Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
Sodium Propionate, E281, CAS no.137-40-6, a white crystalline solid or powder that is the sodium salt of propionic acid. Sodium Propionate manufacturing process via chemical synthesis of propionic acid and sodium carbonate or sodium hydroxide as raw materials. Sodium Propionate is used in the food and beverage industry as a preservative. It prevents the growth of mold and some bacteria, thereby prolonging the shelf life of packaged baked goods. Used as a mold inhibitor in bakery products, such as breads, yogurts, soups, drinking yogurts, canned vegetables, etc. As an experienced Sodium Propionate manufacturer and supplier, we has been supplying and exporting Sodium Propionate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Sodium Propionate powder Specification Product Sodium Propionate CAS 137-40-6 INS 281 Structure Molecular formula C3H5NaO2 Properties White crystals, particles or crystalline powder;Odorless or slightly ethyl butyrate smell.1g of this product can be dissolved in 1ml of water,25 or 24 ml of ethanol. Quality Specification Standard Item GB25549-2010 BP2012 FCCV USP35 EP7.0 Content dry basis 99.0%~100.5% 99.0%~101% 99.0%~100.5% 99.0%~100.5% 99.0%~101% Loss on drying (Vol. 4) 1.0% 0.5% 1.0% 1.0% 0.5% Water-insoluble matter Clear, olorless Clear, olorless PH 10 7.8~9.2 7.8~9.2 As(as As203) 3 mg/kg Heavy metals (as Pb) 4 mg/kg 10ppm 2 mg/kg 0.001% 10ppm Fe 0.003% 10ppm 0.003%10ppm Alkalinity (Na2CO3) passed test 0.15% passed test
Soy Dietary Fiber, Cas no.9004-34-6, also known as textured vegetable protein, is initially manufactured from concentrated soy flour, a white colored powder. Soy Dietary Fiber contains a high amount of dietary fiber, and has a high water absorption capacity. It functions as a moisture retention agent, and cooking loss reduction agent to meat product formulations. Soy Dietary Fiber is is used in various food products, including in sausages, burgers, bakery products, Tomato paste(ketchup), jam, juice, chopped meat, nutritional food products, condiments and animal foods. As an experienced Soy Dietary Fiber manufacturer and supplier, we has been supplying and exporting Soy Dietary Fiber for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Soy Dietary Fiber Specification The functional soy dietary fiber is drawn from the cell wall material of soybean cotyledon. It is composed of a complex insoluble fiber, soluble fiber and protein. It gives its special properties of higher water binding and absorption to the food industry especially in the Sauce Products like Tomato Paste, Ketchup, Mainline Breads and Rolls, Light Breads and Rolls, Frozen and Refrigerated Doughs, and Cakes and Sweet goods. And it is also introduced as one of excellent source of dietary fiber that brings great benefit for human body health. It is recommended for usage with soy protein together for cost effective purpose in meat industry. Edible fiber 65% Min Moisture 10% Max Fat 1% Max Protein(N6.25 mfb) 20% Max E-coli Negative Salmonella Negative Stardard Plate Count 30,000 pc/g Max Yeast&mold 100/g max Appearance: Cream white powder, with mild smellPacking: Paper-poly-conglutinated bag, Net Weight 20 kg.Storage: below 75 and 60% relative humidity promotes longer shelf life. Shelf life: one year.
Categories Aromas Qty in 20' FCL 14400kg Min Order 500kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC CAS No. 8006-90-4 HS Code 290611 Specification FCC/USP Ethyl Acetate, E1504, CAS No.141-78-6, with chemical formula C4H8O2. manufacturing process through ethanol and acetic acid, safe food additives, used as aromas & perfumes. Function: Ethyl acetate is the ester of ethanol and acetic acid, it is manufactured on a large scale for use as a solvent. This colorless liquid has a characteristic sweet smell (similar to pear drops) and is used as a solvent in oil-based lacquers and enamels, in inks and adhesives and as a process solvent. As an experienced Ethyl Acetate manufacturer and supplier, we has been supplying and exporting Ethyl Acetate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Ethyl Acetate Food grade Specification ITEM STANDARD Appearance Colourless transparent liquid Assay (%) 99.5 Loss on drying (%) 0.1 Acidity (as Acetic, %) 0.004 Density (g/cm3) 0.897 0.902 Evaporation Residue (%) 0.001 Color (Apha) 10 Distillation range () 76.0 79.0 Ethanol (%) 0.04 Arsenic 3 mg/ kg Lead 2 mg/ kg Mercury 1 mg/ kg Heavy Metals (as Pb) 10 mg/ kg
Glycine, E640, CAS No.56-40-6, a nonessential amino acid, manufacturing process via chemical synthesis from formaldehyde or monochloroacetic acid and ammonia. Glycine is used in Soy sauce/Vinegar/Cooking wine/Vegetables pickled in soy sauce/Noodles/Hamburg/ Fish and Vegetable product as flavoring and nutrient supplement. As an experienced Glycine manufacturer and supplier, we has been supplying and exporting Glycine for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Glycine food grade Specification ITEM STANDARD Apperance White Crystals crystalline powder Identification Positive Assay( C2H5NO2) % ( on dried matter) 98.5-101.5 pH Value(5g/100ml in water) 5.6-6.6 Heavy Metals(As Pb) % 0.001 Loss on drying % 0.2 Residue on ignition(as sulphated ash) % 0.1 Chloride(As Cl) % 0.02 Sulphate(As SO4) % 0.0065 Ammonium(As NH4) % 0.01 Arsenic( As As) % 0.0001 Lead ( As Pb) % 0.0005 Glycine tech grade Specification ITEM STANDARD Apperance White Crystals crystalline powder Assay( C2H5NO2) % ( on dried matter) 98.5 pH Value(5g/100ml in water) 5.5-7.0 Iron(FE) % 0.03 Loss on drying % 0.3 Residue on ignition % 0.1
Tri Creatine Malate, CAS No.52940-87-6, manufactured from Creatine and Malic Acid. The most commonly used form of Creatine is Creatine monohydrate. Tri-creatine malate is an alternate form in which three molecules of creatine are bound to one molecule of naturally occurring malic acid, used as nutritional supplements. Tri-Creatine Malate is a white, odorless white powder, commonly used in sports drinks, energy bars and other nutritional snacks. As an experienced Tri Creatine Malate manufacturer and supplier, we has been supplying and exporting Tri Creatine Malate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.
Polysorbate 80, also called Tween 80, E433, CAS No.9005-65-6, Molecular Formula C64H124O26, a polysorbate surfactant, manufacturing process via chemical synthesis, lauric acid and oleic acid as the raw materials, available as Lemon colored oily liquid. Food use: Polysorbate 80 is used as an emulsifier in foods. use in ice cream, polysorbate is to make the ice cream smoother and easier to handle. Health and beauty use: Polysorbate 80 is also used as a surfactant in soaps and cosmetics (including eyedrops), or a solubilizer such as in a mouthwash. As an experienced Polysorbate 80 manufacturer and supplier, we has been supplying and exporting Polysorbate 80 for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Polysorbate 80 Specification PRODUCT NAME: T80 POLYOXYETHYLENE (20) SORBITAN MONOOLEATE1. APPEARANCE: yellow clear oily liquid.2. OTHER NAMES: Tween 80; Polysorbate 803. HLB VALUE: 15.04. MOLECULAR FORMULA: C64H124O265. TECHNICAL SPECIFICATION Parameters Unit Standard Value Acid value mg KOH/g â?¤2.0 Saponification value mg KOH/g 45~55 Hydroxyl value mg KOH/g 65~80 Moisture w/% 3.0 residue on ignition w/% 0.25 Arsenic mg/kg 3 Pb mg/kg 2 Oxyethylene w/% 65.0~69.5 6. PACKAGING:25kg, 220kg/ plastic drum net weight. (Other packages are available upon request.)7. INSTRUCTIONS ON USE AND STORAGE(1) Application Used as emulsifier and stabilizer in food, cosmetic, and other industry.(2) Storage and preservation Preserved dry, cool, avoid sunlight.8. SHELF LIFE:1 year
Magnesium chloride is a chloride chemical formula MgCl2 colorless and easily deliquescent crystal soluble in water Magnesium chloride hydrate can be extracted from brine or seawater usually with 6 molecules of crystal water but it loses crystal water when heated to 95C begins to decompose when it is above 135C and releases hydrogen chloride HCl gas Product Parameters TEST ITEMS TEST STANDARD MAGNESIUM CHLORIDE ANHYDROUS MAGNESIUM CHLORIDE HEXAHYDRATE MAGNESIUM CHLORIDEAs MgCl2 990 460 CALCIUM As Ca2 0002 015 SULFATE As SO42 100 ALKALI CHLORIDE As Cl 050 WATER INSOLUBLE 02 010 MOISTURE 02 FE 0005 NA 0002 MGO 05
Description of Formic Acid Popular Name: Methanoic acid or Formic acid Formula: HCOOH CAS NO.: 64-18-6 Dangerous Goods Class: 8 Classification: Carboxylic acid Molecular Structure: HCOOH Appearance: clear & transparent liquid Packange of Formic Acid 25kg/35kg/250kg/1200kgs IBC drums, ISO tank Usage Formic Acid 85% widely used in pharmaceutical industry, leather industry, printing and dyeing industry, chemical industry, rubber industry, steel industry, paper industry, pesticide industry, food industry, poultry industry etc.
L-Aspartic Acid, CAS No.56-84-8, is the L-isomer of Aspartic Acid, available as White crystalline powder. L-Aspartic Acid is an essential amino acid for building proteins. So itâ??s widely used as nutrition supplements. L-Aspartic acid is also an important material in manufacturing of aspartame. As L-Aspartic Acid Manufacturers, Suppliers and Wholesalers in China , we supply food and feed grade L-Aspartic Acid, also D-Aspartic Acid and DL Aspartic Acid. As an experienced L-Aspartic Acid manufacturer and supplier, we has been supplying and exporting L-Aspartic Acid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. L-Aspartic Acid Food grade Specification DESCRIPTION White, oderless crystals or crystalline powder having a slightly acid taste. It is slightly soluble in water but insoluble in alcohol and in ether.It melts at about 270. Chemical Name L-Aminosuccinic Acid Molecular Formula C4H7NO4 Structural Formula Molecular Weight 133.10 SPECIFICATION (FCCVII) Identification Corresponds Assay(as C4H7NO4)è?½ 98.5% â?? 101.5%(Calculated on the dried basis) Heavy Metals(as Pb) 10mg/kg Max Lead 5mg/kg Max Loss On Drying 0.25% Max Residue on Ignition 0.1% Max Specific Rotation +24.5 ~+26.0(after drying) Arsenic(as As) 2mg/kg Max MAIN FUNCTION AND PURPOSE L-Aspartic acid can be added into cool drinks as nutrition supplement. It is used in medicine as ammoniac detoxicating agent, hepar function accelerator or fatigue refresher. And it can also be used in biochemical reagent, medium and intermediate in organic synthesis. PACKING 25KG net in Plastic Woven Bag lined with PE bag, 18MT/20FCL(on pallet) or 20MT/20FCL(without pallet). STORAGE Kept airtightly in a light-proof, dry and cool place.
Dl Aspartic Acid, CAS No.617-45-8, is a mixture of L Aspartic Acid and D Aspartic Acid manufactured through fermentation, available as white powder. Dl Aspartic Acid is an amino acid widely used in nutritional supplements, nutrition enhancers, dietary supplements, health food additives, pharmaceutical raw materials, sports supplements, sports nutritional supplements, and bodybuilding supplements. As an experienced Dl Aspartic Acid manufacturer and supplier, we has been supplying and exporting Dl Aspartic Acid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Product Description Categories Amino Acids Qty in 20â??FCL 10000kg Min Order 500kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC CAS No. 1783-96-6 HS Code 292249 Specification Feed/Food Grade
Stearic Acid, E570,CAS No.57-11-4, is a saturated fatty acid with an 18-carbon chain manufactured through hydrolysis of triglycerides, available as WHITE FLAKE or white powder used as lubricants, softening and release agents in food production with E number E570. It is also essential ingredient in manufacturing of Potassium Stearate, Sodium Stearate and Glycerol Monostearate. Stearic acid is mainly used in the production of detergents, soaps, and cosmetics such as shampoos and shaving cream products. As an experienced Stearic Acid manufacturer and supplier, we has been supplying and exporting Stearic Acid for almost 10 years. Please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Stearic Acid Specification INDEX SPECIFICATION APPEARANCE WHITE FLAKE IODINE (g/100g) 2.0 ACID (mg/g) 205 ~ 210 SAPONIFICATION NUMBER 206 ~ 211 HAZEN 200 TITER(C) 54 ~ 57 MOISTURE 0.2% INORGANIC ACID 0.001% C18 CONTENT 40 ~ 45 %
a. Name of product : Mango b. Price of product : Euro 15/box of 12 c. Product origin : Gujarat (India) d. Key Specifications/Special Features e. Harmonization System (HS) Code :20089911, 20079910 f. Minimum Order Size : 500 boxes g. Packaging details : Export Quality Secure Packaging Gir Kesar mangos, locally called Kesar, means Saffron, Kesar, one of the world's high-cost spices. Kesar Mango is grown in Gujarat with firm saffron-colored pulp with a sweet taste & aroma. It is called with the name Kesariya Aam or Kesar no Kairi in Gujarat locally. There may be a small acidic range with a sour taste in unripe or less mature Fruit, but lots of folks enjoy the medium to big sized mango fruit, with a minimal fiber in its flesh of Fruit. This farmland was situated in the Girnar range mountains' foothills and situated in Junagadh and Amre li districts. The yield of these fruits is in some lakh tonnes in Gujarat. Kesar Mango tree Orchards are distributed across 20,000 hectares of land, which is with fertile soil. Farmland I s fertile, with a mix of red black rich soil, with a range of minerals for the growth of this Fruit like Calcium, Potash, magnesium, and other minerals in Gujarat, western India. Aam bagh is in the Arabian sea center at one side and another side range of Girnar mountains. This help for the Mango trees' growth helps block the Arabian Sea's salty windy breeze by elevating the Girnar range. They packed in the unripe or semi-ripe condition that faces travel time. Fruits will ripe to full yellow-orange saffron Hue color with sweet and smell after arrival as per their aging process. Generally, it takes one to four days to ripen once it reaches home. Please open the box to arrange all mangoes on the floor with a haystack with mango box. These process ripe fruits in 6 to 8 days have a close watch on mangoes. Packed as per SOP & sent in Semi Ripe, it avoids Fruit damage due to ripening in transport.
a. Name of product : Alphonso Mango b. Price of product : Euro 15/box of 12 c. Product origin : Gujarat (India) d. Key Specifications/Special Features e. Harmonization System (HS) Code :20089911, 20079910 f. Minimum Order Size : 500 boxes g. Packaging details : Export Quality Secure Packaging Gir Kesar mangos, locally called Kesar, means Saffron, Kesar, one of the world's high-cost spices. Kesar Mango is grown in Gujarat with firm saffron-colored pulp with a sweet taste & aroma. It is called with the name Kesariya Aam or Kesar no Kairi in Gujarat locally. There may be a small acidic range with a sour taste in unripe or less mature Fruit, but lots of folks enjoy the medium to big sized mango fruit, with a minimal fiber in its flesh of Fruit. This farmland was situated in the Girnar range mountains' foothills and situated in Junagadh and Amre li districts. The yield of these fruits is in some lakh tonnes in Gujarat. Kesar Mango tree Orchards are distributed across 20,000 hectares of land, which is with fertile soil. Farmland I s fertile, with a mix of red black rich soil, with a range of minerals for the growth of this Fruit like Calcium, Potash, magnesium, and other minerals in Gujarat, western India. Aam bagh is in the Arabian sea center at one side and another side range of Girnar mountains. This help for the Mango trees' growth helps block the Arabian Sea's salty windy breeze by elevating the Girnar range. They packed in the unripe or semi-ripe condition that faces travel time. Fruits will ripe to full yellow-orange saffron Hue color with sweet and smell after arrival as per their aging process. Generally, it takes one to four days to ripen once it reaches home. Please open the box to arrange all mangoes on the floor with a haystack with mango box. These process ripe fruits in 6 to 8 days have a close watch on mangoes. Packed as per SOP & sent in Semi Ripe, it avoids Fruit damage due to ripening in transport.
Molecular Formula: Na2O SiO3 Cas No.: 6834-92-0 Appearance : white, uniform, beaded. Characteristics: This product possesses high alkaline and defoul character, which is easy to soluble in water, good dispersibility and emulsifiability, not soluble in alcohol. Na2O - 28.0-30.0% SiO2 - 27.3-29.2% Whiteness - 80% Min Fe - 100ppm Max Bulk density - 0.80-0.97g/cc Particle Size(14-60mesh) - 90% Min
DL-Malic Acid, E297, CAS no.617-48-1, is a isomer of L-Malic Acid manufactured through chemical synthesis, available as White crystals or crystalline powder. DL-Malic Acid used in foods such as wines, beverages, fruit juices and chewing gums. Malic acid can be added in cool drinks, powder drinks, lactic acid drinks, milk drinks and fruit juice drinks to improve their tastes and flavors. Malic acid is often added together with Aspartame, an artificially synthesized dipeptide sweetener, into soft drinks as the flavor stabilizer. As an experienced DL-Malic Acid manufacturer and supplier, we has been supplying and exporting DL-Malic Acid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. DL-Malic Acid Specification ITEMS STANDARD Appearance White crystals or crystalline powder Assay 99.0 100.5% Specific Rotation -0.10 o +0.10 o Residue on ignition 0.10% max Water-insoluble substance 0.1% max Fumaric Acid 1.0% max Maleic Acid 0.05% max Heavy metals(as Pb) 10 ppm max Arsenic(As) 4 ppm max
Fumaric Acid powder, E297,CAS No.110-17-8, food acidulent, a common food additive included in many processed foods to keep them stable and to add tartness. Fumaric acid is used as a flavoring, because it is the sourest tasting of the organic acids. used as a food acidulent, in Bakery:Tortillas,Breads; Beverages: Fruit Juice Drinks, Wine; Confectioneries:Jellies and Jams;Desserts:Alginate Based Desserts,Gelatin Desserts,Pie Fillings,Egg White Foams; Animal Feed and Industrial Uses. As an experienced Fumaric Acid manufacturer and supplier, we has been supplying and exporting Fumaric Acid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Fumaric Acid Food Grade Specification DESCRIPTION White, odorless granules or crystalline powder. It is soluble in alcohol, slightly soluble in water and in ether, and very slightly soluble in chloroform Chemical Name Trans-butenedioic acid Chemical Formula C4H4O4 Structural Formula Molecular Weight 116.07 Solubility (g/100g) in water at 25 0.7 in water at 100 9.8 in alcohol at 30 5.76 in dimethyl benzene at 20 0.03 SPECIFICATION (Executive Standard: GB 25546-2010,also meets the international standards of FCC,USP ect.) Assay(as C4H4O4) 99.5%~100.5%(anhydrous basis) Melting Point 294~300 Arsenic(as As) 2mg/kg Max Lead 2mg/kg Max Maleic Acid 0.1% Max Residue on Ignition 0.1% Max Water 0.5% Max
Lactic Acid Liquid, E270, CAS no.50-21-5, Chemical Formula C3H6O3, is a carboxylic acid manufacturing process through fermentation from corn starch. The lactic acid is a yellowish to colorless liquid, property having a mild acid odor and taste. Many bacterial species produce lactic acid, with Lactobacillus, Bifidobacterium, Streptococcus, Pediococcus and Leuconostoc. Lactic acid used as acid ingredient in sour dairy products, fermented fruits and vegetables and in sausages. As an experienced Lactic Acid Liquid manufacturer and supplier, we has been supplying and exporting Lactic Acid Liquid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Lactic Acid Specification Lactic acid food grade specification ITEM STANDARD APPEARANCE YELLOWISH LIQUID ASSAY 80% MIN HEAVY METALS(AS Pb) 0.001% MAX IRON 0.001% MAX ARSENIC 0.0003% MAX CHLORIDE 0.2% MAX SULPHATED ASH 0.1% MAX RESIDUE ON IGNITION 0.1% MAX SUGAR PASS TEST Lactic acid Pharma Grade specification ITEM STANDARD Content % 85-90 chloride % 0.002 sulphate % 0.01 iron % 0.001 residualon ignition 0.1 heavy metal % 0.001 arsenate % 0.0001 free carbonizing % no brown color at interface reducing sugar % no red sediment
Contains omega-3 (up to 12%) and omega-6 (up to 19%), eicosanoic acid (up to 14%), erucic acid (up to 50%), oleic acid (up to 30%). Contains vitamin complex: group B vitamins, vitamins E, K, D, A, P. Helps to stay away from coronary heart diseases It can be used as an antibacterial oil Helps to detoxify human body Helps to reduce hair fall through improved blood circulation if it is massaged on scalp Stimulates digestion, circulation and excretory system It can be used as an irritant for stimulating sensation in senseless organs and muscles. Irritants are also useful for driving up muscles. Helps preventing fungal growth, thus it can be used as anti-fungal Helps in winter for making body warm and
Moisture: 13 % Ash: 0,54 % Raw Gluten: 30 % min Falling number: 280 - 300 sec Water Absorbtion: 63 % Peak: 5-6 min Relaxation: 5 mm Protein 100g: 11 g Acidity: 1,8 Feature: High nutritional value Premium quality Long shelf life very low in fat Natural taste and hygiene Rich taste Unadulterated Available in different size of packaging Free from impurities Uses: As a Cereal with milk and sugar, Breads cookies cakes crackers macaroni
