoist, running trolley, multifunctional lifting hoist, mini crane, permanent magnet lifter, loading chain. You can contact sale1atbayihoistdotcom for more details. Export wooden carton or oem
